Benutzeranleitung / Produktwartung 800 des Produzenten Maxtor
Zur Seite of 57
Maxtor OneT ouch ™ II Drive FireWire 800 Edition User’ s Guide EXTERNAL HARD DRIVE P/N: 20280400.
Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Drive Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Introduction 1 Introduction Thank you for selecting a Maxtor product. The new Maxtor OneT ouch TM II FireWire 800 Edition, with triple interfaces (FireWire 800, FireWire 400 and USB 2.0), lets you access high-end graphics, photos and video files quickly , and connect easily with other computers.
1 2 Drive Components Before installing your new drive, review the features shown in Figure 1. Refer to the capacity label on the front of the box of your Maxtor OneT ouch II drive to determine which model you have.
1 Introduction 3 System Requirements Macintosh • FireWire 800 requires Mac OS X 10.2.8 or higher and FireWire 800 (9-pin) equipped computer • Apple G4 processor or greater • Mac OS 9.
1 4 System Requirements Windows • FireWire 800 requires Windows 2000 or XP operating system and FireWire 800 (9-pin) equipped computer • Pentium III, 500 Mhz equivalent processor or higher • 200.
1 Introduction 5 About this Guide The following symbols and conventions are used in this guide: Maxtor Product Support Maxtor Corporation provides a comprehensive product support section on its web si.
2 6 Installing Y our Drive In this chapter you will install your Maxtor OneT ouch ™ II FireWire 800 drive, the EMC ® Dantz ® Retrospect ® Express backup software, and activate the Maxtor OneT ouch button for simple backups of your valuable data anytime you need them.
2 Installing Your Drive 7 Macintosh OS X Step 1. Install the Software Software installation: Do not press the Maxtor OneT ouch™ button until instructed by the User's Guide or installation software. Please quit all applications before starting the installation process.
2 8 13. After your Macintosh restarts, please remove the Maxtor Install CD from your computer . 14. Proceed to the next section: Connect the Drive. Step 2. Connect the Drive The Maxtor OneT ouch II drive connects to your computer using either a FireWire or USB interface.
2 Installing Your Drive 9 2. Plug the smaller end of the USB cable into the USB connection on the drive. Figure 2. Connecting to a USB Port The installation is complete and your Maxtor OneT ouch II dr.
2 10 2. Plug the other end of the FireWire cable into an available FireWire port on the back of the drive. The installation is complete and your Maxtor OneT ouch II drive is ready to use! If you did t.
2 Installing Your Drive 11 6. The remaining space will be allocated to a second partition that can be used for general storage, enter the name Maxtor Extra Storage. When finished, click the OK button. 7. A warning message will appear . Click the Partition button when you are ready .
2 12 By registering 1 your new drive, you will have the option of receiving product updates, special offers, and important information about other data storage solutions from Maxtor . Once you’ve made your selection, Retrospect Express will open and the Maxtor OneT ouch Setup screen will appear .
2 Installing Your Drive 13 Y ou may customize Retrospect Express to create backup copies of your files which will include revisions made on a daily basis. See the Retrospect Express User’ s Guide for Macintosh, included on the install CD. Y our hardware and software installation is now complete.
2 14 Step 2. Connect the Drive The Maxtor OneT ouch II drive connects to your computer using either a FireWire or USB interface. Make sure you know which interface is available on your drive and on your computer . Please install the software before you connect the drive.
2 Installing Your Drive 15 The Maxtor OneT ouch button, Power management, and OneT ouch Settings utility program are not supported for USB on the Macintosh. Y ou may , however , use your drive as external storage and utilize the Retrospect Express software to maintain backup copies of your files and complete system.
2 16 To connect the FireWire Cable 1. Plug one end of the FireWire cable into any available FireWire port on your computer or any other FireWire device that is connected to your computer . 2. Plug the other end of the FireWire cable into either of the available FireWire ports on the back of the drive.
2 Installing Your Drive 17 3. Click EasyScript . The ‘Welcome to EasyScript’ window will appear . 4. Click Next . The Backup media page will appear . 5. Select File backup set (hard disk) and click Next . The Backup frequency page appears asking you: ‘How often do you want to back up?’ 6.
2 18 3. Make sure Execute now is selected and click Execute . Retrospect will now start scanning your system, the Immediate Backup window will open and the backup process will begin. The first backup may take some time depending on the number of files in your computer .
2 Installing Your Drive 19 If, for some reason, the Maxtor screen does not appear: • Click the Windows Start button and then click Run . • Click Browse and find the drive named Install CD • Open Install CD , open Launch and click OK . The Select Language screen will appear .
2 20 11. Click Finish . The Retrospect Express HD Installshield Wizard will appear automatically . Y ou may see a message asking you to Please Reboot your computer .
2 Installing Your Drive 21 The W elcome to Maxtor OneT ouch Setup screen will appear and a Maxtor OneT ouch shortcut icon will appear on your desktop. 20. Eject the Maxtor Install CD from your computer . 21. Proceed to the next section: Connect the Drive.
2 22 To connect the USB cable 1. Plug the flat end of the USB cable into any available USB port on your computer . This USB logo ™ may help you identify a USB port. 2. Plug the square end of the USB cable into the USB connection on the drive. Figure 4.
2 Installing Your Drive 23 6. To register immediately , enter your information in the registration form provided and click Register . If you do not wish to register now , click Register Later . If you have already registered, click Already Registered.
2 24 Connecting with the FireWire Cable Do not plug a FireWire cable into the drive when a USB cable is already connected to the drive. The drive only operates with one interface at a time. To connect the FireWire cable 1. Plug one end of the FireWire cable into any available FireWire port on your computer .
2 Installing Your Drive 25 Y our new drive will appear in the same way as your other drives, with a letter assigned to it by the operating system. The assigned letter will vary depending upon the number of other drives connected to your computer . Make a mental note of this drive letter .
2 26 Installing Drivers Only This section describes how to install your new drive without installing Retrospect software. The Maxtor OneT ouch button feature will not function if you choose to install under this option.
3 Using Your Drive 27 Using Y our Drive Once installed, you can use your new Maxtor OneT ouch II FireWire 800 drive in the same way you use the other drives on your computer . Some of the basic ways you can use your new drive are: • Move or copy files or folders from your other drives, CD-ROMs, or other storage devices.
3 28 After a moment, the computer will recognize that your drive is connected and the drive icon will appear on the desktop of your Macintosh. To disconnect the drive from a Macintosh computer 1. From the desktop, drag the drive icon to the T rash. The drive will disappear from the desktop.
3 Using Your Drive 29 To name your drive on a Windows computer: 1. Open your My Computer icon (where your other drives appear .) 2. Right-click your new drive’ s icon and select Properties . The properties window will open. 3. In the Label section at the top of the window , enter a name for your drive.
3 30 It is strongly recommended that you: • Select the option to “Replace Corresponding Files” • Define a folder on the destination drive dedicated to your duplicate backups. Figure 1. Replace Corresponding Files Archiving Files Archive is another type of backup you can do with Retrospect Express.
3 Using Your Drive 31 3. Drag the file or group of files you wish to restore to the desired folder as you would to move or copy any other file. If you are not sure where the files you want to restore are located, use your operating system’ s Find command to search the drive containing the backup data.
3 32 4. Drag the Express User’ s Guide onto your Macintosh’ s hard drive. 5. Double-click the Express User’ s Guide to open it. Y ou will need Adobe Acrobat Reader installed to open the guide. If you do not have it, you can download and install it for free from Adobe’ s web site: www .
3 Using Your Drive 33 Click Next . The Step 1 Screen will appear . 5. Select the drive to copy your files from and click Next . The Step 2 screen will appear . 6. Choose the type of files to copy: Just Documents copies only documents you have created including your favorite files, bookmarks, and cookies.
3 34 The OneT ouch button may not function when Retrospect Express is already running. T o correct the problem, go to the File menu in Retrospect, and choose Quit .
3 Using Your Drive 35 Opening Retrospect Express HD Y ou can open Retrospect Express HD from either the Start Menu: • Start >Programs >Dantz >Retrospect Express HD From the System T ray: • Right-click the red Retrospect Express HD icon: OR Press the OneT ouch button Figure 12.
3 36 Restoring From Y our Backup At times, your critical data may be corrupted. Fortunately , Retrospect Express HD provides you with the ability to restore your crucial files. If you need to restore your entire computer , see “Restoring Y our Computer” on page 40.
3 Using Your Drive 37 If you manually cancel a backup, it is considered to be a fatal error . If the restore point has a yellow or red icon, you can right-click the restore point to show the operation log, which will show you more information about the error .
3 38 Creating Retrospect Express HD Duplicates A duplicate saves the most recent version of files, in their original format, and overwrites the previous version.
3 Using Your Drive 39 Restoring Files from a Duplicate Restoring files from a duplicate is as simple as drag and drop. 1. Open My Computer and double-click on the drive letter associated with your Maxtor OneT ouch II drive (or whichever drive you used to do your duplicate backup).
3 40 Restoring Y our Computer If disaster has struck and your system software is damaged or completely erased, this chapter provides you with step-by-step instructions on how to restore your system. 2 These steps will be successful only if you have backed up your system using Retropsect.
3 Using Your Drive 41 Most Macintosh computers are setup at the factory with only one partition per hard drive. If you did not have multiple partitions on any of your hard drives, all you have to do is reformat your hard disk(s) and re-install your Macintosh operating system.
3 42 11. Click Replace . Retrospect will scan your system (This may take a few minutes). The Restore from Backup window will appear , to confirm the source (your Maxtor OneT ouch II drive) and the destination (your Macintosh hard drive) for the restore.
3 Using Your Drive 43 6. Select the date that contains the restore point you wish to restore from. 7. Click the restore point you wish to restore from. 8. Click Next. Y ou are now asked which files and folders you wish to restore. 9. Place a check next to My Computer to select your entire computer for restore.
3 44 Macintosh The OneT ouch Settings utility does not work with USB using OS 9. Opening the OneT ouch Settings utility Go to the Applications folder on your Macintosh and open the Maxtor OneT ouch Settings . The Maxtor OneT ouch Settings window will appear .
3 Using Your Drive 45 Setting your Password 1. Click DriveLock Data Security 2. Enter and re-enter a Password Y our password must contain at least six characters and one digit. Y ou may also choose a secret question (from the list provided) and type in the answer .
3 46 When the erase process is complete, a window will appear with the message that the disk has unreadable. 6. For OS X : click Initialize... The Apple Disk Utility will open. To format your drive in OS X, see “Macintosh OS X” on page 22 in chapter 2.
3 Using Your Drive 47 The slider at the bottom of the screen controls the time period of inactivity before the all system hard drives will go to sleep. It is possible to choose as short as 10 minutes and as long as 60 minutes. Y ou can also set it to never go to sleep.
3 48 Run Diagnostics Y ou can check the health of your drive. If you suspect there may be problems with your Maxtor OneT ouch II drive, click T est to run a diagnostic on your drive.
3 Using Your Drive 49 Disable Security If you decide you want to disable the password you created, follow these steps: 1. Click Security Settings. 2. Click Disable Security . 3. Enter your current Password. 4. Click Apply . 5. Click Close. The default setting for the security setting is disabled.
3 50 Note: Y ou will need Adobe Acrobat Reader installed to open the guide. If you do not have it, you can download and install it for free from Adobe’ s web site: www .adobe.com Installing Applications on Y our Drive Y ou may install and run applications from your drive like any other drive on your system.
3 Using Your Drive 51 Adding Rubber Feet to Y our Maxtor OneT ouch II Drive If you plan to use your drive on a desk surface, your kit includes four rubber feet to protect your drive and the surface of your desk. To apply the feet: 1. Make sure your drive is disconnected properly from your computer .
4 52 Glossary Backup – In Restropsect HD, a backup contains all the files and folders you selected to back up from a specific point in time. Previous backups are preserved, allowing you to store copies of your backup files from multiple points in time.
4 Glossary 53 Mb – (Megabit) When used to describe data storage, equal to one million bits. Mbps – (Megabits per second) When used to described data transfer rates, it refers to one million bits per second. NTFS – The primary file system for Windows 2000 and XP operating system that organizes files on your computer .
54 Index A About this Guide 5 Adding Rubber Feet to 51 Your OneTouch II Drive Archiving files 39 B Backing up your computer 27 C Changing Your Maxtor 40 OneTouch Backup Settings Connecting and Disconn.
©2005 Maxtor Corporation. All rights reserved. Changes are periodically made to the information herein which will be incorporated in revised editions of this publication. Maxtor may make changes or improvements to the product(s) described in this publication at any time and without notice.
Ein wichtiger Punkt beim Kauf des Geräts Maxtor 800 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Maxtor 800 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Maxtor 800 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Maxtor 800 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Maxtor 800 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Maxtor 800 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Maxtor 800 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Maxtor 800. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Maxtor 800 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
