Benutzeranleitung / Produktwartung MM-6854 des Produzenten Maxon Telecom
Zur Seite of 65
MM-6854 / MM-6864 GSM Dual-Band Data Modem Application Notes MM-6854 MM-6864.
Published by Maxon Europe Ltd Maxon House Maxt ed Close Hemel Hempstead Herts HP2 7 EG United Kingdom Tel: +44 ( 0)1442 267777 Fax: +44 ( 0)1442 215515 e-mail data sales@m axon.co.u k Internet: www.maxon.co.uk Any queries regardi ng i nformation i n this manual, please contact the Technical Services Group Leader at the above address.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page i WARNINGS Internal com ponents conta ining ber yllium oxide ar e used i n the equi pm ent. Dust fr om this material is a health ha zard if inhale d or al lowed to com e into con tact with t he sk in.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page ii 03/00.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page i ii TABLE OF CONTENTS 1 INTRODUCTION 1 1.1 Overv iew 1 1.2 How this document is organised 1 1.3 Wh at are the M M6854/64 1 1.4 Recommend ed Proced ures 1 1.5 Cont act Informatio n 1 1.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page iv 03/00 5.1.31 AT+CE ER – Displa ys why last call was disc onn ec ted 20 5.1.32 AT+CMGD – Delete m essages 20 5.1.33 AT+CMG F – Mess age form at 21 5.1.34 AT+CMG L – List m ess ages 21 5.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page v 8.1.6 Set the loc ation i nform ation 45 8.1.7 Finish Insta ll ati on 46 8.1.8 Select Pro perties 46 8.1.9 Select Connec tion 47 8.1.10 Set Data B its, Parit y and Sto p bits 47 8.1.11 Select Fl ow Contro l and Sof tware (X ON/XOF F) 48 8.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page vi 03/00.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 1 1 INTRODUCTION 1.1 Overv iew This docum ent provides A pplic ation i nform ation for the MM-68 54/64 G SM Dual- Band Dat a Modem and refer s to sof tware ver sion 1. 07 on wards. This first s ection prov ides a bri ef ov ervie w of the pro ducts.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 2 03/00 1.6 Summary This section h as provid ed a bas ic intr oduct ion to the pr oducts ..
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 3 2 SPECIFICA TIONS 2.1 Basic Specificat ions Performa nce Specifi cations 91/2 63/EEC ETS 300 342-1 ETSI GSM 0707/0 5 AT comm ands plus Extended SMS G SM rec. 7.05 includin g PDU mod e GSM 04.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 4 03/00 General Specification s Temperat ure Range Operating Charging (Perfor mance without degradation unless stated) -20 to +6 0 ° ° ° ° C 0 to +4 0 ° ° ° ° C Power Consumption Standby 25mW Charging / On -air 4W max.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 5 3 SYSTEM A PPLICA TIONS Fleet Manag em ent Construction Trans por tation Anti-T heft Utilities Em er gency Serv ices Refriger ated T.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 6 03/00 3.1.1 GSM / GPS A pplication One exam ple of an applic atio n is send ing dat a and GPS inf orm ation via the G SM Net work.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 7 4 OPERA TION 4.1 Introducti on This section cov ers the s im ple operati on of th e modem s.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 8 03/00 Care sho uld be tak en to e nsure t hat the car d is cor rectly f itted an d is held in p lace. T his is accom plished b y fitting t he card (with the gold area facin g do wnwards) und erne ath the tw o lugs a nd then sliding the metal holder over the top of the card to secure it.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 9 4.6 Confirming Operation On Hyper Term inal, t ype AT D <Teleph one num ber you want to rin g> and press Car riage R eturn. The telep hone wil l ring. T he ans wer tone will be sim ilar to the on e, which you would rec eive, with a fax machine .
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 10 03/00.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 11 5 A T COMMA NDS Comm and Functio n Paragraph +++ Switch f rom data m ode to com m and mode 5.1.1 Page 12 A/ Re-execute t he las t comm and 5.1.2 Page 12 ATA Manual ans wer an inc om ing call 5.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 12 03/00 Comm and Functio n Paragraph AT+DR Data compres sion repor t 5.1.47 Page 27 AT+DS Data com press ion mode 5.1.48 Page 28 AT+FCLA SS Selec t, read or t est ser vice c lass 5.1.49 Page 28 AT+FMI Report Man ufactur er ID 5.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 13 5.1.3 A T A – Manually answer an incoming call The m odem does not autom aticall y ans wer an incom ing cal l (Defaul t setting) .
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 14 03/00 5.1.6 A TE – Command Echo This comm and is used to enable a nd dis able ec ho. Enter ATE0 ATE1 Response Disable ech o. Enable ec ho. Notes: None Result code s: OK ERROR 5.1.7 A TH – Hang up This comm and is used f or asynchro nous tr ansm ission onl y.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 15 5.1.9 A TO0 – Return to transparent mode ( switch from com mand mode to dat a mode). If y ou wis h to inter rupt the data f low onl y briefly, you can us e the AT O0 c ommand to r eturn your modem to the transp arent m ode, i.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 16 03/00 5.1.13 A TS2- Escape character T y ping AT S2? wil l disp la y the decim al value of the ASCII char acter used as the esc ape char acter. The def ault va lue (43) c orrespon ds to an ASCII <+>.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 17 5.1.18 A TS7 – Wait time f or carrier After dia lling, th is regis ter sets th e tim e that the modem must wait before hanging up if it f ails to detect the remote c arrier. Tim e is in secon ds.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 18 03/00 5.1.23 A TX – Defines CONNEC T results code format This comm and is used to define th e resul t code f or CONNECT . Enter ATX 0 ATX 1 Response Modem r eturns onl y the CONN ECT code as soon as a satisf actor y connection h as been s et up.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 19 5.1.27 A T&F – Restore default configuration This will forc e the m odem to load the def ault c onfigur ation. Enter Response Notes: Non e. Result code s: OK ERROR 5.1.28 A T&V – Display current conf iguration The m odem will displa y the curre nt conf iguration.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 20 03/00 5.1.30 A T+CBSTs,m,p – Select b earer service ty pe Selects the bearer servic e to be used when data cal ls are orig inated. S 0 1 2 3 4 5 6 7 65 66 68 70 71 Speed Not supporte d 300bps / V .
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 21 5.1.33 A T+CMGF – Message fo rmat This comm and allows you to def ine the i nput an d output f ormat of the short m es sage.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 22 03/00 5.1.35 A T+CMGR – Read mess ages This comm and is used to read S MS m essages. Enter AT+CMG R=<ind ex>,<d ata> Wh er e <index > <d ata> Response Integer indic ating th e locatio n of the SMS to be read.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 23 5.1.37 A T+CMGW – Write messages t o memory This comm and is used to store a SMS m ess age into the m em ory.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 24 03/00 5.1.39 A T+CNMI – Ne w Message This comm and allows you to det erm ine how the m odem shall n otif y the user when a S MS m essage is received f rom the network operat or.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 25 5.1.40 A T+CPIN – Enter PIN and query blocks This comm and is used to val idate the PIN code, or to validate the PU K cod e. Enter AT+CPIN ? AT+CPIN =<puk >,<ne w_p in> AT+CPIN =<pi n> Response Displa ys the current status of the PIN c ode.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 26 03/00 5.1.43 AT+CRLP – Radio Link Protoco l parameters This comm and lets you chan ge param eters for the r adio li nk protoc ol, used o nly for NON-trans parent data transm ission.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 27 5.1.46 AT+C SMP – Set text mode par ameters This comm and is used to select addit ional valu es, when a SMS is sent t o the n etwork , or plac ed in storage, when text f orm at.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 28 03/00 5.1.48 AT+D S – Data compression mode This comm and is used to determ ine the pos sible data com pres sion m ode between t he modem and the com press ion negotiat ion with th e rem ote m odem af ter call set- up.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 29 5.1.51 A T+FMM – Report module ID This comm and provides th e nam e of the module. Enter Response Notes: Non e Result code s: OK ERROR 5.1.52 A T+FMR – Report revision This comm and provides th e ver sion of the m odule and t he soft ware creat ion da te.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 30 03/00 5.1.55 A T+FTH – Transmit HDLC dat a with carrier Transm it data with HDLC Fram ing. +FT H=n causes t he m odem to receive da ta using HDLC prot ocol and the m odulati on defined belo w.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 31 5.1.59 A T+GMR – Request rev ision ID Enter Response Notes: Non e Result code s: OK ERROR 5.1.60 A T+ICF – Character f raming This comm and is used to determ ine the start- stop ( asynchr onous) character f ram ing that the m odem shall us e.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 32 03/00 5.1.61 A T+IFC – Local flow control This comm and is used to contro l the oper ation of loca l flo w control between the m odem and equipm ent inter facing t he m odem.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 33 5.1.64 CME ERROR<n> <n> 0 3 4 10 11 12 13 16 26 30 Phone f ailure Operation n ot al lowed Operation n ot suppor ted SIM not inserte d SIM PIN required SIM PUK req uir e d SIM failure Incorrec t pass word Dial strin g too long No net work ser vice 5.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 34 03/00 5.1.66 S Register Summary Register F unction Def ault Value S0 S1 S2 S3 S4 S5 S6 S7 S8 S10 S12 Rings to a uto ans wer Ring count er.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 35 5.2 Summary This section h as list ed all of the AT comm ands, whic h are us ed b y the m odem.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 36 03/00.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 37 6 DEBUGGING & INDICA T OR LIGHTS The m odem has a built-in indicat or, which can show R ed, Green or Yellow and f lashes at dif ferent speeds acc ording to the stat us of the modem and bat tery.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 38 03/00.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 39 7 INST A LL A TION 7.1 Introducti on This is an are a, which is of ten over looked a nd is, in fac t, ver y important. Cost and c orner cutt ing ar e frequ ently obs erved in inst allat ions and, conseq uentl y, reliabi lity suf fers and prob lem s are seen.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 40 03/00 7.5 Cabling Maxon pr ovides a variet y of ac cessor ies (see S ection 8. 4) wh ich we r ecomm end are us ed to inter face to the data m odem . The CA83 60 interf aces the power an d DTR li ne to the m odem .
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 41 7.7 Connections 7.7.1 9 pin D-ty pe (RS-232 Interface) Pin Functio n 1 DCD 2T X D 3R X D 4D T R 5G N D 6D S R 7R T S 8C T S 9R I Table 7-1 - 9 pin D-type socket connections 7.7.2 25 pin D-ty pe Pin Functio n 1G N D 2 Software u pdate sup ply 5.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 42 03/00.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 43 8 A PP ENDICES 8.1 Setting up Window s Modem inter f ace Follo w these ste p-by-ste p instr uctions to set up t he W indows Mo dem interfac e for use with TAPI interfac e softwar e (such as W inFax Pro).
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 44 03/00 8.1.3 Highlight the don’t detect my modem box 8.1.4 Select th e standard 19 200 modem.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 45 8.1.5 Select th e appropriate COM port 8.1.6 Set the l o ca tion information.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 46 03/00 8.1.7 Finish Installation 8.1.8 Select Properti es.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 47 8.1.9 Select Connect ion 8.1.10 Set Data Bit s, Parity and Stop bits Select A dvanced.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 48 03/00 8.1.11 Select Flow Control and Soft ware (XON/XOFF) Note : Some app licatio ns do not use Software F low Contr ol, ther efore s et flow c ontrol to Hardwar e. In whiche ver cas e, the har dware or t he sof tware mu st provi de flow co ntrol ot herwise data wil l be los t.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 49 8.2 Setting up Hyper Terminal Hyper T erm inal is a v ery sim ple term inal pack age which ca n be used to send s imple c omm ands to / from the modem .
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 50 03/00 8.2.2 Select Hy per Terminal Double cl ick to open H yper Ter minal. 8.2.3 Select Properti es.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 51 8.2.4 Set Port 8.2.5 Port Settings.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 52 03/00 8.2.6 Properties Set Beep, if require d. 8.2.7 A SCII settings Append line fee ds , send li ne ends and wr ap li nes , if requ ired .
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 53 8.3 Setting up Win Fax Pro The f ollowing se ction illustr ates ho w to set up W in Fax Pro. Other F ax sof tware is availa ble an d this section sh ould n ot be tak en as an e ndorsem ent of W in Fax Pro.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 54 03/00 Check Modem is Standard 1 9200, if not, go t o 10.1.4 . Select Properti es Check that the follo wing s etting ar e m ade:.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 55 8.4 A ccessories Descriptio n of Accessor y Maxon Part Number 5 metr e Power Lead CA8360 9 wa y D-type Male t o Fem ale RS-23 2 Int.
MM6854/64 Dual Band GSM Data Modem ME 820047 Issue 1.0 Page 56 03/00.
MM6854/64 Dual Band GSM Data Modem Issue 1.0 ME 820047 03/00 Page 57 9 GLOSSA R Y Abbreviat ion M eaning AT Hay es AT modem s erial comm and se t comm only used f or land l ine m odems CI Com m and Interpreter.
Ein wichtiger Punkt beim Kauf des Geräts Maxon Telecom MM-6854 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Maxon Telecom MM-6854 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Maxon Telecom MM-6854 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Maxon Telecom MM-6854 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Maxon Telecom MM-6854 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Maxon Telecom MM-6854 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Maxon Telecom MM-6854 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Maxon Telecom MM-6854. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Maxon Telecom MM-6854 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
