Benutzeranleitung / Produktwartung VP-12S1s des Produzenten Marantz
Zur Seite of 30
Model VP-12S1 User Guide DLP TM Projector R.
The lightning symbol in the triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPOR T ANT SAFETY INSTR UCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operational precautions which you should be particularly aware of.
ENGLISH FEATURES ................................................................................................................... 1 PROJECTOR LAYOUT AND FUNCTIONAL OVERVIEW ........................................... 2 Front and Top ...............
1 ENGLISH FEATURES 7 Optics • Texas Instruments Digital Light Processing Technology • High Definition Panel (1280 x 720), DMD TM HD • 16 : 9 Aspect Ratio • Newly developed custom optics by Min.
2 ENGLISH q IR sensor (front and rear) w Projection Lens e V entilation holes Notes: • Do not place anything near the ventilation holes to avoid overheat inside the unit. • Do not place your hand or objects near the ventilation holes; the air is coming out.
3 INTRODUCTION ENGLISH z COMPONENT VIDEO IN Y, P B /C B , P R /C R connectors. Connect the COMPONENT VIDEO output from video equipment or an A/V processor/receiver with a component video output. x S-VIDEO IN Connect the S-VIDEO output from a video equipment.
4 ENGLISH ⁄1 TRIG.2(TRIGGER 2) Select ON or OFF at each aspect mode, such as Full, Normal, Zoom, and Through to control screen aspect ratio with powered up/down dual aspect ratio screen. Note: Do not use TRIG.1 and TRIG.2, as the power source. ⁄2 LIGHT ON/OFF Select ON : The connector panel lights up.
5 INTRODUCTION ENGLISH Height Adjustment How to use adjustable feet and adjustment lever. (1) Release the adjustable feet. (2) Detail adjustment PRESS DOWN DOWN UP Note : Lift the unit up carefully. q q w Bottom q Adjustment lever Lift the projector and turn the adjustment lever right or left.
6 ENGLISH a PO WER ON key Turn the projector on. s ST ANDBY key Turn the projector off. d 3 / 4 / 1 / 2 keys Control the MENU cursor. f ENTER key Confirm "Reset All", "Reset Lamp Life", "New Lamp?". g MENU key Display the on-screen menu.
7 INTRODUCTION ENGLISH 1. Open the cover. 2. Insert batteries (AA). Make sure to match the + and – marks on the batteries with inside the battery compartment. 3. Close the cover. CAUTION – The available battery types are limited: manganese dry cell and alkaline dry cell.
8 ENGLISH VP-12S1 Adjust the vertical and horizontal positions of the projector. Side view Flat view INSTALLATION Recommended Setting CAUTION – For ceiling installation, consult with Marantz authorized dealer. – Do not look into the lens when the projector is turned on.
9 SET UP PROCEDURES ENGLISH VP-12S1 40 inch 60 inch 80 inch 100 inch 120 inch 150 inch 200 inch 250 inch 50 7 / 16 inch 1,281 mm 76 9 / 16 inch 1,945 mm 102 3 / 4 inch 2,609 mm 128 7 / 8 inch 3,273 mm.
10 ENGLISH You can adjust the image position with the Lens Shift knob. 7 Turn the Lens Shift knob to clockwise : The image goes up. • Maximum range to throw up : Bottom of the image correspond to the center of the Projection Lens. 7 Turn the Lens Shift knob to counterclockwise : The image goes down.
11 SET UP PROCEDURES ENGLISH When the projecting image is a trapezoid, correct it in Keystone-V and/or Keystone-H in the Display Menu. 7 Keystone-V(Electronic vertical keystone correction) Adv anced S.
12 ENGLISH • Press the ZOOM key, the NORMAL key or the FULL key on the remote controller for the 4:3 aspect ratio video source. • Press the FULL key on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems.
13 SET UP PROCEDURES ENGLISH • Press the ZOOM key, the NORMAL key or the FULL key on the remote controller for the 4:3 aspect ratio video source. • Press the FULL key on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems.
14 ENGLISH DV D VCR S-VIDEO OUT VIDEO OUT COMPONENT VIDEO OUT Computer HD Set T op Bo x / BS T uner RGB OUT RGB OUT When making connections be sure to: • Turn off all equipment before making any connections. • Use the proper cables for each connection.
15 SET UP PROCEDURES ENGLISH Receiver equipment with a Dolby Digital decoder DIGIT AL A UDIO IN D V -SD OUT DV camcoder Connection with a D V camcoder Note: DV IN connector is available for DV-SD format of i.
16 ENGLISH 1. Connect the supplied AC power cord. The STANDBY indicator lights up and the projector goes into the standby mode. 2. Press the POWER ON key on the remote controller or the POWER key on the projector.
17 OPERATIONS ENGLISH Adjust the picture to suit own preference by using the Picture Adjust feature. 7 For a video signal input, the following adjustments can be made: NOTE: The user cannot adjust Tint in Component signal (YC B C R /YP B P R ). – Contrast Use 1 / 2 key to adjust.
18 ENGLISH The following adjustments can be made: 7 OSD Position (16:9 / 4:3 / Through ) 7 Language (English/ German/ French/ Spanish/ Portuguese/ Italian) 7 Ceiling (On/Off) ON: The picture is reversed horizontally and vertically. 7 Rear (On/Off) ON: The picture is reversed horizontally.
19 OPERATIONS ENGLISH Select 12V DC or 0V from on and off at each aspect mode. Full, Normal, Zoom, and Through. On: Output DC 12V. Off: No output. This allows such as a powered dual aspect screen according to the aspect mode.
20 ENGLISH Lamp Life Display the remaining lamp life by pressing the INFO key on the remote controller. Notes: • When the Lamp Life becomes less than 100 hours , it is recommended to replace the lamp unit. A lamp may be worn out when the Lamp Life becomes less than 100 hours .
21 ADDITIONAL INFORMATION ENGLISH CAUTION: • Do not touch the lamp and the lamp unit immediately. It will be extremely hot. Allow at least one hour for the lamp to cool down before handling. • Do not loosen any screws except for those mentioned below.
22 ENGLISH No power Image is not displayed. Poor color. Picture is too dark. Picture is not clear. Picture rolls. The Remote Controller does not work. AC power cord is not connected correctly. Lamp cover is not closed correctly. A signal cable is not connected correctly.
23 ADDITIONAL INFORMATION ENGLISH 7 Optical characteristics Panel 0.85inch 16:9 1,280 x 720 pixels Digital Micromirror Device TM Lamp Super High Pressure 150W Lens f: 26.5 to 30.7 / F: 3.0 Projection size 40 to 250 inches Light output 700 ANSI LUMEN typical 7 INPUT/OUTPUT VIDEO IN RCA x 1 NTSC-3.
24 ENGLISH 7 Timing chart NTSC P AL-B/G SECAM 480/60p 576/50p 1035/60i 1080/60i 1080/50i 1080/48i 720/60p 720/50p 720/48p 540/60p 640x350 #1 640x350 #1 640x400 #1 640x400 #1 640x480 640x480 #1 640x480 #1 640x480 #1 800x600 800x600 800x600 #1 800x600 #1 800x600 #1 1024x768 1024x768 1024x768 #1 1024x768 #1 1024x768 #1 768x240 960x287.
25 ADDITIONAL INFORMATION ENGLISH (346.5 mm) 13 5/8 inch (344 mm) 13 3/8 inch (19.8 mm) 3/4 inch (110 mm) (93.5 mm) 4 5/16 inch 3 11/16 inch (124.5 mm) 4 7/8 inch (127 mm) 5 inch (421 mm) 16 9/16 inch 471 mm 18 9/16 inch (132 mm) 5 3/16 inch (404.5 mm) 15 15/16 inch (222 mm) 8 3/4 inch (182.
COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA Jamo Australia Pty.
Ein wichtiger Punkt beim Kauf des Geräts Marantz VP-12S1s (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Marantz VP-12S1s noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Marantz VP-12S1s - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Marantz VP-12S1s reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Marantz VP-12S1s erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Marantz VP-12S1s besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Marantz VP-12S1s verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Marantz VP-12S1s. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Marantz VP-12S1s gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
