Benutzeranleitung / Produktwartung 6MF des Produzenten Mamiya
Zur Seite of 35
Mamiya 0 AAF 6.
Congratulations on your purchase of the Mamiya 6 MF, Succeeding the New Mamiya 6, the Mamiya 6 MF is the latest addition to the Mamiya 6 x 6cm format series which has become the world’s standard in .
Special Features of the Mamiya 6 MF ......................... 3 Nomenclature an d Functiona l Part s ............................... 5 Preparatory Steps for Use e ............................................... 9 Mounting/Removin g Lense s ...........
Three Size Multiple Formats In addition to the attractive 6 x 6cm square format which assures multifaceted composition, the Mamiya 6 MF is also capable of using the 6 x 4.
[Retracte d - locked] The retractable lens mount greatly reduces the profile of the Mamiya 6 MF. making it more convenient to store and carry. When not in use the lens mount, retracts into the body for storage and reduces the overall size of the camera.
Exposure compensation scale - Film speed window (ISO) - Retractable lens moun t Internal bellows - Rangefinder coupling pin - Retraction/extension button Press this button to retract the lens fo r st orage .
AEL release button Film selector Exposure compensation lock release button Film holder roller Film type (120 or Pressure plate 6.
Self-timer lever ( c) Synchro-socket ( f Viewfinder eyepiece Rubber eyecup - carrying strap lug ) ) _ Film spool stud 7.
Body cap.
In order to attach the lens, first pull out the lens mount and remove the camera body cap. To do this, while pressing the retraction/ extension button (A) in, pull the lens mount out by gripping the cross bar of the lens cap.
[Mounting lens] [Removing lens] Remove the front and rear lens caps. a The front lens cap can be removed by pressing in the tabs on the right and left with your fingers and pulling the cap towards you. * The rear lens cap can be removed by rotating it counterclockwise.
[Pulling out the retractable lens mount] [Retracting ( storing) the lens 1. While pressing in the retraction button (A) on the camera body in the direction of the arrow, pull out the lens and lens mount until it clicks. 2. When both have been pulled out, take your figners off the retraction button, and make sure that both are completely pulled out.
[Battery check] 1. Power can be turned on/off with the small lever beside the shutter release button. (ON) Align the white dot on the lever with the white dot on the camera body. (OFF) Align the white dot on the lever with the red dot on the camera body.
[Closing the light shield curtain] Before opening/closing the light shield curtain, be sure to cock the shutter, otherwise, it will not open/close. To open the light shield curtain, slid e the light shield curtain release lever along lo fol- low the arro w " I+ ” down and right.
Before using the camera, it is advisable to understand how it works ~2 Power on/off lever . . . . . . . . . . . . . . Set to ON. (See page 12) T Film advance lever .._ Wind the lever to cock the shutter. f Light shield curtai n . . . . . . . . . . . Open.
[Setting the film speed] [Opening/closing the back cover] [Setting the film type] While depressing the back cover lock but- ton, simultaneously push down the lock lever in the direction of the arrow and the back will open. When closing the back cover, securely press both corners until it clicks.
[Memo clip] The memo clip on the back cover is use d to 1. hold the film box to serve as a convenient Push the spool release lever of right side reminder of the type of film in the camera or to the right, and install the take-up spool in for recording the date.
3. When the new roll ha s been inserted, be sure to reset the lower spool stud b y pres- sing it in. (Also, be sure to reset the take-up spool stud in a similar manner.) 4. Pull out the backing paper, and insert the tip into the slot on the take-up spool as pic- tured.
[Determining the shutter speed] The Mamiya 6 MF has an aperture-prior- ity, AE lens shutter. Once the aperture and film speed are set, the AE meter selects a proper shutter speed in relation to the set aperture. Under the manual photographic mode, proper shutter speed is indicated by a red LED within the viewfinder.
Viewfinder display The shutter release button is designed so that pressure can be applied i n two stages. When it is lightly touched, correct metering data is displayed on the left side of th e view finder.
AE photography AEL photography Manual mode 20.
Photographic area covered When the lens has been focused, the doubleimage superimposing rangefinder produces two superimposed images with in the square 0 of the viewfinder. 1 . Position the subject within the central square 0 of the viewfinder. As on the top left the subject will appear as a double images.
[Unloading the film] 1. Press the shutter release button when you have focused an d determined compos- ition. 2. Advance the film by winding the film advance lever until it stops.
1. Align “A” on the shutter speed dial with the white line index mark on the camera body. 2. Be sure to set the exposure compensa- tion scale to 0.
You may over-ride the A E mode an d select the aperture and shutte r speed manually. Simply set the shutter speed against the white line index mark and also set the lens aperture to the desired “f" stop. As noted previously when the shutter re- lease button is touched slightly, the proper shutter speed will be indicated by a blinking LED.
The depth-of-field varies according to the aperture. The smaller the aperture (f/8, f /11 , f/16...) the greater the depth-of-field; the larger the aperture (f/8, f/5.
The exposure compensator functions in a number of important ways. It can be used to correct exposure values (EVs) or the differ- ences in brightness between a primary sub- ject and its background -especially when over or under-exposures occur.
The Mamiya 6 MF features an X synchro flash terminal and its lens shutter system permits flash synchronization at all shutter speeds. Shoe-mounted flas h units can be attached directly to the hot-shoe, while flash brackets can be attached to the tripod socket for larger flash guns.
If the batteries have been deplete d - espe- cially when the power on-off lever has been set to the OFF position during long expo- sures (at "B" ; 4 seconds or 2 seconds ) - the winding-stop prevents the film from being wound.
-I [ Determining the Fiel d of View in the Viewfinde r ] Before taking photos, Insert the 6X4.5 Gently bend the 6x4.5 frame [with the frame under the film guide rails. making ivlarmya name visible as pictured ( A ) ] sure to open the light shield curtain first.
Lens construction: 8 elements in 5 groups Lens construction 6 elements in Angle of view : 75° Minimum aperture : 22 Angle of view: 55° 35mm equivalent: 28mm Minimum aperture: 22 Minimum focusing distance: 1m 35mm equivalent: 41mm MInimum magnification: 0.
[Lens hood] For 50m m f/4: Bayonet type (58mm in diameter) For 75mm f/3.5: Bayonet type (58mm in diameter) For 150mm f/4.5 Screw-in type (67mm in diameter) All are supplied wit h the lenses. [Diopter correcting lens] Focusing accuracy diminishes when the eye diopter is incorrect.
[ Panoramic Adapter Se t ] When using the Panoramic Adapter, a wide panoramic photography can be taken by using 35mm film. The 135 panoramic Adapter Set is com- posed of the following: 1. 135 Panoramic Frame 2. Winding Spool Camera Type : Film Type Actual Negative Siz e : 3.
Uniquely designed to prevent mistakes, the New Mamiya 6 incorporates numerous safety features. If the shutter will not function, it is very likely due to user error rather than camera malfunction. Should something appear to go wrong, be sure to review the following points.
0 If the camera is not to be used for a long time, remove the batteries and film. l Do not store the camera at temperatures exceedin g 40°C or below - 10°C. Also avoid storing in a damp or sea air environ- ment. When stored in the vicinity of gaseous chemicals, such as naphthaline and formalin, the camera and film may be adversely affected.
Ein wichtiger Punkt beim Kauf des Geräts Mamiya 6MF (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mamiya 6MF noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mamiya 6MF - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mamiya 6MF reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mamiya 6MF erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mamiya 6MF besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mamiya 6MF verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mamiya 6MF. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mamiya 6MF gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
