Benutzeranleitung / Produktwartung VPA115PR des Produzenten Magnavox
Zur Seite of 24
Owner’s Manual Important! Return your Warranty Registration Card within 10 days. See why inside. Video Cassette Player VPA115BL VPA115PR.
Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Introduction 3 Features • AC/DC Power System • Automatic Head Cleaner • Automatic Operation Features • Automatic Tracking Adjustment • Dew Sensor • Display Panel • Picture Control • Re.
4 Table of Contents Setting Up Your VCP Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Using Your VCP 5 Putting Batteries in the Remote Control 1 Remove the battery compartment lid on the bottom of the remote control by sliding the lid in the direction of the arrow. 2 Insert two AA batteries inside the battery compartment with their + and – ends aligned as indicated.
6 Hookups Without a Cable Box The basic VCP/TV connection – antenna/cable to VCP to TV – is shown below. If you have a Cable Box, please refer to pages eight-nine. If you have a Stereo TV, please go to page 10. To use the VCP in an automobile, go to page 11.
Hookups Without a Cable Box (cont’d) 7 ANT OUT ANT IN AUDIO CH3 CH4 VIDEO OUTPUT 13.2V ANT OUT ANT IN CH3 CH4 CH 4 or CH 3 CH3 / CH4 Switch CH3 CH4 ANT OUT ANT IN AUDIO CH3 CH4 VIDEO OUTPUT 13.
8 Hookups With a Cable Box This connection allows you to view any channel. You must select channels at the Cable Box. ANT OUT ANT IN AUDIO CH3 CH4 VIDEO OUTPUT 13.2V OUT IN 75 Ω ANT / CABLE ANTENNA IN Jack Back of TV (example only) 1. Connect the Cable signal to the IN Jack on the Cable Box.
Hookups With a Cable Box (cont’d) 9 ANT OUT ANT IN AUDIO CH3 CH4 VIDEO OUTPUT 13.2V IN OUT 75 Ω ANT / CABLE This connection differs from the one shown on page eight. You may still view any channel (selecting channels at the Cable Box), but the instructions for playing a tape are different.
10 Hookups With a Stereo TV ANT OUT ANT IN AUDIO CH3 CH4 VIDEO OUTPUT 13.2V antenna or cable to ANT(enna) IN Jack Video Cable Audio Cable VIDEO (yellow) and AUDIO (white) OUTPUT Jacks Audio and Video IN Jacks on TV ● Audio and Video cables are not supplied.
Mobile Connections 11 When passengers in your vehicle want to watch a video program, hook up the VCP by following the steps below. 1 Make sure your vehicle has a 13.2-volt, negative ground electrical system. Unplug the AC power cords of the VCP and the TV.
POWER EJECT REW/SEARCH PLAY FF/SEARCH STOP STILL TRACKING 12 Remote Control Buttons STOP Button Press to stop tape playback or forward or reverse searching. Pressing the STOP button also returns tracking to auto tracking. Details are on page 19. POWER Button Press to turn the VCP on or off.
Display Panel 13 POWER POWER STOP EJECT POWER SYSTEM REPEAT REPEAT PICT. CONTROL PICT. CONTROL VIDEO CASSETTE PLAYER F.FWD PLAY REW POWER REPEA T PICT . CONTROL Cassette Compartment Insert a tape here. VCP Display Panel Information about VCP operations is displayed here.
14 Front Panel POWER Button Press to turn the power on and off. PLAY Button Press to play a tape. Also, press to release Search mode or Still mode and return to normal playback. Details are on page 18. REW(ind) Button When tape playback is stopped, press to rewind the tape at high speed.
Rear Panel 15 ANT OUT ANT IN AUDIO CH3 CH4 VIDEO OUTPUT 13.2V ANT(enna) IN Jack Connect your antenna or cable here. Details are on pages six-10. CH3/CH4 Switch Set to channel 3 or 4 to use your TV with your VCP.
Before playing a tape, make sure the VCP and TV are connected (see pages six-11). Then, follow the steps below. 1 Turn on the TV. Set it to the same channel as the CH3/CH4 switch on the back of the VCP. 2 Insert a tape in the VCP . The power will come on and play- back will start automatically.
Playback Options 17 PICT(ure) CONTROL Button REPEAT Button REPEAT Light PICT(ure) CONTROL Light POWER POWER STOP EJECT POWER SYSTEM REPEAT REPEAT PICT . CONTROL PICT. CONTROL VIDEO CASSETTE PLAYER F.FWD PLAY REW Repeat Playback 1 During tape playback, press the REPEAT button on the VCP.
Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the FF/SEARCH button or the REW(ind)/SEARCH button. A fast forward or reverse picture search will begin. (Noise bars will appear.) 2 To stop searching, press the STOP button.
Automatic Operation Features 19 Direct Button Operation When a tape is in the VCP and the VCP power is off, press the PLAY, REW(ind), or F.FWD button on the VCP . The VCP will turn on automatically and playback, rewinding, or fast forwarding will start immediately.
20 Helpful Hints The VCP has no power. ● Make sure the AC power cord is connected completely to an AC (alternating current) outlet. If you are using AC power, make sure the car battery cord is disconnected completely. ● Make sure the car battery cord is connected completely to the vehicle’s cigarette lighter socket and to the 13.
RENEWED 90 DAY LIMITED WARRANTY.
22 Specifications/Glossary Antenna: VHF (very high frequency; channels 2 - 13) and UHF (ultra high frequency; channels 14 - 69). AUDIO OUTPUT Jack: jack located on the back of the VCP which is used to send audio to another system. Cable: all standard channels can be received without a Cable Box.
Index 23 ac power cord . . . . . . . . . . . . . . . . . . . . . . . . . .15 accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 ant(enna) in jack . . . . . . . . . . . . . . . . . . . . . . . . .15 ant(enna) out jack . . . . . . .
IB8168E001 Printed In China 0VMN02381 / H35A1UD,H35A2UD* * * * * S UPPLIED A CCESSORIES O PTIONAL A CCESSORIES The following items are supplied with your VCP; they are provided to help you use or set up your VCP. The following additional items are not provided with your VCP, but they are designed for use with your new VCP.
Ein wichtiger Punkt beim Kauf des Geräts Magnavox VPA115PR (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Magnavox VPA115PR noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Magnavox VPA115PR - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Magnavox VPA115PR reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Magnavox VPA115PR erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Magnavox VPA115PR besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Magnavox VPA115PR verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Magnavox VPA115PR. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Magnavox VPA115PR gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
