Benutzeranleitung / Produktwartung MC194DMG des Produzenten Magnavox
Zur Seite of 48
MC194DMG C OLOR TV WITH BUIL T -IN VCR O WNER ’ S M ANUAL R EAD THIS MANUAL FIRST ! C ONGRA TULA TIONS ON PURCHASING THIS PRODUCT .W E ’ VE INCLUDED EVER YTHING Y OU NEED TO GET ST AR TED .
Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of own- ing a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Introduction 3 Features • Automatic Channel Setup • Automatic Head Cleaner • Automatic Tracking Adjustment • Closed Caption • Daylight-Savings Time • English or Spanish displays • High Q.
4 Table of Contents Setting Up Your TV/VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Using the TV/VCR 5 Using the Remote Control ● Point the remote control at the TV/VCR ’ s remote sensor. ● Do not put objects between the remote control and the TV/VCR.
6 Hooking Up the TV/VCR ANT. ANT. ANT. IN OUT ANT. Connect an RF coaxial cable (75- ohm, not supplied) to the OUT Jack on the Cable Box and to the ANT(enna) Jack on the TV/VCR. Connect a Cable signal or an antenna to the ANT(enna) Jack. 1 Hook up your TV/VCR using one of the connections shown.
Hooking Up the TV/VCR (cont’d) 7 STOP/EJECT REW PLAY F.FWD REC/OTR POWER VOLUME CHANNEL VIDEO AUDIO EARPHONE OUT IN VIDEO IN OUT 3CH 4CH AUDIO ANT. OUT IN VIDEO IN OUT 3CH 4CH AUDIO ANT. VIDEO AUDIO • Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent.
8 Setting TV Channels for the First Time The TV/VCR can memorize the channels you receive in your area. If you are using a Cable Box or Satellite Box, you do not need to set channels at the TV/VCR. Set the TV/VCR to the output channel of the Cable Box or Satellite Box (chan- nel 03 or 04).
– M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER ’ S SET UP V-CHIP SET UP B LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 2 Press F.FWD/ B or REW/ s to select ENG- LISH or ESPA Ñ OL (Spanish).
• The TV/VCR cannot control or change the channels of the Cable Box or Satellite Box. Helpful Hint 10 Resetting TV Channels Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below.
Adding/Deleting Channels 11 The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add deleted channels into the memory again.) 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select CHANNEL SET UP. Then, press F.
12 Setting the Clock 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select SETTING CLOCK, then press F.FWD/ B . – M E N U – TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER ’ S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 2 With AUTO CLOCK selected, press F.
Setting the Clock (cont’d) 13 3 Press PLAY/ ▲ or STOP/ ▼ to select AUTO CLOCK CH. Then press F.FWD/ B or REW/ s until the channel number of your local PBS station appears. If you do not know the PBS channel number, leave it set to [AUTO], which is located before [2].
14 Setting the Clock (cont’d) • If you unplug the AC power cord or if the power fails for more than three seconds, you may have to reset the clock. • If there is no PBS station in your area or on your cable system, select AUTO CLOCK and press F.
Setting the Clock (cont’d) 15 5 Press PLAY/ ▲ or STOP/ ▼ until your desired year appears. (Example: 2002) Then, press F.FWD/ B . – MANUAL CLOCK SET – MONTH DAY YEAR 0 5 / 0 7 TUE 2 0 0 2 HOUR MINUTE – – : – – – – 6 Press PLAY/ ▲ or STOP/ ▼ until your desired hour appears.
16 Daylight-Savings Time When Daylight-Savings Time (D.S.T.) is ON, the TV/VCR clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. To turn Daylight-Savings Time ON or OFF, follow the steps below.
TIME SEARCH MUTE RECORD SPEED RESET 0 8 9 7 5 6 4 2 3 1 PAUSE/STILL + 100 STOP F.FWD PLAY REW VOL. DISPLAY MENU POWER SLEEP/WAKE UP CH. ALT.CH SLOW F.FWD/ B (Fast Forward) Button When tape playback is stopped, press to fast forward the tape at high speed.
18 Front Panel STOP/EJECT REW PLAY F.FWD REC/OTR POWER VOLUME CHANNEL VIDEO AUDIO EARPHONE Cassette Compartment Insert a video cassette tape here. POWER Button Press to turn the TV/VCR on or off. Turn off the TV/VCR to activate a timer recording. VOLUME o / p Buttons Press to adjust the sound level.
Rear Panel 19 ANT . ANT(enna) Jack Connect your antenna or cable here. Details are on page six. Antenna Hole Connect the stem of an indoor antenna here. Details are on page six. AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR.
To check the Counter, Clock, and Channel number on the TV screen, press DISPLAY on the remote control. Each time you press DISPLAY, the TV screen will change as described below. When Closed Captions are OFF (details are on page 35) ● Counter mode: After five seconds, only the counter remains.
decreased brightness BRIGHT increased brightness REW/ s F.FWD/ B decreased contrast CONTRAST increased contrast paler COLOR more brilliant more purple TINT more green softer SHARPNESS more clear Adjusting the Picture Controls 21 Follow these steps to adjust the TV/VCR ’ s brightness, pic- ture, color, tint, and sharpness.
22 Playing • If the tape you want to play is already in the TV/VCR, turn on the TV/VCR power, then press PLAY/ ▲ . • Playback features and options are on pages 23 and 31-34. • When you play an S-VHS format tape, you cannot get the high resolution that would be avail- able on an S-VHS VCR.
Playback Options 23 • Still and Slow mode will switch to Stop mode after five minutes to protect the TV/VCR and the tape from damage. • SP/LP/SLP means this feature will work with tapes recorded in Standard Play, Long Play, or Super Long Play. For tape speed details, see page 24.
24 Recording • You cannot record one channel while watching another. • Recording options are on pages 25-30. • If you pause a recording for more than five minutes, the TV/VCR will resume recording automatically to protect the video cassette tape from damage.
One-Touch Recording 25 A One-Touch Recording (OTR) is an immediate timed recording from 30 minutes to eight hours long. ● This function cannot be done from the remote control. ● Recording starts immediately when you press REC/OTR. Before you begin, make sure .
4 For a one-time recording, press PLAY/ ▲ until the desired date appears. Or , t o record a TV program at the same time on the same channel every day, press STOP/ ▼ until EVRY DAY appears.
Timer Recording (cont’d) 27 6 Press PLAY/ ▲ or STOP/ ▼ until the desired beginning minute appears. (Example: 7:30 PM) Then, press F.FWD/ B . 5 Press PLAY/ ▲ or STOP/ ▼ until the desired beginning hour appears. (Example: 7:12 PM) Then, press F.
28 Timer Recording (cont’d) Extending a Timer Recording To make a Timer Recording start and end later than originally sched- uled, follow these steps. 1 Press POWER to turn on the TV/VCR. 2 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select TIMER PRO- GRAMMING.
Timer Recording Auto Return 29 With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically. 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select USER ’ S SET UP. Then, press F.FWD/ B .
30 Rerecording (Tape Duplication) • Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. • Different brands of equipment may operate differently.
Repeat Play 31 • Once you set Repeat Play, it stays in effect even after you turn off the TV/VCR. • If RENTAL is set to [ON], the RENTAL PLAY B display has pri- ority. Details are on page 32. • The TV/VCR will retain the Repeat Play setting even if the power fails.
32 Rental Playback This function enables you to improve picture quality when playing worn cassettes such as rented tapes. 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select USER ’ S SET UP.
Zero Return 33 Follow the steps below to reset the counter to zero at a tape location you want to refer to later. 1 Play, rewind, or fast forward the tape to the location you would like to refer to later. Stop the tape. 2 Press RESET to set the counter to 0:00:00.
34 Time Search, Index Search Time Search You can quickly advance the tape to a position simply by entering the amount of playback time you want to skip. 1 With a tape in the TV/VCR, press TIME SEARCH. 2 Press PLAY/ ▲ or STOP/ ▼ until your desired time appears (for example, 2:50 for 2 hours 50 minutes).
Closed Caption 35 Follow the steps below to select closed captions for TV pro- gramming. Not all TV programs and commercials have closed captions or all types of closed captions (second language, half-screen text, etc.). If closed captioning is not broadcast, you cannot receive it.
36 Setting V-Chip V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited m.
Setting V-Chip (cont’d) 37 If you select TV-Y7, TV-PG, TV-14, or TV-MA, then press F.FWD/ B to select [BLOCK], the selected cat- egory ’ s sub-ratings will appear. This indicates each sub-rating may be individually set to [BLOCK] or [VIEW]. To set the sub-ratings individually: ● When you select [TV-Y7]: Press F.
38 Setting V-Chip (cont’d) MPAA Rating Settings 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select V-CHIP SET UP. Then, press F.FWD/ B . – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING C.
Sleep Timer 39 Use the Sleep Timer to program the TV/VCR to shut off in a certain amount of time. 1 Press SLEEP/WAKE UP until SLEEP TIMER appears. 2 Press PLAY/ ▲ , STOP/ ▼ , F.FWD/ B , or REW/ s until your desired sleep time appears. Each button press will increase the time by 30 min- utes up to 120 minutes.
40 Wake Up Timer The Wake Up Timer turns on the TV/VCR automatically at a specified time within the next 24 hours. You may set the TV/VCR to turn on at a TV channel or with VCR playback. To set the Wake Up Timer, follow the steps below. Before you begin: ● Set the clock.
Automatic Operation Features 41 The following playback features will always operate. Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically.
42 Helpful Hints Location For safe operation and satisfactory performance of your TV/VCR, remember the following: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation.
Helpful Hints (cont’d) 43 The remote control is not available, or the remote control will not access the menu. • Use the buttons on the front of the TV/VCR to access the menu. You cannot enter numbers (for example, to program a timer recording) using the front panel buttons.
AUDIO In Jack: jack on the front of the TV/VCR which is used to record audio from another source. Automatic Channel Setup: process in which the TV/VCR memorizes all available channels. Then, when you push the CH(annel) ▲ / ▼ button, you only scan through channels you receive.
General CRT: 19-inch in line gun Television system: NTSC Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: four heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.35 mm/sec. LP: 16.67 mm/sec. SLP: 11.
46 Limited Warranty WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product.
accessories . . . . . . . . . . . . . . .48 alt.ch button . . . . . . . . . . . . . .17 ant(enna) jack . . . . . . . . . . .6, 19 audio in jack . . . . . . . . .7, 18, 30 auto return . . . . . . . . . . . . . . .29 automatic playback . . . . . . . . .
IB8375E001 Printed In Malaysia 0EMN02009 / T7319UV * * * * * S UPPLIED A CCESSORIES The following items are supplied with your TV/VCR; they are provided to help you use or set up your TV/VCR. As an E NERGY S TAR ® Partner, Magnavox has determined that this product meets the E NERGY S TAR ® guidelines for energy efficiency.
Ein wichtiger Punkt beim Kauf des Geräts Magnavox MC194DMG (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Magnavox MC194DMG noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Magnavox MC194DMG - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Magnavox MC194DMG reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Magnavox MC194DMG erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Magnavox MC194DMG besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Magnavox MC194DMG verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Magnavox MC194DMG. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Magnavox MC194DMG gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
