Benutzeranleitung / Produktwartung F7 des Produzenten Magnavox
Zur Seite of 48
Owner’s Manual MBP5120F/F7 Blu-ray Disc / DVD Player © 2010 F unai Electric Co., Ltd . E5S02_03UD_MBP5120F_F7_OM_EN.indd 1 E5S02_03UD_MBP5120F_F7_OM_EN.
2 INTRODUCTION Safety Instructions The model and serial numbers of this unit may be found on the cabinet. Model No.: Y ou should record and r etain those numbers for future refere nce. Serial No.: W ARNING: TO REDUCE THE RISK OF FIRE OR ELEC TRIC SHOCK, DO NOT EXPOSE THIS APP ARA TUS T O RAIN OR MOISTURE.
3 RADIO- T V INTERFERENCE This equipment has been tested and f ound to comply with the limits for a Class B digital devic e, pursuant to P art 15 of the FCC Rules. These limits are designed to pr ovide reasonable prot ection against harmful interference in a residential installation.
4 Note about Recycling • This unit’ s pack aging materials are r ecyclable and can be reused. Please dispose of any materials in acc ordance with your local recycling regulations . • Batteries should never be thro wn away or incinerated but disposed of in accordance with y our local regulations concerning chemical wastes .
5 C ONTENTS INTRODUC TION................................................................ 2 Safety Instructions ................................................................... 2 Supplied Accessories ................................................
6 T rademark Information HDMI, the HDMI Logo , and High-Definition Multimedia Interface are trademarks or register ed trademarks of HDMI Licensing LL C in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
7 1. AC po wer c ord 2. LAN terminal 3. HDMI OUT jack 4. A UDIO OUT jacks 5. DIGIT AL OUT (C OAXIAL) jack 6. W ireless LAN (Internal) 7. VIDEO OUT jack Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge ma y cause permanent damage to the unit.
8 Remote Con trol (*) The unit can also be turned on by pr essing these buttons. 1. ST ANDB Y/ON y button • Pr ess to turn on the unit, or to turn the unit into the standby mode. (T o completely turn off the unit, you must unplug the AC po wer cord.
9 24. MODE button • During BD or DVD playback, press to displa y the setting for the rapid playback and the picture adjustment. • During BD , DVD and CD playback, press to display the setting for the virtual surround.
10 C ONNECTIONS Connection to the TV HDMI Video / A udio Connection (Suppor ts up to 1080i / 1080p , 1080p24 resolution.) L R AUDIO OUT VIDEO OUT HDMIOUT LAN Wireless LAN COAXIAL HDMI IN HDMI cable(not supplied) Y our T V HDMIOUT • No analog audio connection required.
11 Connection to an Audio S ystem • When you change the connections, all devices should be turned off . • Refer to the manual acc ompanying external devices for mor e information. 2-Channel Analog Audio C onnection Digital Audio C onnection T o set up “Digital Out” , refer to page 29.
12 Connection to the Network By connecting this unit to the Internet, you can access VUDU ser vices and applications, BD-Live features on a Blu-ray Disc and perform network update. - F or more information about software update , refer to “Network Update” on page 41.
13 Finding the Video Channel on Y our TV After you hav e completed all the connections, you must find the c orrect video channel (external input channel) on your T V . 1 After you hav e made all the necessary connections, press [ST ANDB Y/ON y ] to turn on the unit.
14 PLA YBA CK Information on Pla yback Before y ou start playing back a disc, read the following inf ormation. Playable Discs and F iles Playable discs Blu-ray Disc - BD-video (single / dual layer) - BD-RE ver . 2.1 (single / dual layer) (Recorded in BDMV f ormat) - BD-R ver .
15 Region Codes This unit has been designed to play back BD-video with region “ A” and DVD-video with region “1” or “ ALL ” . Y ou cannot play back BD-video or DVD - video that are labeled for other r egions. L ook for the symbols on your BD-video or DVD-video.
16 Reading the SD Memor y Card Y ou can play back the JPEG files in an SD Memory Card. With the SD Memory Card, you can also enjo y the following functions. - Special additional contents for BD-ROM Pr ofile 1 ver .1.1. (For mor e information about the special additional contents, r efer to the instruction book that came with the disc.
17 - [ C (stop)] is pressed while in the Resume-On- Stop mode. - the parental level is changed . - the disc tray is opened. • In the “SD Card” mode, the resume information will be cleared when; - [ C (stop)] is pressed while in the Resume-On- Stop mode.
18 3. Press [ C (stop)] to stop pla yback. It is recommended that files to be pla yed back in this unit are recor ded under the following specifications: <JPEG> • Upper limit : 2,560 x 1,900 d.
19 F ast F orward / F ast Reverse 1. During playback, press [ D (forward)] repeatedly f or fast forward. During playback, press [ E (re verse)] repeatedly f or fast reverse . Every time you pr ess [ D (forward)] or [ E (rev erse)], the playback speed will change.
20 2 audio CD: “CD-DA ” will be displayed. JPEG: Current Disc , SD Memor y Card, or f older name will be displayed . 3 T rack / F older / File list: T rack / F older / F ile list in the original o.
21 • T o repeat the current track / file in the random selection, press [REPEA T ] r epeatedly until “ Tr ack ” appears during playback . T o repeat the entire random selection press [REPEA T ] repeatedly until “ All” appears during playback.
22 PIP (BONUSVIEW ) Setting Some BD-videos have the PIP function which enables you to display the sec ondar y video in the primary video. Y ou can call up the secondary video by pressing [MODE] whenever the sc ene contains the secondary video. 1. During playback, press [MODE] repeat edly until the PIP function appears.
23 Search Using [ H / G (skip)] 1. During playback, press [ G (skip)] to mov e to the next track / title / chapter / file. P ress it repeatedly to skip to subsequent tracks . Press [ H (skip)] once to go back to the beginning of the current track.
24 Note • Some discs will only allow you to change the subtitles from the disc menu or pop-up menu. Press [TOP MENU] or [POP MENU / MENU] to display the disc menu or pop-up menu. • If 4- digit-language code appears in the subtitle menu, ref er to “Language Code List” on page 45.
25 3 Press [RETURN] to e xit. • Y ou can also set “BD Audio Mode” from the setup menu. Refer to page 28. Note • In “Mix Audio Output” mode, if there is no secondary and interactive audio, the audio will be output as “HD Audio Output” mode.
26 Renting or Purchasing VUDU Movies / T V Episodes After activating this unit, you are ready to purchase or rent movies / T V episodes and watch directly on your TV . 1. Press [RED] while opening scr een is displayed . • F or opening screen, ref er to page 9.
27 A) I f “ B ” does not appear on the right side of the setting items when you select the items: Press [ OK] repeatedly to change options. B) If “ B ” appears on the right side of the setting items when you select the items: 1) Press [ OK]. 2) Use [ K / L ] to select options, then press [OK ].
28 *1) An individual picture on the T V screen is called “Frame ” , which consists of two separate images called “F ield” . Some pic tures may be blurr ed at the auto setting in “Still M ode” setting due to their data characteristics.
29 HDMI Audio Out Setting When using HDMI connections make “HDMI Audio Out” setting in “ Audio ” menu according to the specifications of the device to be connected. Ref er to page 28. Normally , set it to “HDMI Multi(Normal)” so that the unit automatically picks and outputs the best audio format suited t o your connected device.
30 Speaker Setting (A vailable when y ou have HDMI cable c onnected to HDMI OUT jack) This unit allows y ou to enjoy multi-channel surround sound such as 7.1-channel / 5.1- channel surround. T o make the most of its feature , set up your speakers appropriately b y referring to the f ollowing table.
31 Menu Setting items Descriptions Channel Lev el T ests or sets the volume for each speaker . T est T one: “ T est T one” is the test tone which can be output from the speakers so you can adjust the volume f or each speaker . Select “Off ” to deactivate “ T est T one” .
32 Par ental Ratings control allows y ou to set a limit, which prevents y our children from viewing inappropriat e materials. Playback will be st opped if the ratings exceed the levels y ou set, and it will require y ou to enter a password bef ore playing back the disc.
33 Others Others Angle Icon On fun-Link (HDMI CEC) O Mode Select Disc Network Connection Software Update • T o select the setting items and options, refer t o “ Custom ” on page 27. • “ Quick ” menu consists of the setting menus frequently used, and they are accompanied with .
34 Setting items Options/Descriptions Network Connection • Refer to page 36 for more information. Connection T est Perform a network connection test. After you change IP address or DNS setting, always perform this test. Network Selection Wired* Easy* If you select “Easy ” , connection test will automatically start.
35 Setting items Options/Descriptions Software Update Allows you to update this unit’ s firmware . Refer to page 41. Current V ersion Indicates the current firmware v ersion. Disc Update Allows you to update this unit’ s software using a disc. No* Ye s Network Update Y ou can update the software version by connecting this unit to the Internet.
36 Network C onnection [SETUP] B B “Others“ B “Network Connection” Set up network connection settings in order to use BD-Live, VUDU or network update function. Connection T est After you enable a network connection or change the network settings, always perform the connection test to check if the connection is correctly made.
37 1. Follow steps 1 to 2 in “Easy ( Wired)” on page 36. 2. Use [ K / L ] to select “ Custom ” , then press [OK]. - Setting menu of “C ustom ”(wired) will be displayed . 3. Use [ K / L ] to highlight the item you w ant to set. • ”M AC Addr ess” is for viewing only and cannot be selected.
38 a) Use [ K / L ] to select “Pr oxy Address ” , then press [OK]. Pro xy address setting screen will appear . Enter pro xy address. • The keyboard scr een will appear . Others _ Proxy Address abc de f gh i j 1 234 56 78 90 uv wxy z . - _ OK kl m n o p q rst Clear All Clear a/A/@ OK [ K / L / s / B ] : Move the highlight.
39 <Wir eless Router> In order to use a wireless network, you must set up the connection to the wireless router . Find wireless netw ork Search for wireless netw orks automatically and select the wireless network name (SSID) from the list. 1. In “Network Connection ” menu, use [ K / L ] to select “Network Selection” , then press [OK].
40 Manually enter your SSID Set up the connection to the wireless router manually by entering the wireless network name (SSID). 1. Follow steps 1 to 3 in “Find wireless network” on page 39. 2. Use [ K / L ] to select “Manually enter your SSID” , then press [OK].
41 Soft ware Update [SETUP] B B “Other “ B “Soft ware Update ” This unit lets you update the software yourself using a software update disc. T o update the software, you must first download the latest version software to a disc, then ex ecute “Software Update” .
42 Initialize Menus to reset play er settings, format SD card , clear erased BD-ROM data or network settings, and deactivate VUDU. 1. In stop mode, press [SETUP]. 2. Use [ K / L ] to select , then press [OK]. 3. Use [ K / L ] to select a desired option, then press [ OK].
43 O THERS T roubleshooting If the unit does not per form properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem Solution No power . - Check if the AC cor d is properly connected. - Unplug the AC cor d once, and wait for 5-10 sec onds and then plug it in again.
44 Problem Solution The unit cannot read BD / DVD/ CD . - Condensation? (Let sit 1 or 2 hours) - Check if the disc is compatible with this unit.(Refer to page 14 .) - Wipe the dirt off the disc or replace the disc. Angle does not switch. - The angle cannot be switched f or BD / DVD which do not contain multiple angles.
45 Language Code List Language Code Language C ode Language Code Language Code A-B French [FRE] 5264 Macedonian 5957 Siswat 6565 Abkhazian 4748 Frisian 5271 Malagasy 5953 Slovak [SL O] 6557 Afar 4747 .
46 Specifications General Signal system NTSC color Po wer requirements 120 V A C, 60 Hz Po wer consumption 16 W (standby: 0.5 W ) Dimensions (width x height x depth) 14.
47 MEMO E5S02_03UD_MBP5120F_F7_OM_EN.indd 47 E5S02_03UD_MBP5120F_F7_OM_EN.indd 47 2010/08/25 10:49:45 2010/08/25 10:49:45.
LIMITED W ARR ANTY FUNAI CORP . will repair this product, free of charge in the USA in the ev ent of defect in materials or workmanship as follows: DURA TION: P ARTS: FUNAI CORP . will provide parts to replace defective parts without charge for one (1) year fr om the date of original retail pur chase.
Ein wichtiger Punkt beim Kauf des Geräts Magnavox F7 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Magnavox F7 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Magnavox F7 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Magnavox F7 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Magnavox F7 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Magnavox F7 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Magnavox F7 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Magnavox F7. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Magnavox F7 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
