Benutzeranleitung / Produktwartung RoadMate 2035 des Produzenten Magellan
Zur Seite of 75
471 El Camino Re al, Santa Clara, CA 95050 Magellan ® RoadMate ® 2035 GPS Receiver User Manual.
i IMPORT ANT SAFETY W ARNINGS The Magellan RoadMate r eceiver is a vehicle-navigation aid de signed to assist you in arriving at your selected destinations.
ii Federal Communication Commiss ion Interfe rence St atement This equipm ent has bee n tested and found to co mply with the lim its for class B digital device s, in accord ance with part 15 of the FCC Rules. These limit s are design ed to provide reasonable protection against harmful interference in a r esidentia l insta llation.
iii 2. This device must acce pt any inter ference, includ ing interference th at may ca use undesired operation of th e device. IMPORT ANT NOTE: IC Radiation Exposure St atement: This equipment complies with IC radiation exposure lim it s esta blished for an uncontrolled envir onment.
iv.
471 El Camino Re al, Santa Clara, CA 95050 T abl e of Contents Magellan RoadMate Re ceiver .............................................................................................. 1 Magellan RoadMate .......... .................... ............ .
471 El Camino Re al, Santa Clara, CA 95050 Creating a Destination to an In tersection ... ................ ............. ................ ................. ............ ........ .. 15 Creating a Destination to a City Center ...................... ....
471 El Camino Re al, Santa Clara, CA 95050 Avoiding a Traffic Incidents ...................... ................ .................... ................... ................ ..... ........... 27 Coupons and Offers ...... ................ ............. ...
1 Magellan RoadMate Receiver The Magellan ® RoadMate ® receiver is a vehicle navigation product th at utilizes GPS signals from satellites to calculate you r precise lo cation and c ompute navig ational information that can be used to guide you to your destination.
2 Magellan RoadMate (A) Power Switch (B) Power input from vehicle power adapt er cable or optional AC power adapter . A B.
3 Fundament als Powering on the Magellan RoadMate receiver The Power On/Of f switch is located on the top of the Magellan RoadMate receiver . T urning the Magellan Ro adMate receiver On 1. Slide the power switch to the lef t. 2. After the initial splash screen the W arnings screen is displayed.
4 3. T ap Sound . 4. T ap the check box for Button Sounds . Check to have button sound s played, unchecked to tu rn them off. 5. T ap to save and exit. Brightness Accessing the Brightness Control 1. Access the Main Menu . 2. T ap the Settings icon . 3.
5 Keyp ad Understa nding the keypad while enteri ng an address is an import ant part of using your Magellan RoadMate receiver . The keypad is the most common method fo r ente ring data into the Magellan RoadMate re ceiver .
6 Selecting From List When a list o f items found in the database are displaye d, use the ar rows on the right to mo ve the list up and down and tap on the desired item in the list to continue. Selecting QWERTY or ABC Keyboard 1. Access the Main Menu .
7 QuickSpell Another feature th e Magellan RoadMate receiver uses to make entering cities and stree ts easier is a featur e known as QuickS pell. In the exampl e to the right, “CE” has been entered for a street name in Chicago, IL. The Magella n RoadMate receiver has predicted that the street name may be Cedar Ave.
8 Installation Ins tructions Installation of the Magellan RoadMate receiver is simple and easy . The har dest part will be picking the best location. Selecting the Location A few tips on selectin g the proper location. • Mount the Magellan RoadMate receiver in a place where it can be easily seen and will not interfere with your view of the road.
9 Att aching the Magellan RoadMate receiver to the Car Cradle Slide the Magellan RoadM ate receiver on th e car cra dle so that the slot on the Magellan RoadMate receiver aligns with the tab on th e car cradle. Slide the Magellan RoadMate receiver all the way down until it rests o n the 'feet'.
10 Map Screen The most commonly us ed screen is the Map screen. Whe ther you are following a r oute or just traveling a round a city , the chances are that the Map screen will be displayed. The Map screen can be disp layed in two unique modes: normal and routing .
11 (F) Zoom in and zoom out controls to change the map scale. (G) Access Main Menu. (H) Access the list of nearest Highway Exit POIs (avail able only when driving on a highway/freeway/interstate). (I) Access volume controls. (J) Access OneT ouch menu.
12 Current Location Screen The Curr ent Location screen displa ys the ap proximate address of your current position, the next and previous intersections, your latitude, longitude, heading and ele vation. Accessing the Current Loca tion Screen There are two ways to open the Curr ent Location screen.
13 Changing the V olume from the Map Screen 1. T ap the speaker icon . Additional controls appea r . 2. T a p on the Mute button to mute the volume, or tap the '+' or '-' icons to change th e volume levels.
14 Cr eating a Des tination Cr eating a Destina tion to an Addr ess When creating an address, the fi rs t step is to enter the city . The city can be specified by enteri ng the name of the ci ty , entering the ZIP code for the city or by selecting a previously used city .
15 Cr eating a Destination to an Inter section When the street number is not known, an intersecting street can p inpoint the location. 1. From the Main Menu , tap the In tersection icon. 2. Enter City: Y ou have three ways to do this: • T o select the city from the list of pre vious cities, tap the button.
16 Previous Destinations Routing to a Previous Dest ination 1. From the Main Menu , tap the Previous icon. 2. Select the destination from t he list of previous destinations. 3. A screen appears with the address of the selected location, the estimated time of arri val (ET A), the dist ance to travel, and the routing method (e.
17 Creating a New Entry in Y our Address Book by Entering an Address 1. From the Main Menu , tap th e Address icon, and enter an address as describ ed in “Entering an Address”. 2. When the scr een appears with the a ddress of the se lected loca tion, the e stimated time of ar rival ( ET A), the dist ance to travel, and the routing method (e.
18 OneT ouch Menu In addition to Home Address, ther e are othe r icons in the OneT ouch Menu. There are predefi ned bookmarks as well as user assignable bookmark s for searches and favori te destinations. Th ey can be used for easy access of frequent destinations and to get loca l information when needed .
19 Setting a Route to a OneT ouch Icon With the OneT ouch menu set up you can now go to a saved address or search. 1. T ap the button in the top right corn er of the Map screen. 2. T ap one of the assigned OneT ouch buttons. 3. If the assigned button is for a search, the list of POIs is displayed.
20 Points of Inter es t (POI) The Magellan RoadMate r eceiver has preloaded POIs that can be used as a destina tion for a route. Selecting a restaurant or findin g a gas station nearby is at your fin gertips. Creating a Route to a POI by Cat egory POIs are categorized into unique categories from gas stati ons to tourist attractions.
21 2. The list of the next freeway exit s and thei r dist ance from your current position appear . 3. Small symbols represent the following service POIs near the exits: •Restaurants •Gas S tations •Car Repair •Accommodations 4. T ap any of th e sym bols to ge t a list of related POIs near the exit.
22 Home Addr ess Y our most frequent destination can be enter ed and saved in the Magellan RoadMate as the Home Address fo r quick and easy access when you ne ed to navigate there. This does no t need to be your real home address. Choose any address you visit frequ ent ly .
23 T raveling on a Route Map Scr een When a route has been calculated, it will be displayed on the Map screen in green with small arrows indicating the direction of travel. The top of the screen displays th e na me of the street that comes next in your T urn List to gether wi th its dist ance.
24 2. On the Main Menu, tap the can cel route icon. 3. Confirm that you want to cancel the route. T ap Ye s . OR 1. T ap the OneT ouch icon from the Map scr een to display the OneT ouch menu. 2. T ap the cancel route icon. 3. Confirm that you want to cancel the route.
25 Multi Destination Routes With the Magellan RoadMate you can create routes with more than one destination. Select one destination and create a single route first.
26 Saving a Multi Destination Route to Y our Address Book Multi destination routes can be saved for later use from the address bo ok. 1. From the Map screen, tap Menu . 2. T ap T rip Options . 3. T ap Edit T rip . 4. The Multiple Destination List is displayed.
T raffic Glos sary RDS : Radio Data System. Infrastructure that broadcasts digital information on the FM band. TMC : T rafc Message Channel, one of the types of information that a Radio Data System can broadcast.
“No Signal” is displayed while searching for trafc signals. Icon can also appear red, depending upon the state it was in when trafc signals were lost. Coupons and Offer s Along the top of the POI Search Results and the Map display you will see a banner that displays coupons and offers from various merchants.
29 Settings With user Settings yo u can customize the Magellan RoadM ate receiver to better suit your personal nee ds and preferences. T apping the Ba ck arrow T ap from an y of the Set ting screens saves your ch anges. Accessing System Sett ings 1. From the Main Menu screen, tap the Settings icon .
30 Selecting Units of Measure Auto power is the duration of time that the Magellan RoadMate receive r remains idle before turning of f automatically . 1. Access the System Settings menu (above ). 2. T ap Unit s. 3. T ap on the desired unit of measu re.
31 Sound Setting V olume fr om Settings 1. From the Main Menu screen, tap the Settings icon. 2. T ap Sound. 3. T a p inside the volume slider bar to set the desired volume level. Muting the So und 1. From the Main Menu screen, tap the Settings icon. 2.
32 Adding Features This option is used when purchasing an addi tion al feature for your receiver that requires a code to authorize it. Check the Magellan web site per iodically for new features, en hancements or eve n software upda tes. 1. From the Main Menu screen, tap the Settings icon.
33 Default System Settings Restoring All Default System Set tings It is useful to set a GPS position if you are not receiving sate llite information quickly du e to travelling over 800 km/500 mi with the Magellan RoadMa te receiver turned off.
.
43 English User Controls If the i nco rre ct pas sword is e ntered 3 tim es, th e proje ctor w ill automat ica lly shut dow n. If you have forgotten your password, please contact your local ofce for support.
44 English User Controls SETUP | Advanced Logo Use thi s func tio n to set the de sired st ar tup s cree n. If chan ges ar e made t hey will ta ke effe ct the n ext tim e the pr ojec tor is powe red on. Optoma: The default startup screen. Neutral: Logo is not displayed on startup screen.
.
46 English User Controls 1. Turn on DHCP to allow the DHCP server to automatically assign an IP , or manually enter the required network information. 2.
.
48 English User Controls Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network (more are possible, the number depends on the combination of IP ID and IP address).
.
.
51 English User Controls Optional Filter Installed Select “Y es” to display warning message after 500 hours of use. Select “No” to turn off warning message. Reset Filter Warning Select “Y es” to reset the dust lter hour counter after replacing or cleaning the dust lter .
52 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control.
53 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp.
54 English User Controls OPTIONS | PointBlank Interactive Choose “On” to enable Interactive and activate the Interactive menu. Dual Pen Choose “On” to enable dual pen simultaneously . Pointer Motion Choose this function to select the Pointer Motion mode: “ Normal ”, “ Draw ”, and “Stable”.
55 English User Controls Choose this function to select the function of the Menu button on the interactive pen. Pointer Motion: Function as toggling among “Normal”, “Draw”, and “Stable” mode PowerPoint Annotation: Function as annotating in the Power - Point slide show .
56 English User Controls Ruby is a embedded project which can bring the high perfor- mance in network projection. Base on network protocol, user can congure the projector remotely . It supports to connect the PC with Projector by USB, Ethernet, and Wireless.
57 English User Controls 2 There are 3 options in this page. • Click “Download”, it displays the interface to download the soft - ware of “Optoma Presenter”. • Click “Crestron”, to enter the control page of Flash UI. • Click “Admin”, the log-in page shows up.
58 English User Controls Alert Setup This page is to set up the alert notication for kinds of error types by sending mail. Alert type is multi-options. SMTP Mail Setup This page is to set up the details of mail sending, ex. mail server IP address, user name, password and mail address of receivers.
59 English User Controls • IP Setup: Click “Obtain an IP address automatically” as auto mode; click “Use the following IP Address” as static mode, IP Ad - dress/Subnet Mask/Default Gateway/ DNS Server are required to be lled and then click “Apply” button.
60 English User Controls Click the following icons under “Play Control” • : Click to disconnect host PC. • : Click to switch session to background. • : Click to change display region. Crestron RoomView This is the control page of Flash UI. Click “Power” to control power on/off of projector .
61 English User Controls Click “T ools”, the following items are included: • Crestron Control: the basic network information of the control system device. • Projector: the ID of each projector in a building for Administrator to control. • User Password: change user ’s password.
.
63 English User Controls How to use the Card Reader The Card Reader application can display packaged images in a USB ash device. 1. Plugging the USB device into USB port of projector, source of Flash Drive is detected, and then USB Flash Devices Detection Screen is displayed.
.
65 English User Controls • Stop: Stop Slide Show Mode. • Delay 3/4/5: Slide Show delay in seconds. • Slide Effect: Following modes are supported. (Slide Right/Slide Down/Slide Up/Slide Auto) • Repeat ON/OFF: Enable/Disable Slide Show Repeat Mode.
.
67 English User Controls Click the button to enter Connect and Search Menu. 1. Enter IP address of projector , select the option “Directly”, and then click “Connect” button to enter log-in interface; or Click “Search” button to search the projectors on network and select projectors to connect.
68 English User Controls • Fixed size mode: FIXED mode allows the user to place a frame on the desktop and only the image enclosed inside the frame is transferred to remote network display .
69 English User Controls • : For Administrator user login. • : For Normal user login. • : Status of the connection for connected • : Status of the connection for not connected. • : For the status and display position of local screen on the network display , change it by clicking on it and a dialog box ap- pears.
.
.
72 English Appendices Image is out of focus Make sure the lens cap is removed. Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance.
.
74 English Appendices On Screen Messages T emperature warning: Fan failed: Lamp warning: Out of display range: Filter warning: If the remote control does not work Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the projector .
75 English Appendices If the Interactive pen does not work Check the input source is PC (VGA, HDMI, Wireless and LAN source) Check the Interactive function is turned On. When using Wireless or LAN connection, and the Pen does not work, check if the Wireless/Network function is turned On.
Ein wichtiger Punkt beim Kauf des Geräts Magellan RoadMate 2035 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Magellan RoadMate 2035 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Magellan RoadMate 2035 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Magellan RoadMate 2035 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Magellan RoadMate 2035 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Magellan RoadMate 2035 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Magellan RoadMate 2035 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Magellan RoadMate 2035. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Magellan RoadMate 2035 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
