Benutzeranleitung / Produktwartung T4300HD des Produzenten Mach Speed Technologies
Zur Seite of 31
T4300HD Instruction Manual Congratulations on purchasing your Trio Personal Media Player! To get the most out of your purchase, please take the time to carefully read through this manual.
Information in the manual is subject to change without notice and is subject to copyright protection. Copying or otherwise reproducing this material without prior written consent is prohibited. Due to Firmware changes, some of the pictures and functions described in this manual may not be the same as are included with your pla y er.
Caution • Do not use the player in exceptionally cold or hot, dusty, damp or dry environments. • Do not drop, strike, or throw your player. Physical damage to y our pl ayer will void ALL warranties.
To power the player off, slide the power switch to the do wn position and hold it there for 5 seconds or until the Trio Logo is displayed. Once the device has powered off, slide the power switch to the up position until it locks i n place.
We recommend charging the player for 8 hours for the initial two charges. Subsequent charges should only take 3-5 hours. Inserting and removing t he Micro SD card Inserting: Ensure that the pla y er is po wered off, and disconnected from the computer.
2. Once you have named your MP3 player, select Finish, and your Windows Media Player will open to the Sync tab. 3. Drag your music to the sync list (on the right of the screen) from the list on the left. Once you have selected the m usic you wish to add to the pla y er, press Start Sync.
4. Windows Media player will load the songs on to your player. 5. Once all the songs you have added are synced to the unit, and Windows Media Player says that is safe to disconnect your MP3 player, disconnect the device.
COPY AND PAS TE Note- This alternate method is used to load v ideos, pictures, and ebook files as well as audio files 1. Connect the MP3 pla y er to a working USB port. 2. When the unit is connected to your computer , it will create a g ray and green icon in the system tra y (lower right hand corner of your desktop).
4. Locate the drive created by the unit, generall y ju st called Remo vable Disk, with a letter i n Parenthesis. Drive letters var y depending on your system configuration. 5. Open the drive by either double left clicking on the drive itself, or b y right clicking to open the option menu then left click on the de sired drive.
8. Repeat step 7 for as many songs as you want to cop y on to the unit. NOTE: MAC Computers When connected to your MAC computer, the device will act as a removable drive. Simply drag your files to the device. Main Menu The main menu of the player lets you access the other m odes of the player.
Search In addition, you are able to enter the search feature by tapping the Search Bar in the upper right hand corner of the desktop. Below the search bar is the Time and a button which will allow y ou to select what you are searching for. MU is music, VID is video, IMA is images, TXT is text files, ALL is to search for anything.
Volume - This icon ma y be w hite or blue, and will display a num ber after the speaker icon. Tapping this icon will bring up a slider which allows you to adjust your volume.
Only 6 videos are displayed on the screen at once, if you have mo re loaded on the player, touch the screen and slide your finger up to scroll the list. To begin playing a file, simply tap that file. Button Explanation Display Mode - This player has a 16:9 screen ratio, and if y our video file is the same ratio, pressing this icon will do nothing.
Previous - Tapping this icon will skip to the previous track, and if you press y our finger there and hold it, the current video will rewind. Play/Pause - Tapping this icon will alternate between play ing and pausing the file.
Caption - Selecting this option will enable or disable captions or subtitles for the current video file. If you do not have a subtitle file for the video y ou are watching, this option will be faded out and unselectable.
• Note- this player will playback files which are in MP3, W MA (non encrypted), APE, and FLAC formats. If your audio fil es are not in one of these formats, the files will not play. W hen you enter Music Mode, you will be presented with a m usic selection screen, which will allow you to select audio files.
Play List - You may have noticed while searching for music, that each audio file has a “Plus Sign” to the right o f it. If y ou tap this “Plus Sign” it will add that particular song to your Playlist. W hen y o u select this icon, it will display all files loaded in your Playlist.
Once you have entered the Music Playback mode, your file should begin pla y ing automatically. This screen will display a visualizer, equalizer m ode, bitrate, repeat mode, file name, artist, album, and l y rics (if available). If you have Album art properly loaded, the CD image in the upper right hand corner will change to that album art.
A - B - This icon controls you’re a-B Repeat Function. While a file is playing, tap this icon to set an A point. Allow the file to proceed and tap the icon again. This will set your B point. At this point, the file will play from points A to B over and over again.
eBook Mode The eBook mode allows you to view your text, lyric and caption files. Y ou can even listen to your music while reading. • Please note that eBook mode will only access files in TXT, LRC or SRT formats. If your files are not in one of these formats, the y will not be recognized.
Page Jump - Tapping this icon will allow you to jump to a specific page in the file. Set a page number from 00001 to 99999 and select yes to jump to that page. Please note that that if you set the number higher than the number of pages that your file actually contains, it will simply jump to the last page of the file.
Tap a thumbnail to begin displaying your images. W hen viewing an image, the image will adjust automatically for optimum di splay . To move to the next or previous file, touch the middle of the screen and slide your finger to the left or to the right.
Start Slideshow - Tapping this icon will begin display ing y our images as a slideshow. The slideshow timer is set in the Photo Submenu, explained below. Tapping this icon again will stop the slideshow. Optimize Display - Tapping this icon will restore your im age to optimum display.
The recording screen will display the name of the file being recorded (VREC001.WAV in the example above) as well as the length of the current recording and the maximum amount of recording time left.
Search Control - Tapping this allows you to toggle betw een search controls and scan for stations. A uto Scan - Automatically scans the available station s and saves any with a strong signal as a preset. This will override any presets you have manually saved.
Begin Recording - This icon is located in the upper right hand corner of the screen, by the volume and time . When y ou tap this icon, it will immediately enter recording mode and begin recording the FM station you are currently receiving. W hen in this mode, follow the instructions listed in Recording mode.
Tap the or icons to swap between months and the Icon to return to the current date. Your Date and tim e is set using the System Time option in the Settings . Time Zone The Time Zone option lists the current time (based on the time you have set in the player) of a number of prominent cities throughout the world.
Tapping the or icons will swap between different cities and tap the city name to bring up a list of cities which will allow you to select one directly . If there is one city you check regularly, tap the icon to set the current city as your default. Stopw atch You can use the player as a stopwatch to time yourself of y our frie nds.
Calculator This player comes equipped with a standard calculator. Tap the icons on the screen to perform your calculations. System Settings The system settings menu allows you to adjust m ost facets of y our play er. Whether the desktop picture, screen brightness, s y stem tim e, or power savings settings, it’s all found here.
Remember that in order to save an y settings changes y ou m ake, w hen y ou power off, do so by sliding the power switch to the down position for 5 seconds.
A uto Shut Time You can set this option to power the player off when the pla y er i s idle (no music playing, not watching a video, etc) in order to conserve batter y life. TV Out Setting This is the settings change for the HDMI output on the pla y er.
Ein wichtiger Punkt beim Kauf des Geräts Mach Speed Technologies T4300HD (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mach Speed Technologies T4300HD noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mach Speed Technologies T4300HD - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mach Speed Technologies T4300HD reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mach Speed Technologies T4300HD erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mach Speed Technologies T4300HD besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mach Speed Technologies T4300HD verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mach Speed Technologies T4300HD. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mach Speed Technologies T4300HD gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
