Benutzeranleitung / Produktwartung LCS-WR5-2214-A des Produzenten Longshine
Zur Seite of 48
802.1 1g W ireless Broadband Router User ’ s Manual.
FCC Certifications Federal Communication Commission Interference St atement This equipment has been tested an d found to comply with the limit s for a Class B digit al device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pr otection against harmful interference in a residential inst allation.
CE Mark W arning This equipment complies with the requirements relating to electromagnetic compatibility , EN 55022 class B for ITE, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member S tat es relating to electromagnetic compatibility .
T able of Contents Unpacking Information ············································································· 1 In.
Firewall Confi guratio n ····································································· 31 Port Filtering ·········.
1 Unpacking Information Thank you for purchasi ng the product. Before you start, pl ease check all the cont ents of this package. The product packa ge should include the fol lowing: 1. One Wireless Router 2. One power adapter 3. One User Manual (CD) 4.
2 Introduction T o Wireless Router General Desc ription The Wireless Router built-i n with 4-port 10/100Mbps F ast Ethernet Switch is the latest generation of Wireless router p roduct for Home/Of fice and SOHO users.
3 Key Features The switch provides the fol lowing key features: Complies with IEEE 802. 1 1b/g wireles s standards Provides one 8 02.1 1b/g wireless Rev erse SMA detachable antenna High sp.
4 The Front Panel LED definition System LEDs System LED indicators l ocate on the front panel for show ing the operating status of the whole device. PWR (Power) LED This indicator lights gre en when the Wireless Ro uter is receiving power; otherwise, it is off.
5 Port LEDs (W AN) Port LED (WAN) indicators locate on the front panel for s howing the operating stat us of W AN port. Act/Link LED The LED stay s light (green) means the p ort has good linkage to its associat ed devices. The LED will blink green when there is traffic transverse the port.
6 3. Do the same with the second part. 4. Place the Router Wall-mount option Before attach this router on the wall, you have to finish the desktop option steps first. 1. Select a location with access for cables and a power outlet. 2. Unplug the unit. Place it upside down on a flat surface and mark the two holes for anchors.
7 Installing And Using W ireless Router This Chapter provides a step-by-step gui de to the installation and configuration of the Wireless Router . We suggest you go over t he whole chapter and then do more advanced operation.
8 Computer configuration setup In order to communic ate with this Wireless Rout er , you hav e to configure the IP addresses of your c omputer to be compatibl e with the device.
9 3. C hoose Internet Proto col (TCP/IP) and click Properties. 4. Y ou may choo se “Obtain an IP address automatically ”(recommend) to get IP address automatically or choose “Use the followi ng IP address” to specify IP addresses manuall y . Please click the OK button after yo ur configuration.
10 Management Wireless Router configuration setup In order to make the whol e network operate succ essfully , it is necessary to configure the Wireless Router through your computer has a WEB br owser installed. Pleas e follow up the steps listed below .
11 4. The Graphic User Interface After the passwor d authorization, the Setup Wizar d shows up as the home pag e of the Graphic User int erface. Y ou may click on eac h folder on left column of each page to get access to each conf iguration page.
12 Setup Wizard If you are using the r outer for the first time, you may follo w the procedur es of the setup wizard to do a step-by-step config uration. Note: The following instruction d oes an overall intr oduction to the Setup W izard. For detail information to eac h item, please refer to instr uction of each page.
13 3. Mark the check box to ena ble synchronizing time by NTP server . Select the reli gion you live and a NTP server by click ing the drop list then click “Next”.
14 5. Select a WAN access type for the router to connect to Inte rnet. Fill in the parameters that required in eac h blank, and then click the “Next ” button.
15 7. Click the drop list to select the encryption type for your wireless netw ork. Fill in the parameters for the e ncryption type you select and click finish to complet e configuration.
16 Operation Mode T o select an operatio n mode for this router , click on the mode that you wa nt to perform and click the button to execute..
17 Wireless Wireless Access Point builds a wireless LA N and can let all PCs equi pped with IEEE802.1 1b/g wireless network adaptor co nnect to your Intranet. It supports WEP en cryption and MAC addre ss filter to enhance the security of your wireless network.
18 Channel Number The channel used by the wireless LAN. All devices i n the same wireless LA N should use the same chan nel. Associated Clients Click "Show Active Clients" button, then an "A ctive Wireless Client T able" will pop up.
19 from this active wireless station. Rx Packet The number of receiv ed packets that are rece ived by this active wireless station. TX Rate The transmission rate Power Saving Shows if the wireless client is in Power Saving mode Expired Time This is the time in seco nd before dissociat ion.
20 Advanced Settings Y ou can set advanced wireless LAN parameters of this ro uter . The parameters inclu de Authentic ation T ype, Fragment Threshold, RTS Threshold, Beacon Interv al, Data Rate, Preamble T ype, Broadc ast SSID, IAPP and 802.1 1g Protection.
21 RTS Threshold If the packet size is smalle r the RTS threshold, the wireless router will n ot send this packet by using the RTS/CTS mechanism. Beacon Interval The period of time how l ong a beacon is broadcasted. Data Rate The "Data Rate" is the d ata packets limitation this wireless router can tr ansmit.
22 Security At the page, you can set up the WE P , WP A Encryption to ensure the security of your Wireless. Configuration Encryption T o enable WEP , WP A, WP A2 and WP A2 Mixed encryption modes, select the option in the drop list. If you select none, any data will be transmitted without Encry ption and any station can access the ro uter .
23 WP A2 Cipher Suite Select the WP A2 Cipher Suite to be TKIP or AES Pre-Shared key Format T o decide the format, s elect what you need in the drop list.
24 Access Control T o restrict the Number of Access authenticat ion of Stations, Set up the control list in this page. Configuration Wireless Access Control Mode Click on the drop l ist to choose the access control mode.
25 WDS Setting Wireless Distribution Syste m allows the router to communi cate with other APs wirelessly . T o make it work, you must e nsure that these APs and the Router are in th e same Channel and add these APs MAC Address and Comment values into the WDS list.
26 TCP/IP Setting LAN Interface Setup T o set up the configuratio n of LAN interface, Privat e IP of you router LAN Port and Subnet mask for yo ur LAN segment. Configuration IP address The IP of your Router LAN port (Default 19 2.168.1.1) Subnet Mask Subnet Mask of you LAN ( Default 255.
27 W AN Interface Setup This page allows us ers to configure those parameters for connecting to Internet. Y ou may select the WAN Acc ess T ype from the drop list and configure parameters for eac h mode. Static IP Mode IP Address, Subnet Mask and Default Gateway Fill in the IP address, Subn et Mask and Default Gateway that provided b y your ISP.
28 PPPoE Mode User Name, password and service nam e Fill in the User Name, password and service name that provided by your ISP . Connection T ype “Continuous” is for Always keep connection “Connect on demand” is for bill by connection time.
29 PPTP Mode IP Address, Subnet Mask, Server IP Address, User Name and Password Fill in the IP address, Subnet Mask, Server IP Address, User Name and passw ord that provided by y our ISP . MTU Size T o Enable the Maximum T ransmission Unit of Rout er setup.
30 Common configurations for W AN interface There are some settings are able to be confi gured on each WAN access types: Enable We b Server Access on W AN from port T o Enable the user to acc ess this.
31 Firewall Configuration Port Filtering The firewall could n ot only obstruct outside intruders from i ntruding your system, but also restricting th e LAN users. Port Filtering T o restrict certain type of data packets from your LAN t o Internet through the Ro uter , add th em on the Current Filtering T able.
32 IP filtering The Wireless Router c ould filter the outgoin g packets for security or management consid eration. Y ou can set up the fi lter against the IP addresses to block sp ecific internal users from acc essing the Internet. Configuration 1. Click the check box of “Enable IP Filtering” to enable the function.
33 MAC filtering The Wireless Router c ould filter the outgoin g packets for security or management cons ideration. Y ou can set u p the filter against the MAC addresses to block sp ecific internal users from acc essing the Internet. Configuration 1. Click the check box of “Enable MAC Filt ering” to enable the fun ction.
34 Port forwarding The Port Forwarding allows you to r e-direct a particular range of service port numbers (from the Internet/W AN Ports) to a particular LAN IP address. It helps you to host some servers behind t he router NA T firewall. Configuration 1.
35 URL Filtering The URL Filter allows us ers to prevent certain URL from accessing by users in LAN. This filter will block those URLs that conta in certain keywords. Configuration 1. Click the check box of “Enable URL Filtering” to enable the fun ction.
36 Virtual DMZ The virtual DMZ is use d to enable protocols, which need to open ports on the router . The router will for ward all unspecif ied incoming traffic to the host specified in this page. T o configure it, enter the Host IP (private IP address) and Click “Apply changes” to enact the se tting.
37 Management Status In the home page of the Wireless Router , the left navigation bar s hows the options to configure the system. In the right navigati on screen is the summary of system status for view ing the configurations. System Uptime The period that you power the device on.
38 Channel Number The channel used by the wireless LAN. All devices in the same wireless LAN sh ould user the same ch annel Encryption The security encryption status of this wireless network BSSID The Basi c Service Set Identi ty of this router .
39 Statistics On this page, you can m onitor the sent & received packets counters of wireless, Ethernet LAN, an d Ethernet WAN. T o see th e latest report, click refresh button. DDNS This page allows us ers to connect to DDNS. T o enable DDNS, Ma rk the “Enable DDN S” checkbox.
40 Time Zone Setting This page allows us ers to configure the tim e of the router . T o specify manually , fill i n the blanks in “Current Time” and click the “Apply Ch ange” button.
41 the “clear” button to clean the log table. Upgrade Firmware T o Upgrade Firmware, 1. Click “browse… ” button to select the firmw are you want to upgrade. STEPS 2. Click Upload to start the u pgrade process. Pleas e don’t close the WEB-br owser and wait for proce ss to complete.
42 Save and Reload Settings T o save setting to file, click “Save...” button. T o load setting from file, 1. Click “Browse…” on the to select the file 2.
43 61LS-0440A+207C Product Specifications Standard IEEE802.3, 10BASE-T IEEE802.3u, 100BASE-TX IEEE802.3x full duplex operation and flow control IEEE802.1 1b wireless LAN infrastructure IEEE802.1 1g wireless LAN infrastructure Interface 1 * W AN port 4 * 10/100 RJ-45 Fast Ethernet switching ports Antenna: 802.
Ein wichtiger Punkt beim Kauf des Geräts Longshine LCS-WR5-2214-A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Longshine LCS-WR5-2214-A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Longshine LCS-WR5-2214-A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Longshine LCS-WR5-2214-A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Longshine LCS-WR5-2214-A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Longshine LCS-WR5-2214-A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Longshine LCS-WR5-2214-A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Longshine LCS-WR5-2214-A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Longshine LCS-WR5-2214-A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
