Benutzeranleitung / Produktwartung PPS1UW des Produzenten Linksys
Zur Seite of 32
EtherFast ® Wireless- Ready USB PrintSer v e r Use this Guide to install: Model No.: PPS1UW User Guide Instant EtherFast ® Series.
COPYRIGHT & TRADEMARKS Copyright © 2002 Linksys, All Rights Reserved. Instant EtherFast and EtherFast are r eg- istered trademarks of Linksys. Micr osoft, Windows, and the Windows logo are r egister ed trademarks of Microsoft Corporation. All other trademarks and brand names ar e the property of their respective pr oprietors.
T able of Contents Chapter 1: Introduction 1 The Instant EtherF ast ® W ireless-Ready USB PrintSer ver 1 F eatures 1 Package Contents 2 Chapter 2: Getting to Know the EtherFast ® Wireless-Ready USB .
Chapter 1: Introduction Congratulations on your purchase of the Instant EtherF ast ® W ireless-Ready USB PrintServer , the fastest and easiest wa y to network y our printers. No w you can share y our printing resources without tying up y our w orkstation per- formance with pending print jobs.
4 Chapter 2: Getting to Know the EtherFast ® Wireless-Ready USB PrintSer v er LAN Gr een . The LAN LED serves tw o pur poses. If the LED is continuously illuminated , the PrintServer is successfully connected to a device through the LAN port.
EtherFast ® Wireless-Ready USB PrintServer 6 The PrintServer does not ha ve an ON/OFF po wer s witch. Whene ver its po wer adapter is plugged into a po w er suppl y , the PrintSer ver is po wered on. The PrintServer can be po w ered on before, during, or after your netw ork is po w ered on.
1. Inser t the Setup Utility CD . A built-in autor un will begin the installation of the PrintServer’ s Bi-Admin Management Utility , and displa y F igure 4-1. Click the product you wish to install, follo wed b y the Install tab to continue. 2. The installation routine will begin to run and displa y F igure 4-2.
EtherFast ® Wireless-Ready USB PrintServer 10 1. T o begin dri v er installation, click the Start button, and select Run . T ype D:Driv erW in9xntsetup.ex e (w here “D” is the letter of your CD-R OM dri ve) in the Open f ield that appears. Click the OK button.
EtherFast ® Wireless-Ready USB PrintServer 12 Instant EtherFast ® Series 11 5. Driv er installation is no w completed , but the Print Dri ver still needs to be conf igured. The PrintServer will not function properly until the Print Driv er is conf igured.
Instant EtherFast ® Series 13 9. The Add Printer W izard screen will come up at this point. F ollo w the stan- dard procedure for adding printers under W indo ws. If you ha ve an y ques- tions on adding printers, please refer to your printer’ s documentation.
EtherFast ® Wireless-Ready USB PrintServer 16 Chapter 5: Bi-Admin: PrintSer v e r Management The PrintServer is managed by a utility pro gram called Bi-Admin on the W ireless-Ready PrintServer’ s Setup CD .
EtherFast ® Wireless-Ready USB PrintServer 18 Instant EtherFast ® Series 17 Obtaining Device Information: The Device Information Icon T o access information about the W ireless-Ready PrintServer , e.
EtherFast ® Wireless-Ready USB PrintServer 20 Instant EtherFast ® Series 19 Exiting Bi-Admin: The Application Exit Icon T o exit the Bi-Admin pro gram, just click on the Exit icon. Configuring Wireless Settings: The Wireless Icon T o conf igure the wireless settings, just click on the Wir eless icon.
EtherFast ® Wireless-Ready USB PrintServer The Bi-Admin program can locate Linksys PrintServers on netw orks other than your o wn, giv en your netw ork is r unning TCP/IP across a W AN or other net- w ork-to-netw ork link via a router .
23 When the Conf igure Serv er scr een appears, enter the PrintServer name (in Figure 6-3, the example is SCA71107) . Then enter your pass- w ord (if y ou created one) into the P assw or d f ield , and type it again in the V erify Pass w ord f ield to conf ir m it.
25 Click the Wir eless tab to allow y ou to conf igure infor mation about the PrintServer . The values on this screen are conf igured through your Instant W ireless™ Netw ork PC Card. See the Card’ s documentation for instructions on conf iguration.
27 Chapter 7: Advanced Proper ties The Adv anced Properties section of the W eb-based Utility is for users w ho ha ve a thorough understanding of netw orks and netw ork settings. Changing these settings can cause inter ruption of network communication and mak e the PrintServer cease to function properly .
29 Click the Logical Printers ta b to vie w or change the lo gical printer settings of the PrintServer . F or each Logical Printer , the follo wing f ields are a v ailable: Logical Printer(P ort) - Select the Logical Printer P or t you wish to conf igure.
31 Click the SNMP tab to view or change the SNMP settings of the Wireless- Ready PrintServer . The PrintServer supports SNMP (Simple Network Management Protocol). This allo ws netw ork super visors to monitor and control the PrintServer using netw ork management platforms such as HP OpenV ie w , IBM SystemVie w , etc.
33 Chapter 8: Internet Printing Protocol (IPP) IPP (Internet Printing Protocol) is a new standards-based system to allo w remote printing from a PC to an y accessible printer . Normally , the printer will be attached to a computer or other device that functions as an IPP Server .
35 5. Click Sa v e to create the IPP port on your system. Y ou will see a message conf irming that the port has been created and then Figure 8-2. 6. Perform one of these steps. Select an existing printer to use the ne w port, and click OK . OR Click the Add Ne w Printer button to create a ne w printer to use the IPP port.
37 IPP Client Setup f or Windo ws 2000 and XP W indo ws 2000 and XP ha ve their o wn IPP Client, and there is no need to install the supplied IPP Client Softw are. T o use this IPP Client with the PrintSer ver , follo w this procedure: 1. Star t the Add Printer W izard.
EtherFast ® Wireless-Ready USB PrintServer 40 Chapter 9: DHCP Suppor t for the EtherFast ® Wireless-Ready USB PrintSer v er T o use DHCP , which assigns non-static IP addresses, y ou must ha ve a DHCP server and DHCP management software. Otherwise, the PrintServer’ s IP address will remain unkno wn, and connecting to it will impossib le.
Appendix B: About Bi-Directional Printing Normal printing only sends print signals from a PC to a printer . Bi-direction- al printing , also called bitronic printing, refers to a printer’ s ability to do just the opposite—talk back to a PC to notify it of a print job status, paper jams, etc.
Appendix D: Glossar y AppleT alk - An Apple Computer netw orking system that suppor t Apple’ s pro- prietary local talk. Bit - A binar y digit. The v alue—0 or 1—used in the binary numbering system. Also, the smallest form of data. Boot - T o cause the computer to star t executing instructions.
Basicall y , a f irew all, w orking closel y with a router , examines each netw ork packet to determine whether to forw ard it to w ard its destination. Firmw ar e - Code that is written onto read-only memory (R OM) or pro gram- mable read-onl y memory (PR OM).
NetBEUI ( NetB IOS E xtended U ser I nterface) - The transport lay er for NetBIOS. NetBIOS and NetBEUI w ere originall y part of a single protocol suite that was later separated. NetBIOS sessions can be transported o ver NetBEUI, TCP/IP and SPX/IPX protocols.
If a recei ver is not tuned to the right frequenc y , a spread-spectrum signal looks like background noise. There are tw o main alter nativ es, Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS). Static IP Address - A permanent IP address that is assigned to a node in an IP or a TCP/IP network.
Appendix E: Specifications Standards: IEEE 802.3 and 802.3u, USB 1.0 and 1.1, PCMCIA 2.0 Protocol: TCP/IP , NetBEUI, AppleT alk P orts: One 10/100 RJ-45 Port, One USB Port, One Power Port PCMCIA: T yp.
54 Appendix G: Warrant y Information BE SURE TO HA VE Y OUR PR OOF OF PURCHASE AND A B ARCODE FR OM THE PR ODUCT'S P A CKAGING ON HAND WHEN CALLING.
Instant EtherFast ® Series 55 Appendix H: Contact Information F or help with the installation or operation of this product, contact Linksys T echnical Suppor t at one of the phone numbers or Internet addresses below .
© Copyright 2002 Linksys, All Rights Reserved. http://www .linksys.com.
Ein wichtiger Punkt beim Kauf des Geräts Linksys PPS1UW (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Linksys PPS1UW noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Linksys PPS1UW - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Linksys PPS1UW reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Linksys PPS1UW erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Linksys PPS1UW besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Linksys PPS1UW verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Linksys PPS1UW. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Linksys PPS1UW gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
