Benutzeranleitung / Produktwartung MKX (2016) des Produzenten Lincoln
Zur Seite of 560
March 2015 First Printing Owner’s Manual MKX Litho in U.S.A. Owner’ s M anual 20 16 MKX 20 1 6 MKX Owner’ s M anual lincolnowner.com lincolncanada.
The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.
.
Introduction About This Manual ............................................ 7 Symbols Glossary .............................................. 7 Data R ecording .................................................. 9 California Proposition 65 ............
Security Passive Anti-Theft System ............................ 80 Anti-Theft Alarm ............................................... 81 Steering Wheel Adjusting the Steering Wheel - V ehicles With: Manual Adjustable Steering Column ....................
Heated Seats .................................................. 154 Climate Controlled Seats ............................ 155 R ear Seat Armrest ......................................... 157 Universal Garage Door Opener Universal Garage Door Opener ..
Driving Aids Driver Alert ...................................................... 231 Lane K eeping System ................................. 232 Blind Spot Information System .................. 237 Steering .............................................
Fuel Filter ......................................................... 316 Changing the 12V Battery ........................... 316 Checking the Wiper Blades ........................ 318 Changing the Wiper Blades ....................... 318 Adjusting the Headlamps .
Scheduled Maintenance General Maintenance Information ........... 499 Normal Scheduled Maintenance ............. 503 Special Operating Conditions Scheduled Maintenance .............................................. 507 Scheduled Maintenance R ecord ..
ABOUT THIS MANU AL Thank you for choosing Lincoln. W e recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it. W ARNING Driving while distracted can result in loss of vehicle control, crash and injury .
Safety alert See Owner' s Manual E162384 Air conditioning system Anti-lock braking system Avoid smoking, flames or sparks Battery Battery acid Brake fluid - non petroleum based Brake system Cabin.
Hazard warning flashers Heated rear window Heated windshield Interior luggage compartment release Jack E161353 K eep out of reach of children Lighting control Low tire pressure warning Maintain correc.
Additionally , when your vehicle is in for service or repair , Ford Motor Company , Ford of Canada, and service and repair facilities may access or share among them data for vehicle improvement purposes.
where required by law enforcement, other government authorities or other third parties acting with lawful authority . Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada.
PERCHL ORATE Certain components in your vehicle such as airbag modules, safety belt pretensioners and remote control batteries may contain perchlorate material. Special handling may apply for service or vehicle end of life disposal. For more information visit: W eb Address www .
Collision R epairs W e hope that you never experience a collision, but accidents do happen. Genuine Ford replacement collision parts meet our stringent requirements for fit, finish, structural integrity , corrosion protection and dent resistance.
MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs.
PRO TECTING THE ENVIRONMENT Y ou must play your part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps toward this aim.
GENERAL INFORMATION See the following sections for directions on how to properly use safety restraints for children. W ARNINGS Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your vehicle.
R ecommendations for Safety R estraints for Children Recommended restraint type Child size, height, weight, or age Child Use a child safety seat (sometimes called an infant carrier , convertible seat, or toddler seat). Children weighing 40 lb (18 kg) or less (generally age four or younger).
• Y ou are required by law to properly use safety seats for infants and toddlers in the United States and Canada. • Many states and provinces require that small children use approved booster seats until they reach age eight, a height of 4 feet 9 inches (1.
When installing a child safety seat with combination lap and shoulder belts: • Use the correct safety belt buckle for that seating position. • Insert the belt tongue into the proper buckle until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle.
E142531 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it.
the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to your vehicle. Sometimes, a slight lean toward the buckle will provide extra help to remove remaining slack from the belt. 9 . Attach the tether strap (if the child seat is equipped).
2. After positioning the child safety seat in the proper seating position, grasp the shoulder belt and lap belt together behind the belt tongue. E142530 3. While holding the shoulder and lap belt portions together , route the tongue through the child seat according to the child seat manufacturer' s instructions.
Note: The lock-off device on some child restraints may not accommodate the shoulder portion of the inflatable safety belt. Follow all instructions provided by the manufacturer of the child restraint regarding the necessary and proper use of the lock-off device.
.
Use of Inboard Lower Anchors from the Outboard Seating Positions (Center Seating Use) W ARNING The standardized spacing for LATCH lower anchors is 11 inches (28 centimeters) center to center .
E142537 Perform the following steps to install a child safety seat with tether anchors: Note: If you install a child seat with rigid LATCH attachments, do not tighten the tether strap enough to lift the child seat off your vehicle seat cushion when the child is seated in it.
BOOSTER SEATS W ARNING Never place, or allow a child to place, the shoulder belt under a child' s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.
If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child' s head (as measured at the tops of the ears) above the top of the seat.
E142597 If the booster seat slides on the vehicle seat upon which it is being used, placing a rubberized mesh sold as shelf or carpet liner under the booster seat may improve this condition. Do not introduce any item thicker than this under the booster seat.
W ARNINGS Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot protect the child from injury in a crash, which may result in serious injury or death. Never use pillows, books, or towels to boost a child.
R ecommendations for attaching child safety restraints for children Use any attachment method as indicated below by X Combined weight of child and child seat Restraint T ype Safety belt only Safety be.
E1 12197 The childproof locks are located on the rear edge of each rear door and must be set separately for each door . Left-Hand Side T urn counterclockwise to lock and clockwise to unlock. Right-Hand Side T urn clockwise to lock and counterclockwise to unlock.
PRINCIPLE OF OPERATION W ARNINGS Always drive and ride with your seatback upright and the lap belt snug and low across the hips. T o reduce the risk of injury , make sure children sit where they can be properly restrained. Never let a passenger hold a child on his or her lap while your vehicle is moving.
• Height adjuster at the front outboard seating positions. • Safety belt pretensioner at the front outboard seating positions. • Belt tension sensor at the front outboard passenger seating position. · Safety belt warning light and chime. · Crash sensors and monitoring system with readiness indicator .
Slide the clip away from the tongue so there is no loose webbing when an occupant or child seat is buckled up. Y ou can also use the sliding clip to raise the tongue and prevent it from rattling or to ease access to the tongue.
V ehicle Sensitive Mode This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle movement.
3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode.
The fully inflated belt' s increased diameter more effectively holds the occupant in the appropriate seating position, and spreads crash forces over more area of the body than regular safety belts. This helps reduce pressure on the chest and helps control head and neck motion for passengers.
SAFETY BEL T W ARNING LAMP AND INDICAT OR CHIME This lamp illuminates and an audible warning will sound if the driver' s safety belt has not been fastened when the vehicle' s ignition is turned on. Conditions of operation Then... If ... The safety belt warning light illuminates 1-2 minutes and the warning chime sounds 4-8 seconds.
SAFETY BEL T MINDER Belt-Minder ™ This feature supplements the safety belt warning function by providing additional reminders that intermittently sound a tone and illuminate the safety belt warning light when you are in the driver seat or you have a front seat passenger and a safety belt is unbuckled.
Deactivating and Activating the Belt-Minder Feature W ARNING While the system allows you to switch this feature off , the intent of the system is to remind you to wear your safety belt to improve your chance to survive an accident. W e recommend you leave the system switched on for yourself and others who may use the vehicle.
Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a crash be replaced. However , if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly , they do not need to be replaced.
The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries.
PRINCIPLE OF OPERATION W ARNINGS Airbags do not inflate slowly or gently , and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. All occupants of your vehicle, including the driver , should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.
While the system is designed to help reduce serious injuries, contact with a deploying airbag may also cause abrasions or swelling. T emporary hearing loss is also a possibility as a result of the noise associated with a deploying airbag.
Proper Driver and Front Passenger Seating Adjustment W ARNING National Highway T raffic Safety Administration (NHTSA) recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant ’ s chest and the driver airbag module.
W ARNINGS Any alteration or modification to the front passenger seat may affect the performance of the front passenger sensing system which could seriously increase the risk of injury or death.
If a person of adult size is sitting in the front passenger seat, but the airbag off indicator lamp is lit, it is possible that the person is not sitting properly in the seat. If this happens: • T urn the vehicle off and ask the person to place the seatback in the full upright position.
on the floor . Sitting improperly can increase the chance of injury in a crash event. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.
SIDE AIRBAGS W ARNINGS Do not place objects or mount equipment on or near the airbag cover , on the side of the seatbacks (of the front seats), or in front seat areas that may come into contact with a deploying airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.
The design and development of the side airbag system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag T echnical W orking Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags.
The Safety Canopy will deploy during significant side crashes or when a certain likelihood of a rollover event is detected by the rollover sensor . The Safety Canopy is mounted to the roof side-rail sheet metal, behind the headliner , above each row of seats.
Y our vehicle has a collection of crash and occupant sensors which provide information to the restraints control module. The restraints control module deploys (activates) the front safety belt pretensioners, driver airbag, passenger airbag, knee airbag(s), seat mounted side airbags, the Safety Canopy and optional rear inflatable safety belts.
AIRBAG DISPOSAL Contact your authorized dealer as soon as possible. Airbags must be disposed of by qualified personnel. 54 MKX (CD9) Canada/United States of America, enUSA, ASO/OGC R eview Supplementa.
GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with Part 15 of the FCC Rules and with Industry Canada license-ex empt RSS standard(s). Operation is subject to the following two conditio.
REMO TE CONTROL Intelligent Access K ey E144506 The intelligent access keys operate the power locks and the remote start system. The key must be in your vehicle to activate the push-button start system. R emovable Key Blade The intelligent access key also contains a removable mechanical key blade that you can use to unlock the driver door .
E176225 1. Slide the release on the back of the remote control and pivot the cover off . E153890 2. Insert a coin into the slot and twist to separate the housing. E176226 3. R emove the batteries. 4. Install new batteries with the + facing each other .
V ehicles with automatic climate control can be configured to operate when the vehicle is remote started. See Automatic Climate Control (page 140). Many states and provinces have restrictions for the use of remote start. Check your local and state or provincial laws for specific requirements regarding remote start systems.
Y ou may have to be closer to your vehicle to remotely switch off your vehicle after remote starting. This is due to the added noise of your running vehicle. Y ou can disable or enable the remote start system through the information display . See General Information (page 114).
PRINCIPLE OF OPERATION MyK ey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys can be activated with these restricted modes. Any keys that remain unprogrammed are referred to as administrator keys or admin keys.
• V arious vehicle speed minders can be set. Once you select a speed, it will be shown in the display , followed by an audible tone when the preselected vehicle speed is ex ceeded. • Audio system maximum volume of 45%. A message will be shown in the display when you attempt to ex ceed the limited volume.
2. Access the main menu on the information display controls. Use the arrow keys to get to the following menu selections: Action and Description Message Press the OK button or the right arrow key .
Action and Description Message All MyK eys Cleared Note: When you clear your MyK eys, you remove all restrictions and return all MyK eys to their original admin key status.
CHECKING MYKEY SY STEM ST ATUS Y ou can find information on programmed MyK ey(s) using the information display control on the steering wheel. See Information Displays (page 114). T o find information on programmed MyKey(s), press the left arrow button to access the main menu and scroll to: Description Message Press the OK button.
USING MYKEY WITH REMO TE ST ART SY STEMS MyK ey is not compatible with non Ford-approved, aftermarket remote start systems. If you choose to install a remote start system, see an authorized dealer for a Ford-approved remote start system. MYKEY TROUBLESHOO TING Potential Causes Condition I cannot create a MyK ey .
Potential Causes Condition Program a spare key . See Passive Anti-Theft System (page 80). I lost a key . MyK ey distances do not accumulate. • The MyK ey user is not using the MyK ey . • An admin key holder cleared the MyK eys and created new MyK eys.
L OCKING AND UNL OCKING Y ou can use the power door lock control or the remote control to lock and unlock your vehicle. Power Door L ocks The power door lock control is on the driver and front passenger door panels. E138628 Unlock. A Lock. B Door Lock Indicator An LED on each door window trim illuminates when you lock the door .
unlock button once. The unlocking mode applies to the remote control, keyless entry keypad and intelligent access. Y ou can also change between the unlocking modes using the information display .
Right-Hand Side T urn counterclockwise to lock. Unlocking the Doors If the central locking function does not operate, unlock the driver door and then unlock all other doors individually by pulling the interior door handles.
Smart Unlocks for Intelligent Access K eys This helps to prevent you from locking your key inside the passenger compartment or rear cargo area. When you electronically lock your vehicle with any door .
Enabling or Disabling Y ou can enable or disable the autounlock feature in the information display or an authorized dealer can do it for you. See General Information (page 114). Illuminated Entry The interior lamps and some exterior lamps illuminate when you unlock the doors with the remote control.
Note: Be careful when opening or closing the liftgate in a garage or other enclosed area to avoid damaging the liftgate. Note: Do not hang anything, for ex ample a bike rack, from the glass or liftgate. This could damage the liftgate and its components.
POWER LIFT GATE (If Equipped) W ARNINGS It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts.
Note: Be careful when opening or closing the liftgate in a garage or other enclosed area to avoid damaging the liftgate. Note: Do not leave the liftgate open while driving. This could damage the liftgate and its components. From the Instrument Panel E138633 Press the button on the instrument panel.
Stopping the Liftgate Movement Y ou can stop the liftgate movement by doing any of the following: • Pressing the liftgate control button. • Pressing the liftgate button on the remote control twice. • Pressing the liftgate button on the instrument panel.
Hands-Free Feature (If Equipped) Make sure you have an intelligent access transmitter within 3 ft (1 m) of the liftgate. E201983 2 1 1. Move your foot under and away from the rear bumper detection area in a single-kick motion. Do not move your foot sideways or the sensors may not detect the motion.
Y ou can operate the keypad with the factory-set five-digit entry code. The code is on the owner ’ s wallet card in the glove box and is available from an authorized dealer . Y ou can also program up to five of your own five-digit personal entry codes.
Locking and Unlocking the Doors Locking All Doors Press and hold 7·8 and 9·0 simultaneously with the driver door closed. Y ou do not need to enter the keypad code first. Unlocking the Driver Door Enter the factory-set or your personal five-digit code.
The factory-set code appears in the information display for a few seconds. Note: The code may not display until after any other warning messages first display .
P ASSIVE ANTI-THEFT SYS TEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in engine starting problems and a loss of security protection.
Make sure that the ignition is switched off before beginning this procedure. Make sure that you close all the doors before beginning and that they remain closed throughout the procedure.
The direction indicators will flash and the horn will sound if unauthorized entry is attempted while the alarm is armed. T ake all remote controls to an authorized dealer if there is any potential alarm problem with your vehicle. Arming the Alarm The alarm is ready to arm when there is not a key in your vehicle.
ADJUS TING THE STEERING WHEEL - VEHICLES WITH: MANU AL ADJUS T ABLE STEERING COLUMN W ARNING Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 145).
End of T ravel Position The steering column sets a stopping position just short of the end of the column position to prevent damage to the steering column. A new stopping position sets if the steering column encounters an object when tilting or telescoping.
Press and hold the seek button to: • T une the radio to the next station up or down the frequency band. • Seek through a track. VOICE CONTROL E145980 V oice recognition. A End call. B Answer call. C See MyLincoln T ouch ™ (page 392). CRUISE CONTROL T ype 1 E145976 T ype 2 E145977 See Cruise Control (page 223).
Use this control to access some of the MyLincoln T ouch features in the information display . Navigate through the screen and press OK to select. See MyLincoln T ouch ™ (page 392). HEATED STEERING WHEEL (If Equipped) See MyLincoln T ouch ™ (page 392).
WINDSHIELD WIPERS Note: Fully defrost the windshield before you switch the windshield wipers on. Note: Make sure you switch the windshield wipers off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
AUT OWIPERS (If Equipped) Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure you switch off the windshield wipers before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
Note: When you set the wiper system to intermittent wipe and the autowiper system is on, the autowiper sensitivity setting adjusts the wiper speed according to the moisture on the windshield only . Use the wiper lever to wipe the windshield on-demand.
When you switch on the front wipers and move the gearshift lever to reverse (R), rear intermittent wipe automatically turns on. R ear Window W asher E167407 Push the lever away from you to operate the rear window washer . When you release the lever , wiping continues for a short period of time.
GENERAL INFORMATION Condensation in Lamp Assemblies Exterior lamps have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold.
High Beams E162679 Push the lever forward to switch the high beams on. Push the lever forward again or pull the lever toward you to switch the high beams off . Headlamp Flasher E162680 Pull the lever toward you slightly and release it to flash the headlamps.
The headlamps remain on for a period of time after you switch the ignition off . Use the information display controls to adjust the period of time that the headlamps remain on.
HEADLAMP EXIT DELAY After you switch the ignition off , you can switch the headlamps on by pulling the direction indicator lever toward you. Y ou will hear a short tone. The headlamps will switch off automatically after three minutes with any door open or 30 seconds after the last door has been closed.
When switched off in the information display , the daytime running lamps are off in all lighting control switch positions. AUT OMATIC HIGH BEAM CONTROL (If Equipped) The system will automatically turn on your high beams if it is dark enough and no other traffic is present.
E142451 Switch the lighting control to the autolamps position. Manually Overriding the System E169254 When the automatic control has activated the high beams, pushing or pulling the stalk will provide a temporary override to low beam.
E142451 Note: There may be a delay of up to five seconds before the system will operate when the vehicle is first driven. Note: The system is only active at speeds above 3 mph (5 km/h). When the vehicle is started, the lamps track to a predetermined position, then back to center to alert the driver that the system is working properly .
Front Interior Lamp Note: The front interior lamp buttons are on the overhead console. The ex act location of each button on the overhead console depends upon which roof , moonroof , and window shade features are equipped on the vehicle. Note: Press the button to switch the door function off when you open any door .
R ear Interior Lamp (If Equipped) T ype 1 E169470 T ype 2 E199026 T ype 3 E199027 Y ou can switch dome lamps on by pressing the button. AMBIENT LIGHTING (If Equipped) The ambient lighting system is adjusted with the touchscreen system. See MyLincoln T ouch ™ (page 392).
POWER WINDO WS W ARNINGS Do not leave children unattended in your vehicle and do not let them play with the power windows. They may seriously injure themselves. When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the pro ximity of the window openings.
Window Lock E144072 Press the control to lock or unlock the rear window controls. It will illuminate when you lock the rear window controls. Accessory Delay Y ou can use the window switches for several minutes after you switch the ignition off or until you open either front door .
E144073 Left-hand mirror . A Adjustment control. B Right-hand mirror . C T o adjust your mirrors, switch your vehicle on (with the ignition in accessory mode or the engine running) and then: 1. Select the mirror you want to adjust. The control lights.
Loose Mirror Y ou can manually fold an auto-folding mirror by pulling it toward the door window glass. This may cause the mirror to appear loose and it will need to be re-synchronized. Press the control to fold the mirrors in until the movement stops.
A B C E138665 The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A).
SUN VISORS E138666 R otate the sun visor toward the side window and extend it rearward for extra shade. Illuminated V anity Mirror E162197 Lift the cover to switch the lamp on. MOONROOF (If Equipped) W ARNINGS Do not let children play with the moonroof or leave them unattended in the vehicle.
Opening and Closing the Moonroof E191272 Moonroof open. Press and release to open the moonroof . The moonroof stops short of the fully opened position. Press and release the control again to open the moonroof fully . A Moonroof vent. Press and release to vent the moonroof .
GAUGES E152749 T achometer A Information display B 107 MKX (CD9) Canada/United States of America, enUSA, ASO/OGC R eview I nstrument Cluster.
Speedometer C Fuel gauge D Engine coolant temperature gauge E Information Display Odometer Located in the bottom of the information display . Registers the accumulated distance your vehicle has traveled. T rip Computer See General Information (page 114).
Engine Coolant T emperature Gauge Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature ex ceeds the normal range, stop the vehicle as soon as safely possible, switch off the engine and let the engine cool.
Battery If it illuminates while driving, it indicates a malfunction. Switch off all unnecessary electrical equipment and have the system checked by an authorized dealer immediately . Blind Spot Monitor (If Equipped) E151262 It illuminates when you switch this feature off or in conjunction with a message.
Engine Oil If it illuminates with the engine running or when you are driving, this indicates a malfunction. Stop your vehicle as soon as it is safe to do so and switch the engine off . Check the engine oil level. See Engine Oil Check (page 308). Note: Do not resume your journey if it illuminates despite the level being correct.
Low W asher Fluid E132353 It illuminates when the windshield washer fluid is low . Parking L amps It illuminates when you switch the parking lamps on. Powertrain Fault Illuminates when the system detects a powertrain or an AWD fault. Contact an authorized dealer as soon as possible.
Stability Control Off It illuminates when you switch the system off . It goes out when you switch the system back on or when you switch the ignition off .
GENERAL INFORMATION W ARNING Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
T rip 1 & 2 T rip Timer T rip Odometer Average Fuel Economy Digital Speedometer Press and hold OK to reset the currently displayed trip information. • T rip Timer — Timer stops when you switch off the vehicle and restarts when you restart the vehicle.
Fuel Economy Instant Fuel Economy Fuel History Average Speed • Instant Fuel Economy - Shows a visual graph of your instantaneous fuel economy since the function was last reset. • Fuel History - Shows a bar chart of your fuel history . • Average Speed - Displays the average speed you have driven.
Driver Assist Adaptive or Normal Cruise Control Driver Alert - Check enabled or uncheck disabled Driver Alert Driver Alert Display Intelligent AWD Alert, Aid or Both Mode Lane K eeping Sys High, Normal or Low Intensity High, Normal or Low Alert Sensitivity Pre-Collision Dist.
Tire Pressure E200335 The low tire pressure warning light will turn on if the tire pressure is significantly low . Once the light is illuminated, your tires are under-inflated and need to be inflated to the manufacturer ’ s recommended tire pressure.
Settings Select time interval Autolamp Delay Daytime Lights - check enabled or uncheck disabled W elcome Lighting - check enabled or uncheck disabled Autounlock - check enabled or uncheck disabled Loc.
Settings System - check enabled or uncheck disabled Seatbelts R emote Open/Close - check enabled or uncheck disabled Windows Courtesy Wipe - check enabled or uncheck disabled Wipers Rain Sensing - che.
Settings psi, kPa or BAR Tire Pressure Choose your applicable setting Language Speedometer in km/h - check enabled or uncheck disabled Note: Some MyK ey items only appear if a MyK ey is set. INFORMATION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages display or are available.
Adaptive Cruise Control Action Message Displayed when a radar malfunction is preventing the ACC from engaging. See Using Adaptive Cruise Control (page 224). Adaptive Cruise Malfunction Displayed when conditions exist such that the adaptive cruise cannot function properly .
Advance T rac ™ Action Message Displays when the system detects a malfunction due to a blocked sensor . Service Advance T rac Displayed when the traction control has been disabled or enabled by the driver . Advance T rac Off On Airbag Action Message Displays when the system detects a malfunction due to a blocked sensor .
Automatic Engine Shutdown Action Message Displays when the engine is getting ready to shut off . Engine Shuts Off in XX Seconds Displays when the engine has shut off to help increase fuel economy . Engine Shut Off for Fuel Economy Displays when the engine is getting ready to shut off .
Battery and Charging System Action Message Displayed when the charging system needs servicing. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible. Check Charging System Displayed when the battery management system detects an extended low-voltage condition.
Blind Spot Information and Cross T raffic Alert System Action Message Displayed when a fault with the system has occurred. Contact an authorized dealer as soon as possible. Blindspot System Fault Displayed when the system sensors are blocked. Contact an authorized dealer as soon as possible.
Collision W arning S ystem Action Message Displayed when there is a system malfunction with the collision warning system. The system is disabled. Contact an authorized dealer as soon as possible.
Action Message Displays when the hood is not completely closed. Hood Ajar Displays when the door switches have been disabled. Switches Inhibited Security Mode Displays the factory keypad code after the keypad has been reset. See K eyless Entry (page 76).
Hill Start Assist Action Message Displays when hill start assist is not available. Contact an authorized dealer . Hill Start Assist Not Available K eys and Intelligent Access Action Message Displayed as a reminder to press the brake while starting the vehicle.
Action Message Displayed during spare key programming when the maximum number of keys have been programmed. Max Number of K eys Learned Displayed during spare key programming when not enough keys have been programmed. Not Enough K eys Learned Displays when the key battery is low .
Maintenance Action Message Stop the vehicle as soon as safely possible, turn off the engine . Check the oil level. If the warning stays on or continues to come on with your engine running, contact an authorized dealer as soon as possible. L OW Engine Oil Pressure Displayed when the engine oil life remaining is 10% or less.
MyK ey Action Message Displayed during key programming when MyK ey cannot be programmed. MyK ey Not Created Displays when MyK ey is active. MyK ey Active Drive Safely Displays when starting the vehicle and MyK ey is in use and the MyK ey speed limit is on.
Park Aid Action Message Displays when the system has detected a condition that requires service. Contact an authorized dealer . See Front Parking Aid (page 206). Check Front Park Aid Displays when the system has detected a condition that requires service.
Action Message Displays when the electric parking brake is set but has not been released. Park Brake Use Switch to R elease Displays when the electric parking brake is set but has not been released and the vehicle is moving.
R emote Start Action Message Displays as a reminder to apply the brake and push the gear shift button to drive the vehicle after a remote start. T o Drive: Press Brake and Gear Shift Button Seats Action Message Displays as a reminder that memory seats are not available while driving.
Tire Pressure Monitoring System Action Message Displays when one or more tires on your vehicle have low tire pressure. See Tire Pressure Monitoring System (page 359). L OW Tire Pressure Displays when the tire pressure monitoring system is malfunctioning.
T ransmission Action Message See an authorized dealer . T ransmission Malfunction Service Now The transmission is overheating and needs to cool. Stop in a safe place as soon as it ’ s possible. T ransmission Overheating Stop Safely The transmission has overheated and needs to cool.
Action Message Displays when the brake pedal needs to be depressed. Press Brake Pedal Displays when the brake pedal needs to be depressed to enable the transmission to shift from park. Depress Brake to Shift from Park Displays when the neutral button N needs to be pressed again to enter neutral hold.
Action Message See an authorized dealer . SHIFT SY S F AUL T Neutral Unavailable Service R equired See an authorized dealer . SHIFT SY S F AUL T Sport Unavailable Service R equired Displays when neutral tow is active and the ignition needs to be turned off .
AUT OMATIC CLIMATE CONTROL Note: Y ou can switch temperature units between Fahrenheit and Celsius. See General Information (page 114). E171369 140 MKX (CD9) Canada/United States of America, enUSA, ASO.
Left-hand temperature control: Adjust the temperature setting using the control on the left-hand side. This control also adjusts the right-hand side temperature when you switch off dual zone mode. A Fan speed control: Adjust the volume of air circulated in the vehicle.
Defrost: Select to distribute air through the windshield air vents. Air distribution to the instrument panel and footwell vents turns off . Y ou can also use this setting to defrost and clear the windshield of a thin covering of ice. L Heated rear window: Press the button to switch the heated rear window on and off .
Cooling the Interior Quickly 1. Select the MAX A/C function. R ecommended Settings for Cooling 1. Select the AUTO function. 2. Adjust the temperature function to the desired setting. Use 72°F (22°C) as a starting point, then adjust the setting as necessary .
Note: Make sure you have a cabin air filter installed at all times. This prevents foreign objects from entering the system. Running the system without a filter in place could result in degradation or damage to the system. R eplace the filter at regular intervals.
SITTING IN THE CORRECT POSITION W ARNINGS Sitting improperly , out of position or with the seatback reclined too far can take weight off the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in the event of a crash.
W ARNINGS The head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied. Failure to adjust the head restraint properly could reduce its effectiveness during certain impacts. Install the head restraint properly to help minimize the risk of neck injury in the event of a crash.
R ear seat outboard head restraints E162605 The rear outboard head restraints consist of: An energy absorbing head restraint. A T wo steel stems. B Guide sleeve unlock and remove button. C Fold button. D R emoving the Head R estraint 1. Press and hold both C buttons.
Installing the Head R estraint Align the steel stems into the guide sleeves and push the head restraint down until it locks. Power Front Head R estraint (If Equipped) E196925 Tilting Manual Head R estraints (If equipped) The front seat head restraints tilt for extra comfort.
E200942 149 MKX (CD9) Canada/United States of America, enUSA, ASO/OGC R eview S eats.
Power Lumbar (If Equipped) E165608 Adjusting the Length of the Seat Cushion (If equipped) E196924 Adjusting the Upper Seatback and Head R estraint (If equipped) E200950 Multi-Contour Front Seats With Active Motion (If Equipped) Note: The massage system will turn off after 20 minutes.
Lumbar and bolster mode Massage mode Upper lumbar Back massage intensity adjustment A Lumbar decrease Massage intensity decrease and off * B Lower lumbar ** Cushion massage intensity adjustment C Lumb.
W ARNINGS Do not use the memory function when your vehicle is moving. This feature automatically recalls the position of the following: • Driver seat. • Power mirrors. • Power adjustable foot pedals. • Optional power steering column. The memory control is located on the driver door .
1. With the ignition on, move the memory positions to the desired positions. 2. Press and hold the desired preset button for about five seconds. A tone will sound after about two seconds. Continue holding until a second tone is heard. 3. Within three seconds, press the lock button on the remote control you are linking.
The controls are located on the left-hand rear quarter trim panel (accessible from the liftgate area). E187106 Folding the Seatback Press and hold the left control to lower the left seatback. Press and hold the right control to lower the right seatback.
R ear Seats (If Equipped) W ARNING Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaustion, or other physical conditions, must ex ercise care when using the seat heater .
W ARNING Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaustion, or other physical conditions, must ex ercise care when using the seat heater . The seat heater may cause burns even at low temperatures, especially if used for long periods of time.
REAR SEAT ARMREST E201901 Fold the armrest down to use the armrest and cupholders. The cupholders are located inside the rear seat armrest. T o open the cupholders, push the plastic panel on the front edge of the armrest. The cupholders will open. Push the panel again to close the cupholders.
HomeLink Wireless Control System W ARNINGS Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. Do not use the system with any garage door opener that does not have the safety stop and reverse feature as required by U .
E142658 1. With your vehicle parked outside of the garage, turn your ignition to the on position, but do not start your vehicle. 2. Hold your hand-held garage door transmitter 2 – 6 in (5 – 14 cm) away from the HomeLink button you want to program.
3. Press and hold the function button you want to program for 2 seconds, then release. R epeat this step. Depending on your brand of garage door opener , you may need to repeat this sequence a third time.
B A E142661 R ed indicator light A. Green indicator light B. 1. Press and hold one of the buttons on the hand-held transmitter for 10 seconds. The indicator light will change from green to red and green. 2. Press the same button twice to confirm the change to programming mode.
4. Press and release the Genie Intellicode 2 hand-held transmitter ’ s previously programmed button. Both indicator lights on the garage door opener motor unit should now flash purple. 5. Press and hold the previously programmed button on the visor for 2 seconds.
12 V olt DC Power Point W ARNINGS Do not plug optional electrical accessories into the cigar lighter socket. Incorrect use of the cigar lighter can cause damage not covered by the vehicle warranty , and can result in fire or serious injury . Do not use a power point for operating a cigar lighter .
E193395 Note: Depending on your vehicle, the power point cover may open to the right or upward. When the indicator light on the power point is: • On: The power point is working, the ignition is on and a device is plugged in. • Off: The power point is off , the ignition is off or no device is plugged in.
GL OVE BO X E199447 Y ou can open the glove box by pressing the button located on the instrument panel. Note: The electronic glove bo x will not function if the vehicle battery is dead, or if you switch the ignition off and lock the vehicle. Manual Entry E206107 1.
R ear auxiliary power point cover . D Auxiliary power point or cigar lighter (if equipped). E Auxiliary power point. F R ear climate controls (if equipped). G USB port. H Cupholders or cupholders with cover (if equipped). I OVERHEAD CONSOLE E75193 Press near the rear edge of the door to open it.
GENERAL INFORMATION W ARNINGS Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. Do not park, idle or drive your vehicle on dry grass or other dry ground cover .
• Press the brake pedal, and then press the button for any length of time. An indicator light on the button illuminates when then ignition is on and when the engine starts. ST ARTING A GASOLINE ENGINE When you start the engine, the idle speed increases.
E203693 1 1. Open the floor console storage compartment lid. E203694 2 2. With the buttons facing the rear of your vehicle and the key ring up, place the intelligent access key into the backup slot. 3. With the key in this position, press the brake pedal then the push button ignition switch to switch the ignition on and start your vehicle.
4. K eep the accelerator pedal fully depressed and press the push button ignition switch until the engine starts. Automatic Engine Shutdown This feature automatically shuts down the engine if it has been idling for an extended period. The ignition also turns off to save battery power .
Guarding Against Exhaust Fumes W ARNING If you smell exhaust fumes inside your vehicle, have your vehicle checked by your authorized dealer immediately . Do not drive your vehicle if you smell exhaust fumes. Carbon mono xide is present in exhaust fumes.
• Check for heat anywhere in the electrical hookup once the system has been operating for appro ximately 30 minutes. • Make sure the system is unplugged and properly stowed before starting and driving your vehicle. Make sure the protective cover seals the prongs of the block heater cord plug when not in use.
SAFETY PRECAUTIONS W ARNINGS Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door (Easy Fuel capless fuel system), do not refuel until the sound stops.
• Fuels can also be harmful if absorbed through the skin. If fuel is splashed on the skin, clothing or both, promptly remove contaminated clothing and wash skin thoroughly with soap and water . R epeated or prolonged skin contact with fuel liquid or vapor causes skin irritation.
Do not be concerned if the engine sometimes knocks lightly . However , if it knocks heavily under most driving conditions while you are using fuel with the recommended octane rating, contact an authorized dealer to prevent any engine damage. FUEL FILLER FUNNEL L OCATION The fuel filler funnel is located in the spare wheel storage tray .
1. Fully open the fuel tank filler door until it engages and remove the fuel tank filler cap. Note: Capless fuel systems do not have a fuel tank filler cap. 2. Fully insert the plastic funnel into the fuel tank filler pipe opening. E157452 3. Add fuel to your vehicle from the fuel container .
Easy Fuel ™ Capless Fuel System W ARNING The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door , do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury . When fueling your vehicle: 1.
5. T o close the fuel filler door , press the center-rear edge of the fuel filler door and then release. The fuel door will latch closed. If the fuel fill inlet did not close properly , a Check Fuel Fill Inlet message may appear on the instrument cluster .
Calculating Fuel Economy Do not measure fuel economy during the first 1000 miles (1600 kilometers) of driving (this is your engine ’ s break-in period); a more accurate measurement is obtained after 2000 miles - 3000 miles (3200 kilometers - 4800 kilometers).
Y our vehicle is equipped with various emission control components and a catalytic converter that will enable your vehicle to comply with applicable exhaust emission standards. T o make sure that the catalytic converter and other emission control components continue to work properly: • Use only the specified fuel listed.
Y ou can correct these temporary malfunctions by filling the fuel tank with good quality fuel, properly closing the fuel fill inlet or letting the electrical system dry out. After three driving cycles without these or any other temporary malfunctions present, the service engine soon indicator should stay off the next time you start the engine.
AUT OMATIC TRANSMISSION W ARNINGS Always set the parking brake fully and make sure your vehicle is in park (P). T urn the ignition off and remove the key whenever you leave your vehicle. Do not apply the brake pedal and accelerator pedal simultaneously .
Note: T o put your vehicle in gear with the door open, perform steps 1-4. See the Automatic R eturn to Park section in this chapter for more information on this feature. Park (P) With the transmission in park (P), your vehicle locks the transmission and prevents the wheels from turning.
A message will appear in your information display screen when your vehicle has entered Stay in Neutral mode. Note: During this mode the N button will flash continuously and your instrument cluster will display N as the selected gear . Exiting Stay in Neutral mode T o disable Stay in Neutral mode select another gear .
Upshifts when accelerating (recommended for best fuel economy) mph (km/h) Gear Upshift T o From 15 mph (24 km/h) 2 1 25 mph (40 km/h) 3 2 40 mph (64 km/h) 4 3 45 mph (72 km/h) 5 4 50 mph (80 km/h) 6 5 The instrument cluster will display your currently selected gear .
W ARNINGS When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely . T o avoid unwanted vehicle movement, always fully set the parking brake prior to doing this procedure. Use wheel chocks if appropriate.
If Y our V ehicle Gets Stuck In Mud or Snow Note: Do not rock your vehicle if your engine is not at normal operating temperature or damage to your transmission may occur . Note: Do not rock your vehicle for more than a minute or damage to your transmission and tires may occur , or your engine may overheat.
USING ALL- WHEEL DRIVE All-wheel drive uses all four wheels to power the vehicle. This increases traction, enabling you to drive over terrain and road conditions that a conventional two-wheel drive vehicle cannot. The AWD system is active all the time and requires no input from the operator .
If Y our V ehicle Goes Off the Edge of the Pavement • If your vehicle goes off the edge of the pavement, slow down, but avoid severe brake application, ease the vehicle back onto the pavement only after reducing your speed. Do not turn the steering wheel too sharply while returning to the road surface.
steering, acceleration or braking which could result in an increased risk of loss of vehicle control, vehicle rollover and/or personal injury . Use all available road surface to return the vehicle to a safe direction of travel. • In the event of an emergency stop, avoid skidding the tires and do not attempt any sharp steering wheel movements.
After driving through mud, clean off residue stuck to rotating driveshafts and tires. Ex cess mud stuck on tires and rotating driveshafts causes an imbalance that could damage drive components. Note: Driving through deep water may damage the transmission.
Driving on Snow and Ice W ARNING If you are driving in slippery conditions that require tire chains or cables, then it is critical that you drive cautiously . Keep speeds down, allow for longer stopping distances and avoid aggressive steering to reduce the chances of a loss of vehicle control which can lead to serious injury or death.
Failure to maintain your vehicle properly may void the warranty , increase your repair cost, reduce vehicle performance and operational capabilities and adversely affect driver and passenger safety . Frequent inspection of vehicle chassis components is recommended if the vehicle is subjected to off-highway usage.
GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn-out.
The anti-lock braking system will not eliminate the risks when: • Y ou drive too closely to the vehicle in front of you. • Y our vehicle is hydroplaning. • Y ou take corners too fast. • The road surface is poor . ELECTRIC P ARKING BRAKE The electric parking brake replaces the conventional handbrake.
The brake system warning lamp flashes for appro ximately 2 seconds then stays illuminated to confirm that the electric parking brake has been applied. See Information Displays (page 114).
Automatic release - drive away release Y our vehicle will automatically release the parking brake if all of the following conditions exist: • The driver door is closed. • The accelerator pedal is pressed. • There are no faults detected in the parking brake system.
Auto Hold is a feature that uses your vehicle' s brake to hold your vehicle at a stop once your vehicle has reached a standstill condition. For example, Auto Hold can assist you while stopping at traffic lights or while in traffic jams by holding the brake pressure for you once you bring your vehicle to a stop.
2. R elease the brake pedal. The Auto Hold (ACTIVE) indicator light remains illuminated in the information display and Auto Hold will hold your vehicle at a stop. 3. When you press the accelerator pedal, Auto Hold will release the brakes and you will be able to drive off .
PRINCIPLE OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time.
The stability and traction control off light temporarily illuminates on engine start-up and stays on: • When you turn the traction control system off .
PRINCIPLE OF OPERATION W ARNINGS V ehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel and tire size may change the handling characteristics of your vehicle and may adversely affect the performance of the electronic stability control system.
Curve Control The system enhances your vehicle ’ s ability to follow the road when cornering severely or avoiding objects in the roadway . Curve Control operates by reducing engine power and, if necessary , applying brakes to one or more of the wheels individually .
T raction Control The system enhances your vehicle ’ s ability to maintain traction of the wheels by detecting and controlling wheel spin. See Using T raction Control (page 200). E72903 A A A B B B B V ehicle without stability control skidding off its intended route.
PRINCIPLE OF OPERATION W ARNINGS T o help avoid personal injury , please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fix ed) objects when moving on a flat surface at parking speeds.
REAR P ARKING AID The rear sensors are only active when the transmission is in reverse (R). As your vehicle moves closer to the obstacle, the rate of the audible warning increases. When the obstacle is less than 12 in (30 cm) away , the warning sounds continuously .
E187330 Coverage area of up to 28 in (70 cm) from the front bumper . The coverage area decreases at the outer corners. When your vehicle approaches an object, a warning tone sounds. When your vehicle moves closer to an object, the warning tone repeat rate increases.
E187810 Coverage area is up to 24 in (60 cm) from the sides of your vehicle. When the system detects an object close to the side of your vehicle, an audible warning sounds. As the object comes closer to the side of your vehicle, the rate of the audible warning increases.
Note: If the obstacle remains within 12 in (30 cm) visual distance indication remains on. If the transmission is in neutral (N), the side sensing system only provides visual distance indication when your vehicle is moving at 7 mph (12 km/h) or below , for example when moving on a slope, and obstacles are detected within 12 in (30 cm).
Note: The Blind Spot Information System does not detect traffic alongside or behind your vehicle during a park assist maneuver . The system may not correctly operate in any of the following conditions: • Y ou use a spare tire or a tire significantly worn more than the other tires.
A E130107 Note: If the direction indicators are not used, the system defaults to the passenger side of your vehicle. Note: The system passively searches for parking spaces prior to pressing the button, so activating the system is still possible while passing a parking space.
.
E186193 When the system finds a suitable space, it displays a message and a tone sounds. Stop your vehicle and follow the instructions on the screen. If your vehicle is moving very slowly , you may need to pull forward a short distance before the system is ready to park.
When you think your vehicle is properly parked, or you hear a solid tone from the parking aid (accompanied by a display message and a chime), bring your vehicle to a complete stop. When automatic steering is complete, the system displays a message and a tone sounds, indicating that the active park assist process is finished.
Note: If the clearance in front of your vehicle allows easy departure, the Park Out Assist feature might not be available. Note: Y ou are responsible for controlling your vehicle and making sure the path is clear prior to pulling into traffic.
The system does not offer a particular space The sensors may be covered (for example, snow , ice or dirt buildup). Covered senors can affect the system's functionality . There is not enough room in the parking space for your vehicle to safely park.
The system does not position the vehicle where I want in the space A parked vehicle has a high attachment (salt sprayer , snowplow or moving truck bed).
Note: The reverse sensing system is not effective at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects. The system uses three types of guides to help you see what is behind your vehicle: • Active guidelines: Show the intended path of your vehicle when reversing.
Fix ed guideline: Y ellow zone D Fix ed guideline: R ed zone E R ear bumper F Active guidelines are only shown with fix ed guidelines. T o use active guidelines, turn the steering wheel to point the guidelines toward an intended path.
The default setting for the rear camera delay is OFF . When shifting the transmission out of reverse (R) and into any gear other than park (P), the camera image remains in the display until: • Y our vehicle speed sufficiently increases. • Y ou shift your vehicle into park (P).
• Front 360 + Normal: Contains the normal front camera view next to a 360 degree camera view . This view will appear on the screen when the button is pressed in any gear other than reverse (R). • Front Normal View: Provides an image of what is directly in front of your vehicle.
The front video camera, located behind the star emblem on the grille, provides a video image of the area in front of your vehicle. It adds assistance to the driver while driving forward at low speeds. T o use the front video camera system, place the transmission in any gear ex cept reverse (R).
PRINCIPLE OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. Y ou can use cruise control when your vehicle speed is greater than 20 mph (30 km/h). USING CRUISE CONTROL W ARNINGS Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery .
Canceling the Set Speed Press and release CNCL or tap the brake pedal. The set speed does not erase. R esuming the Set Speed Press and release RES . Switching Cruise Control Off Press and release OFF when the system is in stand by mode or switch the ignition off .
The current gap setting and SET also display . Setting a Speed 1. Accelerate to the desired speed. 2. Press and release SET+ . The vehicle speed is stored in the memory . 3. The information display shows a green indicator light, current gap setting and desired set speed.
Setting the Gap Distance Note: It is your responsibility to select a gap appropriate to the driving conditions. E195439 A B Gap decrease. A Gap increase. B Y ou can decrease or increase the distance between your vehicle and the vehicle in front of you by pressing the gap control.
Each time you start the vehicle, the system selects the last chosen gap for the current driver . Disengaging the System Press the brake pedal or press and release CNCL .
Switching the System Off Press and release OFF when the system is in stand by mode or switch the ignition off . Note: The set speed memory erases when you switch off the system. Detection Issues W ARNING On rare occasions, detection issues can occur due to the road infrastructures, for example bridges, tunnels and safety barriers.
System Not Available Conditions that can cause the system to deactivate or prevent the system from activating when requested include: • A blocked sensor . • High brake temperature. • A failure in the system or a related system. Blocked Sensor W ARNINGS Do not use the system when towing a trailer with brake controls.
Action Cause Clean the grille surface in front of the radar or remove the object causing the obstruction. The surface of the radar in the grille is dirty or obstructed in some way . W ait a short time. It may take several minutes for the radar to detect that it is free from obstruction.
DRIVER ALERT (If Equipped) PRINCIPLE OF OPERATION W ARNING The driver alert system is designed to aid you. It is not intended to replace your attention and judgment. Y ou are still responsible to drive with due care and attention. Note: The system will store the on or off setting in the information display menu through ignition cycles.
The current assessment of your alertness is within a typical range. E131359 The current assessment of your alertness indicates that you should rest as soon as safely possible. The status bar will travel from left to right as the calculated alertness level decreases.
Note: When Aid mode is on and the system detects no steering activity for a short period, the system will alert you to put your hands on the steering wheel.
E165517 Alert A Aid B Alert + Aid – Provides an assistance steering torque input toward the lane center . If your vehicle continues drifting out of the lane, the system provides a steering wheel vibration. Note: The alert and aid diagrams illustrate general zone coverage.
Green: Indicates that the system is available or ready to provide a warning or intervention, on the indicated side(s). Y ellow: Indicates that the system is providing or has just provided a lane keeping aid intervention. R ed: Indicates that the system is providing or has just provided a lane keeping alert warning.
Why is the feature not available (line markings are gray) when I can see the lane markings on the road? Camera blockage due to dirt, grime, fog, frost or water on the windshield Driving too close to t.
BLIND SPO T INFORMATION SY STEM Blind Spot Information System (BLIS ™ ) with Cross T raffic Alert (If Equipped) W ARNING T o help avoid injuries, NEVER use the Blind Spot Information System as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes.
Note: For manual transmission vehicles, the cross traffic alert will be active only if the transmission is in reverse (R). If your vehicle is rolling backward and the transmission is not in reverse (R) then cross traffic alert will not be active.
E142441 Zone coverage also decreases when parking at shallow angles. Here, the left sensor is mostly obstructed; zone coverage on that side is severely limited.
System Lights and Messages E142442 The Blind Spot Information and cross traffic alert systems illuminate a yellow alert indicator in the outside mirror on the side of your vehicle the approaching vehicle is coming from.
The system uses radar sensors which are located behind the bumper fascia on each side of your vehicle. Do not allow mud, snow or bumper stickers to obstruct these areas, this can cause degraded system performance.
False Alerts Note: If your vehicle has a factory equipped tow bar and it is towing a trailer , the sensors will detect the trailer and turn the Blind Spot Information and cross traffic alert systems off to avoid false alerts. For non-factory equipped tow bars, you may want to switch the Blind Spot Information System off manually .
Extreme continuous steering may increase the effort required for you to steer your vehicle. This increased effort prevents overheating and permanent damage to the steering system. Y ou do not lose the ability to steer your vehicle manually . T ypical steering and driving maneuvers allow the system to cool and return to normal operation.
W ARNINGS System performance may reduce in situations where the camera' s detection capability is limited. These situations include but are not limited to direct or low sunlight, vehicles at nigh.
Note: If you perceive Pre-Collision Assist alerts as being too frequent or disturbing, then you can reduce the alert sensitivity , though the manufacturer recommends using the highest sensitivity setting where possible. Setting lower sensitivity would lead to fewer and later system warnings.
Action Cause The Pre-Collision Assist system is temporarily disabled. Pre-Collision Assist should automatically reactivate a short time after the weather conditions improve. Swirling water , or snow or ice on the surface of the road may interfere with the radar signals.
preset your preferences for these systems within the information display . Lincoln Drive Control will respond to your preferences based on what gear position you select. This provides a single location to control multiple systems performance settings.
Y ou can change your vehicle ’ s Drive Control settings from the main menu on the information display: Settings Drive Control V ehicle Note: Not all settings may be available. Note: Lincoln Drive Control has diagnostic checks that continuously monitor the system to ensure proper operation.
REAR UNDER FL OOR ST ORAGE Cargo Management System E201718 The system is located in the floor of the cargo area. Lift the handle to open. High series E201719 The high series has an additional cover that can be removed to access the spare tire or tire mobility kit.
The cargo net secures lightweight objects in the cargo area. Attach the net to the anchors provided. R epeat the attachment on both sides of the vehicle. E199571 L UGGAGE CO VERS (If Equipped) W ARNINGS Make sure that the posts are correctly latched in mounting features.
ROOF RACKS AND L O AD CARRIERS (If Equipped) W ARNING When loading the roof racks, we recommend you evenly distribute the load, as well as maintain a low center of gravity . Loaded vehicles, with higher centers of gravity , may handle differently than unloaded vehicles.
E143816 P A YLOAD Payload - is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be found on the Tire Label on the B-Pillar or the edge of the driver door (vehicles exported outside the US and Canada may not have a Tire Label).
Example only: E142516 E142517 253 MKX (CD9) Canada/United States of America, enUSA, ASO/OGC R eview L oad Carrying.
E143817 CARGO Cargo W eight - includes all weight added to the Base Curb W eight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight. GAW (Gross Axle W eight) - is the total weight placed on each axle (front and rear) including vehicle curb weight and all payload.
E143818 GVW GVW (Gross V ehicle Weight) - is the V ehicle Curb W eight, plus cargo, plus passengers. GVWR (Gross V ehicle Weight R ating) - is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo).
Example only: E142523 256 MKX (CD9) Canada/United States of America, enUSA, ASO/OGC R eview L oad Carrying.
E142524 W ARNING Ex ceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury .
E143819 GCW GVW GCW (Gross Combined W eight) - is the Gross V ehicle W eight plus the weight of the fully loaded trailer . GCWR (Gross Combined W eight Rating) - is the maximum allowable weight of the vehicle and the loaded trailer , including all cargo and passengers, that the vehicle can handle without risking damage.
W ARNINGS Do not ex ceed the GVWR or the GAWR specified on the Safety Compliance Certification Label. Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle ’ s GVWR and GAWR limitations.
*Suppose your vehicle has a 1400-pound (635-kilogram) cargo and luggage capacity . Y ou and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past two years.
T OWING A TRAILER W ARNINGS Do not ex ceed the GVWR or the GAWR specified on the certification label. T owing trailers beyond the maximum recommended gross trailer weight ex ceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury .
RV & T railer T owing Guide Online http://www . fleet. ford.com/towing-guides/ W ebsite TRAILER SW AY CONTROL (If Equipped) W ARNING T urning off trailer sway control increases the risk of loss of vehicle control, serious injury or death.
Y our vehicle may tow a trailer provided the maximum trailer weight is less than or equal to the maximum trailer weight listed for your vehicle configuration on the following chart. Maximum trailer weight 1 Powertrain 2, 000 lb (907 kg) 2. 7L GTDI 2 3,500 lb (1,587 kg) 2.
ESSENTIAL T OWING CHECKS Follow these guidelines for safe towing: • Do not tow a trailer until you drive your vehicle at least 1000 miles (1600 kilometers). • Consult your local motor vehicle laws for towing a trailer . • See the instructions included with towing accessories for the proper installation and adjustment specifications.
Before T owing a T railer Practice turning, stopping and backing up to get the feel of your vehicle-trailer combination before starting on a trip. When turning, make wider turns so the trailer wheels clear curbs and other obstacles. When T owing a T railer • Do not drive faster than 70 mph (113 km/h) during the first 500 miles (800 kilometers).
Any time the rear axle submerges in water , replace the rear axle lubricant. W ater may contaminate the rear axle lubricant, which is not a normal maintenance inspection item unless there is a possibility of a leak or other axle repair is required.
Front-wheel drive vehicles must have the front wheels placed on a tow dolly when towing your vehicle from the rear using wheel lift equipment. This prevents damage to the transmission. T owing an all-wheel drive vehicle requires that all wheels be off the ground, such as using a wheel lift and dollies or flatbed equipment.
2. Select Neutral T ow under the V ehicle Settings menu in the information display . See General Information (page 114). 3. Press and hold the OK button to start the neutral tow process. 4. Press the brake pedal and select N on the push-button transmission.
BREAKING-IN Y ou need to break in new tires for appro ximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unusual driving characteristics. Avoid driving too fast during the first 1000 miles (1600 kilometers). V ary your speed frequently and change up through the gears early .
• Use the recommended engine oil. • Perform all regularly scheduled maintenance. There are also some things you may want to avoid doing because they reduce your fuel economy: • Avoid sudden or hard accelerations. • Avoid revving the engine before turning off the car .
FL OOR MATS W ARNINGS Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
RO ADSIDE ASSIST ANCE V ehicles Sold In the United States: Getting R oadside Assistance If you ever need help on the road, the Lincoln Motor Company is there for you with nationwide, 24-hours-a-day , seven-days-a-week assistance. The service is available: • Throughout the life of the vehicle for original owners.
V ehicles Sold In Canada: Getting R oadside Assistance Canadian clients who require roadside assistance, call 1-800-387-9333. Sykes Assistance Services Corporation administers the R oadside Assistance program. Y ou must receive covered services in Canada or the continental United States.
Should your vehicle shut off after a collision, you may restart your vehicle. For vehicles equipped with a key system: 1. Switch off the ignition. 2. Switch on the ignition. 3. R epeat Steps 1 and 2 to re-enable the fuel pump. For vehicles equipped with a push button start system: 1.
Park the booster vehicle close to the hood of the disabled vehicle, making sure the two vehicles do not touch. Connecting the Jumper Cables W ARNINGS Do not attach the cables to fuel lines, engine rocker covers, the intake manifold or electrical components as grounding points.
R emoving the Jumper Cables R emove the jumper cables in the reverse order that they were connected. 4 1 3 2 E142665 1. R emove the negative (-) jumper cable from the disabled vehicle. 2. R emove the jumper cable on the negative (-) terminal of the booster vehicle battery .
GETTING THE SERVICES Y OU NEED W arranty repairs to your vehicle must be performed by an authorized dealer . While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction.
T witter French @LincolnQC Instagram @LincolnMotorCA Facebook /LincolnMotorCA Additional Assistance If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1. Contact your Sales R epresentative or Service Advisor at your selling/servicing authorized dealer .
2. Four or more repair attempts are made on the same nonconformity (a defect or condition that substantially impairs the use, value or safety of the vehicle) OR 3. The vehicle is out of service for repair of nonconformities for a total of more than 30 calendar days (not necessarily all at one time).
to resolve them. A Customer Claim Form will be mailed that will need to be completed, signed and returned to the BBB along with proof of ownership. Upon receipt, the BBB will review the claim for eligibility under the Program Summary Guidelines.
If you cannot find unleaded fuel or can only get fuel with an anti-knock index lower than is recommended for your vehicle, contact our Customer R elationship Center . The use of leaded fuel in your vehicle without proper conversion may damage the effectiveness of your emission control system and may cause engine knocking or serious engine damage.
F AX: +971 4 3327266 Email: menacac@ford.com www .me. ford.com If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Motor Company Export Operations & Global Growth Initiatives by emailing expcac@ford.
T o contact NHTSA, you may call the V ehicle Safety Hotline toll-free at 1-888-327-4236 (TTY : 1-800-424-9153); go to http://www .safercar .gov; or write to: Administrator 1200 New Jersey Avenue, Southeast W ashington, D .C. 20590 Y ou can also obtain other information about motor vehicle safety from http://www .
FUSE SPECIFICATION CHART Power Distribution Bo x W ARNINGS Always disconnect the battery before servicing high-current fuses. W ARNINGS T o reduce risk of electrical shock, always replace the cover to the power distribution bo x before reconnecting the battery or refilling fluid reservoirs.
E190797 285 MKX (CD9) Canada/United States of America, enUSA, ASO/OGC R eview F uses.
Protected Components Fuse Amp Rating Fuse or Relay Number Power fold 2nd row seats. 30A 3 1 Starter relay . — 2 R ear wiper . 15A 1 3 Rain sensor Blower motor relay . — 4 Power point 3 - back of console. 20A 3 5 Not used. — 6 Powertrain control module - vehicle power 1.
Protected Components Fuse Amp Rating Fuse or Relay Number Not used. — 13 Not used. — 14 Run-start relay . — 15 Power point 2 - console bin. 20A 3 16 Power point 4 - luggage compartment. 20A 3 17 RH HID headlamp. 20A 1 18 Run-start electronic power assist steering.
Protected Components Fuse Amp Rating Fuse or Relay Number V oltage quality module (start/stop). Front split view camera. Front split view camera module. Not used (spare). 10A 1 24 Run-start anti-lock brake system. 10A 2 25 Run-start powertrain control module.
Protected Components Fuse Amp Rating Fuse or Relay Number Not used. — 36 Power transfer unit fan. 10A 1 37 Electronic fan 2 relay . — 38 Electric fan 3 relay . — 39 Horn relay . — 40 Not used. — 41 Fuel pump relay . — 42 2nd row easy fold seat release.
Protected Components Fuse Amp Rating Fuse or Relay Number Horn. 20A 1 50 Not used. — 51 Not used. — 52 Not used. — 53 Brake on off switch. 10A 2 54 AL T sensor . 10A 2 55 1 Micro fuse. 2 Dual micro fuse. 3 M-type fuse. Power Distribution Bo x - Bottom There are fuses located on the bottom of the fuse bo x.
E145983 1. R elease the two latches, located on both sides of the fuse bo x. 2. Raise the inboard side of the fuse bo x from the cradle. 3. Move the fuse bo x toward the center of the engine compartment. 4. Pivot the outboard side of the fuse bo x to access the bottom side.
E190798 292 MKX (CD9) Canada/United States of America, enUSA, ASO/OGC R eview F uses.
Protected components Fuse amp rating Fuse or relay number Not used. — 56 Not used. — 57 Fuel pump feed. 30A * 58 Electronic fan 3. 40A ** 59 Electronic fan 1. 40A ** 60 Not used. — 61 Body control module 1. 50A ** 62 Electronic fan 2. 25A * 63 Not used.
Protected components Fuse amp rating Fuse or relay number Heated rear window . 40A * 68 Anti-lock brake system valves. 30A * 69 Passenger seat. 30A * 70 Active front steering. 50A ** 71 T ransmission oil pump (start/stop). 20A * 72 R ear heated seats.
Protected components Fuse amp rating Fuse or relay number Wiper motor 2. 25A * 80 110 volt inverter . 40A * 81 Not used. – 82 TRCM (iShifter). 20A * 83 Starter solenoid. 30A * 84 Vista roof . 30A * 85 Not used. – 86 Anti-lock brake system pump. 60A ** 87 * M-type fuse.
E145984 Protected components Fuse amp rating Fuse or relay number Demand lighting (glove bo x, vanity , dome). 10A 1 1 Battery saver relay coil. 296 MKX (CD9) Canada/United States of America, enUSA, A.
Protected components Fuse amp rating Fuse or relay number Second row easy fold relay coil. Memory seats. 7 .5A 1 2 Lumbar . Power mirrors. Driver seat module logic power . Driver door unlock. 20A 1 3 Not used (spare). 5A 1 4 Subwoofer amplifier . 20A 1 5 USB charger .
Protected components Fuse amp rating Fuse or relay number MyLincoln module. Not used (spare). 5A 2 11 Climate control module. 7 .5A 2 12 Cluster . 7 .5A 2 13 Steering column control module. Smart datalink connector (gateway) module. Not used (spare). 10A 2 14 Datalink power .
Protected components Fuse amp rating Fuse or relay number Humidity and in-car temperature sensor . 5A 2 21 Occupant classification sensor . 5A 2 22 Delayed accessory (power inverter logic, moonroof logic, driver window switch power). 10A 1 23 Heads up display .
Protected components Fuse amp rating Fuse or relay number Amplifier . 20A 1 28 R ear driver side door smart window . 30A 1 29 R ear passenger side door smart window . 30A 1 30 Not used (spare). 15A 1 31 Global positioning system module. 10A 1 32 Centerstack display .
Protected components Fuse amp rating Fuse or relay number Suspension module. Heated steering wheel module (without active front steering). 20A 1 37 R ear power windows. 30A 3 38 R ear window switch illumination. 1 Micro fuse. 2 Dual micro fuse. 3 Circuit breaker .
GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of authorized dealers that are there to help you with their professional servicing expertise. W e believe that their specially trained technicians are best qualified to service your vehicle properly and expertly .
3. R elease the hood latch by pushing the secondary release lever to your left-hand side. E202009 4 4. Open the hood. The hood struts automatically supports the hood. Closing the Hood 1. Lower the hood until it engages on to the secondary latch. 2. Firmly push down on the front of the hood to close it fully .
UNDER HOOD OVER VIEW - 2. 7L ECOBOOST ™ A I E F G H B C D E188730 Engine coolant reservoir . See Engine Coolant Check (page 309). A Brake fluid reservoir . See Brake Fluid Check (page 315). B Battery . See Changing the 12V Battery (page 316). C Power distribution bo x.
Automatic transmission fluid dipstick. See Automatic T ransmission Fluid Check (page 313). F Engine oil dipstick. See Engine Oil Dipstick (page 307). G Engine oil filler cap. See Engine Oil Check (page 308). H Windshield washer fluid reservoir . See Washer Fluid Check (page 315).
UNDER HOOD OVER VIEW - 3. 7L E173333 Engine coolant reservoir . See Engine Coolant Check (page 309). A. Engine oil filler cap. See Engine Oil Check (page 308).
Engine oil dipstick. See Engine Oil Dipstick (page 307). C. Brake fluid reservoir . See Brake Fluid Check (page 315). D. Battery . See Changing the 12V Battery (page 316). E. Power distribution bo x. See Fuses (page 284). F . Air filter assembly . See Changing the Engine Air Filter (page 324).
ENGINE OIL DIPSTICK - 3. 7L E146429 MIN A MAX B ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and the MAX marks. 1. Make sure that your vehicle is on level ground. 2. T urn the engine off and wait 10 minutes for the oil to drain into the oil pan.
3. R emove the engine oil filler cap and use a funnel to pour the engine oil into the opening. 4. Wipe off any spilled oil. 5. R eplace the filler cap. T urn it until you feel a strong resistance. OIL CHANGE INDICAT OR RESET Use the information display controls on the steering wheel to reset the oil change indicator .
Checking the Engine Coolant When the engine is cold, check the concentration and level of the engine coolant at the intervals listed in the scheduled maintenance information. See Scheduled Maintenance (page 499). Note: Make sure that the coolant level is between the MIN and MAX marks on the coolant reservoir .
Do not use the following as a coolant substitute: • Alcohol. • Methanol. • Brine. • Any engine coolant mix ed with alcohol or methanol antifreeze or coolant. Alcohol and other liquids can cause engine damage from overheating or freezing. Do not add extra inhibitors or additives to the coolant.
How Fail-Safe Cooling W orks If the engine begins to overheat, the engine coolant temperature gauge moves to the red (hot) area and: A high engine temperature message appears in the information display . The service engine soon indicator appears in the information display .
AUT OMATIC TRANSMISSION FL UID CHECK W ARNING Do not use supplemental transmission fluid additives, treatments or cleaning agents. The use of these materials may affect transmission operation and result in damage to internal transmission components. The transmission does not consume fluid.
High Fluid Level If the fluid level is above the maximum range (above point A) fluid may need to be removed. High fluid levels may be caused by a overheating condition.
4. Check the fluid level. See Checking the T ransmission Fluid Level . 5. Install in reverse order . Tighten the two air filter assembly securing bolts until you feel a strong resistance. BRAKE FL UID CHECK W ARNINGS Do not use any fluid other than the recommended brake fluid as this will reduce brake efficiency .
State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive. W asher fluids containing non-methanol antifreeze agents should be used only if they provide cold weather protection without damaging the vehicle ’ s paint finish, wiper blades or washer system.
For longer , trouble-free operation, keep the top of the battery clean and dry . Also, make certain the battery cables are always tightly fastened to the battery terminals. If you see any corrosion on the battery or terminals, remove the cables from the terminals and clean with a wire brush.
Note: If you do not allow the engine to relearn the idle and fuel trim strategy , the idle quality of your vehicle may be adversely affected until the engine computer eventually relearns the idle trim and fuel trim strategy . Note: Always dispose of automotive batteries in a responsible manner .
Note: Make sure the windshield is clean before using new wiper blades. See V ehicle Care (page 325). Changing the R ear Window Wiper Blade Note: Do not hold the wiper blade when lifting the wiper arm. Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached.
25 feet (7 .6 meters). C Horizontal reference line. D V ertical Aim Adjustment Procedure 1. Park the vehicle directly in front of a wall or screen on a level surface, appro ximately 25 feet (7 .6 meters) away . 2. Measure the height of the headlamp bulb center from the ground and mark an 8 foot (2.
5. Locate the vertical adjuster on each headlamp. Using a Phillips #2 screwdriver , turn the adjuster either clockwise or counterclockwise in order to adjust the vertical aim of the headlamp. The horizontal edge of the brighter light should touch the horizontal reference line.
BULB SPECIFICATION CHART R eplacement bulbs are specified in the chart below . Headlamp bulbs must be marked with an authorized D.O . T . marking for North America to make sure they have the proper lamp performance, light brightness, light pattern, and safe visibility .
Power (W att) Specification Lamp LED LED R eversing lamps. LED LED License plate lamp. Note: LED lamps are not serviceable. See an authorized dealer if they fail. Interior Lamps Power (W att) Specification Lamp LED LED Interior lamp. LED LED Luggage compartment lamp.
CHANGING THE ENGINE AIR FIL TER W ARNING T o reduce the risk of vehicle damage and/or personal burn injuries do not start your engine with the air cleaner removed and do not remove it while the engine is running. When changing the air filter element, use only the air filter element listed.
GENERAL INFORMATION Y our Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following pr.
Exterior Chrome Parts • Apply a high quality-cleaning product to bumpers and other chrome parts. Follow the manufacturer ’ s instructions. W e recommend Motorcraft Custom Bright Metal Cleaner . • Do not apply the cleaning product to hot surfaces.
CLEANING THE ENGINE Engines are more efficient when they are clean because grease and dirt buildup keep the engine warmer than normal. When washing: • T ake care when using a power washer to clean the engine. The high-pressure fluid could penetrate the sealed parts and cause damage.
CLEANING THE INTERIOR W ARNINGS Do not use cleaning solvents, bleach or dye on the vehicle ’ s safety belts, as these actions may weaken the belt webbing. On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents.
Cleaning Procedure Type of S tain Use lukewarm water and rinse by dabbing with clean water . Fruit juice, jam, jelly , syrup or ketchup. Use cold water and rinse by dabbing with clean water . Avoid warm water because it makes these substances coagulate.
CLEANING THE INSTRUMENT P ANEL AND INSTRUMENT CL USTER LENS W ARNING Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system. Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces.
For routine cleaning, wipe the surface with a soft, damp cloth and a mild soap and water solution. Dry the area with a clean, soft cloth. For cleaning and removing stains such as dye transfer , use Motorcraft Premium Leather and Vinyl Cleaner or a commercially available leather cleaning product for automotive interiors.
• Rinse thoroughly with a strong stream of water when you have completed the cleaning process. • T o remove tar and grease, use Motorcraft Bug and T ar Remover . VEHICLE ST ORAGE If you plan on storing your vehicle for 30 days or more, read the following maintenance recommendations to make sure your vehicle stays in good operating condition.
Cooling system • Protect against freezing temperatures. • When removing your vehicle from storage, check coolant fluid level. Confirm that there are no cooling system leaks and that fluid is at the recommended level. Battery • Check and recharge as necessary .
GENERAL INFORMATION Notice to utility vehicle and truck owners W ARNINGS Utility vehicles have a significantly higher rollover rate than other types of vehicles.
How your vehicle differs from other vehicles Sport utility vehicles and trucks can differ from some other vehicles in a few noticeable ways. Y our vehicle may be: E145299 • Higher - to allow higher load carrying capacity and to allow it to travel over rough terrain without getting hung up or damaging underbody components.
As a result of the above dimensional differences, Sport utility vehicles and trucks often will have a higher center of gravity and a greater difference in center of gravity between the loaded and unloaded condition. These differences that make your vehicle so versatile also make it handle differently than an ordinary passenger car .
Loss of air pressure may adversely affect tire performance. For this reason: Note: Do not drive the vehicle above 50 mph (80 km/h). Note: Do not drive further than 120 mi (200 km). Drive only to the closest authorized Ford dealer or tire repair shop to have your tire inspected.
What to do When a Tire Is Punctured Y ou can repair a tire puncture within the tire's tread area in two stages with the kit. • In the first stage, inflate the tire with a sealing compound and air .
E175981 7 . T urn dial (A) clockwise to the sealant position. Switch the kit on by pressing the on/off button (B). 8. Inflate the tire to the pressure listed on the tire label located on the driver' s door or the door jamb area.
9 . When the tire reaches the recommended tire pressure, switch off the kit, unplug the power cable, and disconnect the hose from the tire valve. R e-install the valve cap on the tire valve and return the kit to the stowage area.
What to Do After the Tire has Been Sealed After using the kit to seal your tire, you will need to replace the sealant canister . Y ou can obtain sealant canisters and spare parts at an authorized Ford dealer . Y ou can dispose of empty sealant canisters at home.
4. R otate the sealant canister up 90 degrees and pull away from casing/housing to remove. Installation of the sealant canister to the kit 1. With the canister held perpendicular to the housing, insert the canister nozzle into the connector and push until seated.
conditions and driving styles. Due to their design, low-profile tires and wheels are more prone to road damage from potholes, rough or unpaved roads, car wash rails and curb contact than standard tires and wheels. Note: Y our vehicle's warranty does not cover these types of damages.
Crossover vehicles have a significantly higher rollover rate than other types of vehicles. T o reduce this risk of serious injury or death from a rollover or other crash you must: • Avoid sharp turns and abrupt maneuvers. • Drive at safe speeds for the conditions.
depends upon the actual conditions of their use, however , and may depart significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
* Standard load: A class of P -metric or Metric tires designed to carry a maximum load at set pressure. For example: for P -metric tires 35 psi (2.4 bar) or 36 psi (2.5 bar) depending on tire size and for Metric tires 36 psi (2.5 bar). Increasing the inflation pressure beyond this pressure will not increase the tire ’ s load-carrying capability .
Information on P T ype Tires H I J K L M A B C D E F G E142543 P215/65R15 95H is an example of a tire size, load index and speed rating. The definitions of these items are listed below . (Note that the tire size, load index and speed rating for your vehicle may be different from this example.
Speed rating Letter rating 81 mph (130 km/h) M 87 mph (140 km/h) N 99 mph (159 km/h) Q 106 mph (171 km/h) R 112 mph (180 km/h) S 118 mph (190 km/h) T 124 mph (200 km/h) U 130 mph (210 km/h) H 149 mph .
K. Maximum Load: Indicates the maximum load in kilograms and pounds that can be carried by the tire. See the Safety Compliance Certification Label (affix ed to either the door hinge pillar , door-latch post, or the door edge that meets the door-latch post, next to the driver' s seating position), for the correct tire pressure for your vehicle.
A B C B D E142544 L T type tires have some additional information beyond those of P type tires. These differences are described below . A. L T : Indicates a tire, designated by the Tire and Rim Association, that is intended for service on light trucks.
A. T : Indicates a type of tire, designated by the Tire and Rim Association, that is intended for temporary service on cars, sport-utility vehicles, minivans and light trucks. B. 145: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge.
Always inflate your tires to the Ford recommended inflation pressure even if it is less than the maximum inflation pressure information found on the tire.
Note: If you overfill the tire, release air by pressing on the metal stem in the center of the valve. Then recheck the pressure with your tire gauge. 4. R eplace the valve cap. 5. R epeat this procedure for each tire, including the spare. Note: Some spare tires operate at a higher inflation pressure than the other tires.
Damage Periodically inspect the tire treads and sidewalls for damage (such as bulges in the tread or sidewalls, cracks in the tread groove and separation in the tread or sidewall). If damage is observed or suspected have the tire inspected by a tire professional.
Tire R eplacement R equirements Y our vehicle is equipped with tires designed to provide a safe ride and handling capability . W ARNINGS Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P -metric versus L T -metric or all-season versus all-terrain) as those originally provided by Ford.
Important: R emember to replace the wheel valve stems when the road tires are replaced on your vehicle. The two front tires or two rear tires should generally be replaced as a pair . The tire pressure sensors mounted in the wheels (originally installed on your vehicle) are not designed to be used in aftermarket wheels.
Tire and Wheel Alignment A bad jolt from hitting a curb or pothole can cause the front end of your vehicle to become misaligned or cause damage to your tires. If your vehicle seems to pull to one side when you ’ re driving, the wheels may be out of alignment.
USING SUMMER TIRES Summer tires provide superior performance on wet and dry roads. Summer tires do not have the Mud and Snow (M+S or M/S) tire traction rating on the tire side wall.
The tires on your vehicle may have all-weather treads to provide traction in rain and snow . However , in some climates you may need to use snow chains. Y our vehicle may not be compatible with snow chain or cable usage with the factory-fitted wheels and tires.
As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.
Note: Each road tire is equipped with a tire pressure sensor located inside the wheel and tire assembly cavity . The pressure sensor is attached to the valve stem. The pressure sensor is covered by the tire and is not visible unless the tire is removed.
Customer action required Possible cause Low tire pressure warning light Make sure tires are at the proper pressure. See Inflating your tires in this chapter .
When Inflating Y our Tires When putting air into your tires (such as at a gas station or in your garage), the tire pressure monitoring system may not respond immediately to the air added to your tires.
Dissimilar Spare Wheel and Tire Assembly Information W ARNING Failure to follow these guidelines could result in an increased risk of loss of vehicle control, injury or death. If you have a dissimilar spare wheel and tire, then it is intended for temporary use only .
• W et weather driving capability . • All-wheel driving capability . When driving with the full-size dissimilar spare wheel and tire assembly additional caution should be given to: • T owing a trailer . • Driving vehicles equipped with a camper body .
5. R emove the steel winged washer nut securing the spare tire by turning it counterclockwise. 6. R emove the spare tire from the spare tire compartment. 7 . R emove plastic wing nut and jack and lug wrench assembly . Detach lug wrench from jack by turning the jack hex nut drive screw counterclockwise.
Stowing the flat tire Y ou cannot store the full-sized road wheel in the temporary spare tire well. 1. Find the flat tire retainer strap tucked inside the jack channel. Lower the carpeted load floor . 2. Stow the flat tire in the cargo area on the load floor with the wheel facing up.
TECHNICAL SPECIFICATIONS Wheel Lug Nut T orque Specifications W ARNING When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel.
E145950 Wheel pilot bore A Inspect the wheel pilot hole and mounting surface prior to installation. R emove any visible corrosion or loose particles. 369 MKX (CD9) Canada/United States of America, enU.
ENGINE SPECIFICATIONS - 2. 7L ECOBOOST ™ 2. 7L EcoBoost engine Engine 164 Cubic inches Minimum 87 octane R equired fuel 1-4-2-5-3-6 Firing order 10 .
ENGINE SPECIFICATIONS - 3. 7L 3. 7L engine Engine 227 Cubic inches Minimum 87 octane R equired fuel 1-4-2-5-3-6 Firing order 10 .5:1 Compression ratio 0 .
MO T ORCRAFT P ARTS - 2. 7L ECOBOOST ™ 2. 7L EcoBoost Component F A-1912 Air filter element FL-2062 Oil filter BXT -94RH7-730 Battery SP -542 Spark plugs FP -80 Cabin air filter WW -2350 (driver sid.
MO T ORCRAFT P ARTS - 3. 7L 3. 7L V6 TiVCT Component F A-1912 Air filter element FL-500-S Oil filter BXT -94RH7-730 Battery SP -520 Spark plugs FP -80 Cabin air filter WW -2350 (driver side) Windshiel.
VEHICLE IDENTIFICATION NUMBER The vehicle identification number is located on the left-hand side of the instrument panel. E142476 Please note that in the graphic, XXXX is representative of your vehicle identification number .
TRANSMISSION CODE DESIGNATION E167814 The transmission code is on the Safety Compliance Certification Label. The following table shows the transmission code along with the transmission description.
CAP ACITIES AND SPECIFICATIONS - 2. 7L ECOBOOST ™ Capacities W ARNING The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury .
Capacity Item 21 oz (0 .595 kg) A/C refrigerant 5.2 fl oz (155 ml) A/C refrigerant compressor oil * Appro ximate dry fill capacity . Actual amount may vary during fluid changes. Specifications Materials Specification Name WSS-M2C946-A R ecommended motor oil (U .
Specification Name WSS-M2C946-A Optional motor oil (Canada): Motorcraft SAE 5W -30 Synthetic Motor Oil CX O-5W30-LFS12 WSS-M97B44-D2 Engine coolant (U .
Specification Name WSS-M2C938-A Automatic transmission fluid (U.S. and Mexico): MERCON L V Motorcraft MERCON L V Automatic T ransmission Fluid XT -10-QL VC WSS-M2C938-A Automatic transmission fluid (Canada): MERCON L V Motorcraft MERCON L V Automatic T ransmission Fluid CXT -10-L V12 WSS-M14P19-A Windshield washer fluid (U .
Specification Name WSH-M1C231-B A/C refrigerant compressor oil: Motorcraft P AG R efrigerant Compressor Oil YN-12-D ESB-M1C93-B Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5 -- Lock cylinders (U .
W e recommend Motorcraft motor oil for your vehicle. If Motorcraft oil is not available, use motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.
Capacity Item 6. 0 qt (5. 7 L) Engine oil 11. 7 qt (11. 1 L) Engine coolant Between MIN/MAX on brake fluid reservoir Brake fluid 2.4 pt (1. 15L) R ear differential fluid (All Wheel Drive) 11.8 fl oz (0 .35 L) Power T ransfer Unit (PTU) fluid (All Wheel Drive) 11.
Specifications Materials Specification Name WSS-M2C945-A R ecommended motor oil (U .S.): Motorcraft SAE 5W -20 Premium Synthetic Blend Motor Oil X O-5W20-QSP WSS-M2C945-A R ecommended motor oil (Canad.
Specification Name WSS-M97B44-D2 Engine coolant (Canada): Motorcraft Orange Antifreeze/Coolant Prediluted CVC-3DIL-B WSS-M6C65-A2 Brake fluid: Motorcraft DOT 4 L ow Viscosity (L V) High Performance Motor V ehicle Brake Fluid PM-20 WSP -M2C197-A Rear differential (All Wheel Drive) fluid (U .
Specification Name WSS-M14P19-A Windshield washer fluid (U .S. and Mexico): Motorcraft Premium Windshield W ash Concentrate with Bitterant ZC-32-B2 WSS-M14P19-A Windshield washer fluid (Canada): Motorcraft Premium Quality Windshield W asher Fluid CX C-37-(A, B, D, F) WSH-M17B19-A A/C refrigerant (U .
Specification Name -- Lock cylinders (U .S.): Penetrating and L ock Lubricant XL-1 -- Lock cylinders (Canada): Penetrating Fluid CX C-51-A -- Lock cylinders (Mexico): Penetrating and L ock Lubricant M.
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricants Specification Advisory Council (ILSAC). Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty .
GENERAL INFORMATION Radio Frequencies and R eception Factors AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and T elecommunications Commission (CRT C). Those frequencies are: • AM: 530 , 540-1700 , 1710 kHz • FM: 87 .
Do not expose discs to direct sunlight or heat sources for extended periods. MP3 T rack and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 track mode (system default) and MP3 folder mode.
A B C D E F E171512 CD slot: Insert a CD. A Eject: Press the control to eject a CD. B 390 MKX (CD9) Canada/United States of America, enUSA, ASO/OGC R eview Audio System.
TUNE: T urn the control to search manually through the radio frequency band. The system stops at the first station it finds in that direction. In SIRIUS mode, the system selects the previous or next channel. If you select a specific category (Jazz, R ock, News, etc.
GENERAL INFORMATION W ARNING Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
A B G C D F E E161891 Menu Item Item Phone A Navigation B Climate C Settings D Menu Item Item Home E Information F Entertainment G This system uses a four-corner strategy to provide quick access to several vehicle features and settings. The touchscreen provides easy interaction with your cell phone, entertainment, information and system settings.
Note: Y ou can access the entertainment features for 30 minutes after you switch the ignition off , and no doors are opened. PHONE Press to select any of the following: Menu Item Phone Quick Dial Phon.
HOME E142613 Press to access the home screen. Note: Depending on your vehicle ’ s option package and software, the screens may vary in appearance from the descriptions in this section. The features may also be limited depending on the market. Check with an authorized dealer for availability .
Action and Description Controls Eject a CD from the entertainment system. Eject Press this button to switch the display screen off . Press again, or touch the screen to switch the display screen on. Display T ouch the control repeatedly to switch between media modes.
Using the Steering Wheel Controls Depending on your vehicle, it may also have the following controls: Action and Description Control Adjust the volume of playing media. VOL Press to start a voice session. Press again to interrupt a voice prompt and begin speaking.
Safety Information W ARNING Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
Speed-restricted Features Enabling V alet Mode System Functionality Editing settings while the rear view camera or active park assist are active Editing wireless settings Wi-Fi and Wireless Editing th.
Privacy Information When you connect a cell phone to SYNC, the system creates a profile within your vehicle that links to that cell phone. This profile helps in offering you more cellular features and operating more efficiently .
Press the voice button and when prompted say: V oice command Main Menu What Can I Say Previous Page Go Back Help Helpful Hints • Make sure the interior of your vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent the system from correctly recognizing spoken voice commands.
Action and Description Menu Item In this mode the system provides detailed interaction and guidance. Novice Interaction Mode This mode has less audible interaction and more tone prompts. Advanced The system uses these short questions to confirm your voice command.
SETTINGS A B C D E F E161968 Menu Item Item Clock A Display B Sound C Menu Item Item V ehicle D Settings E Help F Clock E142607 Under this menu, you can set the clock, access and adjust the display , sound and vehicle settings as well as access settings for specific modes or the help feature.
T o make adjustments using the touchscreen, select: Action and Description Menu Item Press the settings icon. Settings Press the + or - to adjust the time. Clock From this screen, you can also make other adjustments such as 12-hour or 24-hour mode, activate GPS time synchronization and have the system automatically update new time zones.
T o make adjustments using the touchscreen, select: Action and Description Menu Item Press the settings icon. Settings Display Then select from the following: Allows you to switch the display off . It also allows you to set the screen to a certain brightness or have the system automatically change based on the outside light level.
T o make adjustments using the voice button, press the button and when prompted, say: V oice command Display Settings Uploading Photos for Y our Home Screen W allpaper Note: Y ou cannot load photos directly from your camera. Y ou must access the photos either from your USB mass storage device or from an SD card.
T o make adjustments using the touchscreen, select: Menu Item Settings Sound Then select from the following: Bass Midrange T reble Set Balance and Fade Occupancy Mode Menu Item Speed Compensated V olume DSP Note: Y our vehicle may not have all of these sound settings.
T o make adjustments using the touchscreen, select: Action and Description Menu Item Press the settings icon. Settings V ehicle Ambient Lighting • Y ou can then touch the desired color . • Use the scroll bar to increase or decrease the intensity .
Action and Description Menu Item Mileage Interval (Miles) T o run the vehicle health report immediately . Run V ehicle Health Report Now Y ou can find more information on V ehicle Health R eport in this chapter . Camera Settings This menu allows you to access settings for your rear view camera.
Enable V alet Mode E142607 V alet mode allows you to lock the system. No information is accessible until the system is unlocked with the correct PIN. Note: If the system locks, and you need to reset the PIN, please contact the Customer R elationship Center .
T o make adjustments using the touchscreen, select: Action and Description Menu Item Press the settings icon. Settings System Then select from the following: Select to have the touchscreen display in English, Spanish or French. Language Select to display units in kilometers or miles.
T o make adjustments using the touchscreen, select: Action and Description Menu Item Settings V oice Control Then select from the following: Novice interaction mode provides more detailed interaction and guidance. Advanced mode has less audible interaction and more tone prompts.
T o make adjustments using the touchscreen, select: Action and Description Menu Item Press the settings icon. Settings Media Player Then select from the following: When this feature is on, the system automatically switches to the media source upon initial connection.
T o make adjustments using the touchscreen, select: Action and Description Menu Item Press the settings icon. Settings Navigation Then select from the following: T urn breadcrumbs on and off. Map Preferences Have the system display your turn list top to bottom or bottom to top.
Action and Description Menu Item Have the system use guidance prompts. Navigation Preferences Have the system automatically fill-in State/Province information. Have the system automatically avoid traffic concerns or allow you to accept or decline an alternative route.
Action and Description Menu Item Have the system display where there may be reduced visibility . Have the system turn on your radio for traffic announcements.
Action and Description Menu Item T urn on or turn off the 911 Assist feature. See Information (page 455). 911 Assist Select the type of notification for phone calls - ring tone, beep, text to speech or silent. Phone Ringer Select the type of notification for text messages - alert tone, beep, text to speech, or have it be silent.
T o make adjustments using the touchscreen, select: Action and Description Menu Item Press the settings icon. Settings Wireless & Internet Then select from the following: Wi-Fi Network (Client) Mode Wi-Fi Settings T urns the Wi-Fi feature on and off in your vehicle.
Action and Description Menu Item Gateway (Access Point) Devices List Allows you to view recent connections to your Wi-Fi system. Instead of using Wi-Fi, your system can also use a USB mobile broadband connection to access the internet. (Y ou must switch on your mobile broadband device on your personal computer before connecting it to the system.
E142626 The Wi-Fi CERTIFIED L ogo is a certification mark of the Wi-Fi Alliance. Help E142607 T o make adjustments using the touchscreen, select: Action and Description Menu Item Press the settings icon.
Action and Description Menu Item View the licenses for any software and applications installed on your system. View Software Licenses Certain features are not accessible when your vehicle is moving. Driving R estrictions T urn on and turn off the 911 Assist feature.
Press the voice button and when prompted say: V oice command Help Y ou can say help at any time to get assistance with commands, menus or other information.
Menu Item and Description Message AM A FM B SIRIUS C CD D USB E T ouch this button to scroll down for more options, for example SD Card and USB F These buttons change with the media mode you are in. G Radio memory presets. H Note: Some features may not be available in your area.
Action and Description Item T ouch either tab to listen to the radio. T o change between AM and FM presets, just touch the AM or FM tab. AM FM Save a station by pressing and holding one of the memory preset areas. There is a brief mute while the radio saves the station.
Action and Description Menu Item T reble Set Balance and Fade DSP Occupancy Mode Speed Compensated V olume This allows you to select a category of music you would like to search for . Y ou can then choose to either seek or scan for the stations playing that category .
HD Radio ™ Information (If Available) Note: HD R adio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Y our system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives.
T o turn the feature on and use it, select AM or FM and the select: Action and Description Menu Item Options T AG Button When you hear a song you, select: On The system automatically saves the song' s information and transfers it to your portable music player (if supported) when you connect it to the system.
When HD Radio broadcasts are active, you can access the following functions: Action and Description Menu Item Allows you to hear a brief sampling of all available stations. This feature still works when HD Radio reception is on, although it does not scan for HD2-HD7 channels.
HD R adio R eception and Station T roubleshooting Potential reception issues If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength.
Potential station issues Action Cause Issues No action required. This is a broadcast issue. This is poor time alignment by the radio broad- caster . Echo, stutter , skip or repeat in audio. Increase or decrease in audio volume. No action required. The reception issue may clear up as you continue to drive.
HD Radio T echnology manufactured under license from iBiquity Digital Corp. U .S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology .
T o turn the feature on press the lower left corner of the touchscreen, and then select: Action and Description Menu Item SIRIUS Y ou can then select any of the following: Save a channel by pressing and holding one of the memory preset areas. There is a brief mute while the radio saves the channel.
Action and Description Menu Item T ouch this button to hear a brief sampling of channels. Scan T ouch this button to view a list of all available stations. Scroll to see more categories. T ouch the station you want to listen to. Browse Note: SIRIUS does not support the Alert feature on all channels.
Menu Item, Actions and Description Menu Item T ouch this button to adjust settings for: Sound Settings Bass Midrange T reble Set Balance and Fade DSP Occupancy Mode Speed Compensated V olume This allows you to select a category of music you would like to search for .
SIRIUS Satellite Radio Information Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
SIRIUS Satellite R adio R eception Factors and T roubleshooting Potential reception issues For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other materials as far away from the antenna as possible.
T roubleshooting tips Action Cause Message Contact SIRIUS at 1-888-539-7474 to subscribe to the channel, or tune to another channel. Y our subscription does not include this channel. Unsubscribed Channel The signal is blocked. When you move into an open area, the signal should return.
SIRIUS Satellite Radio V oice Commands E142599 If you are listening to SIRIUS satellite radio, press the voice button on the steering wheel controls. Y ou will hear a prompt, you can then say any of the commands in the following table.
Insert your CD then select: Action and Description Menu Item T ouch this button to repeat the currently playing track, all tracks on the disc or switch the feature off if already on. R epeat T ouch this button to play the tracks or entire albums in random order , or switch the feature off if already on.
If you are not listening to a CD, press the voice button and, after the tone, say: V oice command CD Player When listening to a CD you can say many commands.
This feature allows you to plug in media playing devices, memory sticks, flash drives or thumb drives, and charge devices if they support this feature.
Sound Y ou can adjust the settings for: Action and Description Menu Item Bass Sound Settings Midrange T reble Set Balance and Fade DSP EQ Mode Speed Compensated V olume Allows you to select more settings, which is under Media Player . See Settings (page 403).
Browse This feature allows you to view the contents of the device. It also allows you to search by categories, for example genre, artist or album. If you want to view song information, for example Title, Artist, File, Folder , Album, and Genre, touch the on-screen album art.
V oice command Pause Say the name of what you would like to listen to such as a band, song, album or playlist. Play * Play Artist ___ * Play Song ___ Similar Music Help * ___ is a dynamic listing, meaning that it could be the name of anything, such as a group, artist or song.
T o access, press the lower left corner on the touchscreen, then select: Menu Item BT S tereo Bluetooth Audio V oice Commands E142599 The voice system allows you to control your media with a simple voice command. For example to change songs, press the voice button and follow the system prompts.
Message Item Phone A Quick Dial B Phonebook C History D Messaging E Settings F Hands-free calling is one of the main features of SYNC®. Once you pair your cell phone, you can access many options using the touchscreen or voice commands. While the system supports a variety of features, many are dependent on your cell phone ’ s functionality .
T ouch the upper left corner of the touchscreen: Action and Description Message Add phone Follow the on-screen instructions. Find SYNC Make sure that Bluetooth is set to On and that your cell phone is in the correct mode. See your cell phone ’ s manual if necessary .
T o pair a subsequent cell phone, select: Action and Description Menu Item Phone Settings Bluetooth Devices Add Device Follow the on-screen instructions. Find SYNC Make sure that Bluetooth is set to On and that your cell phone is in the correct mode. See your cell phone ’ s manual if necessary .
Press the voice button and say a command similar to the following: V oice command Call Dial Y ou can say the name of a person from your phone book to call or a say a number to dial. For example "Call Jenny" or "Dial 867-5309" . E142632 T o end the call or exit phone mode, press and hold the phone button.
Action and Description Menu Item Privacy Join Calls End Select to call stored contacts. Quick Dial T ouch this button to access and call any contacts in your previously downloaded phonebook.
Action and Description Menu Item Quick Dial Favorites Send text messages using the touchscreen. See T ext Messaging later in this section. Messaging T ouch this button to access various phone settings, for example turning Bluetooth on and off , managing your phonebook and more.
T o compose and send a text message, select: Action and Description Message Phone Messaging Enter a cell phone number or choose from your phonebook. Send T ext Allows you to customize the pre-defined message or create a message on your own. Edit T ext Sends the message as it is.
When a new message arrives, an audible tone sounds and the screen displays a pop-up with the caller name and ID, if supported by your cell phone. Y ou can select: Action and Description Message Action and Description Message T o view the text message.
Action and Description Message Select the ring tone you want to hear when you receive a call. Choose from possible system ring tones, your currently paired cell phone ’ s ring tone, a beep, text-to-speech or a silent notification. Phone Ringer Select a text message notification, if supported by your cell phone.
Press the voice button and when prompted say any of the following or a similar command: V oice command Call V oicemail V oice command Listen to Message R eply to Message Pair Phone Help INFORMATION E1.
Menu Item Item SYNC Services A T ravel Link B Alerts C Calendar D Apps E Where Am I? F E142608 If your vehicle is equipped with Navigation, press the Information button to access these features. If your vehicle is not equipped with Navigation, press the corner of the touchscreen with the green tab.
Note: When you connect, the service uses GPS technology and advanced vehicle sensors to collect your vehicle' s current location, travel direction and speed to help provide you with the directions, traffic reports, or business searches you request.
T o use voice commands, press the voice button and say: Action and Description V oice Command This initiates an outgoing call to SYNC Services using your paired and connected Bluetooth- enabled cellular phone. Once you connect to the service, follow the voice prompts to request the desired service, for example traffic or directions.
R eceiving T urn-by-T urn Directions Press the voice button and say: Action and Description V oice Command T o receive directions to a location. Once you select your destination, the system uploads your current vehicle location, calculates a route based on current traffic conditions and sends it back to your vehicle.
Action and Description V oice Command subscription. For more information on Operator Assist, visit www .SYNCMyRide .com/support. If you miss a turn, SYNC automatically asks if you want the route updated. Say yes when prompted and the system sends a new route to your vehicle.
SYNC Services Quick Tips Tips Y ou can personalize your Services feature to provide quicker access to your most used or favorite information. Y ou can save address points, such as work or home. Y ou can also save favorite information like sports teams, for example Detroit Lions, or a news category .
Sirius T ravel Link (If Equipped) W ARNING Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
Action and Description Menu Item T ouch this button to view the nearby weather , current weather , or the five day forecast for the chosen area. W eather Select to see the weather map, which can show storms, radar information, charts and winds. Map Select to choose from a listing of weather locations.
Sirius T ravel Link V oice Commands E142599 Press the voice button on the steering wheel controls. When prompted, say any of the following or a similar command: V oice command Show T raffic Show W eather Help Alerts E142608 If your vehicle is equipped with Navigation, touch the I (Information) button to access these features.
Note: The S YNC 911 Assist feature must be set on prior to the incident. Note: Before setting this feature on, make sure that you read the 911 Assist Privacy Notice later in this section for important information. Note: If any user turns 911 Assist on or off , that setting applies for all paired phones.
Menu Item Y ou can also select: Help 911 Assist T o make sure that 911 Assist works properly: • SYNC must be powered and working properly at the time of the incident and throughout feature activation and use. • The 911 Assist feature must be set on prior to the incident.
911 Assist May Not W ork If: • Y our cellular phone or 911 Assist hardware sustains damage in a crash. • The vehicle' s battery or the SYNC system has no power . • The phones(s) previously paired or connected to the system are thrown from the vehicle.
The system allows you to check your vehicle ’ s overall health in the form of a diagnostic report card. The V ehicle Health R eport contains valuable information, for example: • V ehicle diagnostic information. • Scheduled maintenance. • Open recalls and Field Service Actions.
Where Am I? For information about your current location, select: Action and Descrip- tion Menu Item View your vehicle' s current location, if your vehicle is equipped with navigation. If your vehicle is not equipped with Where Am I? Action and Descrip- tion Menu Item navigation, nothing displays.
E171848 K Power: T ouch the button to switch the system on and off. S witching off the climate control system prevents outside air from entering the vehicle. A Passenger settings: B T ouch the + or – to increase or decrease the air temperature on the passenger side of the vehicle.
Note: The passenger side temperature and the Dual indicator automatically turn on when the passenger is adjusting their temperature control. Fan speed: T ouch + or - to increase or decrease the volume of air circulated in your vehicle. C Note: When the system is controlling the fan speed automatically , all the fan speed indicators turn off.
Max Defrost: T ouch the button to maximize defrosting. Outside air flows through the windshield vents, fan automatically adjusts to the highest speed and the temperature dial returns to the full heat position. Y ou can use this setting to defog or clear a thin covering of ice from the windshield.
V oice commands Climate On Climate Off Adjust the temperature to between 15. 0 - 30 . 0°C or 59 - 86°F . Set temperature NAVIGATION Note: The navigation SD card must be in the SD card slot to operate the navigation system. If you need a replacement SD card, see an authorized dealer .
For an address destination entry , press: Action and Descrip- tion Menu Item Pressing this button makes the address location appear on the map. Go T o choose a previous destination, press: Action and Descrip- tion Menu Item The last 20 destina- tions you have selected appear .
T o begin navigation press: Action and Description Menu Item Y ou can cancel the route or have the system demo the route for you. Start R oute During route guidance, you can press the talking bubble icon that appears in the upper right navigation corner (green bar) if you want the system to repeat route guidance information.
T o expand these listings, press the + in front of the listing. The system also allows you to sort alphabetically , by distance or by cityseekr listings (if available). cityseekr Note: cityseekr point of interest (POI) information is limited to appro ximately 912 cities (881 in the United States, 20 in Canada and 11 in Mexico).
• 24 hour room service • Fitness center • Internet access • Pool • Wi-FI For restaurants, cityseekr can provide information such as star rating, average cost, review , handicap access, hours of operation, and website address.
Second Level Messages, Actions and Descriptions Menu Item Bottom to T op T op to Bottom When parking point of interest notification is on, the icons display on the map when you get close to your destination. This may not be very useful in dense areas, and may clutter the map when other points of interest display .
Second Level Messages, Actions and Descriptions Menu Item Select a level of cost for the calculated Eco R oute. The higher the setting, the longer the time allotment is for the route. Eco Time Penalty When activated, you can to choose to have the system avoid motorways, toll roads, ferries and car trains when planning your route.
T raffic Preferences Second Level Messages, Actions and Descriptions Menu Item T raffic Preferences Then select any of the following: Y ou can choose how you want the system to handle traffic problems along your route. Avoid T raffic Problems Have the system reroute you to avoid traffic incidents that develop and impact the current route.
Avoid Area Second Level Messages, Actions and Descriptions Menu Item Choose areas which you want the system to avoid when calculating a route for you Avoid Areas Then select any of the following: Once you make a selection, the system tries to avoid the area(s) if possible for all routes.
E174016 Change the appearance of the map display by repeatedly pressing the arrow button in the upper left corner of the screen. It toggles between three different map modes: Heading up, North up and 3D . E142642 Heading up (2D map) always shows the direction of forward travel to be upward on the screen.
Auto Zoom Press the green bar to access map mode, then select the + or - zoom button to bring up the zoom level and Auto buttons on the touchscreen. When you press Auto , Auto Zoom turns on and Auto displays in the bottom left corner of the screen in the map scale.
E142655 No GPS symbol indicates that insufficient GPS satellite signals are available for accurate map positioning. This icon may display under normal operation in an area with poor GPS access.
Action and Description Menu Item Edit R oute Preferences Edit T raffic Preferences Cancel R oute HERE is the digital map provider for the navigation application. If you find map data errors, you may report them directly to Here by going to www .here.com/mapcreator .
One-shot Destination Street Address T o set a destination with voice commands, you can say: Action and Descrip- tion V oice Command The system asks you to say the full address. The system displays an example on-screen. Find an Address Y ou can then speak the address naturally , such as "One two three four Main Street, Anytown" .
Phone issues Possible solution(s) Possible cause(s) Issue T ry turning off the device, resetting the device or removing the device' s battery , then trying again. T ry pushing your phonebook contacts to SYNC by using the Add Contacts feature. Use the SYNCmyphone feature available on the website.
Phone issues Possible solution(s) Possible cause(s) Issue T ry deleting your device from SYNC, deleting SYNC from your device and trying again. Check the security and auto accept and prompt always settings relative to the SYNC Bluetooth connection on your phone.
USB and media issues Possible solution(s) Possible cause(s) Issue Make sure you are using the manufacturer' s cable. Make sure you insert the USB cable correctly into the device and the USB port. Make sure that the device does not have an auto-install program or active security settings.
V ehicle Health Report and Services (T raffic, Directions and Information) issues Possible solution(s) Possible cause(s) Issue This is a free feature, but you must first register online to use it. Y ou did not activate your account on the website. I received a text that I did not activate V ehicle Health R eport.
V ehicle Health Report and Services (T raffic, Directions and Information) issues Possible solution(s) Possible cause(s) Issue T urn off ID blocker on your phone as the system recognizes you by your phone number . Make sure the currently connected phone is the same one that is registered on your SYNCMyRide account.
V oice command issues Possible solution(s) Possible cause(s) Issue Make sure you are saying the complete title, such as "California remix featuring Jennifer Nettles" . If the song titles are in all CAPS, you have to spell them. L OLA requires you to say "L-O-L- A" .
V oice command issues Possible solution(s) Possible cause(s) Issue If a contact is in CAPS, you have to spell it. JAKE requires you to say " Call J-A-K -E" . T ouchscreen system reset The touchscreen system has System R eset feature that can be performed if the function of a SYNC feature is lost.
For a complete listing of the accessories that are available for your vehicle, please contact your authorized dealer or visit our online store at: W eb Address www .
For maximum vehicle performance, keep the following information in mind when adding accessories or equipment to your vehicle: • When adding accessories, equipment, passengers and luggage to your veh.
PROTECT Y OURSELF FROM THE RISING COST OF VEHICLE REP AIRS WITH A LINCOLN EXTENDED SERVICE PLAN. SERVICE PLANS (U .S. Only) Lincoln owners have discovered the powerful protection of Lincoln Extended Service Plan.
T ransferable Coverage If you sell your vehicle before your Lincoln Extended Service Plan coverage expires, you can transfer any remaining coverage to the new owner . Whenever you sell your vehicle, prospective buyers may have a higher degree of confidence that vehicle was properly maintained with Lincoln ESP , thereby improving resale value.
There are several Lincoln Extended Service Plans available in various time, distance and deductible combinations. Each plan is tailored to fit your own driving needs, including reimbursement for towing and rental.
GENERAL MAINTENANCE INFORMATION Why Maintain Y our V ehicle? Carefully following the maintenance schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may help to increase the value of your vehicle when you sell or trade it.
Y our vehicle is equipped with the Intelligent Oil-Life Monitor system, which displays a message in the information display at the proper oil change interval. This interval may be up to one year or 10000 miles (16000 kilometers). When the oil change message appears in the information display , it is time for an oil change.
Make sure to change your vehicle ’ s oils and fluids at the specified intervals or in conjunction with a repair . Flushing is a viable way to change fluid for many vehicle sub-systems during scheduled maintenance.
Check every six months Safety belts and seat latches for wear and function. Safety warning lamps (brake, ABS, airbag and safety belt) for operation. W asher spray and wiper operation.
Multi-Point inspection Steering and linkage Exterior lamps operation Tires (including spare) for wear and proper pressure ** Fluid levels * ; fill if necessary Windshield for cracks, chips or pits For.
When to expect the message prompting you to change your oil V ehicle use and example Interval Normal 7500-10000 miles (12000-16000 km) Normal commuting with highway driving No, or moderate, load or to.
Normal Maintenance Intervals At every oil change interval as indicated by the information display * Change engine oil and filter . ** R otate the tires. Perform a multi-point inspection (recommended). Inspect the automatic transmission fluid level (if equipped with a dipstick).
Other maintenance items 1 R eplace cabin air filter . Every 20000 miles (32000 km) R eplace engine air filter . Every 30000 miles (48000 km) Change engine coolant. 2 At 100000 miles (160000 km) R eplace spark plugs. Every 100000 miles (160000 km) Inspect accessory drive belt(s).
SPECIAL OPERATING CONDITIONS SCHEDULED MAINTENANCE If you operate your vehicle primarily in any of the following conditions, you need to perform extra maintenance as indicated. If you operate your vehicle occasionally under any of these conditions, it is not necessary to perform the extra maintenance.
T owing a trailer or using a car-top carrier Change engine oil and filter as indicated by information display and perform services listed in the Normal Scheduled Maintenance chart. As required Inspect U-joints. Inspect frequently , service as required See axle maintenance items under Ex ceptions .
Extensive idling or low-speed driving for long distances, as in heavy commercial use (such as delivery , taxi, patrol car or livery) Change engine oil and filter as indicated by information display and perform services listed in the Normal Scheduled Maintenance chart.
Operating in dusty or sandy conditions (such as unpaved or dusty roads) Perform multi-point inspection. Change automatic transmission fluid. Every 30000 miles (48000 km) * R eset your Intelligent Oil-Life Monitor after engine oil and filter changes. See Engine Oil Check (page 308).
Engine Air Filter and Cabin Air Filter R eplacement The life of the engine air filter and cabin air filter is dependent on exposure to dusty and dirty conditions. V ehicles operated in these conditions require frequent inspection and replacement of the engine air filter and cabin air filter .
E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: Dealer stamp E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspecti.
E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: Dealer stamp E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspecti.
E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: Dealer stamp E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspecti.
E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: Dealer stamp E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspecti.
E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: Dealer stamp E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspecti.
E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: Dealer stamp E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspecti.
E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: Dealer stamp E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspecti.
E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: Dealer stamp E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspecti.
E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: Dealer stamp E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspecti.
E146852 Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): Signature: Dealer stamp 521 MKX (CD9) Canada/United States of America, enUSA, ASO/OGC R eview S chedule.
END USER LICENSE AGREEMENT SYNC End User License Agreement (EULA) • Y ou have acquired a device ("DEVICE") that includes software licensed by Ford Motor Company and its affiliates ("FORD MOT OR COMP ANY") from an affiliate of Microsoft Corporation ("MS") .
IF Y OU DO NO T AGREE TO THIS END USER LICENSE AGREEMENT ("EULA") DO NOT USE THE DEVICE OR COP Y THE SOFTW ARE. ANY USE OF THE SOFTW ARE, INCLUDING BUT NO T LIMITED T O USE ON THE DEVICE, WILL CONSTITUTE Y OUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
and printed materials, any upgrades, and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to the terms of this EULA. If the SOFTW ARE is an upgrade, any transfer must include all prior versions of the SOFTW ARE.
If FORD MOT OR COMP ANY or third party software and services suppliers provide or make available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply .
.
EXPORT RESTRICTIONS: Y ou acknowledge that the SOFTW ARE is subject to U .S. and European Union export jurisdiction. Y ou agree to comply with all applicable international and national laws that apply to the SOFTW ARE, including the U .S. Export Administration R egulations, as well as end-user , end-use and destination restrictions issued by U .
R ead and follow instructions: Before using your Windows Automotive- based system, read and follow all instructions and safety information provided in this end user manual ("User' s Guide"). Not following precautions found in this User' s Guide can lead to an accident or other serious consequences.
Navigation Features: Any navigation features included in the system are intended to provide turn by turn instructions to get you to a desired destination. Please make certain all persons using this system carefully read and follow instructions and safety information fully .
account information, as well as other payment and personal information provided by you to T elenav (directly or through the use of the T elenav Software, is subject to T elenav ’ s privacy policy located at http://www . telenav .com. T elenav may revise this Agreement and the privacy policy at any time, with or without notice to you.
3. 1 License Limitations Y ou agree not to do any of the following: (a) reverse engineer , decompile, disassemble, translate, modify , alter or otherwise change the T elenav Software or any part there.
5. Limitation of Liability TO THE EXTENT PERMITTED UNDER APPLICABLE LAW , UNDER NO CIRCUMST ANCES SHALL TELENAV OR ITS LICENSORS AND SUPPLIERS BE LIABLE TO Y OU OR T O ANY THIRD P ARTY FOR ANY INDIREC.
and all other parties shall immediately cease all use of the T elenav Software. Notwithstanding the foregoing, T elenav may assign this Agreement to any other party at any time without notice, provided the assignee remains bound by this Agreement. 8. Miscellaneous 8.
8.6 The headings in this Agreement are for convenience of reference only , will not be deemed to be a part of this Agreement, and will not be referred to in connection with the construction or interpretation of this Agreement.
Permitted Use. Y ou agree to use this Data together with the T elenav Software solely for the internal business and personal purposes for which you were licensed, and not for service bureau, time-sharing or other similar purposes.
D AMAGES, DIRECT OR INDIRECT , WHICH MAY RESUL T FROM THE USE OR POSSESSION OF THE INFORMATION; OR FOR ANY L OSS OF PROFIT , REVENUE, CONTRACTS OR SAVINGS, OR ANY O THER DIRECT , INDIRECT , INCIDENT A.
accordance with these End-User T erms, and each copy of Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following “ Notice of Use, ” and shall be treated.
b. Limitation on Liability: The Third Party Data licensors, including Her Majesty , Canada Post and NRCan, shall not be liable: (i) in respect of any claim, demand or action, irrespective of the natur.
action alleging any loss, injury or damages, direct or indirect, which may result from the use or possession of the data or the Data. The licensors, including Her Majesty , Canada Post and NRCan, shal.
“ INSTITUT O GEOGRAFICO MILIT AR DEL ECUADOR AUTORIZACION N° IGM-2011- 01- PCO-01 DEL 25 DE ENERO DE 2011 ” Ecuador “ source: © IGN 2009 - BD TOPO ® ” “ Fuente: INEGI (Instituto Nacional de Estadística y Geografía) ” Guade- loupe, French Guiana and Marti- nique Mexico IV .
2. Display of Third Party Rights L egends for Belgium. Client shall, for each T rans- action that uses T raffic Codes for Belgium, provide the following notice to the End-User: “ T raffic Codes for Belgium are provided by the Ministerie van de Vlaamse Gemeenschap and the Ministèrie de l ’ Equipement et des T ransports.
Moldova, Poland, Slovenia and/or Ukraine “ source: © IGN 2009 – BD TOPO ® ” France “ Die Grundlagendaten wurden mit Genehmigung der zuständigen Behörden entnommen ” Germany “ Contains .
Product incorporates data which is © 20XX T elstra Corporation Limited, GM Holden Limited, Intelematics Australia Pty L td and Continental Pty L td. B.
is void if failure of the Data has resulted from accident, abuse, or misapplication. Any replacement Data will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer .
Entire Agreement These terms and conditions constitute the entire agreement between NAV2(and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof , and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter .
party . YOU AGREE NO T T O USE OR EXPL OIT GRACENO TE CONTENT , GRACENOTE D AT A, THE GRACENOTE SOFTW ARE, OR GRACENO TE SERVERS, EX CEPT AS EXPRESSL Y PERMITTED HEREIN.
United States and Mexico FCC ID: KMHSG1G1 IC: 1422A-SG1G1 Mexico Model: KMHSG1P1 NOM-121-SCT1-2009 The operation of this equipment is subject to the following two conditions: (1) This equipment or dev.
548 MKX (CD9) Canada/United States of America, enUSA, ASO/OGC R eview.
3 360 Degree Parking Aid Camera ............ 220 Camera Views ..................................................... 220 Front Camera ....................................................... 221 Side Camera ..............................................
Automatic T ransmission .............................. 182 Automatic T ransmission Adaptive Learning ............................................................ 186 Brake-Shift Interlock Override ......................... 185 If Y our V ehicle Gets Stuck In Mud or Snow .
Cleaning the Exterior .................................. 325 Exterior Chrome Parts ....................................... 326 Exterior Plastic Parts .......................................... 326 Stripes or Graphics ..................................
Engine Oil Check ......................................... 308 Adding Engine Oil .............................................. 308 Engine Oil Dipstick - 2. 7L EcoBoost ™ ...... 307 Engine Oil Dipstick - 3. 7L ........................... 308 Engine Specifications - 2.
G Garage Door Opener See: Universal Garage Door Opener ............. 158 Gauges ............................................................. 107 Engine Coolant T emperature Gauge ............. 109 Fuel Gauge ..........................................
Information Messages .................................. 121 Active Park ............................................................. 121 Adaptive Cruise Control .................................... 122 Advance T rac ™ ..............................
Locking and Unlocking .................................. 67 Activating Intelligent Access ............................. 69 Autolock .................................................................. 70 Auto Relock .....................................
P Parking Aids .................................................. 205 Principle of Operation ....................................... 205 Passive Anti-Theft System ............................ 80 SecuriLock® ...........................................
R eplacement Parts R ecommendation ........ 12 Collision Repairs ..................................................... 13 Scheduled Maintenance and Mechanical Repairs ................................................................. 12 W arranty on R eplacement Parts .
Ein wichtiger Punkt beim Kauf des Geräts Lincoln MKX (2016) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lincoln MKX (2016) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lincoln MKX (2016) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lincoln MKX (2016) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lincoln MKX (2016) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lincoln MKX (2016) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lincoln MKX (2016) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lincoln MKX (2016). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lincoln MKX (2016) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
