Benutzeranleitung / Produktwartung Magnum des Produzenten Lincoln Electric
Zur Seite of 52
Ar c W elding Guns for Semiautomatic Gas-Shielded W elding Optimize Y our W elding System! TM Featuring Our New Magnum EXPRESS TM Package (see page ...
Wire Power Source Feeder Gun Connector Gun Gun Consumables The Lincoln W elding Arc A T otal System Focused on Arc W elding Making good welds is a lot like making good music.
3 • Magnum's Patent Pending Handle grip design provides balance, r educes operator fatigue and offers a sure, confident grip Comfortable Handle • Three Layer Insulated Gooseneck Construction .
PRODUCTIVITY • One-piece modular trigger assembly is molded out of high heat resistant thermoset material to withstand heat and spatter and ensure long life.
Gun Consumables Match an Industry Standard Design Rotatable Gooseneck (Gun T ube) • Just loosen a single Allen screw to unlock and rotate the gooseneck into a position that is most comfortable for y.
Always A vailable: Our Quick-tur n Pledge Need gun consumables or parts in a hurry? Contact us via phone, fax or email to order the parts you need. That's our pledge.
Gun Consumables A Critical Link that Can Make the Differ ence • Industry standard design compatibility allows use on competitive guns • Industry standard part numbers ar e easy to order • W ide .
8 Four Easy Steps 1 2 3 4 Choose operating amperage range: Select an amperage range for your application, based on your knowledge of the thickness of material and your equipment capability .
9 Choose a Gun with the Right Operating Amperage Range S T E P 1 250 amps 200 amps 400 amps 300 amps 500 or 600 amps 100 amps Magnum 400 Gun With a longer gooseneck and a higher copper strand count cable than the 300, the 400 gun is built for operator comfort when welding with the greater heat levels generated by higher amperage applications.
10 Amperage Rating 60% Duty Cycle CO 2 Shielding Gas 200 A Net W eight 9 - 12 lbs. (4.0 - 5.4 kg) Wire Diameter Range .025” - .045” (0.6 mm - 1.2 mm) 10.
11 A small, lightweight gun intended for light job shop and fabrication applications. Best suited for welding on thin materials using .025–.030” wire.
12 Choose a Gun Connector S T E P 3 MFG. WIRE FEEDER MODEL CONNECTOR KITS FOR ST ANDARD GUNS T weco ® Adapted Hobart ® ESAB ® Miller ® Lincoln LN-7 Series, LN-742, LN-8, LN-9 Series LN-25 (Up to .052" (1.4 mm) Wire) LN-8, LN-9 Series, LN-25 (1/16" (1.
200 200 amps 2 1b 1a 4a 4b 3a 3b 3c K466-1 K466-2 K466-3 K466-4 K466-5 K466-6 K466-7 K466-8 K466-10 1a 1b 4a 4b 1a 4a 4b 1c 1b 1a 4a 4b 3b 1b 1c 2 2 3a 3c 2 1 4a 4b 2 1 4b 4a 2 1 4b 4a 2 1b 3a 4b 1 3b.
14 TIP Standard Duty Heavy Duty Tapered 10 Bulk 10 Bulk 10 Bulk 10 Bulk Notched (Alum.) QTY. WIRE DIAMETER .025" (0.6mm) .030" (0.8mm) .035" (0.
Gas Diffuser Assembly Diffuser Gas Diffuser Assembly 5 Bulk QTY. WIRE DIAMETER .025"–.030" (0.6–0.8mm) .035"–.045" (1) (0.9–1.
16 Amperage Rating 60% Duty Cycle CO 2 Shielding Gas 300 A Net W eight 9 - 12 lbs. (4.0 - 5.4 kg) Wire Diameter Range .025” - 5/64” (0.6 mm - 2.0 mm).
300 300 amps Select a Gun for Y our Application S T E P 2 This popular Magnum gun is intended for most .035–.045” wire diameter applications in job shops, pr oduction or manufacturing. Standard equipment on the current Lincoln Power MIG ® 350MP wire feeder/welder .
18 Choose a Gun Connector S T E P 3 MFG. WIRE FEEDER MODEL CONNECTOR KITS FOR ST ANDARD GUNS F ASTMA TE ™ ADAPTER KITS FM GUNS Lincoln T weco ® Adapted Hobart ® ESAB ® Miller ® Single Procedure .
K489-1, 2, 3, 4, 5, 7, 8 2 1b 1a 4a 4b 3a 3b 3c K466-1 K466-2 K466-3 K466-4 K466-5 K466-6 K466-7 K466-8 K466-10 1a 1b 4a 4b 1a 4a 4b 1c 1b 1a 4a 4b 3b 1b 1c 2 2 3a 3c 2 1 4a 4b 2 1 4b 4a 2 1 4b 4a 2 1.
TIP Standard Duty Heavy Duty Tapered 10 Bulk 10 Bulk 10 Bulk 10 Bulk Notched (Alum.) QTY. WIRE DIAMETER .025" (0.6mm) .030" (0.8mm) .035" (0.
NOZZLE QTY . NOZZLE DIAMETER (1) Requires KP34A, Nozzle Insulator Assembly (2) Requires KP34CT , Nozzle Insulator Assembly 1 = Qty . in pack Bulk = Qty . of 25 Adjustable Slip-on (1) Nozzle Recessed Slip-on (1) Nozzle Coarse Thread (2) Nozzle Tip Recessed 1/8" (3.
22 TUBE 45º 60º 82º 10 Bulk 10 Bulk 10 Bulk QTY . RA TED (AMPS) 300 400 NOTE: 300 & 400 amp gun tubes can be used with 200 amp guns. Use corresponding amperage gas diffuser , nozzle, and nozzle insulator .
LINER 1 Bulk 1 Bulk QTY . DIAMETER Cable Liner (300 amps) Continued LINER 1 Bulk 1 Bulk QTY . DIAMETER (1) A KP2024-1 Gas Diffuser is required when using a KP44-564-15 Cable Liner in a non-Magnum gun. (2) Recommended for aluminum wire welding. Recommended maximum cable length is 10 ft.
24 ST ART WELDING... ...STOP TINKERING GRAB THE Industr y's Best... PRODUCTUVITY • No assembly , no mistakes. • Designed to maximize feedability and keep you welding. • 100% field serviceable. EASE-OF-USE • Interchangeable components and one of the industry’ s widest array of parts.
GUN WIRE DIAMETER GUN CONNECTOR GUN CONNECTOR GUN CONNECTOR Open- End Fast- Mate Gun Package Open- End Fast- Mate Gun Package Open- End Fast- Mate Gun Package Wire Feeder Connector: - Open-End: Feeder end of the gun is open. A separate Gun Connector Kit is required.
Choose a Gun Feeder Connector S T E P 3 CONNECTOR KITS FOR ST ANDARD GUNS F ASTMA TE ™ ADAPTER KITS FOR FM GUNS Single Procedure Dual Procedure/ Dual Schedule Dual Procedure/ Dual Schedule Single Procedure — See note 1 K466-10 — — K573-1 K489-7 — MFG.
K489-1, 2, 3, 4, 5, 7, 8 2 1b 1a 4a 4b 3a 3b 3c K466-1 K466-2 K466-3 K466-4 K466-5 K466-6 K466-7 K466-8 K466-10 1a 1b 4a 4b 1a 4a 4b 1c 1b 1a 4a 4b 3b 1b 1c 2 2 3a 3c 2 1 4a 4b 2 1 4b 4a 2 1 4b 4a 2 1.
TIP Standard Duty Heavy Duty T apered 10 Bulk 10 Bulk 10 Bulk 10 Bulk Notched (Alum.) QTY . WIRE DIAMETER .025" (0.6mm) .030" (0.8mm) .035" (0.
NOZZLE QTY . NOZZLE DIAMETER (1) Requires KP34A, Nozzle Insulator Assembly (2) Requires KP34CT , Nozzle Insulator Assembly 1 = Qty . in pack Bulk = Qty . of 25 Adjustable Slip-on (1) Nozzle Recessed Slip-on (1) Nozzle Coarse Thread (2) Nozzle Tip Recessed 1/8" (3.
TUBE 45º 60º 82º 10 Bulk 10 Bulk 10 Bulk QTY . RA TED (AMPS) 300 400 NOTE: 300 & 400 amp gun tubes can be used with 200 amp guns. Use corresponding amperage gas diffuser , nozzle, and nozzle insulator .
LINER 1 Bulk 1 Bulk QTY . DIAMETER Cable Liner (400 amps) Continued LINER 1 Bulk 1 Bulk QTY . DIAMETER (1) A KP2024-1 Gas Diffuser is required when using a KP44-564-15 Cable Liner in a non-Magnum gun. (2) Recommended for aluminum wire welding. Recommended maximum cable length is 10 ft.
32 Amperage Rating 60% Duty Cycle CO 2 Shielding Gas 550 A Net W eight 12 -23 lbs. (5.4 10.4 kg) Wire Diameter Range .052” - 1/8” (1.3 mm - 3.2 mm).
33 Select a Gun for Y our Application S T E P 2 Choose our 550 gun equipped with 500 or 600 amp consumables for high amperage, large wir e diameter welding, including up to .052” and .062” MIG or 3/32–1/8” Outershield ® or UltraCore™ (gas-shielded flux-cor ed) applications.
34 Choose a Gun Connector Magnum 550 (500 & 600 amps) S T E P 3 MFG. WIRE FEEDER MODEL CONNECTOR KITS FOR ST ANDARD GUNS Lincoln T weco ® Adapted Hobart ® Miller ® LN-7 Series, LN-8, LN-9 Series (Up to .052" (1.4 mm) Wire) LN-8, LN-9 Series, (1/16" (1.
35 550 500 & 600 amps 2 1b 1a 4 3b 3a K613-1 K613-2 K613-3 K613-4 K613-5 K613-6 K613-7 3c 1 3 4 2 3c 4 1c 1b 1a 4 3b 1c 1b 2 3a 3c 1a 1b 4 2 1 4 3b 3c 3a 2 1 4 2 Gun Connector Included Parts.
36 Choose Y our Consumables Magnum 550 (500 amps) S T E P 4 TIP Flux- Cored, Heavy Duty Solid Wire, Heavy Duty 10 Bulk 10 Bulk QTY . WIRE DIAMETER .035" (0.
Diffuser Standard Tip Recessed 3/32" (2.4mm) Tip Recessed 3/16" (4.8mm) Tip Recessed 5/8" (15.9mm) 1 Bulk 1 Bulk 1 Bulk 1 Bulk QTY . WIRE DIAMETER .035"–1/16" (0.9–1.6mm) 1/16"–5/64" (1.6–2.0mm) 3/32"–1/8" (2.
38 60º Gun T ube 5º Bend 60º GUN TUBE 5º bend Radius 10 Bulk QTY . RA TED (AMPS) 500 10 = Qty . in pack Bulk = N/A KP1951-3 — — — Gun T ubes /550 Model (500 amps) LINER 1 Bulk 1 Bulk QTY . DIAMETER (1) For use with aluminum wire. Recommended maximum cable length is 10 ft.
Choose Y our Consumables Magnum 550 (600 amps) S T E P 4 Contact Tips (600 amps) Continued TIP Heavy Duty 10 Bulk QTY . WIRE DIAMETER .035" (0.9mm) .
WIRE DIAMETER .035–.1/16" (0.9–1.6mm) 5/64–.1/8" (2.0–3.2mm) Diffuser Gas Diffuser Assembly 1 Bulk QTY . KP56S-SW KP2057-1 KP56S-H KP2057-2 KP56S-SW-B10 KP2057-1B1 KP56S-H-B10 KP2057-2B1 10 = Qty . in Pack Bulk = Qty . of 10 Gas Diffuser (600 amps) Part Number Previous Part Number 40 LINER 1 Bulk 1 Bulk QTY .
41.
Amperage Rating 60% Duty Cycle CO 2 Shielding Gas 100 A Net W eight 9 - 12 lbs. (4.0 - 5.4 kg) Wire Diameter Range .025” - .045” (0.6 mm - 1.2 mm) 42.
43 Extremely small, lightweight gun that's gr eat for most home, farm and small shop projects, auto-body work and light maintenance or repair applications. Standar d equipment on current Lincoln SP-135T and SP-175T , Power MIG ® 140T , 140C, 180T and 180C.
Choose Y our Consumables S T E P 3 44 TIP Standard Duty T apered 10 Bulk 10 Bulk QTY . WIRE DIAMETER .025" (0.6mm) .030" (0.8mm) .035" (0.
LINER 1 Bulk QTY . DIAMETER (1) Recommended for aluminum wire welding. Recommended maximum cable length for aluminum is 10 ft. (3.0m). 1 = Qty . in Pack Bulk = Qty . of 10 KP1937-3 — .025"–.035" (0.6–0.9 mm) Aluminum .035" (1) (0.
46 Amperage Rating 60% Duty Cycle CO 2 Shielding Gas 250 A Net W eight 8 lbs. (3.6 kg) Wire Diameter Range .025” - .045” (0.6 mm - 1.2 mm).
47 Recommended for medium duty job shop and production applications. Standard equipment on the curr ent Lincoln Power MIG 215 and Power MIG ® 255C wire feeder/welders.
TIP Standard Duty Heavy Duty Tapered 10 Bulk 10 Bulk 10 Bulk 10 Bulk Notched QTY. WIRE DIAMETER .025" (0.6mm) .030" (0.8mm) .035" (0.9mm) .
Diffuser 1 Bulk 1 Bulk QTY. WIRE DIAMETER .025–.030" (0.6–0.8mm) .035–.045" (.09–1.2mm) KP52-25 KP2026-2 KP52 KP2026-1 KP52-25-B25 KP2026-2B1 KP52-B25 KP2026-1B1 KP2051-1 — KP2026-3 — — — — — 1 = Qt y . in Pack Bulk = Qt y .
50 LINER 1 Bulk QTY . DIAMETER (1) Recommended for Aluminum wire welding. Recommended maximum cable length for aluminum is 10 ft. (3.0m). 1 = Qty . in Pack Bulk = Qty . of 10 KP42-25-15 KP1934-2 .025"–.030" (0.6–0.8 mm) Aluminum .035"–.
MACHINE GUN P ART NUMBER Power MIG 140C/140T Magnum 100L Power MIG 180C/180T Magnum 100L Power MIG 200 Magnum 250L Power MIG 215 Magnum 250L Power MIG 255 Magnum 250L Power MIG 255C Magnum 250L Power .
The Lincoln Electric Company 22801 St. Clair Avenue Cleveland, Ohio 44117-1199 P: 216-481-8100 F: 216-486-1751 www .lincolnelectric.com CUSTOMER ASSIST ANCE POLICY The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment.
Ein wichtiger Punkt beim Kauf des Geräts Lincoln Electric Magnum (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lincoln Electric Magnum noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lincoln Electric Magnum - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lincoln Electric Magnum reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lincoln Electric Magnum erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lincoln Electric Magnum besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lincoln Electric Magnum verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lincoln Electric Magnum. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lincoln Electric Magnum gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
