Benutzeranleitung / Produktwartung LDX-3232 des Produzenten Lightwave Communications
Zur Seite of 118
User’ s Guide LDX-3232 High Compliance Current Source 70037800_R01_04_06 ILX Lightwa ve Corporation · P . O . Box 6310 · Boz eman, MT , U .S.A. 59771 · U .S. & Canada: 1-800-459-9459 · International Inquir ies : 406-556-2481 · F ax 406-586-9405 ilx.
.
T ABLE OF CONTENTS 04_06 LDX -3232 i T ABLE OF C ONTENTS Safety Information and the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix General Safety Considerat ions .
T ABLE OF CONTENTS ii LDX -3232 Connecting to the Laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Interlock Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T ABLE OF CONTENTS 04_06 LDX -3232 iii Chapter 4 Command Reference LDX-3232 Device-Dep endent Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 LDX-3232 Device-Dep endent Command Reference . . . . . . . . . . . . . . . . . . . . 40 Chapter 5 Functions and Features Saving and Recalling from the Front Panel .
T ABLE OF CONTENTS iv LDX -3232 .
LIST OF FIGURES 04_06 LDX -3232 v L IST OF F IGURES Figure 1.1 LDX-3232 Fron t View . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Figure 1.2 LDX-3232 Rear View . .
LIST OF FIGURES vi LDX -3232 .
LIST OF T ABLES 04_06 LDX -3232 vii L IST OF T ABLES T able 2.1 LDX-3232 Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . 10 T able 2.2 LDX-3232 Error Indicators .
LIST OF T ABLES viii LDX -3232 .
SAFETY AND W ARRANTY INFORMATION 04_06 LDX -3232 ix S AFETY AND W ARRANTY I NFORMATION The Safety and W arranty Information section provides details about cautio nary symbols used in the manual, safety markings used on th e instrument, and information about the W arranty including Customer Service contact informa tion.
SAFETY SYMBOLS x LDX -3232 All instruments returned to ILX Lightwave are required to have a Retu rn Authorization Nu mber assigned by an of ficial represent ative of ILX Lightwave Corporation. See Returning an Instrume nt on page xi for more in formation.
WA R R A N T Y 04_06 LDX -3232 xi W ARRANTY ILX LIGHTW A VE CORPORA TION warrants th is instrument to be free from defects in materia l and workmanship for a period of one year from date of shipment. During the warranty period, ILX will repa ir or replace the unit, at our option, without charge.
WA R R A N T Y xii LDX -3232 6 Send the instrument, transportation pre-paid, to ILX Lightwave. Clearly write the return authorization number on the outside of the box and on the shippi ng paperwork. ILX Lightwave recommends you insure the shipment.
WA R R A N T Y 04_06 LDX -3232 xiii Comments, Suggestio ns, and Problems T o ensure that you get the most out of your ILX Lightwave product, we ask that you direct any product operation or servic e related questions or comment s to ILX Lightwave Customer Support.
WA R R A N T Y xiv LDX -3232 in a container with at least 3 in ches (7 .5 cm) of compressible packa ging material on all sides. We loo k forward to serving you even better in the fut ure!.
INTRODUCTION AND SPECIFICATIONS Product Overview 04_06 LDX -3232 1 CHAPTER 1 CHAPT ER 1 I NTRODUCTION AND S PECIFICATIONS This chapter is an in troduction to the LDX-3232 Hig h Compliance Current Source.
INTRODUCTION AND SPECIFICATIONS Initial Inspection 2 LDX-3232 CHAPTER 1 Initial Inspection When you receive your LDX-323 2 instrument, verify that the followin g items were shipped with the instru.
INTRODUCTION AND SPECIFICATIONS Installing Y our LDX-3232 High Compliance Current Source 04_06 LDX -3232 3 CHAPTER 1 GPIB Connector The IEEE 488 GPIB interface connector is located on the rear p anel, directly above the power input module an d fuse.
INTRODUCTION AND SPECIFICATIONS Installing Y our LDX -3232 High Compliance Current Source 4 LDX-3232 CHAPTER 1 Figure 1. 1 LDX-3232 Front View Figure 1.
INTRODUCTION AND SPECIFICATIONS Maintenance 04_06 LDX -3232 5 CHAPTER 1 Maintenance Y ou may have to return yo ur instrument to th e ILX Ligh twa ve facility at some time for repair or service whether or not it is under wa rranty . There is a charge for repairs af ter the warranty period ha s expired.
INTRODUCTION AND SPECIFICATIONS Specifications 6 LDX-3232 CHAPTER 1 Specifications LDX-3232 Drive Current Output 1 Output Current Ra nge 0 to 2000 mA 0 to 4000 mA Setpoint Resolution 2 40 µA 80 µA Setpoint Accuracy (% of FS) ±0.
INTRODUCTION AND SPECIFICATIONS Specifications 04_06 LDX -3232 7 CHAPTER 1 Notes 1. All values relate to a one-hour warm-up pe riod at room temperature, 25 °C. 2. Based on resolut ion of digi tal-to-analo g converters use d in the desig n. 3. Over any 1-hour pe riod, half-scale out put.
INTRODUCTION AND SPECIFICATIONS Specifications 8 LDX-3232 CHAPTER 1 8. Maximum monitor photodiode cu rrent drift over any 30 minut e per iod. Assumes zero drif t in responsivity of photo diode. 9. 50% modulation at mid- scal e output. Higher bandwid th is possible with smaller magnitude modulat ion signal.
OPERATION Applying P ower to Y our LDX-3232 04_06 LDX -3232 9 CHAPTER 2 CHAPT ER 2 O PERATION This chapter introduces you to the ope ration of the LDX-3232 High Compliance Current Source.
OPERATION Connecting to the Laser 10 LDX -3232 CHAPTER 2 The Power On State Y ou can choose to "clear" the last saved st ate by recalling the default values. These values are stored in BINS to that you can save or recall instrument configurations (described in more de tail in Chapter 5).
OPERATION Connecting to the Laser 04_06 LDX -3232 11 CHAPTER 2 grounds in the circuit. Multiple earth grounds may provide circuit paths that indu ce spurious currents in the photodiode feedb ack circuit and output leads.
OPERATION Connecting to the Laser 12 LDX -3232 CHAPTER 2 Figure 2.4 Common Laser Anode - Pho tod iode Anode The 9-pin connector marked CURRENT SOUR CE on the back panel is used to connect your laser diode to the LDX-3232. The re are connections provided for laser cathode and anode, photodiod e cathode and anode, chassis ground and interlock.
OPERATION Connecting to the Laser 04_06 LDX -3232 13 CHAPTER 2 Photodiode Connections Many laser diode modules cont ain an int ernal photodiode that monitors th e back- facet emission of the laser . Usually , this photodiode is internally connected to either the laser anode or cathode.
OPERATION Fr o n t Pa n e l O p e r a t i o n 14 LDX -3232 CHAPTER 2 Front Panel Operation This section describes fundament als of operation for you r LDX-3232 in two operating modes: Con stant Current (I) an d Constan t Power (P).
OPERATION Operating a Laser in Constant Current (I) Mode 04_06 LDX -3232 15 CHAPTER 2 Setting Up the Precision Current Source Set the LDX-3232 in Const ant Current, low bandwid th mode by selecting I in the MODE section of th e front panel. Do this by toggling the SELECT push button until the I indicator is illuminated.
OPERATION Operating a Laser in Co nstant Current (I) Mode 16 LDX -3232 CHAPTER 2 T o set the current source limit, use the SELECT push button in the P ARAMETER section of the front panel to select LIM I. Press and hold the (P ARAMETER) SET push button and rotate the adjust knob to vary the limit setpo int value.
OPERATION Operating a Laser i n Constant P ower (P) Mode 04_06 LDX -3232 17 CHAPTER 2 Conditions That Will Automatic ally Shut Off th e LASER OUTPUT The following conditions will au tomatically ca.
OPERATION Operating a Laser in Co nstant Po wer (P) Mode 18 LDX -3232 CHAPTER 2 A method to calculate the responsivity is sugge sted below . 1 Measure (with a calibrated detecto r) the output power of the device. 2 Measure the corresponding photodiod e current.
OPERATION Error Indica tors 04_06 LDX -3232 19 CHAPTER 2 Now the instrument is config ured to operate in Const ant Power Mode. In the MODE section , enable th e output of the laser current source by depressing the OUTPUT push button once.
OPERATION Error Indicators 20 LDX -3232 CHAPTER 2 .
REMOTE OPERATION 04_06 LDX -3232 21 CHAPTER 3 CHAPT ER 3 R EMOTE O PERATION Everything you learned to do from th e front pan el can also be done remotely and in some cases, with more flexibility .
REM O TE O P ER A TI O N LDX -3232 Current Source Command Set 22 LDX -3232 CHAPTER 3 Changing Operation from Local to Remote Sending a command over the GPIB will automatically p ut the instrument in REMOTE mode. The REMOTE indicator will identify when the Current Source is in remote operation mode.
REMOTE OPERATION LDX -3232 Current Source Command Set 04_06 LDX -3232 23 CHAPTER 3 The syntax of the LDX-3232 High Compliance Current Source comman ds fo llows the rules laid out in the GPIB-IEEE488 standard. Colon s (:) indicate the start of a new command pa th, while semicolons (;) indicate a separation of commands within a command string.
REM O TE O P ER A TI O N LDX -3232 Current Source Command Set 24 LDX -3232 CHAPTER 3 If multiple pa rameters are expecte d, they should be sepa rated with commas: LAS:INC 100,50 A query has no sp .
REMOTE OPERATION Command P aths 04_06 LDX -3232 25 CHAPTER 3 Command Paths The LDX-3232 High Compliance Current Source device-dep endent commands are structured into a tree format (see Figure 3.1). Each of the le gal paths is liste d below , followed by its list of p ath options, each of that is followed by the commands themselves.
REM O TE O P ER A TI O N IEEE488.2 Command Commands 26 LDX -3232 CHAPTER 3 IEEE488.2 Command Commands The IEEE488.2 Common Commands and Queries are distin guished by the "*" that begins each mnemonic.
REMOTE OPERATION LDX -3232 F requently U sed Commands 04_06 LDX -3232 27 CHAPTER 3 LDX-3232 Frequently Used Commands The LDX-3232 High Compliance Current Source’ s complete command set contains over 60 commands that allow you to operate the current source f or a variety of applications.
REM O TE O P ER A TI O N Status Reporting 28 LDX -3232 CHAPTER 3 Status Reporting This section contain s information that is relevant for un derstand ing instrument error and statu repo rting. It also cont ains information regarding the use o f the instrument status for gen erating interrupt s for interrupt driven programs o r subroutines.
REMOTE OPERATION Status Reporting 04_06 LDX -3232 29 CHAPTER 3 For example, the user may turn the current source on ( LAS:O UT 1 ), enable an SRQ on Operation Comp lete (set *ESE 1 and *SRE 5 ), and have an SRQ handling routine in the user's sof tware, that reads a new measurement af ter the output on st ate has been reached.
REM O TE O P ER A TI O N Status Reporting 30 LDX -3232 CHAPTER 3 Output Off Register The Output Of f Enable Register allows you to determine that conditions and events in the LDX-3 232 High Compliance Current Source ca n cause the current source output to be turned of f.
REMOTE OPERATION Status Reporting 04_06 LDX -3232 31 CHAPTER 3 r Figure 3.3 LDX-3232 Outpu t Off Register 0 - LASER Current Limit 8 - N/A 1 - LASER V oltage Limit 9 - LASER Output Changed to be Ou.
REM O TE O P ER A TI O N Command T iming and Completion 32 LDX -3232 CHAPTER 3 Command Timing and Completion This section describes, for each de vice-dependent command, whether tha t command is performed in an overlapped or sequential manner .
REMOTE OPERATION Error Mess ages 04_06 LDX -3232 33 CHAPTER 3 (up to 10 may be stored). Reading the erro r queue via GPIB clears the error queue. T able 3.
REM O TE O P ER A TI O N Error Messages 34 LDX -3232 CHAPTER 3 Error Code Explanation E-501 LASER interlock disabled output E-503 LASER open circ uit disabled output E-504 LASER current lim it dis.
COMMAND REFERENCE 04_06 LDX -3232 35 CHAPTER 4 CHAPT ER 4 C OMMAND R EFERENCE This chapter is a guide to all of t he d evice-dependent commands for the LDX-3232 High Compliance Current Source.
COMMAND REFERENCE 36 LDX -3232 CHAPTER 4 Name Parameters Function LAS:CAL:MDI? NONE Returns the ready state for entering the monitor photodiode current calibration value LAS:COND? NONE Returns the.
COMMAND REFERENCE 04_06 LDX -3232 37 CHAPTER 4 Name Parameters Function LAS:LIM:I2 1 Used to set the LASER low range current source limit LAS:LIM:I2? NONE Used to return the LASER low range curren.
COMMAND REFERENCE 38 LDX -3232 CHAPTER 4 Name Parameters Function LAS:TOL? NONE Used to return the LASER setpoint tolerance value and time period value MES 1 Used to enter a string message of up t.
COMMAND REFERENCE LDX -3232 Device-Dependent Commands 04_06 LDX -3232 39 CHAPTER 4 LDX-3232 Device-Dependent Commands This section contain s all of the dev ice-dependent commands for the LDX-3232 High Compliance Current Source, listed in alphabetical ord er .
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 40 LDX -3232 CHAPTER 4 LDX-3232 Device-Dependent Command Reference The following pag es contain a refere nce for the device-depend ent commands of the LDX-3232 High Compliance Current Source.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 41 CHAPTER 4 The ERRors? query returns a list of comm and and devi ce errors that have occurred since the last query . These errors are notated by a n umber that corresponds to the type of error that occurred.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 42 LDX -3232 CHAPTER 4 The LASer:CALMD? query returns the valu e of the laser's photod iode feedback responsivity (CAL PD parameter) setting.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 43 CHAPTER 4 The LASer:CAL:LDI command is used to enter the LASER current setpoint, measurement, and limit (in low bandwidth mode) calibration mode.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 44 LDX -3232 CHAPTER 4 The LASer:CAL:LDI? query is used to determine that the LDX-3232 is ready for a value to be entered during the calibrat ion cycle of the L ASer:CAL:LDI mode.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 45 CHAPTER 4 The LASer:CAL:LDV? query is used to determine tha t the LDX-3232 is ready for a value to be entered during the calibrat ion cycle of the LASer:CAL:LDV mode.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 46 LDX -3232 CHAPTER 4 The LASer:CAL:MDI? query is used to determi ne that the LDX-323 2 is ready for a value to be entered during the calibrat ion cycle of the LASer:CAL:MDI mode.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 47 CHAPTER 4 Circuit conditio n is fleeting and may be missed via the LAS:COND? que ry . Therefore, the user should test for the Open Circuit Event via the LAS:EVEnt? query .
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 48 LDX -3232 CHAPTER 4 The LASer:DIS play command enables or disables (turns off) the display and some LEDs Syntax Diagram Parameters An <nrf value> ; -where 1 = on, 0 = of f.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 49 CHAPTER 4 The LASer:DIS play:LDI command sets the lase r display to show th e const ant current measurement. Syntax Diagram Parameters None. Notes Th e LDI measurement displ ay mode is turned off automatically when another display selection is enabled.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 50 LDX -3232 CHAPTER 4 The LASer:DIS play:LDV command sets the laser display to show the laser forward voltage measurement. Syntax Diagram Parameters None Notes Th e LDV me asurement mode is turned off automatically when another display selection is enabled.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 51 CHAPTER 4 The LASer:DIS play:MDI command sets the laser display to sho w the monitor photodiode current measurement. Syntax Diagram Parameters None Notes Th e MDI measurement display is turned off automatically when anot her display selection is enabled.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 52 LDX -3232 CHAPTER 4 The LASer:DIS play:MDP command sets the display to show the monitor photodiode power measurement. Syntax Diagram Parameters None Notes Th e MD P measurement display is turned off automatically when another display selection is enabled.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 53 CHAPTER 4 The LASer:DIS play:P ARAM command enables the display to show the parameter values. Syntax Diagram Parameters None Notes Th is co mmand has the same effect as pressing the (P ARAM ETER) SELECT switch while in LASER mode.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 54 LDX -3232 CHAPTER 4 The LASer:DIS play:SET? query returns the status of the setpoint display mode. Syntax Diagram - where the response is 0 or 1. Notes Th e setp oin t display will not time out when REMOTE operation is used.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 55 CHAPTER 4 Examples "LAS:ENAB:COND 129" -action: enables the LASER status conditio n register so that the Open circuit and LASER current limit conditions will be summariz ed in the status byte (bit 3).
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 56 LDX -3232 CHAPTER 4 The LASer:ENABle:EVEnt command sets the st at us event enable r egister of the LASER operations. These events are summarized in bit 2 of the status byte register .
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 57 CHAPTER 4 The LASer:ENABle:EVEnt? query returns the value of the status event enable register of the LASER operations.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 58 LDX -3232 CHAPTER 4 The LASer:ENABle:OUTOFF command sets the status outoff enable register of the LASER operations (things that will turn the LASER output off).
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 59 CHAPTER 4 . The LASer:ENABle:OUTOFF? query returns the va lue of the status outoff enable register of the LASER operation s.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 60 LDX -3232 CHAPTER 4 The LASer:EVEnt? query returns the value of the status event register of the LASER operations.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 61 CHAPTER 4 The LASer:INC command increments the selected laser control mo de setpoint by one or more steps. Optional parameters allow multiple steps to be incremented and the time (i n ms) between increments to be set, respectively .
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 62 LDX -3232 CHAPTER 4 The LASer:LDI command sets the laser control current. Syntax Diagram Parameters An <nrf value> that represents the (laser) output current i n mA. Notes s etpoi nt is the same for both low and hi gh ban dwidth output modes.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 63 CHAPTER 4 The LASer:LDV command sets the laser voltage for calibration of the laser voltage measurement. Syntax Diagram Parameters An <nrf value> th at represents the (laser) output voltage, in volts.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 64 LDX -3232 CHAPTER 4 The LASer:LIMit:I2 command sets the LASER current limit value for the 2000 mA range on the LDX-3232. Syntax Diagram Parameters An <nrf value> that repre s e n t s the LASER l im it curre nt , in m A.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 65 CHAPTER 4 The LASer:LIMit:I4 command sets the LASER current limit value for the 4000 mA range on the LDX-3232. Syntax Diagram Parameters An <nrf value> that repre s e n t s the LASER l im it curre nt , in m A.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 66 LDX -3232 CHAPTER 4 The LASer:LIMit:MDP command sets the laser monitor photodiode pow er limit value. Syntax Diagram Parameters An <nrf value> that represents the laser monitor photodiod e power limit in mW .
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 67 CHAPTER 4 The LASer:LIMit:V command set s the LASER comp liance voltage limit value. Syntax Diagram Parameters An <nrf value> that represents the LASER limit voltage, in volts.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 68 LDX -3232 CHAPTER 4 The LASer:MDI command sets the val ue of the optical power setpoint, in µ A, if the CALMD (CAL PD) responsivity is 0. Syntax Diagram Parameters An <nrf value> that represents the photodiode feedback current, in µA.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 69 CHAPTER 4 The LASer:MDLN command enable s or disables (turns off) the front panel modulation input (BNC). Syntax Diagram Parameters An <nrf value> - where 1=on, 0=off.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 70 LDX -3232 CHAPTER 4 The LASer:MDP command sets the value of the optical power setpoint in mW if the CALMD (CAL PD) responsivity is greater than 0. Syntax Diagram Parameters An <nrf value> that represents the photodiode feedback power in mW .
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 71 CHAPTER 4 The LASer:MODE? query returns t he selected laser co ntrol mode. Notes I HBW mode is the same as I mode (low bandwid th), except th at the outp ut low bandpass filter is disabled in I HBW mo de.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 72 LDX -3232 CHAPTER 4 The LASer:MODE:ILBW command select s laser constant current mode. Parameters None Notes Con stant I mode (low bandwidth) enables the output low bandpass filter .
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 73 CHAPTER 4 The LASer:OUTput command turns the laser output on or off. Parameters An <nrf value> ; 1=on, 0=of f. Notes Th ere is a two-second delay after the output is turned on befo re the output shorting rela y is opened.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 74 LDX -3232 CHAPTER 4 The LASer:RANge command selects the laser's drive current output range.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 75 CHAPTER 4 The LASer:SET :LDI? query returns the const ant I value that is used for both output ranges and both bandwidths. - where the response is the constant I setpoint value, in mA.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 76 LDX -3232 CHAPTER 4 "LAS:Set:MDI?" -response: 100.0 means the laser mo nitor photodiode current is setpoint is 100 µ A, for use in constant P mode with CALMD=0.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 77 CHAPTER 4 The LASer:STEP? query is used to read back the LASer STEP val ue. This value is used to increment or decrement the selected lase r control mode setpo int by the given a mount when used with the LASer:INC or LASer:DEC command.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 78 LDX -3232 CHAPTER 4 The LASer:TOLerance? query allows the programmer to determine how the LASER current tolerance is set. - where the response consists of two values, the first is the current tolerance in mA and the second is the time window , in seconds.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 79 CHAPTER 4 The MESsage? query returns the previously stored me ssage. Th is message will always be 16 bytes long and enclosed in quotes. The message is entered via the MESsage command.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 80 LDX -3232 CHAPTER 4 "rad hex; *ESR?" -action: the hexadecimal radix is selected; -response: #H80, means power-on was detected.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Reference 04_06 LDX -3232 81 CHAPTER 4 The TERM? query allows the programm er to determine whether th e default (IEEE488.2 standard) terminator has been altered to include a carriage return. - where the response is 0 or 1.
COMMAND REFERENCE LDX -3232 Device-Dependent Command Refere nce 82 LDX -3232 CHAPTER 4 The TIMER? query allows the programmer to determine ho w much time has passed since the last TIMER? query was issued. - where the response is character data that represents hours:minutes:seconds.
F UNCTIONS AND F EATURES Saving and Rec alling from the F ront P anel 04_06 LDX -3232 83 CHAPTER 5 CHAPT ER 5 F UNCTIONS AND.
F UNCTIONS AND F EATURES Saving and Recalli ng Under Remote Operation 84 LDX -3232 CHAPTER 5 T o recall a previously saved instrument setup, press the SELECT switch until the RECALL indicator led become s lit. The instrument will display a RECALL "bin" number on the display .
F UNCTIONS AND F EATURES Using the LDX -3232 Current Source’s T rigger F unction 04_06 LDX -3232 85 CHAPTER 5 Using the LDX-3232 Current Source’s Trigger Function For applications where you ne.
F UNCTIONS AND F EATURES Using the LDX -3232 Current Sources’s BNC Interlock Connection 86 LDX -3232 CHAPTER 5 Using the LDX-3232 Current Sources’s BNC Interlock Connection The LDX-3232 BNC interlock connection is designed to allow an external emergency input signal t o turn the current output of f.
F UNCTIONS AND F EATURES Modulating the Laser Current Source 04_06 LDX -3232 87 CHAPTER 5 Setting up the Current Source for a modulated laser inject ion current is easy . The (MOD) EXTERNAL connector (BNC) on the front panel is the input for the modula ted signal.
F UNCTIONS AND F EATURES Modulating the Laser Current Source 88 LDX -3232 CHAPTER 5 T o disable the output, press the OUTPUT push button aga in. When the LDX-3232 current output is of f, an internal short is placed across the output. T his short will prevent the modulation signal f rom reac hing the LED in our example experiment.
CALIBRATION AND TROUBLESHOOTING Calibration Over view 04_06 LDX -3232 89 CHAPTER 6 CHAPT ER 6 C ALIBRATION AND T ROUBLESHOOTING This chapter describes calibration of your LDX-3232 Serie s Current Source.
CALIBRATION AND T ROUBLESHOOTING Recommended Equipm ent 90 LDX -3232 CHAPTER 6 Finally , the LDX-3232 Current Source should be allowed to warm up for at least one hour before calibration. Recommended Equipment Recommended test equipment for calibrating the L DX-3232 Current Source is listed in T able 6.
CALIBRATION AND TROUBLESHOOTING Local Calibration of the LDX-3232 Current Source 04_06 LDX -3232 91 CHAPTER 6 Figure 6.1 I PD Calibrati on Circuit Local Calibration of th e LDX-3232 Current Source There are three calibration adjustments required for the LASER current source of the LDX-3232 Current Source.
CALIBRATION AND T ROUBLESHOOTING Local Calibration of the LDX -3232 Current Source 92 LDX -3232 CHAPTER 6 a. Measure and record the resistance of a 1 Ω , 20 W resistor (A 4-wire [Kelvin] resistance measurement is recommended .
CALIBRATION AND TROUBLESHOOTING Local Calibration of the LDX-3232 Current Source 04_06 LDX -3232 93 CHAPTER 6 LDX-3232 Series Current Source then automatically calibrates the LASER feedback circuit s. Configure the Current Source in th e following manner for the Laser Current Source calibration: a.
CALIBRATION AND T ROUBLESHOOTING Local Calibration of the LDX -3232 Current Source 94 LDX -3232 CHAPTER 6 g. Release the (P ARAMETER) SET switch to acc ept the second calibration point.
CALIBRATION AND TROUBLESHOOTING Remote Calibration of the LDX -3232 Current Source 04_06 LDX -3232 95 CHAPTER 6 Remote Calibration of the LDX-3232 Current Source The LDX-3232 Current Sources can be calibra ted remotely via the GPIB Interface. All of the require d calibration command s are listed in T able 4.
CALIBRATION AND T ROUBLESHOOTING Remote Calibration of the LDX -3232 Current Source 96 LDX -3232 CHAPTER 6 a. Measure and record the resistance of a 1 Ω , 20 W resistor .
CALIBRATION AND TROUBLESHOOTING Remote Calibration of the LDX -3232 Current Source 04_06 LDX -3232 97 CHAPTER 6 Configure the current source in the following man ner for the laser current sour ce calibration: a.
CALIBRATION AND T ROUBLESHOOTING Remote Calibration of the LDX -3232 Current Source 98 LDX -3232 CHAPTER 6 Laser Forward Voltage Measurement Calibration The following procedure is for calibr ating the LASER volt age measurement. Configure the current source in the following man ner for the laser current sour ce voltage calibration: a.
CALIBRATION AND TROUBLESHOOTING T roubleshooting Guide 04_06 LDX -3232 99 CHAPTER 6 Troubleshooting Guide This section is a guide to troubleshooting th e LDX-3232 Current Sources. Some of the more common symptoms are listed here, and the ap propriate troubleshooting actions are given.
CALIBRATION AND T ROUBLESHOOTING T roubleshooting Guide 100 LDX -3232 CHAPTER 6 Symptom Corrective Actions Unable to adjust output Check the I LIMIT pa rameter for the output range in use, see that it is set above 0 mA.
CALIBRATION AND TROUBLESHOOTING Error Mess ages 04_06 LDX -3232 101 CHAPTER 6 Error Messages In the event of a hardware error co ndition, error messages will be displayed on the display . In most cases, the error message will appear for three seconds.
CALIBRATION AND T ROUBLESHOOTING Error Messages 102 LDX -3232 CHAPTER 6 Error Code Explanation E-203 Security violation, command is not available witho ut clearance E-205 <PROGRAM DA T A> is.
Ein wichtiger Punkt beim Kauf des Geräts Lightwave Communications LDX-3232 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lightwave Communications LDX-3232 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lightwave Communications LDX-3232 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lightwave Communications LDX-3232 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lightwave Communications LDX-3232 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lightwave Communications LDX-3232 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lightwave Communications LDX-3232 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lightwave Communications LDX-3232. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lightwave Communications LDX-3232 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
