Benutzeranleitung / Produktwartung 26-3DCH-UA des Produzenten LG Electronics
Zur Seite of 52
Commer cial Mode Setup Guide Note: All features shown within this guide may not be available on all models. © Copyright 2008, LG Electronics U.S.A., Inc.
RECORD Model and SERIAL NUMBER The model and serial number of this TV is located on the back of the cabinet. For future reference, we suggest that you record those numbers here: Model No._________________Serial No. _______________ W ARNING: T O REDUCE THE RISK OF ELECTRI C SHOCK DO NO T REMOVE COVER (OR B ACK).
S AFETY INSTRUCTIONS Important safeguards f or you and your ne w product This prod uct has been man ufactured an d tested with safety in mind. H owever , improper use can r esult in potential electri cal shock or fire hazar ds.
IMPOR T ANT SAFETY INSTRUCTIONS 206-4071 P AGE 4 (Contin ued from previ ous page) 14. Outdoor Antenna Grounding If an outsid e antenna or cable system is conn ected to the prod uct, be sure th e antenna or cable system is gr ounded so as to provi de some pr otection against voltag e surges an d built-up static char ges.
P AGE 5 206-4071 Use this page as a reference to find pages or sections to go to and set up the TV features. Go to page 7 to begin the Commercial Mode Master TV setup. 1. Connect TV to RF signal and Auxiliary sources . 2. Customize TV features and set up other operational controls in the Installer’s menu.
Installation and Setup Checklist __ Unpack TV an d all accessories . __ Install batteri es in rem ote control. __ Mak e all connecti ons to sign al and A ux sources that will be available .
P AGE 7 Commer cial Mode Setup for Master TV This page provides an overview of the TV configuration. See the pages r eferenced for mor e specific, detailed instructions at each step; how to access and use the Installer menu etc. Note 1: Disconnect all Aux inputs.
206-4071 P AGE 8 T ypical Connections Panel HDMI/DVI IN A V IN 1 COMPONENT IN USB IN SERVICE ONL Y VIDEO AUDIO R-AUDIO-L (MONO) VIDEO R L RGB IN (PC) RS-232C IN SERVICE ONL Y UPDA TE RESET AUDIO IN (RGB / DVI) REMOTE CONTROL OUT SPEAKER OUT 8 C P B Y P R .
P AGE 9 206-4071 A/V Input 2: Side Connections Panel / RF Antenna Connection A V IN 2 L/ MONO -AUDIO-R VIDEO H/P VIDEO IN Connect to vi deo output port on extern al device . L/MONO-AUDIO-R IN Connect to au dio output jacks from e xternal devi ce . For only mon o audio output, connect to Left au dio input.
206-4071 P AGE 10 MPI Car d Slot DC IN ANTENNA /CABLE M.P . I. M.P . I. Card Slot RF CABLE RF cable needs to be dis- connected to r emove cur- rent ca rd . MPI Car d Remo v al / PPV Car d Installation 1. Remove th e two MPI card r etainer screws . 2. Pull out curren t MPI card f ar enough so that the RF cable can be d etached fr om the old card .
P AGE 11 206-4071 Gener al Guidelines: Choosing a Location f or installing a VES A Standar d Mount T o th e right ar e some e xamples of VES A stand ard moun ts. Sin ce there ar e num erous types of stands an d moun ts available, only a few ar e shown h ere .
206-4071 P AGE 12 Installer Overview Operating Installer Menu T o set up th e controls f or the TV you will n eed to know how to en ter the TV In staller men u and mak e chang es to the def ault values. If necessary , famili arize yourself with the TV Installer m enu an d how to mak e and save chan ges to the item s in the m enu.
P AGE 13 206-4071 TV Overview Usin g the 32LG3DCH-U A Hospital TV , the patien t has available the f ollowing entertainm ent opti ons. • Pillow Speaker con trol o f TV . • Auxili ary inputs on sid e connection s panel, if en abled. • Analog an d Digital pr ogramming en tertainmen t as provid ed by hospital: VHF , UHF , D TV , CA TV , CAD TV .
206-4071 T ypical Installer Multi-Brand Remote Contr ol LG Multi-brand Remote Control Use the MODE button to select TV and put installer remote into TV operating mode . Notes: This remote is not supplied with the TV . This typical LG multi- brand remote control is shown for reference .
TV INPUT/INPUT Select available input sources . POWER T urns your TV or an y other programm ed equipmen t On or Off, depen ding on mode . MUL TI Selects RGB, HDMI,DVI, HDMI2 and Compon ent Input sources . Adjusts pi cture bri ghtness. EZ PIC Selects the f actory preset pi cture appropriate for th e viewin g environment.
206-4071 P AGE 16 1 2 3 4 5 6 3 1 5 2 4 6 TV ON/OFF OPEN CHAN UP/DATA IN COMMON AUDIO OUT CHAN DOWN Pillow Speak er used in your s ystem? - Connect pillow speak er and sli de con- trol switch to ‘Pillow Speak er’ to con- trol TV an d hear au dio on pillow speaker .
Basic TV Featur es Setup CHANNEL PICTURE AUDIO TIME OPTION LOCK CHANNEL PICTURE LOCK OPTION TIME Enter Move Enter Move Enter Move Enter Move Enter Move Aspect Ratio : 16:9 Picture Mode : Vivid - Backl.
Channel Menu The Channel menu contains the channel search and channel scanning setup options CHANNEL PICTURE AUDIO TIME OPTION LOCK CHANNEL Enter Move Auto T uning Manual T uning Channel Edit Channel Label Channel Menu Navigation T ypical M enu Operati on Auto T uning (Channel Search) 1.
P AGE 19 206-4071 Pictur e Menu The Picture menu settings control the appearance on the TV picture CHANNEL PICTURE AUDIO TIME OPTION LOCK PICTURE Enter Move Aspect Ratio : 16:9 Picture Mode : Vivid - .
206-4071 P AGE 20 Audio Menu The Audio menu configures the TV sound options CHANNEL PICTURE AUDIO TIME OPTION LOCK AUDIO Enter Move Clear Voice : Off Balance : 0 : Sound Mode : Standard - SRS T ruSurround XT :Off - T reble 50 - Bass 50 - Reset TV Speaker: On/Off Auto Volume : Off A udio Menu Navigation T ypical M enu Operati on Sound Mode 1.
P AGE 21 206-4071 Time Menu The onscreen menus control the basic TV features CHANNEL PICTURE AUDIO TIME OPTION LOCK TIME Enter Move Clock : - - - -, - - - - , - - : - - - - Off Time :Off On Time :Off Sleep Timer :Off Auto Sleep :Off Time Menu Navigation T ypical M enu Operati on Sleep Timer 1.
206-4071 P AGE 22 Option Menu The Option menu can be used to configure digital captions for the end user CHANNEL PICTURE AUDIO TIME OPTION LOCK OPTION Enter Move Language :English Caption : Off Option Menu Navigation T ypical M enu Operati on Caption T urns capti ons On/Off and en ters submen us 1.
P AGE 23 206-4071 Lock Menu The Lock menu can be used to set up V-Chip (Parental Control) CHANNEL PICTURE AUDIO TIME OPTION LOCK LOCK Enter Move Lock System :Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock Menu Navigation T ypical M enu Operati on Lock System 1.
206-4071 P AGE 24 Channel Banks Overview Channel Banks N ote: Disable all Aux sources in th e Installer men u that will not be mad e available to the end user . Channel Banks Ov erview Purpose of Chann el Banks: Allows the instituti on administrator to con trol access to patien t in-room TV progr amming.
3140OSKZ003AR6 MUTE POWER BANK GUIDE CH PREVIEW SAP INFO CC OK VOL CH CH VOL FLASHBK TIMER ALARM MENU ADJ ADJ ADJ ADJ BED1 BED2 CH 01 1-001 NORMAL-ADDED Enter -> Change CC ->VCHIP Menu Ch. Preview -> Exit CHANNEL PREVIEW - BANK 1 Bank Selects channel banks 1-2-3-4.
206-4071 Each channel bank is capable of storing broadcast digital and analog channels Figur e 1. T ypical channel bank s after running A uto Tuning B A N K 1 2 3 4 A A A A A A A A A A A A A A A A A A.
206-4071 PLAN Y OUR CHANNEL B ANKS B Y FILLING IN THESE CHARTS (or use photocopies) B A N K 1 2 3 4 Purpose Channel N umber 1 2 3 4 5 6 7 8 9 1 01 11 21 3 1 41 5 1 61 7 1 81 92 02 1 2 22 3 2 4 2 B A N.
206-4071 P AGE 28 Upgrading TV So ftwar e 1. Plug USB M emory Card in to USB In port on TV . 2. Men u should appear , if not press th e Menu k ey . 3. Use Up/Down arr ow keys to navi gate through the upgr ades. Select th e upgrade that you wan t to install by hi ghlightin g it and pressin g the Enter k ey .
P AGE 29 206-4071 On T ar get TV , T each Master TV Pr ofile 1. Plug USB m emory card with M aster TV Profile setup into T arget TV U SB In port. 2. Press M enu key to open M ain menu an d then highli ght the Opti on Menu i con. 3. Press th e Left arrow key on ce, this will hi ghlight the Opti on icon on left sid e of men u.
206-4071 P AGE 30 Antenna (or CA TV) Antenna (or CA TV) TV Link Loader-Demo TLL1100A Ready TLL1100A ENTER RECEIVE SEND MENU MODE CLONE SELECTION MENU Selected Bank: CBank X Saved (1) LEARN FROM TV (2).
Bef or e y ou begin cloning... • The M aster TV should be connected to a g ood, stable sign al from an over-th e-air antenna or cable servi ce Analog channel and conn ected to power . (See above .) • T eaching an d Learning is only possible between id entical mod el TV/STBs.
Use MPI Cable to Connect L T2002 Clone Progr ammer to Master TV MPI P ort If ther e is a good connecti on, “THE CLONE HAS CONTROL OF TV” messag e will appear .
P AGE 33 206-4071 T each Master TV’ s Setup to the target TV After learning is complete , rem ove the M.P .I. cable from th e master TV an d connect it to the tar get TV that you want to copy the m aster TV’s setup into.
Use the Installer’s Menu to set up or change operational settings . See more detailed descriptions of the Installer menu items on the f ollowing pages... Accessing the Installer’ s Menu Mak e sure TV is on. Installer’s m enu item s can be accessed by using an installer’s r emote contr ol.
Menu Item Function V alue Range Default V alue Brief Description of Function and Comments 030 ACK MASK 0 / 1 0 If set to 1, chang es M.P .I. for som e OCV boxes. 031 POLL RA TE 20 ~ 169 94 Selects poll rate f or M.P .I. 032 TIMING PULSE 186 ~ 227 207 Sets baud r ate for M.
P AGE 36 Detailed Descriptions of Installer Menu Items 000 - INST ALLER SEQUENCE Specifies en try sequence to the In staller Men u. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANA GE (Po wer Management) Determines h ours of no activity bef ore autom atic shuto ff.
P AGE 37 206-4071-D 011 - KEY DEFEA T (Ke yboard Defeat) If set to 1, key d efeat prevents th e end user fr om accessing the on- screen m enus with the TV fr ont pan el—MENU, SELECT , and Left / Righ t arrow k eys do not fun ction. If set to 0, th ose keys do fun ction.
P AGE 38 206-4071 Installer Menu 035 - COMPPORT EN. (HDMI 1 P ort Enable) Enable/disables TV display pan el HDMI 1 input jack. Set to 0 to disable , set to 1 to enable . 038 - YPrPb EN. (Rear Component Video Enable) Set to 1 to enable display pan el rear Componen t Vid eo input jacks.
206-4071 P AGE 39 thus r elaxing M.P .I. timing requir ements to be compatible with PC based Wind ows controlled system s, r ange is 0 - 5. (Timeout = 25.5M S + [25.5 MS* Han dshake tim e]). 084 - PERMANENT BLK (P ermanent Block) Allows Lock (P arental Con trol) blockin g schemes to be perm anen t by disabling th e blocking hours fun ction.
206-4071 IMPORT ANT INST ALLER SETUP INFORMA TION! PLEASE READ THE FOLLOWING... T o set up a master TV you will n eed to know how to enter th e TV Installer men u and mak e changes to the d efault values as requir ed.
206-4071 P AGE 41 Changing a Channel’s ICON on Master TV 1. With Channel Up/Down, select th e channel you wan t to change th e Icon f or . 2. With the Ri ght or Left ADJ arrow , select the letter ‘I’ on th e channel ID display . 3. With the Up or Down arr ow , select the d esired ICON you wan t to appear to id entify the chann el.
Procedur e for Checking So ftware V ersion The so ftware version o f the TV may be ch ecked by accessing th e INST ALLER MENU. T o do this , press the MENU button r epeatedly until the m enu display ceases to respon d to MENU key presses . Then, pr ess "9", "8", "7", "6", "ENTER/SELECT".
P AGE 43 206-4071 USB Cloning T r oubleshooting If Upgrade Menu Does Not Appear 1. Go to the Opti on Menu. 2. Highli ght the Opti on Icon on the left si de of m enu. 3. Press th e number 7 key 7 tim es (7-7-7-7-7-7-7) then press ENTER. 4. Upgrad e Menu sh ould appear .
P AGE 44 206-4071 TV Camport Auto Sense Operation The CAMPORT A uto Sense functi on is enabled when: 1. Installer M enu Item 34, CAMPORT EN is set to 1 AND 2. Installer M enu Item 40, A UTO CAMPORT is en abled (1). Selectable= Can be accessed with INPUT key , direct access , etc.
206-4071 P AGE 45 OLD_OCV =0 OLD_OCV= 1 Source Input Source Mode Number Labeling Value Labeling Value Labeling 130 90 Video2 (Side) CV/SVIDEO 34 CAMPORT_EN 0x01 Video Front (Camport) 0 Video Front (Ca.
P AGE 46 206-4071 Some quick and easy tips to resolving problems Symptoms Possible Cause(s) Possible Solution(s) Power No P ower . See troublesh ooting flow chart. TV Picture No Pi cture . • Display pan el is turned off. -Turn TV on. -P ower failure? • Antenn a/Cable not connected .
P AGE 47 206-4071 Reset Clone After Static Shock After replacin g exhausted batteries , or if the progr ammer behaves stran gely after a static sh ock, use a paper clip or simi- lar instrum ent inserted thr ough the small h ole marked ”RESET” to activate the in ternal reset switch an d restore n ormal opera- tion.
P AGE 48 206-4071 Problem Solution Cannot chan ge channel status in m enu. Installer men u item 028 Ch Overide is set to 000. Set Ch Overid e to 001 to allow access for channel status chan ge . Channel Pr eview men u does not appear . 2-5-5+ Men u procedur e was not perform ed.
P AGE 49 206-4071 Controller Quick Check Is 'ST A TUS' LED on Analog Board Blinking ? Plug into AC Power Outlet Is TV Connected to AC Power ? Bad TV Ye s No No Ye s Is Red LED on TV Lit ? 1. Bad Analog Board. 2. Bad Digital Board. No Cycle the power by removing and re-connecting the AC power cord.
P AGE 50 206-4071 Commer cial Mode Check Press the "On/Off" key on the front panel. The On/Off key is always operational. Did you get a response ? Bad TV Ye s No Did TV stop responding or continue to respond ? TV is in Commercial Mode.
206-4071 75 OHM RF CABLE The wir e that comes from an o ff-air antenn a or cable service pr ovider . The end looks lik e a he x-shaped nut with a wire sti cking through th e middle . It screws on to the Antenn a/Cable threaded jack on th e back of the TV .
For Customer Support/Servi ce Please call: 1-888-865-3026 www .lg commer cial.com © Copyright 2008, LG Electronics U.S.A., Inc. 206-4096 Issue-C Mark eted and Distributed in the U nited States by LG Electroni cs U.
Ein wichtiger Punkt beim Kauf des Geräts LG Electronics 26-3DCH-UA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie LG Electronics 26-3DCH-UA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für LG Electronics 26-3DCH-UA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von LG Electronics 26-3DCH-UA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über LG Electronics 26-3DCH-UA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon LG Electronics 26-3DCH-UA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von LG Electronics 26-3DCH-UA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit LG Electronics 26-3DCH-UA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei LG Electronics 26-3DCH-UA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
