Benutzeranleitung / Produktwartung DU-42PX12X des Produzenten LG
Zur Seite of 48
PLASMA TV OWNER’S MANUAL Please read this manual carefully and completely before operating your TV . Retain this manual for future reference. Record model number and serial number of the TV in the spaces provided below . See the label attached on the back cover and relate this information to your dealer if you require service.
2 Plasma TV Warning W ARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P AR TS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
Owner ’s Manual 3 Safety Instructions Important safeguards for you and your new product Y our product has been manufactured and tested with your safety in mind.
4 Plasma TV Safety Instructions Antenna Lead in Wire Antenna Discharge Unit (NEC Section 810-20) Grounding Conductor (NEC Section 810-21) Ground Clamps Po wer Ser vice Grounding Electrode System (NEC .
Owner ’s Manual 5 Contents After reading this manual, keep it handy for future reference. W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Plasma TV Introduction Introduction Introduction What is a Plasma Display Panel (PDP)? A plasma display panel is the latest display technology and the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable.
Owner ’s Manual 7 Introduction Controls Controls ON/OFF TV/VIDEO MENU VOL CH - This is a simplified representation of front panel. Image shown may be somewhat different from your TV . - This manual explains the features available on the DU-50PX10 series TVs.
8 Plasma TV Introduction Connection Options Connection Options R S-VIDEO VIDEO L / MONO AUDIO A/V 2 REMOTE CONTROL RS-232C INPUT (CONTROL/SERVICE) AC INPUT AUDIO INPUT COMPONENT 2 COMPONENT 1 RL DIGIT.
Owner ’s Manual 9 Installation - When using the remote control, aim it at the remote control sensor on the TV . LIGHT TV/VIDEO MODE COMP/RGB/DVI MUTE SURF VOL CH INFO SAP RA TIO CC MENU SOUND VIDEO .
10 Plasma TV Installation Installation Installation Owner ’ s Manual 1.5V 1.5V Batteries Power Cord L I G H T T V / V I D E O MODE COMP/RGB/DVI MUTE SURF VOL CH INFO SAP RATIO CC MENU SOUND VIDEO EX.
Owner ’s Manual 11 Installation Installation Instructions Installation Instructions • The TV can be installed in various ways such as on a wall, or on a desktop etc. • The TV is designed to be mounted horizontally . The speakers shown are optional.
12 Plasma TV Installation - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality , adjust antenna direction if needed.
Owner ’s Manual 13 Installation NOTE: All cables shown are not included with the TV - T o avoid picture noise (interference), leave an adequate distance between the VCR and TV - Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time.
14 Plasma TV Installation • Component Input ports T o get better picture quality , connect a DVD player to the compo- nent input ports as shown below . How to connect Connect the audio and video cables from the external equip- ment's output jacks to the TV input jacks, as shown in the figure.
Owner ’s Manual 15 Installation Send the TV ’ s audio to external audio equipment (stereo system) via the Digital Audio Output Optical port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio Optical Output port. 2. Connect the other end of the optical cable to the digital audio optical input on the audio equipment.
16 Plasma TV Installation How to connect 1. T o get the best picture quality , adjust the PC graphics card to 1024x768, 60Hz. 2. Use the TV ’ s RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections, depending on your PC connector .
Owner ’s Manual 17 Installation Operation Operation - Be sure to select the RGB-PC/RGB-DTV source before operation. (For RGB-DTV input source, Position and Reset are available.) - In DVI-PC and DVI-DTV input source, settings are not adjustable. - Y ou can manually adjust picture position and minimize image shaking for the PC input source.
18 Plasma TV Operation On-screen Menus Language Selection On-screen Menus Language Selection T T urning the TV On urning the TV On T urning on the TV just after installation T urning on the TV (power cord is still connected) 1. Connect power cord correctly .
Owner ’s Manual 19 Operation SETUP VIDEO AUDIO TIME OPTION LOCK Prev. Select antenna input, press MENU Air ANT 1 ANT 2 - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. - Run EZ Scan again after any Antenna/Cable connection changes.
20 Plasma TV Operation SETUP VIDEO AUDIO TIME OPTION LOCK Prev. EZ Scan Ch.Edit DTV Signal Ch. Label G Main Input Sub Input SET ID MENU Selection ( G or ) leads you to the channel logo screen.
Owner ’s Manual 21 Operation - Adjust the picture appearance to suit your preference and viewing situations. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select the desired picture option ( Contrast , Brightness , Color , Sharpness , or Tint ) .
22 Plasma TV Operation - Other languages may be available if a digital signal is provided by the broad- casting station. Audio Menu Options Audio Menu Options 1. Press the SOUND button repeatedly to select the appropriate sound setup as shown below: Off (your own settings), Normal , Stadium , Theater , and Music .
Owner ’s Manual 23 Operation SETUP VIDEO AUDIO TIME OPTION LOCK Prev. Audio Language EZ SoundRite EZ Sound Balance T reble Bass Front Surround G TV Speaker BBE Off 3D EchoSound System SRS T ruSurround XT MENU 1. Press the MENU button and then use D / E button to select the AUDIO menu.
24 Plasma TV Operation SETUP VIDEO AUDIO TIME OPTION LOCK Prev. Audio Language EZ SoundRite EZ Sound Balance T reble Bass Front Surround TV Speaker G BBE Off On MENU 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select TV Speaker .
Owner ’s Manual 25 Operation T T ime Menu Options ime Menu Options SETUP VIDEO AUDIO TIME OPTION LOCK Prev. Auto Clock G Manual Clock Off Timer On Timer Sleep Timer Auto Off Off On Time Zone Eastern MENU SETUP VIDEO AUDIO TIME OPTION LOCK Prev. Auto Clock Manual Clock Off Timer On Timer G Sleep Timer Auto Off Off On Ti me 6 : 30 AM Ch.
26 Plasma TV Operation Auto Of Auto Of f f - If set to on and there is no input signal, the TV turns off vertically after 10 min- utes. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto Off .
Owner ’s Manual 27 Operation Option Menu Features Option Menu Features Aspect Ratio Control Aspect Ratio Control - Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format.
28 Plasma TV Operation Caption Mode Caption Mode Analog Broadcasting System Captions - Select a caption mode for displaying captioning information if provided on a program. - Analog caption displays information at any position on the screen usually the program's dialog.
Owner ’s Manual 29 Operation Option Menu Features continued Option Menu Features continued SETUP VIDEO AUDIO TIME OPTION LOCK Prev. Aspect Ratio Caption Caption Mode Caption Option G Language Cinema.
30 Plasma TV Operation Low Power Low Power - Low power reduces the plasma display's power consumption. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Low power .
Owner ’s Manual 31 Operation Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V -Chip) is used to block program viewing based on the ratings sent by the broadcasting station.
32 Plasma TV Operation Parental Lock Setup Parental Lock Setup 1. Press the MENU button and then use D / E button to select the LOCK menu. The n , press the G button • If Lock is already set, enter the password as requested. • The TV is set up with the initial password “ 7-7-7-7 ” .
Owner ’s Manual 33 Operation W W atching PIP/POP/T atching PIP/POP/T win Picture win Picture - PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image.
34 Plasma TV Operation Moving the PIP Moving the PIP sub picture sub picture In PIP mode, press the D / E / F / G button to move the sub picture to a different location on the screen.
Owner ’s Manual 35 External Control Device Setup No. Pin Name 1 No connection 2 RXD (Receive data) 3 TXD (T ransmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 8 .
36 Plasma TV External Control Device Setup Set ID Set ID Use this function to specify a monitor ID number . Refer to ‘ Real Data Mapping ’ . See page 37. • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None * Use a crossed (reverse) cable.
Owner ’s Manual 37 External Control Device Setup 02. Input Select (Command2:b) (Main Picture Input) G T o select input source for the Monitor. T ransmission Data 0: DTV 1: Analog 2: Video 1 3: Video.
38 Plasma TV External Control Device Setup 09. Color (Command2:i) G T o adjust the screen color. Y ou can also adjust color in the V ideo menu. T ransmission Data Min : 0 ~ Max : 64 • Refer to ‘ Real data mapping ’ . See page 37. [k][i][ ][Set ID][ ][Data][Cr] Acknowledgement [i][ ][Set ID][ ][OK][Data][x] 10.
Owner ’s Manual 39 External Control Device Setup 19. Color T emperature (Command2:u) G T o adjust color temperature. Y ou can also adjust color temperature in the V ideo menu. T ransmission Data 0: W arm 1: Medium 2: Cool [k][u][ ][Set ID][ ][Data][Cr] Acknowledgement [u][ ][Set ID][ ][OK][Data][x] 23.
40 Plasma TV IR Codes G Connect your wired remote control to the Remote Control port on the TV . G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz G Configuration of frame G Re.
Owner ’s Manual 41 IR Codes 0x0B 0x08 0xC4 0xC5 0x98 0x79 0x0E 0x10 ~ 0x19 0x4C 0x1A 0x09 0x02 0x03 0x00 0x01 0x1E 0xAA 0x39 0x40 0x41 0x07 0x06 0x44 0x43 0x52 0x4D 0x5B 0x60 0x72 0x71 0x61 0x63 0x6.
42 Plasma TV Programming the Remote G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands.
Owner ’s Manual 43 Programming Codes Programming Codes Programming Codes VCRs VCRs CA CA TV TV AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSON.
44 Plasma TV Programming Codes Audio Audio APEX DIGIT AL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNA VOX 013 MARANTZ 024 MITSUBISHI 002 NAD 023 ONKYO 008 017 P ANAS.
Owner ’s Manual 45 T roubleshooting Checklist No output from one of the speakers • Adjust Balance in the AUDIO menu. (Refer to p.23) Unusual sound from inside the TV • A change in ambient humidity or temperature may result in an unusual noise when the plasma display is turned on or of f and does not indicate a fault with the TV .
46 Plasma TV Maintenance & Specification • The specifications shown above may be changed without prior notice for quality improvement. Product Specifications Product Specifications MODEL AC100-240V ~ 60Hz NTSC-M, A TSC VHF 2 ~ 13, UHF 14 ~ 69, CA TV 1 ~ 125, CADTV 1 ~ 135.
Y our LG Plasma TV will be repaired or replaced in accordance with the terms of this warranty , at LGE’s option, if it proves to be defective in material or workmanship under normal use, during the .
TO CONTACT THE LGE CUSTOMER SERVICE CENTER BY MAIL: LGE Customer Interactiv e Center P .O. Box 240007 201 James Record R oad Huntsville, Alabama 35824 http://www .lgservice.com FOR SERVICE: Before you call for warranty service, check your operating guide – you may avoid a service call.
Ein wichtiger Punkt beim Kauf des Geräts LG DU-42PX12X (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie LG DU-42PX12X noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für LG DU-42PX12X - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von LG DU-42PX12X reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über LG DU-42PX12X erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon LG DU-42PX12X besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von LG DU-42PX12X verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit LG DU-42PX12X. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei LG DU-42PX12X gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
