Benutzeranleitung / Produktwartung 10 des Produzenten Apex Digital
Zur Seite of 24
Apex Apex Apex Apex Apex Apex Apex Apex Apex Owners Manual.
.
Contents 1 Important Safety Instructions 2 Re-cycling 3 RoHS Declaration of Conformity 3 Unpacking 4 Introduction 5 Setting up and Positioning 6 Optimum Positioning 7 Fitting the Apex 10 to a W all or.
IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus with water . 6. Clean only with a dry cloth. Great care and attention has gone into the materials chosen to produce the Apex Series.
SAFETY INSTRUCTIONS FOR FIXING YOUR APEX LOUDSPEAKERS TO A W ALL WARNING: For safety reasons do not attempt to fix these speakers to your wall if you ar e unsur e of your ability to provide a secur e and safe fixing. Y ou will need to determine where to fit the bracket and the structure of the wall.
UNP ACKING Due to the shape and the polished finish of the pr oduct, care must be taken when handling your new Apex Series Loudspeaker . Care must be taken when handling the table top stand/ wall plate. This, the accessories and the grille should be removed fr om the packaging before removing and unpacking the loudspeaker .
INTRODUCTION Congratulations and thank you for your purchase of the loudspeaker from the Apex Series. We are confident they will pr ovide years of enjoyment and pleasure as only high quality components have been used throughout.
SETTING UP AND POSITIONING Although position and suitability will have been consider ed prior to purchasing the Apex speakers, this section will guide you through optimising their positioning and set up. An illustration is provided on page 7 to show optimum positions.
22° 0° 30° 90° 110° 135° 150° Centre Left Right Surround Right Surround Left Rear Surround Left Rear Surround Right Apex 7 OPTIMUM POSITIONING.
FITTING THE APEX 10 TO A W ALL/ CEILING T o fix the Apex 10 to a wall or ceiling, follow the step by step instructions below . The Apex 10 can be wall mounted horizontally (for use as a centre channel), the template just needs to be rotated.
Pivot Clamp Arms Rubber Pad with Through Hole T able T op Stand/ W all Plate Cabinet Clamp Screw Short Screws APEX 10 FIXING CONFIGURA TIONS W all Mounting - Exploded W all Mounting - Fixed Apex 9.
Ceiling Mounting - Fixed T able T op Stand/ W all Plate Long Screws Rubber Pad with Through Hole Bracket Extension Pole Pivot Clamp Arms Clamp Screw Ceiling Mounting - Exploded monitoraudio.
T able T op Stand/ W all Plate Long Screws Rubber Pad with Through Hole Solid Rubber Pad Bracket Extension Pole Pivot Clamp Arms Clamp Screw Cabinet T able Mounting - Exploded T able Mounting - Assemb.
Apex 10 Horizontally on a T able/ Shelf - Exploded If using the Apex 10 horizontally on a table or shelf, attached the self adhesive feet as shown above to prevent movement. The badge can also be r otated. Adhesive Feet Fixed (Cabinet needs to be rotated for use) Self Adhesive Feet monitoraudio.
ADJUSTING THE APEX 10 BRACKET ASSEMBL Y The clamping mechanism can be adjusted horizontally and vertically . This is achieved by taking the weight of the cabinet and loosening the clamp screw (Hex Key included). The cabinet can now be adjusted at both pivot points 1 and 2 (as shown in the illustration below).
FITTING THE APEX 40 TO A W ALL T o fix the Apex 40 to a wall (horizontally or vertically), follow the step by step instructions below: • We do not supply fixing screws or wall plugs with these .
APEX 40 FIXING CONFIGURA TIONS W all Mounting - Exploded Cabinet Fig. 1 Fig. 2 Fig. 4 Fig. 3 Fig. 5 Grub Screw Angled Fully Right/ Up Press the Cabinet Fully Back.
GRILLE BADGE FIXING (Apex 40 only) The Apex grille is not supplied with the badge attached. Ther e ar e two potenetial positions for the badge depending on orientation, therefore the decision is left to the end user by providing the badge loose.
Model Apex 10 Apex 40 Frequency Response 60Hz – 35kHz 50Hz – 35kHz Sensitivity (1W@1M) 87dB 90dB Nominal Impedance 8 Ohms 8 Ohms Power Handling Single (RMS) 100W 200W Recommended Amp Requirements 25-100 W 50-200 W Maximum SPL (dBA) 110.
GUARANTEE AND SERVICE T o validate your warranty please visit www .monitoraudio.co.uk within 30 days of purchase. When you register here you’ll gain fr ee entry to our monthly prize draw! What’ s .
EC DECLARA TION OF CONFORMITY EC Declaration of Conformity We, Monitor Audio Ltd. Unit 2,24 Brook Road Rayleigh Essex SS6 7XJ England Declare in own r esponsibility , that the Apex Series product described in this manual is in compliance with T echnical Standards/Council Dir ectives: (L VD) 73/23/EEC Low V oltage Directive EN60065: 09.
DA T A PROTECTION We at Monitor Audio are committed to respecting the wishes and privacy of our customers. Any information you provide will be held in the strictest confidence and only used within the Monitor Audio organisation for the provision of services such as warranty claims or spare parts.
.
Monitor Audio Ltd. Unit 2, 24 Brook Road Rayleigh, Essex SS6 7XJ England T el: 01268 740580 Fax: 01268 740589 Email: info@monitoraudio.co.uk monitoraudio.
Ein wichtiger Punkt beim Kauf des Geräts Apex Digital 10 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Apex Digital 10 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Apex Digital 10 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Apex Digital 10 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Apex Digital 10 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Apex Digital 10 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Apex Digital 10 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Apex Digital 10. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Apex Digital 10 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
