Benutzeranleitung / Produktwartung FBR-1404TX des Produzenten LevelOne
Zur Seite of 122
LevelOne FBR-1404TX Broadband VPN Gateway w/ 4-port Switch User’s Manual Version:1.1.
Table of Contents CHAPTER 1 INTRODUCTION ............................................................................................. 1 LevelOne Broadband VPN Gateway Features ............................................................... 1 Package Contents .
Certificates ................................................................................................................... .... 80 CRLs .............................................................................................................
Chapter 1 Introduction This Chapter provides an overview of the LevelOne Broadband VPN Gate- way's features and capabilities. Congratulations on the purchase of y our new LevelOne Broadband VPN Gateway.
LevelOne Broadband VPN Gateway User Guide Advanced Internet Functions • Communication Applications. Support for Internet com municat ion applications, such as interactive Gam es, Telephony, and Conferencing appl ications, which are often di fficult to use when behind a Firewall, is i ncluded.
Introduction • Protection against DoS attacks. DoS (Denial of Service) attacks can flood y our Internet connection with invalid packets a nd connection requests, usi ng so much band- width and so many resources that Internet access becom es unavailable.
LevelOne Broadband VPN Gateway User Guide Physical Details Front-mounted LEDs Figure 2: Front Panel Power (Green) On - Power on. Off - No power. Status (Red) On - Error condition.
Introduction Rear Panel Figure 3: Rear Panel Reset Button This button has two (2) functi ons: • Reboot . When pressed and released, the LevelOne Broadband VPN Gateway will reboot (restart). • Clear All Data . This button can also be used to clear ALL data and restore ALL settings to the factory defaul t values.
Chapter 2 Installation This Chapter covers the physical installation of the LevelOne Broadband VPN Gateway. Requirements • Network cables. Use standard 10/100BaseT network (UTP) cables wit h RJ45 connectors. • TCP/IP protocol m ust be installed on all PCs.
Installation required. Just connect any LAN port to a norm al port on the ot her hub, using a standard LAN cable. 3. Connect WAN Cable Connect the DSL or Cable m odem to t he WAN port on the LevelOne Broadband VPN Gateway. Use the cable suppli ed with your DSL/Cabl e modem .
Chapter 3 Setup This Chapter provides Setup deta ils of the LevelOne Broadband VPN Gate- way. Overview This chapter describes the setup procedure for: • Internet Access • LAN configuration PCs on your local LAN m ay also require configurati on. For details, see Chapter 4 - PC Con- figuration .
Setup Configure or use any of the followi ng: • Config File backup/restore • PC Database • Remo te Ad min • Routing (RIP and stat ic Routing) • Upgrade Firmware • UPnP Chapter 9: Other Fea.
LevelOne Broadband VPN Gateway User Guide Using your Web Browser To establish a connection from your PC to t he LevelOne Broadband VPN Gateway: 1. After installing t he LevelOne Broadband VPN Gateway in your LAN, st art your PC. If your PC is already runni ng, restart it.
Setup Setup Wizard The first time you connect to the LevelOne Bro adband VPN Gateway, the Setup Wizard will run automatically. (The Setup Wizard will also ru n if the LevelOne Broadband VPN Gate- way's default sett ing are restored.) 1. Step through the Wizard until finished.
LevelOne Broadband VPN Gateway User Guide PPPoE You connect to the ISP only when required. The IP address is usually allocated auto m ati- cally. User name and password. PPTP Mainly used in Europe. You connect to the ISP only when required. The IP address is usually allocated auto m ati- cally, but may be Static (Fixed).
Setup Home Screen After finishing or exitin g the Setup Wizard, you will see the Home screen. When you connect in future, you will see this sc reen when you connect.
LevelOne Broadband VPN Gateway User Guide LAN Screen Use the LAN link on the main m enu to reach the LAN screen. An example screen is shown below. Figure 7: LAN Screen Data - LAN Screen TCP/IP IP Address IP address for the LevelOne Broa dband VPN Gateway, as seen from the local LAN.
Setup DHCP What DHCP Does A DHCP (Dynami c Host Configuration Prot ocol) Server allocates a valid IP address to a DHCP Client (PC or device) upon request. • The client request is ma de when the client device start s up (boots). • The DHCP Server provides the Gateway and DNS addresses to the clien t, as well as allocating an IP Address.
LevelOne Broadband VPN Gateway User Guide Password Screen The Admin Login screen all ows you to assign a user nam e and password to the LevelOne Broadband VPN Gateway. Figure 8: Password Screen 1. The default login nam e is "admi n". Change this to the desired value.
Chapter 4 PC Configuration This Chapter detail s the PC Configurat ion required on the local ( "Internal") LAN. Overview For each PC, the following may need to be configured: • TCP/IP netw.
LevelOne Broadband VPN Gateway User Guide Checking TCP/IP Settings - Windows 9x/ME: 1. Select Control Panel - Net work . You should see a screen like t he following: Figure 10: Network Configuration 2. Select the TCP/IP protocol for your network card.
PC Configuration • On the Gateway tab, enter the LevelOne Broadband VPN Gateway 's IP address in the New Gateway field and click Add , as shown below. Your LAN adm inistrator can advise you of the IP Address they assigned to the LevelOne Broadband VPN Gat eway.
LevelOne Broadband VPN Gateway User Guide Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Net work , and, on the Protocols tab, select the TCP/IP prot ocol, as shown below. Figure 14: Windows NT4.0 - TCP/IP 2. Click the Properties button to see a screen like the one below.
PC Configuration Figure 15: Windows NT4.0 - IP Address 3. Select the network card for your LAN. 4. Select the appropriate radi o button - Obtain an IP address from a DHC P Server or Specify an IP Address , as explained below. Obtain an IP address from a DHCP Server This is the default Windows setting.
LevelOne Broadband VPN Gateway User Guide Figure 16 - Windows NT4.0 - Add Gateway 2. The DNS should be set to the address provided by y our ISP, as follows: • Click the DNS tab. • On the DNS screen, shown below, click the Add button (under DNS Service Search Order ), and enter the DNS provided by your ISP.
PC Configuration Figure 17: Windows NT4.0 - DNS 23.
LevelOne Broadband VPN Gateway User Guide Checking TCP/IP Settings - Windows 2000: 1. Select Control Panel - Ne twork and Dial-up Connect ion . 2. Right - click t he Local Area Connection icon and select Properties . You shoul d see a screen like the following : Figure 18: Network Configuration (Win 2000) 3.
PC Configuration Figure 19: TCP/IP Properties (Win 2000) 5. Ensure your TCP/IP settings are correct , as described below. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatical ly . This is the default Windows setting. Using this is recommended .
LevelOne Broadband VPN Gateway User Guide Checking TCP/IP Settings - Windows XP 1. Select Control Panel - Net work Connection . 2. Right click t he Local Area Connection and choose Properties . You should see a screen like the following: Figure 20: Network Configuration (Windows XP) 3.
PC Configuration Figure 21: TCP/IP Properties (Windows XP) 5. Ensure your TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatical ly . This is the default Windows setting. Using this is recommended .
LevelOne Broadband VPN Gateway User Guide Internet Access To configure your PCs to use the LevelOne Broadband VPN Gateway for Internet access: • Ensure that the DSL modem, Ca ble modem , or other permanent connect ion is functional.
PC Configuration Macintosh Clients From your Macintosh, you can access the Internet via the LevelOne Broadband VPN Gateway. The procedure is as follows. 1. Open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via pop-up m enu. 3. Select Using DHCP Server from the Confi gure pop-up menu.
Chapter 5 Operation and Status This Chapter details the operation of the LevelOne Broadband VPN Gateway and the status screens. Operation Once both the LevelOne Broadband VPN Gateway and the PCs are configured, opera- tion is automatic.
Operation and Status Data - Status Screen Internet Connection Method This indicates the current connect ion method, as set in the Setup Wizard. Broadband Modem This shows the connection status of the m odem.
LevelOne Broadband VPN Gateway User Guide Connection Status - PPPoE If using PPPoE (PPP over Ethernet), a screen like the following example will be displayed when the "Connectio n Details" button is clicked.
Operation and Status Buttons Connect If not connected, establish a connect ion to your ISP. Disconnect If connected to your ISP, hang up the connection. Clear Log Delete all data currently in the Log . This will make it easier to read new messages. Refresh Update the data on screen.
LevelOne Broadband VPN Gateway User Guide Connection Status - PPTP If using PPTP (Peer-to-Peer Tunne ling Protocol), a screen like the following example will be displayed when the "Connect ion Details" but ton is clicked.
Operation and Status Clear Log Delete all data currently in the Log . This will make it easier to read new messages. Refresh Update the data on screen.
LevelOne Broadband VPN Gateway User Guide Connection Log Connection Log • The Connection Log shows status m essages relating to the existing connection. • The Clear Log button will restart the Log, while the Refresh button will update the messages shown on screen.
Operation and Status Default Gateway Th e IP Address of the remote Gatewa y or Router associated with the IP Address above. DNS IP Address The IP Address of the Domain Name Server which is currently used.
LevelOne Broadband VPN Gateway User Guide Connection Details - Fixed/Dynamic IP Address If your access method is "Direct" (no login), a screen like the follo wing exam ple will be displayed when the "Connect ion Details" but ton is clicked.
Operation and Status DHCP Server. • If an IP Address has been allocated to the LevelOne Broadband VPN Gateway (by the ISP's DHCP Server), this button will say "Release". Clicking the "Release" button will break the connec- tion and release the IP Address.
Chapter 6 Internet Features This Chapter explains when and how to use the LevelOne Broadband VPN Gateway's "Internet" Features. Overview The following advanced features are covered in t.
Internet Features WAN Port Configuration Screen The WAN Port Configuration screen provides an alte rnative to using the Wizard. It can be accessed from the Internet m enu.
LevelOne Broadband VPN Gateway User Guide Specified IP Address Also called Static IP Address . Select this if your ISP has allocated you a fixed IP Address. If this option i s selected, the followi ng data must be entered. • IP Address . The IP Address allocated by the ISP.
Internet Features MAC Address MAC Address Also called Network Adapter Address or Physical Address . This is a low-level identifier, as seen from the WAN po rt. Normally there is no need to change this, bu t som e ISPs require a particular value, often that of the PC initially used for Internet access.
LevelOne Broadband VPN Gateway User Guide Send incoming calls to This lists the PCs on your LAN. • If necessary, you can add PCs m anually, using the "PC Database" option on the advanced m enu. • For each application listed a bove, you can choose a destina- tion PC.
Internet Features Incoming Ports • Type - Select the protocol (TCP or UDP) used when you receive data from the special application or service. (Note: Som e applications use different protocols for outgoi ng and incoming dat a). • Start - Enter the beginning of the range of port num bers used by the application server, for data you recei ve.
LevelOne Broadband VPN Gateway User Guide URL Filter The URL Filter allows you to block access to undesirable Web site • To use this feature, you must define "filter string s". If the "filter string" appears in a requested URL, the request is blocked.
Internet Features Dynamic DNS (Domain Name Server) This free service is very usef ul when combined with the Virtual Server feature. It allows Internet users to connect to your Vi rtual Serv ers using a URL, rather than an IP Address. This also solves the problem of having a dynami c IP address.
LevelOne Broadband VPN Gateway User Guide DDNS Data User Name Enter the "User name " specified at the www.dyndns.org Web site when you registered. Password Enter your current password for www.dyndns.org Domain Name • Enter your domai n name, as all ocated at www.
Internet Features Virtual Servers This feature allows you to make Servers on your LAN accessible to Internet users. Norm ally, Internet users would not be able to access a server on your LAN because: • Your Server does not have a valid external IP Address.
LevelOne Broadband VPN Gateway User Guide Virtual Servers Screen The Virtual Servers screen is reached by the Virtual Servers link on the Internet m enu. An example screen is shown below. Figure 34: Virtual Servers Screen This screen lists a num ber of pre-defined Serv ers,.
Internet Features It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dynam ic. However, you can use the Dynamic DNS feature, described in the followi ng section, to allow users to connect to your Virtual Servers usi ng a URL, rather than an IP Address.
Chapter 7 Security Configuration This Chapter explains the settings ava ilable via the security configuration section of the "Security " menu.
Security Configuration Access Control This feature is accessed by the Access Control link on the Securi ty menu. The Access Control feature allows administrators to restrict the level of Internet Access avail- able to PCs on your LAN. With the default se ttings, everyone has unrestricted Internet access.
LevelOne Broadband VPN Gateway User Guide "Members" Button Click this but ton to add or remove m em bers from the current Group. • If the current group is "Default", t hen mem bers can not be added or deleted. This group contai ns PCs not allocated to any other group.
Security Configuration Group Members Screen This screen is displayed when the Members button on the Access Control screen is clicked. Figure 37: Group Members Use this screen to add or remove m em bers (PCs) from the current group. • The "Del >>" butto n will remove the selected PC (in the Members list) from the current group.
LevelOne Broadband VPN Gateway User Guide Firewall Rules For normal operati on and LAN protection, it i s not necessary to use this screen. The Firewall will always block DoS (Denial of Serv ice) attacks.
Security Configuration Data For each rule, the following data is shown: • Name - The name you assigned t o the rule. • Source - The traffic covered by this rule, defi ned by the source IP address. If the IP address is follo wed by ... this indicates there is range of IP addresses, rather than a single address.
LevelOne Broadband VPN Gateway User Guide Firewall Rule Clicking the "Add" but ton in the Firewall Rules screen will display a screen like the ex am ple below. Figure 39: Firewall Rule Data - Firewall Rule Screen Name Enter a suitable name for this rule.
Security Configuration Dest IP These settings determ ine which traffic, based on their dest ination IP address, is covered by this rule. Select the desired option: • Any - All traffic from the source port is covered b y this rule. • Single address - Enter the required IP address in the "St art IP address" field".
LevelOne Broadband VPN Gateway User Guide Logs The Logs record various types of activity on the LevelOne Broadband VPN Gateway. Thi s data is useful for troubleshooti ng, but enabling all logs will ge nerate a large amount of data and adversely affect performance.
Security Configuration E-Mail Logs Send E-mail alert If enabled, an E-mail will be sent immediately if a DoS (Denial of Service) attack is detected. If enabled, the E-mail address infor- mation m ust be provided. E-mail Logs You can choose to have the logs E-mailed to you, by enabl ing either or both checkboxes.
LevelOne Broadband VPN Gateway User Guide Security Options This screen allows you to set Firewall and other security-related options. Figure 41: Security Options Screen Data - Security Options Screen SPI Firew all Enable DoS Firewall If enabled, DoS (Denial of Serv ice) attacks will be detected and blocked.
Security Configuration Options Respond to ICMP The ICMP protocol is used by the "ping" and "trace route" programs, and by network moni toring and diagnostic programs. • If checked, the LevelOne Broadband VPN Gateway will respond to ICMP packets received from the Internet.
LevelOne Broadband VPN Gateway User Guide Scheduling • This schedule can be (optionall y) applied to any Access C ontrol Group. • Blocking will be performed dur ing the scheduled time (between the "Start" and "Finish" times.) • Two (2) separate sessions or periods can be defined.
Security Configuration Services Services are used in defining traffic to be bl ocked or allowed by the Access Control or Fire- wall Rules features. Many comm on Services are pre-defined, but you can al so define your own services if required. To view the Services screen, select the Services link on the Securit y menu.
LevelOne Broadband VPN Gateway User Guide Cancel Clear the " Add New Service " area, ready for entering data for a new Service. 66.
Chapter 8 VPN This Chapter describes the VPN c apabilities and configuration required for common situations. Overview This section describes the VPN (Virtual Pri vat e Network) support provided by y our LevelOne Broadband VPN Gateway.
LevelOne Broadband VPN Gateway User Guide • Phase I is the negotiati on and establishm ent of the IKE connection. • Phase II is the negotiation and est ablishm ent of the IPsec connection. Because the IKE and IPsec connections are separa te, they have different SAs (security associa- tions).
VPN Common VPN Situations VPN Pass-through Figure 44: VPN Pass-through Here, a PC on the LAN behind the Router/Gat eway is using VPN software, but the Router/Gateway is NOT acting as a VPN endpoint. It is onl y allowing the VPN connect ion. • The PC software can use any VPN protocol supporte d by the remote VPN.
LevelOne Broadband VPN Gateway User Guide Connecting 2 LANs via VPN Figure 46: Connecting 2 VPN Gateways This allows two (2) LANs to be connected. PCs on each endpoint gain secure access to the remote LAN. • The 2 LANs MUST use different IP address ranges.
VPN VPN Policies This section covers the configurati on re quired on the LevelOne Broadband VPN Gate way when using Manual Key Exchange (Manual Policies) or IKE (Autom atic Pol icies). Details of using Certificates are cov ered in a later section. VPN Policies Screen To view this screen, select VPN Policies from the VPN menu.
LevelOne Broadband VPN Gateway User Guide Move There are 2 ways to change the order of policies: • Use the up and down indicators on the right t o move the selected row. You must confirm your changes by cli cking "OK". If you change your mind before cl icking "OK", click "Cancel" to reverse your changes.
VPN Figure 49: VPN Wizard - General General Settings Policy Name Enter a suitable name. This name is not supplied to the remote VPN. It is used only to help you m anage the policie s. Enable Policy Enable or disable the policy as re quired. For each remote VPN, only 1 policy can be enabled at any time.
LevelOne Broadband VPN Gateway User Guide Figure 50: VPN Wizard - Traffic Selector • For outgoing VPN conn ections, these settings determine which traffic will cause a VPN tunnel to be created, and which tra ffic will be sent through the tunnel.
VPN Remote IP addresses Type • Single address - enter an IP address in the "Start IP address" field. • Range address - enter the starting IP address in the "Start IP address" field, and the finish IP address in the "Finis h IP ad- dress" field.
LevelOne Broadband VPN Gateway User Guide These settings must match t he remote VPN. Note that you cannot use both AH and ESP. Manually assigned Key s AH Authentication AH (Authentication Header) specifi es the authenticat ion protocol for the VPN header, if used.
VPN • Click "Next" to view the final screen. • On the final screen, click "Finish " to save your settings, then "Close" to exit the Wizard. IKE Phase 1 If you selected IKE , the following screen is displayed after th e Traffic Selector screen.
LevelOne Broadband VPN Gateway User Guide IKE Exchange Mode Select the desired option, and ensure the rem ote VPN endpoint uses the same mode. Main Mode provides iden tity protection for the hosts initiating the IPSec session, but take s slightly longer to complete.
VPN ESP Encryption ESP (Encapsulating Security Payload) provides security for t he payload (data) sent through the VPN tunnel. Generally, you will want to enable both ESP Encrypti on and ESP Authentication. Select the desired m ethod, and ensure the remote VPN endpoint uses the same m ethod.
LevelOne Broadband VPN Gateway User Guide Certificates Certificates are used to authen ticate users. Certificates are issued to you by various CAs (Certification Authorities). These Certificates are called "Self Certificates". Each CA also issues a certificat e to itself.
VPN Adding a Trusted Certificate 1. After obtaining a new Cert ificate from the CA, you need to upload it t o the LevelOne Broadband VPN Gateway. 2. On the "Certificates" scr een, click the "Add Trusted Certificate" button to view the Add Trusted Certificate screen, shown below.
LevelOne Broadband VPN Gateway User Guide Subject Name This is the name which other or ganizations will see as the Holder (owner) of this Certi ficate. This should be your registered business name or offi cial company nam e. Gener- ally, all Certi ficates should have the same val ue in the Subject field.
VPN Figure 58: Add Self Certificate (3) 8. Upload the Certificate: • Click the "Browse" button, and locat e the certificate file on your PC • Select th e file. The name will appear in the "Certificate File" field. • Click "Upload" to upload the certificate file t o the LevelOne Broadband VPN Gate- way.
LevelOne Broadband VPN Gateway User Guide CRLs CRLs are only necessary if using Certificates. CRL (Certificat e Revocation List) fil es show Certificates whi ch have been revoked, and are no longer valid. Each CA issues their own C RLs. It is VERY IMPORTANT to keep your CRLs up- to-date.
VPN VPN Status This screens lists all VPN SAs (Security Association) wh ich exist at the current time. • If no VPN tunnels exist at the current time, the table will be empty. • To update the display, cli ck the "Refresh" button. • If using IKE, there is one SA for the IKE connection, and anot her SA for the IPSec connection.
LevelOne Broadband VPN Gateway User Guide Examples This section describes som e examples of using the LevelOne Broadband VPN Gateway i n comm on VPN situations. Example 1: Connecting 2 LevelOne Broadband VPN Gateways In this example, 2 LANs are connected via VPN.
VPN IKE Authentication method Pre-shared Key Pre-shared Key Certificates are not widely used. Pre-shared Key Xxxxxxxxxx Xxxxxxxxxx Must ma tch IKE Authentication algorithm MD5 MD5 Mu st match IKE Encr.
LevelOne Broadband VPN Gateway User Guide Example 2: Windows 2000/XP Client to LAN In this example, a Windows 2000/XP cl ient connects to the LevelOne Broadband VPN Gate- way and gains access to the local LAN.
VPN DH Group Group 1 (768 bit) Must mat ch client PC IKE SA Life tim e 28800 Does not have to match client PC. Shorter period will be used. IKE PFS Disable Must match client PC IPSec SA Parameters IPSec SA Life time 28800 Do not have to match. Shorter period will be used.
LevelOne Broadband VPN Gateway User Guide Figure 65: Windows 2000/XP - Policy Properties • Note that no rules are in use. Two 2 rules are required - incom ing and outgoing. • Th e outgoing rule will be added first. 6. Deselect the "Use Add Wizard" checkbox, then click "Add" to view the screen bel ow.
VPN Figure 67: Filter Properties: Addressing 8. Enter the Source IP address and the Destination IP address . • Sin ce this is the outing filter, the Source IP address is "My IP address" and the Desti- nation IP address is the address range used on the rem ote LAN.
LevelOne Broadband VPN Gateway User Guide Figure 69: New Rule Properties: Filter Action 11. Select Require Security , then click the "Edit" button, to view the Requi re Security Proper- ties screen. Figure 70: Require Security Properties 12.
VPN Figure 71: Modify Security Method 13. On the resulting screen (above), select High [ ESP] then click "OK" to save your changes and return to the Require Security Properties screen.
LevelOne Broadband VPN Gateway User Guide 15. Click the Tunnel Setting tab, then select The tunnel endpoint is specified by this IP ad- dress . Enter the WAN (Internet) IP address of the LevelOne Broadband VPN Gateway, as shown below. Figure 73: Tunnel Setting 16.
VPN 19. Click "Close" to retu rn to the DUT to Win2K properti es screen . The "To DUT" filter should now be listed, as shown bel ow. Figure 75: Windows 2000/XP Client to Level One Broadband VPN Gateway 20. To add the second (outgoing) rule, cli ck "Add".
LevelOne Broadband VPN Gateway User Guide Figure 77: Filter Properties: Addressing 22. Click "OK" to save your changes, then "Cl o se". Figure 78: Filter List 23. Ensure the "To W in2K" filter is selected, then click the Filter Action tab.
VPN Figure 79: Filter Action 24. Select Require Security , then click "Edit". On the Require Security Methods screen below, select Negotiate security . Figure 80: Security Methods 25. Click the "Add" butt on. On the resulting Modify Security Method screen below, select High [ESP] .
LevelOne Broadband VPN Gateway User Guide Figure 81: Modify Security Method 26. Click "OK" to save you r changes, then click "OK" again to return to the Filter Action screen. 27. Select the Tunnel Setting tab, and en ter the WAN (Internet) IP address of this PC (172.
VPN Figure 83: Authentication Method 29. Select Use this string to protect the key exchange (preshared key) , then enter your pre- shared key in the field provided. 30. Click "OK" to save you r settings, then "Close" to return to th e DUT to Win2K Properties screen.
LevelOne Broadband VPN Gateway User Guide Figure 85: Properties - General Tab 32. Click the "Advanced" button to see t he screen below. Figure 86: Key Exchange Settings 33.
VPN Figure 87: Key Exchange Security Methods 34. Select the first entry, and click the "Edit" button to see the followin g screen. Figure 88: IKE Security Algorithms 35. Select "SHA1" for Integrity Algorithm , "3DES" for Encryption algorithm , and "Low(1)" for the Diffie-Hellman Group .
LevelOne Broadband VPN Gateway User Guide Example 3: Windows 2000 Server to VPN Gatew ay In this example, a Windows 2000 Server connects t o the LevelOne B roadband VPN Gateway.
VPN Windows 2000 Server Configuration Configuration is t he same as for Example 2: Window s 2000/XP Client t o except for specifying the Source and Destination ad dresses for the "Filter Properties". Instead, for both IP Filters, the Filter Properties- Addressing should be completed as follows.
Chapter 9 Other Features and Settings This Chapter explains the screens and settings available via the "Other" menu. Overview Normally, it is not necessary to use these scr eens, or change any settings. These screens and settings are provided to deal with non-standard situations, or to provide additional options for advanced users.
Other Features and Settings PC Database The PC Database is used whenever you need to select a PC (e.g. for the "DMZ" PC). It elimi- nates the need to enter IP addresses. Also, y ou do not need to use fixed IP addresses on your LAN. PC Database Screen An example PC Data base screen is shown below.
LevelOne Broadband VPN Gateway User Guide Data - PC Database Screen Known PCs This lists all current entries. Data displayed is name (IP Address) type . The "type" indicates whether the PC is connected to the LAN. Name If adding a new PC to the list, en ter its nam e here.
Other Features and Settings PC Database (Admin) This screen is display ed if the "Advanced Admi nistration" button on t h e PC Database is clicked. It provides m ore control than the standard PC Database screen. Figure 93: PC Database (Admin) Data - PC Database ( Admin) Screen Known PCs This lists all current entries.
LevelOne Broadband VPN Gateway User Guide MAC Address Select the appropriate option • Automatic discovery - Select this to have the LevelOne Broad- band VPN Gateway contact the PC and fi nd its MAC address. This is only possibl e if the PC is connected to the LAN and pow- ered On.
Other Features and Settings Remote Administration This feature allows you to m anage the Leve lOne Broadband VPN Gateway via the Internet. Figure 94: Remote Administration Screen Data - Remote Administration Screen Remote Administration Enable Remote Administration Enable to allow administration via the Internet.
LevelOne Broadband VPN Gateway User Guide Routing Overview • If you don't have other Routers or Gateway s on your LAN, you can ignore the "Routing" page completely.
Other Features and Settings Figure 95: Routing Screen Data - Routing Screen RIP Enable RIP Check this t o enable the RIP (Routing Inform ation Protocol) feature of the LevelOne Broadband VPN Gateway. The LevelOne Broadband VPN Gateway supports R IP 1 only.
LevelOne Broadband VPN Gateway User Guide Add Add a new entry to the Stati c Routing table, usi ng the data shown in the "Properties" area on screen. Th e entry selected in the list is ignored, and has no effect. Update Update the current St atic Routing Table entry, using the data shown in the "Properties" area on screen.
Other Features and Settings Static Routing - Example Figure 96: Routing Example For the LevelOne Broadband VPN Gateway 's Routing Table For the LAN shown above, with 2 routers a nd 3 LAN segm ents, the LevelOne Broadband VPN Gateway requires 2 entries as follows.
LevelOne Broadband VPN Gateway User Guide Upgrade Firmware The firmware (software) in the LevelOne B roadband VPN Gateway can be upgraded using your Web Browser. You must first downl oad the upgrade file, then select Upgrade on the Other menu. You will see a screen like the following.
Other Features and Settings UPnP An example UPnP screen is shown bel ow. Figure 98: UPNP Screen Data - UPNP Screen UPnP Enable UPnP Services • UPnP (Universal Plug and Play) allows autom atic discovery and configuration of equipm ent attached to your LAN.
116 A Appendix A T roubleshooting This Appendix covers the most likely probl ems and their solutions. Overview This chapter covers some comm on problems that m ay be encountered while using the Leve- lOne Broadband VPN Gateway and som e possible solutions to them.
Appendix A - Troubleshooting check your Internet connection (DSL/C able modem etc) to see that it is working correctly. Problem 2: Some applications do not run properly when using the LevelOne Broadband VPN Gateway. Solution 2: The LevelOne Broadband VPN Gateway processes the data passing through it, so it is not transparent.
118 B Appendix B Specifications LevelOne Broadband VPN Gateway Model FBR-1404TX Dimensions 141mm(W) * 100m m(D) * 27mm(H) Operating Temperature 0 ° C to 40 ° C Storage Temperature -10 ° C to 70 ° .
Appendix B - Specifications FCC Radiation Exposure Statement This equipment complies with FCC RF radiat ion exposure limits set forth for an uncontrol led environment. Thi s equipment shoul d be installed and operated with a mi nimum distance of 20 centimeters bet w een the radiat or and your body.
Ein wichtiger Punkt beim Kauf des Geräts LevelOne FBR-1404TX (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie LevelOne FBR-1404TX noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für LevelOne FBR-1404TX - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von LevelOne FBR-1404TX reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über LevelOne FBR-1404TX erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon LevelOne FBR-1404TX besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von LevelOne FBR-1404TX verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit LevelOne FBR-1404TX. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei LevelOne FBR-1404TX gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
