Benutzeranleitung / Produktwartung CD-208 des Produzenten Lenoxx Electronics
Zur Seite of 21
IB-CD208(LC)-WM-E-060403 PLA YS REGULAR MUSIC CD DISCS & MP3 ENCODED DISCS FULL Y PROGRAMMABLE PLA YBACK 45 SECOND (CD) & 120 SECOND (MP3) ANTI-SKIP PROTECTION RECEIVES AM/FM S.
IB-CD208(LC)-WM-E-060403 1 TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IB-CD208(LC)-WM-E-060403 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
IB-CD208(LC)-WM-E-060403 CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET , READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries).
IB-CD208(LC)-WM-E-060403 Y ou can use the AC power or batteries as a power source. 4 T o a wall outlet Replace all the batteries with new ones when the POWER lamp dims or the player stops operating. Before you replace all the batteries, be sure to take out the disc from the player and remember to check the Battery Safety Instructions on Page 3.
IB-CD208(LC)-WM-E-060403 1 3 2 Connect the supplied AC power cord or batteries (refer to page 4). PLA YING A CD POWER lamp Slide the FUNCTION switch to the MP3/CD position (power on), the POWER lamp will be on, and the symbol starts a new cycle in the display .
IB-CD208(LC)-WM-E-060403 To Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback Go to the next track Go back to the previous track Locate a point in a song When the CD play is paused, the track number currently playing will flash and no music will play .
IB-CD208(LC)-WM-E-060403 Y ou may have repeat, intro and random play functions by pressing the REPEA T button. Press the REPEA T button several times, the display will show the followings in turn: CD REPEA T , INTRO AND RANDOM PLA Y 7 Single T rack Repeat Plays one song over and over till you press STOP .
IB-CD208(LC)-WM-E-060403 CD PROGRAMMED PLA Y T o change the current program Just create a new program following the above programming procedure. T o cancel Programmed Play Press the STOP button twice, the word PROGRAM will disappear from the display .
IB-CD208(LC)-WM-E-060403 1 2 3 Connect the supplied AC power cord or batteries (refer to page 4). MP3 PLA YBACK CD DOOR FUNCTION switch Close the CD DOOR, the display will show all the symbols as illustrated. The player will automatically play all the songs of the MP3 disc.
IB-CD208(LC)-WM-E-060403 Operation Press Display window shows T o pause play T o release pause and resume play T o skip to the next track(s) T o skip to the previous track(s) SKIP/SEARCH FORWARD butto.
IB-CD208(LC)-WM-E-060403 MP3 REPEA T , INTRO AND RANDOM PLA Y Y ou may have repeat, intro or random play functions by pressing the REPEA T button. Press the REPEA T button several times, the display will show the followings in turn: All T racks Repeat (Disc Repeat) Repeats all songs in order till you press the STOP button.
IB-CD208(LC)-WM-E-060403 MP3 PROGRAMMED PLA Y During programming, the word PROGRAM shows in the display . T o program play in your preferred order , follow steps below: 1. Slide the FUNCTION switch to the MP3/CD position. Make sure the set is in STOP mode.
IB-CD208(LC)-WM-E-060403 BASIC INTRODUCTION TO MP3 MP3 files are music files which have been compressed into the MP3 format. The player plays MP3 files which have been written onto a CD disc. T o play MP3 files on this player, you will need to make (record) a disc with these MP3 files on them.
IB-CD208(LC)-WM-E-060403 ABOUT MP3 WHA T IS THE MP3? MP3 (MPEG 1 Audio Layer-3) is a standard technology and format for compressing a sound sequence. The file is compressed to about 1/10 of its original size. Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed.
IB-CD208(LC)-WM-E-060403 1 2 3 Tune into the station you prefer using the TUNING knob. Adjust for the clearest sound. 4 This indicator will light up when receiving an FM Stereo broadcast. LISTENING TO THE RADIO Connect the supplied AC power cord or batteries (refer to page 4).
IB-CD208(LC)-WM-E-060403 To Slide or Adjust Adjust the volume Turn off the Radio • Next time you want to listen to the radio, just slide the FUNCTION switch to the RADIO position. The player will automatically start playing the previously tuned station.
IB-CD208(LC)-WM-E-060403 PRECAUTIONS On Operation If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the DISC player section. Should this occur , the player will not operate properly .
IB-CD208(LC)-WM-E-060403 Cleaning the cabinet Wipe with a soft cloth. If the cabinet is very dirty , dampen (not dripping wet) the cloth with a weak solution of soapy water , and then wipe clean. Cleaning the lens A dirty lens will cause sound skipping.
IB-CD208(LC)-WM-E-060403 The sound is weak or has poor quality . CD/MP3 does not play while the radio may continue to play . It is normal since the radio uses less power than the CD/MP3 player . 19 I nsert the AC plug into a wall outlet securely .
IB-CD208(LC)-WM-E-060403 Power source: Speakers: 2 - 3 1/2 8 ohm Output power: 1.8W/channel Dimensions: 20 NOTE: CD-Rs or CD-RWs playback capability at this CD/MP3 player may vary depending on quality of media, CD-Burner , speed of burning and application software.
Ein wichtiger Punkt beim Kauf des Geräts Lenoxx Electronics CD-208 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lenoxx Electronics CD-208 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lenoxx Electronics CD-208 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lenoxx Electronics CD-208 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lenoxx Electronics CD-208 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lenoxx Electronics CD-208 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lenoxx Electronics CD-208 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lenoxx Electronics CD-208. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lenoxx Electronics CD-208 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
