Benutzeranleitung / Produktwartung LD 035 des Produzenten Lanier
Zur Seite of 135
y our doc ument ma nage ment pa r tner Operator ’ s Guide LD 035/LD 045 LD 035/LD 045 LD 035/LD 045 LD 035/LD 045 Copy Reference.
Introdu ction This man ual desc ribes d etaile d instr uctions o n the operatio n and notes ab out the use of this m achine. To get ma ximum vers atilit y from thi s machi ne all o perators a re reque sted to r ead thi s manual c arefull y and foll ow the ins tructio ns.
Introdu ction This man ual desc ribes d etaile d instr uctions o n the operatio n and notes ab out the use of this m achine. To get ma ximum vers atilit y from thi s machi ne all o perators a re reque sted to r ead thi s manual c arefull y and foll ow the ins tructio ns.
Introdu ction This man ual desc ribes d etaile d instr uctions o n the operatio n and notes ab out the use of this m achine. To get ma ximum vers atilit y from thi s machi ne all o perators a re reque sted to r ead thi s manual c arefull y and foll ow the ins tructio ns.
Declara tion of C onformity “ The Produ ct complies with the requ irements of the EMC Dir ective 89 /336/EEC and i ts amendin g di- rectiv es and the L ow Voltage Directi ve 73/23/ EEC and its amending directi ves. ” In accor dance with IEC 60417, this m achine uses the fol lowing s ymbols for the main p ower swi tch: a a a a means POWER O N.
Introdu ction This man ual desc ribes d etaile d instr uctions o n the operatio n and notes ab out the use of this m achine. To get ma ximum vers atilit y from thi s machi ne all o perators a re reque sted to r ead thi s manual c arefull y and foll ow the ins tructio ns.
Declara tion of C onformity “ The Produ ct complies with the requ irements of the EMC Dir ective 89 /336/EEC and i ts amendin g di- rectiv es and the L ow Voltage Directi ve 73/23/ EEC and its amending directi ves. ” In accor dance with IEC 60417, this m achine uses the fol lowing s ymbols for the main p ower swi tch: a a a a means POWER O N.
i Manuals f or This M achine The following manuals describe the operational pro cedures of this machine. For particular functions, see the relevant parts of the manual. Note ❒ Manuals provided are specific to machine type. ❒ Adobe Acr obat Reader is necessary to view the man uals as a PDF file.
ii ❖ ❖ ❖ ❖ Manuals for DeskTopBind er V2 Lite DeskTopB inder V2 Lit e is a util ity includ ed on the CD-ROM labe led "S canner Driv er & D ocume nt M anage ment Ut ilitie s".
iii What You Can Do with This Machine 2-sided 2 P ages 2-sided 1 P age (see p .47 " 2 Sided 4 P ages Combine 2 Side") Front Front Back Back Front Back Front Back T ypes of Duplex Copies 1-sided 4 P ages 2-sided 1 P age (see p .47 " 1 Sided 4 P ages Combine 2 Side") 2-sided 4 P ages 2-sided 1 P age (see p .
iv Copying Book Originals 1-sided 4 P ages Booklet (see p.50 " 1 Sided Booklet") 4 3 2 1 4 3 2 1 Open to Left 3 1 Open to Right 3 1 4 3 2 1 1 2 3 4 2-sided 2 P ages Booklet (see p.51 " 2 Sided Booklet") Open to Left Open to Right Open to Left Open to Right 1-sided Magazine (see p .
v Combining Multiple P ages onto a Single P age (see p.45 " One-Sided Combine") 1-sided 2 P ages 1-sided 1 P age 2-sided 1 P age 1-sided 1 P age 1-sided 4 P ages 1-sided 1 P age 2-sided 2 P .
vi TABLE OF CONTENTS Manuals for This Machine ...... ..... ........ ........ ........ ..... ........ ........ ..... ........ ........ ........ . i What You Can Do with This Mach ine ......... ........ ........ ..... ........ ........ ..... ........ ..
vii Positive/Negative ... ....... .......... .......... .......... ....... .......... .......... .......... ...... .......... ........ 55 Erase .. .......... ....... .......... .......... .......... ...... ........... .......... ...... .......... ....
viii Adonis C3_GBc opyF_FM 1.book Page v iii Thu rsday, N ovember 28, 2002 1:53 PM.
1 How to Read This Manual Symb ols In th is manual, the following symbols are used: R WARNING: This symbol ind icates a potentially hazardous situation that migh t result in death or serious i njury when you misuse the machine w ithout following the in- structi ons under t his symbol.
2 Machi ne Types This machine comes in two models which vary by copy speed. To make sure which mo del you have, see th e inside front co ver of this ma nual. Type 1 Type 2 Copy speed 35 copies/minute (A4 K , 8 1 / 2 " × 11" K ) 45 copies/minute (A4 K , 8 1 / 2 " × 11" K ) Adonis C3_GBc opyF_FM1.
3 Functions that Require Options The av ailab le function s depend on your mach ine conf igurat ion and wh ich op- tions you have. See the table below. ❍ Require d op tions *1 The bridge unit and paper tray unit are re quired when y ou install the finisher.
4 Control Panel Note ❒ This il lustra tion show s the con trol pa nel of th e machi ne with o ptions f ully in- stalled. 1. Screen Con trast knob Adjusts the brightness of the display pan- el. 2. Indicators These indicators show the status of the machine or indicate errors.
5 11. Oper ation swi tch Press this switch to turn the power on (the On indicator g oes on). To turn th e power off, press this switch again (the On indicator g oes off). 12. { { { { Sample Cop y } } } } key Use this key to m ake a single sample copy before starting a l ong copy run.
6 Display Panel Note ❒ The following i llustrations are examples for th e machine with the optional 2 Tray finisher and large capac ity tray (LCT) installed. ❖ ❖ ❖ ❖ Initi al copy displ ay 1. Ori ginal m ode, Im age Den sity and Special Original mode.
7 1. Placing Originals Origina ls Sizes a nd Weights of Recommended Originals ❖ ❖ ❖ ❖ Metric version ❖ ❖ ❖ ❖ Inch version Note ❒ The nu mber of originals that can be placed in the Auto Document Feeder is about 80. ❒ The w eigh t range for orig inals in the M ixed Size m ode is 5 2 – 81 g/m 2 , 13.
Placing Origi nals 8 1 • Perfor ated or torn origina ls • Curled, fo lded, or creased or iginals • Pas ted origin als • Originals with any kind of coating, su ch as thermal fax pap er, art pap.
Origin als 9 1 ❖ ❖ ❖ ❖ Exposure glass ❖ ❖ ❖ ❖ Auto Document Feeder Note ❒ When you copy custom size originals, make sure you sp ecify the size of the originals. If not, th e image may no t be copied properly. S ee p.14 “ Placing cus- tom size origin als ” .
Placing Origi nals 10 1 Placing Or iginals Note ❒ Place original s after c orrection flu- id and ink have comp letely dri ed. Not taking this precaution could dirty the exposure glass with mark s that wi ll be copied . Referenc e For or igina l size s you can set , se e p.
Placin g Originals 11 1 B B B B Select the original orientation. Standard orientation A M a k e s u r e t h a t i s s e l e c t - ed. 90 ° turn A Place your original in the land- scape orientation, and then press . C C C C Pre ss [ OK ] . Placing Originals on t he Exposure Glass A A A A Lift the exposur e glass cover or the ADF.
Placing Origi nals 12 1 Placing Ori ginals in the Auto Docu ment Fee der Settings shou ld be made in the fol- lowing situations: ❖ ❖ ❖ ❖ When placing ori ginals one by one: p.13 “ SA DF mode ” ❖ ❖ ❖ ❖ When placing ori ginals consisting of more than 8 0 pages: p.
Placin g Originals 13 1 B B B B Sele ct [ Batch ] , and the n pres s [ OK ] . Note ❒ When [ Batch ] is not displayed, change the set tings. See p.101 “ Switch to Batc h (SADF) ” . C C C C Place the first part of the original, and then press the { { { { Start } } } } key.
Placing Origi nals 14 1 A A A A Pre ss [ Spec ial Ori gina l ] . B B B B Pre ss [ Mixed Size ] , a nd then pres s [ OK ] . C C C C Align the rear and left edges of the originals as shown. 1. Place i nto the ADF 2. Vertical size D D D D Adjust the guide t o the widest original size.
15 2. Copying Basi c Procedure A A A A When the machine is set for user codes, enter a user code (up to 8 digits) with the number keys, an d then press the { { { { # } } } } key. The ma chine is ready to copy. Referen ce For users codes, see “ Key O per- ator Tools ” , Genera l Settings Guide .
Copying 16 2 Interrupt Copy Use this function if you want to inter- rupt a long copy job to make urgently needed c opies. Limitatio n ❒ You cannot use the I nterrup t Copy function when fax originals are be- ing scanned or the s canner fu nc- tion is b eing use d.
Basic P rocedure 17 2 Job Prese t You ca n set up the next copy co ntent during copyi ng. If a long c opy job is in progress a nd you do not want to wait for it to f in- ish, you can use this function to set up the next c opy job in advance. Wh en the cu rrent copy job i s finish ed, the next j ob will start au tomaticall y.
Copying 18 2 Copying from the By pass Tray Use th e bypass tray to co py onto OH P transparencies, adhesive l abels, trans- lucent pa per, postc ards and copy pa- p e r t h a t c an no t b e l oa de d in t he p a p er tray s. Prep arat ion When t he duplex un it is attached , the d efault is [ 1 Sided → → → → 2 Si ded ] .
Copying f rom the Bypass Tray 19 2 Note ❒ If the guides are not flush with the co py pape r, image s migh t be skewed or paper misfeeds might occur. ❒ Do not stack paper over the lim- it ma rk, otherw ise im ages might be skew ed or paper mis- feeds might occur.
Copying 20 2 D D D D Place your originals, and then pre ss th e { { { { Start } } } } key. Note ❒ When cop ying onto O HP trans- parencies, remove copied sheets one by one. E E E E When yo ur copy job is finis hed, press the { { { { Clear Modes } } } } key to clear the s ettings.
Copier Fu nctions 21 2 Copier Functi ons Adjustin g Image Density There ar e three types of ad justment available: ❖ ❖ ❖ ❖ Auto Image Density The machine autom atically adjusts image de nsity. ❖ ❖ ❖ ❖ Manual image density You can adju st the density of the ov erall orig ina l in s even incr e- ment s.
Copying 22 2 Selecting Origina l Type Set tin g Select one o f the following six types to match your or iginals: ❖ ❖ ❖ ❖ Text Select t his mode whe n your o rigi- nals contain o nly text (no pictures). ❖ ❖ ❖ ❖ Text/Phot o Select [ Text/Photo ] wh en your origi- nals contai n photographs or pic - tures w ith text.
Copier Fu nctions 23 2 Selecting Copy Paper There are t wo ways to select copy paper: ❖ ❖ ❖ ❖ Auto Paper Select The machine selects a suitable siz e of copy paper automatically based on orig- inal size and reproduc tion ratio.
Copying 24 2 Auto Paper Select A A A A Make s ure t hat [ Auto Paper Sel ect ] is s elected. Note ❒ Trays with a key mark will not be automatically selected. See “ Paper Type ” in “ Tray Pa per Setti ngs", General Settings Guide . Manual Paper Select A A A A Sele ct t he pa per t ray, bypa ss t ray o r the LCT.
Copier Fu nctions 25 2 - - - - Rotated cop y If t he orien tation in which your or iginal is plac ed ( L or K ) is different from that of the p aper you are copyin g onto, this f unction r otates the ori ginal ima ge by 90 ° to fi t it on the co py pap er.
Copying 26 2 Preset Reduce/ Enlarge You ca n select a preset ra tio for copy- ing. ❖ ❖ ❖ ❖ Base Point The base point of Reduce/Enlarge differs depending o n how the orig- inal is scanned. When the original is placed on the exposure gla ss, the upper l eft corne r will be the bas e po int.
Copier Fu nctions 27 2 A Press [ Cr eate Mar gin ] displ ayed o n the initi al display. B If you do no t want to comb ine it with the Reduce/Enlarg e function, place your origi nals, and t hen press t he { { { { Sta rt } } } } key. Zoom You can chan ge the repro ductio n ra- tio in 1 % steps .
Copying 28 2 Auto Reduce/Enlarge The machi ne can choose an appropri- ate reproduction ratio based on the paper a nd origin al size s you sel ect. Note ❒ You cannot use t he bypass tray with th is f unctio n.
Copier Fu nctions 29 2 B B B B Pre ss [ Specifd. Ratio ] . C C C C Make s ure tha t [ Spec ifd. Ratio ] is highlighted. D D D D Enter the length of the original with the number keys , and then pre ss th e [ # ] key.
Copying 30 2 D Enter the desired ratio with the numb er ke ys, follo wed b y [ # ] . E Press [ OK ] . To specify a ratio w ith [ n n n n ] and [ o o o o ] A Press [ With n n n no o o o ] . B Press [ Horizontal ] . C Adjust the ratio using [ n n n n ] or [ o o o o ] .
Copier Fu nctions 31 2 A A A A Pre ss [ Reduce/Enl arge ] . B B B B Pre ss [ Specifd. Ratio ] . C C C C Pre ss [ Di r. Size Mag mm ] . D D D D Enter the horizontal size of the origina l with the number keys, and then press [ # ] . E E E E Enter the horizontal size of the copy with t he number keys, and then press [ # ] .
Copying 32 2 ❖ ❖ ❖ ❖ Shift So rt • 1000-Sheet f inisher (optional ) Each time the copies of one set or those of each job are deliv- er ed, the n ext cop y is shi ft ed when delivered so you can sep- arate each set or jo b.
Copier Fu nctions 33 2 B B B B Enter the number of copy sets with the number ke ys. Note ❒ To confirm the ty pe of finishing, press the { { { { Sample Copy } } } } key. See p.33 “ Sampl e cop y ” . C C C C Place your originals. Note ❒ When placing an original on t he exposure glass, start with the first page to be copied.
Copying 34 2 Changing the nu mber of sets You can change the number of copy sets during c opying. Note ❒ This function can only be used when the Sort function is turned on. A A A A While "Copying" is displayed, pre ss th e { { { { Clear/Stop } } } } key.
Copier Fu nctions 35 2 A A A A Pre ss [ Stack ] . B B B B Enter the number of copies with the numb er keys. C C C C Place your originals, and then press the { { { { Start } } } } key. Note ❒ When placi ng an original on t he exposure glass, start with the first page to be copied.
Copying 36 2 Stap ling p ositio n and orig inal settin g Place all the originals in the A DF in the o rientation in which they can be read nor- mally. When placing the original on t he exposure gl ass, keep the same orientatio n, but set the origin al facing down wards.
Copier Fu nctions 37 2 ❖ ❖ ❖ ❖ 2 Tray finisher Orig inal location Staplin g positio n *1 Exposure glass Auto Do cu- ment Feeder Top K L Top Slant K L Bottom K L Left 2 K *2 L STAPLEAE STAPLEBE STAPLECE STAPLE25 STAPLE26 STAPLE27 STAPLE28 STAPLE29 STAPLE30 STAPLEDE Adonis C3_GB copyF_F M1.
Copying 38 2 ❖ ❖ ❖ ❖ Booklet finisher Top 2 K L *2 Orig inal location Staplin g positio n *1 Exposure glass Auto Do cu- ment Feeder Top K L Bottom K L Left 2 K *2 L Orig inal location Staplin .
Copier Fu nctions 39 2 *1 This table shows the stapling positions, not the orientation of delivery. *2 Not avai lable for A3 and B4 J IS size paper. A A A A Select one of the stapling positions.
Copying 40 2 ❖ ❖ ❖ ❖ 2 Tray finisher ❖ ❖ ❖ ❖ Booklet finisher Note ❒ Whe n you se lect th e stap ling p ositio n, Sort mo de is a utomat ically selec ted. Referen ce p.36 “ Stapling pos ition and origin al setting ” B B B B Enter the number of copy sets with the number keys.
Copier Fu nctions 41 2 Punch The optiona l 2 Tray f inisher and the bridge unit are required to use this function. You can m ake punch hol es in copies. ❖ ❖ ❖ ❖ 2 holes ❖ ❖ ❖ ❖ 3 holes ❖ ❖ ❖ ❖ 4 holes Note ❒ You ca nnot use th e bypass tr ay with this function.
Copying 42 2 ❒ The rel ationsh ip between the or ientat ion in whi ch you pl ace the o riginal and the punch hole positions is as fo llows: ❖ ❖ ❖ ❖ Punch ho le positi ons *1 This table shows the pu nch hole positions, not the orientation of delivery.
Copier Fu nctions 43 2 A A A A Select one of the punch hole positions. B B B B Enter the number of copy sets with the number keys. C C C C Place your originals, and then press the { { { { Start } } } } key. Duplex There are t hree types of duplex. ❖ ❖ ❖ ❖ 1 Sided → → → → 2 Sided Copies 2 o ne-side d pages on one two-si ded page.
Copying 44 2 Original ori entation and completed c opies The r esulting copy i mage will di ffer according to the orientation in which you plac e your originals (verti cal K or horizontal L ). *1 The table shows the orientat ion of im- ages on the front and ba ck of copies, not the orientation of delivery.
Copier Fu nctions 45 2 ❒ When placing an original on t he exposure glass or in the ADF us- ing Batch mode , press the { { { { # } } } } key after all the originals have been scanned. Originals and copy orie ntation You can se lect the orientation. • Top to To p • Top to Bottom Note ❒ You can change the default orien- tation with User Tools.
Copying 46 2 ❖ ❖ ❖ ❖ Orientation of the o riginal and image positi on of co mbine Open to left R original s Open to top S originals ❖ ❖ ❖ ❖ Placing originals (o riginals placed i n the.
Copier Fu nctions 47 2 Two- Side d Co mbin e Combines various pages of originals into o ne sheet w ith two si des. ❖ ❖ ❖ ❖ 1 Sided 4 Pages → → → → Combine 2 Side Copies 4 one-sided origi nals to one sheet with two pages per side.
Copying 48 2 ❖ ❖ ❖ ❖ 2 Sided 16 Pages → → → → Combine 2 Side Copies 8 two-s ided ori gina ls to one sheet with eight pages per side. Referen ce Relat ed initial se ttings p.46 “ Orientatio n of the origi nal and image positi on of combine ” p.
Copier Fu nctions 49 2 Series Copi es Separately copies th e front and back of a t wo-si ded origi nal o r the two fa c- ing pages of a bound original onto two sh eets.
Copying 50 2 A A A A Pre ss [ Du p./Combine/Serie s ] . B B B B Pre ss [ Se ries/Book ] . C C C C Pre ss [ Series ] . D D D D Sele ct [ Book → → → → 1 Sided ] , [ Book → → → → 2 Sided ] , or [ Front&Ba ck → → → → 2 Sided ] , and then press [ OK ] .
Copier Fu nctions 51 2 ❖ ❖ ❖ ❖ Open to lef t ❖ ❖ ❖ ❖ Open to rig ht ❖ ❖ ❖ ❖ 1 Sided → → → → Magaz ine Copies two or more originals to m a k e c o pi e s i n p a g e o r d e r w h e n they are folded and stacked.
Copying 52 2 How to fold and unfold copie s to make a bookle t 1. Open to left 2. Open to right How to fold and unfold copie s to make a magazine Note ❒ You cannot use the bypass tray with t his functi on. ❒ The machine sets the reproduct ion ratio auto matically to me et the pa- per size.
Copier Fu nctions 53 2 Image Repeat The orig inal image is copied rep eat- edly . Note ❒ The number of repeated imag es depe nds on th e orig inal size, c opy paper siz e, and reprodu ction rati o.
Copying 54 2 Double Copies One original i mage is copied tw ice on one co py as show n. Note ❒ You cannot use t he bypass tray with th is f unctio n.
Copier Fu nctions 55 2 Centring You can make c opies with the image moved to the c entre. Note ❒ You cannot use t he bypass tray with th is f unctio n. ❒ The original sizes and orientations for centring are l isted below. ❖ ❖ ❖ ❖ Metric version ❖ ❖ ❖ ❖ Inch version A A A A Sele ct t he p aper.
Copying 56 2 B B B B Pre ss [ Edit Image ] . C C C C Pre ss [ Positive/Ne gative ] . D D D D Pre ss [ OK ] . E E E E Pre ss [ OK ] . F F F F Sele ct t he p aper. G G G G Place your originals, and then pre ss th e { { { { Start } } } } key. Erase This func tion erases the centr e and/or all four si des of t he origin al image.
Copier Fu nctions 57 2 Border erase A A A A Pre ss [ Edit/Stamp ] . B B B B Pre ss [ Erase ] . C C C C Set the erase bord er width. Selecting [ Same Width ] A Press [ Same Wi dth ] . B Set an eras e border width with [ n n n n ] and [ o o o o ] . Note ❒ To change the value entered, press [ n n n n ] and [ o o o o ] to set the new value.
Copying 58 2 Centre/Border erase A A A A Pre ss [ Edit/Stamp ] . B B B B Pre ss [ Erase ] . C C C C Pre ss [ Cent re/Border ] . D D D D Set the border to be erased. Selecting [ Same Width ] A Press [ Same Wi dth ] . B Press [ Centre ] , and t hen set the erase ce ntre width wi th [ n n n n ] and [ o o o o ] .
Copier Fu nctions 59 2 Note ❒ You can change the width of the binding margin as follows: A A A A Pre ss [ Edit/Stamp ] . B B B B Pre ss [ Marg in Adju stme nt ] .
Copying 60 2 C C C C Pre ss [ Bac kground Numbering ] . D D D D Enter the number to start count- ing fr om with t he number k eys, and then press [ OK ] . E E E E Pre ss [ OK ] . F F F F Pre ss [ OK ] . G G G G Place your originals, and then pre ss th e { { { { Start } } } } key.
Copier Fu nctions 61 2 C C C C Pre ss [ Preset Stamp ] . D D D D Sele ct the desi red mes sage . E E E E Pre ss [ Al l Pages ] or [ 1st Page only ] to sel ect the prin t pa ge. Note ❒ You can change the position, size, and dens ity of the stamp. See p.
Copying 62 2 Referenc e Relate d init ial set tings p.99 “ St amp Posit ion 1 - 4 ” p.99 “ St amp Format 1 - 4 ” A A A A Pre ss [ Edit/Stamp ] . B B B B Pre ss [ Stamp ] . C C C C Pre ss [ User Stamp ] . D D D D Select the stamp you requ ire. E E E E Pre ss [ Al l Pages ] or [ 1st Page only ] to sel ect the prin t pa ge.
Copier Fu nctions 63 2 F F F F Pre ss [ Program/Del ete Stam p ] . G G G G Pre ss [ Program ] , and t hen pres s the stamp num ber (1 – 4) you want to program. Note ❒ Stamp num bers with m already have setting s in th em. ❒ If the stam p number is already being used, t he machine will ask you if you want to over - write it .
Copying 64 2 I I I I Pre ss [ Exit ] . The displa y returns t o the Copi- er/Document Server Features main men u. J J J J Pre ss [ Exit ] . Exits settings and gets ready to copy. Date Stamp Use this f uncti on to p rin t dates on your co pie s. You can selec t from the following styles: • MM/DD/YYYY • MM.
Copier Fu nctions 65 2 B B B B Pre ss [ Stamp ] . C C C C Pre ss [ Dat e Stamp ] . D D D D Pre ss [ Al l Pages ] or [ 1st Page only ] to sel ect the prin t pa ge. Note ❒ You can change the font and po - sition of th e date to be stamp ed. See p.65 “ To change the style of date ” .
Copying 66 2 Stamp posi tion and orig inal orie ntation Note ❒ You cannot use t he bypass tray with th is f unctio n. Referenc e Relate d init ial set tings p.100 “ Font ” p.100 “ Size ” p.101 “ Superim pose ” p.100 “ Stamp Form at ” p.
Copier Fu nctions 67 2 Specify the first printing page an d what page to number If you selected (P1, P2…, -1-,-2-…, P.1, P.2…, 1, 2…, ) Note ❒ Below expl ains the example when (P1, P2...) i s selected. The steps are the same for other cases.
Copying 68 2 ❒ To change the numb er entered, press [ Clear ] or the { { { { Clear/Stop } } } } key, and t hen ente r a new number. C C C C Pre ss [ Numbering from/ to ] , and then enter the number of page from which to start numbering with the number keys, a nd then pr ess the { { { { # } } } } key.
Copier Fu nctions 69 2 Covers Using this function, you can create cover sheets by adding additional pages of different paper or copying existing pages on different paper. Prep arat ion Before selecting this function, set the tray for the fron t cover paper.
Copying 70 2 C C C C Sele ct [ Copy ] or [ Blank ] for t he cov- er sheet. D D D D Select the paper tray that contains the sheet paper to copy the origi- nals, and then press [ OK ] . E E E E Place your ori ginals in the ADF, and then press the { { { { Start } } } } key.
Copier Fu nctions 71 2 Chapter The page locations you specify with this function wi ll appear on the front of co py sheets. Prep arat ion Before se lecting this funct ion, press [ Dup./Combine/Series ] and se- lect Duple x (1 S ided → 2 Side d) mode o r Com bine mode.
Copying 72 2 • Blank Note ❒ Press the { { { { # } } } } key and select [ OHP Shee t ] in Special pape r. See p.19 “ When copying onto special pa- per ” . A A A A Pre ss [ Cover/Slip Sh eet ] . B B B B Pre ss [ Slip Sheet ] . C C C C Sele ct [ Copy ] or [ Bla nk ] , and then pre ss [ OK ] .
Stori ng Data in the Document Server 73 2 Storing Dat a in the Document Se rver The Docu ment Server enables you to store docum ents in t he memory and print them as you want. Important ❒ Data sto red in the ma chine might be lost if som e kind of fail ure oc- curs.
Copying 74 2 Programs You can store frequently used copy job se ttings in the m achine me mory and recall them for future use . Storing a Progr am Note ❒ You can store up to 1 0 program s.
Programs 75 2 F F F F Pre ss [ OK ] . When the settings are successfull y stored, m appears on the left s ide and the program name appears on the right side of the registered pro- gram number. The display returns to the initial copy display for a while .
Copying 76 2 Adonis C3_GB copyF_F M1.boo k Page 7 6 Thur sday, November 28, 20 02 1:5 3 PM.
77 3. Troubleshooting If Your Mac hine Does Not Operate As You Want When a Message Is Dis played The following cha rt contains explanations fo r the common messages . If other messages appear, follow the inst ructions as t hey are displayed. Note ❒ For messages that ar e not listed here, see General Settings Guide .
Troublesh ooting 78 3 Maxi mum nu mber of s ets is *. The numb er of copies ex - ceeds th e maximu m copy quantity. You ca n change t he maximu m copy quantity. See p.92 “ Max. C opy Quant ity ” . Cannot copy . Original is being scanne d by other func tion s.
If Yo u Cannot Make Clear Co pies 79 3 If You Cannot Make C lear Copies Prob lem Ca uses Sol ution s Copies appear di rty. The image densi ty is too dark. Adjust the image density. See p.21 “ Adjusting Image Density ” . Auto Image Densit y is n ot selected.
Troublesh ooting 80 3 If You Cannot Make Copies As You Want This section e xplains causes and remedies when co py results are not as expect- ed. ❖ ❖ ❖ ❖ Basic Prob lem Ca uses Sol ution s Copies are n ot stapled . Ther e are jammed staples in the stap ler.
If You Cannot Ma ke Copies As You Wan t 81 3 ❖ ❖ ❖ ❖ Edit ❖ ❖ ❖ ❖ Stamp ❖ ❖ ❖ ❖ Combine Prob lem Ca uses Sol ution s In Double Copies mode, parts of the ori ginal image are not copi ed. Combina tion of original and co py paper i s not cor- rect.
Troublesh ooting 82 3 ❖ ❖ ❖ ❖ Duplex When Memor y Is Ful l Note ❒ If you set [Memory Full Auto Scan Restart] in User Tools (see p.102 “ Memory Full Auto Scan R estart ” ) to [Yes], even if the memor y becomes full, the mem - ory overflow message will not be displayed.
83 4. User Tools (Copier/Do cumen t Server Features) User To ols Menu (Copier/Do cument Server Features ) User Tools Item Names Default General Features 1/4 See p.
User Tool s (Copi er/Document Serv er Featu res) 84 4 General Features 3/4 See p.93 “ General Features 3 / 4 ” . Copy Functi on Key : F 1 – F5 • F1: 1 Si ded → 2 Sided : T to T • F2: 2 Sid.
User Tools Menu (Copier/ Document Serv er Features ) 85 4 Reproduction Ratio 2/2 See p.94 “ Reproduction Ratio 2 / 2 ” . Reduce 1 – 6 Metric ve rsion • Reduce 1: 25% • Reduce 2: 50% • Redu.
User Tool s (Copi er/Document Serv er Featu res) 86 4 Edit 2/2 See p.96 “ Edit 2 / 2 ” . Image Repeat Separation Line None Double Co pies Separation Li ne None Separation Line in Combine None Copy.
User Tools Menu (Copier/ Document Serv er Features ) 87 4 Date Stamp Format Metric version: DD/MM/Y YYY Inch v ersion : MM/DD/Y YYY Font Fo nt 1 Stamp Position Metric version • Position: Top left • Top Margin: 8 mm • Left Margin: 32 mm Inch v ersion • Position: Top left • Top Margin: 0.
User Tool s (Copi er/Document Serv er Featu res) 88 4 Page Numb ering Stamp Pos ition Metric versi on • Position P1, 1/5, P.1, 1: Top right -1-, 1-1: Bottom centre • Top/Bottom Margin P1, 1/5, P.1, 1: 12 mm -1-, 1-1: 8 mm • Left/Rig ht M argin P1, 1/5, P.
Accessin g User To ols (Cop ier/Docu ment Serv er Featu res) 89 4 Accessi ng User Too ls (Copier/D ocument Server Features ) This sect ion is for the key operators in charge of this machine.
User Tool s (Copi er/Document Serv er Featu res) 90 4 General Feat ures 1 / 4 ❖ ❖ ❖ ❖ Auto Paper Select Priority As a defa ult, Auto Paper Select is selected.
Accessin g User To ols (Cop ier/Docu ment Serv er Featu res) 91 4 ❖ ❖ ❖ ❖ Auto Image Density Priority Set this function to use Auto Im age Density when the power is turned on, re set or m odes are cleared.
User Tool s (Copi er/Document Serv er Featu res) 92 4 General Feat ures 2 / 4 ❖ ❖ ❖ ❖ Dupl ex Mode Priority You can sel ect th e type of Duple x function effective when the ma- chin e is turn ed on, r eset, or modes are cleared.
Accessin g User To ols (Cop ier/Docu ment Serv er Featu res) 93 4 General Feat ures 3 / 4 ❖ ❖ ❖ ❖ Copy Functi on Key: F1- F5 You can assign frequently used functions to fun ction keys F1 to F5.
User Tool s (Copi er/Document Serv er Featu res) 94 4 Reproduction Ra tio 1 / 2 ❖ ❖ ❖ ❖ Short cut R /E You can regi ster up to three fre- quently used Reduce/Enlar ge ra- tios other than the f ixed Reduce/Enlarge ratio and have them shown on the init ial displ ay.
Accessin g User To ols (Cop ier/Docu ment Serv er Featu res) 95 4 ❖ ❖ ❖ ❖ Priority Setting: Reduce You can s et the ratio w ith prior ity when [ Reduce/Enlarge ] is presse d, followed by [ Reduce ] .
User Tool s (Copi er/Document Serv er Featu res) 96 4 Note ❒ Default: • Metric version: Right 5 mm • Inch version: Right 0.2" ❖ ❖ ❖ ❖ 1 Sided → → → → 2 Sided Auto Margin: TtoB In 1 sided → 2 sided D uplex mode, you can speci fy the margins on the back si de.
Accessin g User To ols (Cop ier/Docu ment Serv er Featu res) 97 4 ❖ ❖ ❖ ❖ Double Copi es Separation Li ne You can sele ct a separ ation line i n Doubl e Copies mo de from N one, Solid, Bro ken A, Bro ken B, or Cro p Mar ks.
User Tool s (Copi er/Document Serv er Featu res) 98 4 ❖ ❖ ❖ ❖ Orien tation: Book let, Magazi ne You c an sele ct the ty pe of or iginal s for Book let or M agazine mod e. Note ❒ Default: Open to Left Referen ce p.52 “ How to fold and unfold copies to mak e a bookl et ” p.
Accessin g User To ols (Cop ier/Docu ment Serv er Featu res) 99 4 Note ❒ Default: • Metric Ver sion: • Position : Top right • Top Margin : 24 mm • Right Margin: 24 mm • Inch Version: • Position : Top right • Top Margin : 1.0" • Right Margin: 1.
User Tool s (Copi er/Document Serv er Featu res) 100 4 Date Stamp ❖ ❖ ❖ ❖ Format You can sel ect the da te format for Date Stam p mode. Note ❒ Default: • Met ri c ve rs ion : DD/MM/YYYY • Inch version: MM /DD/YYYY ❖ ❖ ❖ ❖ Font You ca n sele ct the D ate Sta mp fon t.
Accessin g User To ols (Cop ier/Docu ment Serv er Featu res) 101 4 ❖ ❖ ❖ ❖ Page Nu mberin g in Com bine You can set pag e numbering when using the Combine function and the Page Num bering function to- gether.
User Tool s (Copi er/Document Serv er Featu res) 102 4 ❖ ❖ ❖ ❖ Auto Sort You c an speci fy whet her So rt mode is sel ected when the m a- chine is turned on or the mode is cleare d.
103 5. Specifications Combination C hart The com bination chart given below sho ws which modes can be used together. When you read the chart, see the following table: The f ollowing shows the com binat ions of func tions. ❍ means that these modes can be used toge ther.
Specificat ions 104 5 Supplemen tary Informations ❖ ❖ ❖ ❖ Mixed Size mode • Since small originals may not be correctly aligned w ith the original guide, the copy image may be slanted. • Copying speed and scanning speed will be reduced. • You can place originals of two different sizes at a time.
Supplement ary Infor mations 105 5 ❖ ❖ ❖ ❖ Inch version ❖ ❖ ❖ ❖ Zoom • The repr oduction ratios you can specif y are 25 – 400%. • You can s elect a rati o regardle ss of the siz e of an orig inal or cop y paper. With so me ratios, parts of th e image m ight not be co pied or ma rgins wi ll appear o n copies.
Specificat ions 106 5 ❖ ❖ ❖ ❖ Sort, Rotate Sort , Stack • Paper sizes and orientations th at can be used in t he Shift Sort and Stack function ar e as foll ows: *1 To pl ace 12" × 18" L size paper use t he byp ass tray .
Supplement ary Infor mations 107 5 *1 250 s heets when the o ption al brid ge un it is ins tal led. *2 125 s heets when the o ption al brid ge un it is ins tal led. *3 To pl ace 12" × 18" L size paper use t he byp ass tray . *4 B5 JIS L cannot be shifted .
Specificat ions 108 5 ❖ ❖ ❖ ❖ Staple • The fo llowin g type of paper ca nnot be st aple d: • Trans lucent pa per • OHP transparencies • Label paper (a dhesiv e labels) • Thick paper .
Supplement ary Infor mations 109 5 • Paper sizes and orientation that can be used in the Staple function and the sta pler cap acity are as fo llow s: Note ❒ When the num ber of copies exceed s tray capacity, copyi ng stops. If this happens, remove th e copies from the shi ft tray, and then resume c opy- ing.
Specificat ions 110 5 • The tray capacity for the stapled sheets are as follows: (paper weight: 80 g/m 2 , 20 lb .) • You cannot change stapling positions during c opying. • When the o riginal image is rotated , the staple orientati on changes by 90 ° .
Supplement ary Infor mations 111 5 • The maximum o riginal image si ze that can be rotate d is as fo llows: • W he n u s i n g [ T o p S l a n t ] , [ L e ft 2 ] o r [ T o p 2 ] w i t h C om b i n e , D o u b l e c op ie s or Auto Reduce/Enl arge function, “ Blank part wi ll appea r.
Specificat ions 112 5 ❖ ❖ ❖ ❖ Duplex • You cannot use the f ollowing copy paper with this function: • Paper sm aller than A 5 K , 5 1 / 2 " × 8 1 / 2 " K (possible on A5 L , 5 1 / 2 " × 8 1 / 2 " L ) • Paper thic ker than 105 g/m 2 , 28 lb.
Supplement ary Infor mations 113 5 ❖ ❖ ❖ ❖ Booklet/ Magazine • The mac hine sets the r eproduction r atio automatically t o meet the paper size and copies the or iginals together onto the pa per. • The repr oduction ratios you can specif y are 25 – 400%.
Specificat ions 114 5 ❖ ❖ ❖ ❖ Margin Adjust ment • If you set a binding mar gin that is too wide, part of the image may not be copied. • When ma king copies in Com bine mode, the binding m argin is added to the copies after the combination is finished.
Supplement ary Infor mations 115 5 • Page Numbering per copy: Combined w ith 1 Sided/2 S ided in the Combine function If you combine this function with the Duplex ( Top to Top ) function and se- lect [P1, P2] or [1/n, 2/n], page numbers on the back are printed as follows: 1.
116 INDEX 1 sided → 2 si ded , 43 2 sided → 1 si ded , 43 2 sided → 2 si ded , 43 90 ° turn , 11 A Accessing us er tools copy/docum ent server featu res , 89 Adjusting copy image density , 21 A.
117 D Date stamp , 100 change pos ition , 65 change style , 65 font , 100 position , 101 position and original orien tation , 64 size , 10 0 stamp format , 100 superimp ose , 101 Deleting program , 75.
118 M Main po wer indi cator , 4 Manual ima ge density , 21 Manual pap er select , 24 Messag es , 77 Missin g image area , 9 Mixed siz e mode , 13 N Non-recomm ended orig inals f or Auto Document Feed.
119 Sort , 31 rotate sort , 31 shift sort , 32 Specifica tions , 103 Stack , 34 Stamp , 98 bac kgroun d number ing , 59 date stamp , 64 format , 99 , 100 langua ge , 98 page nu mbering , 65 position ,.
120 GB GB B082-66 00 MEMO Adon isC3_GB copyF_ FM1.bo ok Page 12 0 Thursd ay, No vember 28 , 2002 1:53 PM.
Ein wichtiger Punkt beim Kauf des Geräts Lanier LD 035 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lanier LD 035 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lanier LD 035 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lanier LD 035 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lanier LD 035 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lanier LD 035 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lanier LD 035 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lanier LD 035. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lanier LD 035 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
