Benutzeranleitung / Produktwartung KGS-612F des Produzenten KTI Networks
Zur Seite of 64
-1- K GS-612F Web Smart 6-Port Gigabit Ethernet Switch with Fiber Connectivity User , s M a nual DOC.071005.
-2- (C) 2007 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in a ny f orm or by a ny mea ns or used to make a ny directive work (such a s tra nsla- tion or tra nsf ormation) without permission from KTI Networks Inc.
-3- The information contained in this document is subject to change without prior notice. Copyright (C) . All Rights Reserved. TRADEMARKS Ethernet is a registered trademark of Xerox Corp. W ARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
-4- T a ble of Contents 1. Introduction .................................................................................................. 6 1.1 Features .................................................................................................
-5- 4. Web Ma n age ment ....................................................................................... 2 4 4.1 Start Browser Software a nd M a king Connection ..................................................... 24 4.2 Login to the Switch U nit .
-6- 1. Introduction The KGS-612F is a ma naged Gigabit Ethernet switch which is f eatured with the f ollowing switched ports: Three 10/100/1000Mbps Giga bit copper ports T wo combo ports - 10/.
-7- 1.1 Features Provides 6 10/100/1000Mbps RJ-45, one 1000M SFP a nd two 100M SFPs Provides in-ba nd web-ba sed ma nagement interfa ce All copper ports support auto-negoti ation a nd auto-MDI/MDI-X detection Provides full wire speed forwarding Supports 802.
-8- 1.3 LED Indicators LED Function POWER Power status LN K/1000M/ACT Network port 1000M link status (Port 1 - Port 6) LN K/100M/ACT Network port 100M link status (Port 1 - Port 6) LN K/10M/ACT Network port 10M link status (Port 1 - Port 6) 1.4 Specification s 10/100/1000 Copper Ports Compliance IEEE 802.
-9- Combo Por ts with 10/100/1000 RJ-45 a nd 100Mbps SFP Copper interfa ce Compli a nce IEEE 802.3 10Ba se-T , IEEE 802.3u 100Base-TX, IEEE 802.3u 1000Ba se-T Connectors Shielded RJ-45 ja cks Pin a ss.
-10- Softwar e M a nage ment Functions Interfa ces W e b browser M a nagement objects Syste m configuration - IP settings, Name, Pa ssword Port configuration control a nd status VLAN function settings Port Link Aggregation function settings Link Aggregation LACP settings RSTP settings 802.
-11- 2. In stallation 2.1 Un pa cking The product pa ckage contains: • The switch unit • One power a d a pter • One product CD-ROM 2.2 Safety Caution s T o reduce the risk of bodily injury , electrical shock, fire, a nd da mage to the product, observe the following precautions.
-12- 2.4 Mounting the Switch on a Din-rail Cha ssis The switch also ca n be mounted on a din-rail cha ssis. The steps are: 1. Screw the din-rail mounting bra cket on the bottom of the switch. 2. Mount the units on a din-rail cha ssis The din-rail mounting bra cket is optional.
-13- 2.6 Re set Button The reset button is used to perf orm a reset to the switch. It is not used in normal ca s es a nd ca n be used f or di agnostic purpose. If a ny network ha nging problem is suspected, it is useful to push the button to reset the switch without turning of f the power .
-14- 2.8 M a king Fiber Connection The SFP slot must be installed with a n SFP fiber tra nsceiver for making fiber connection. Y our switch may come with some SFP tra nsceivers pre-installed when it is shi pped. Installing SFP Fiber T ra nsceiver T o install a n SFP fiber tra nsceiver into SFP slot, the steps are: 1.
-15- 2.9 LED Indication L ED Function State Interpretation POWER Power status O N The power is supplied to the switch. OFF The power is not supplied to the switch. LNK/1000M/ACT Port link status O N A 1000M link is established. (No traffic) BLINK Port link is up and there is traffic.
-16- 3. Adva nced Function s T o help a better understa nding a bout the software ma nage ment interfa ces, this cha pter describes some advanced functions provided by the switch. 3.1 Abbreviation Ingress Port : Ingress port is the input port on which a packet is received.
-17- 3.2 QoS Function The switch provides a powerful Quality of Service (QoS) function to guide the packet forwarding in four priority classes. The versatile classification methods can meet most of the application needs.
-18- 3.2.1 Pa cket Priority Cla ssification Each received packet is examined and classified into one of four priority classes, Class 3, Class 2, Class 1 and Class 0 upon reception. The switch provides the following classification methods: 802.1p classification : use User Priority tag value in the received IEEE 802.
-19- 3.3 VLAN Function The switch supports port-ba sed VLAN, 802.1Q T ag VLAN a nd eight VLAN groups. 3.3.1 VLAN Operation The following figure illustrates the basic VLAN operation flow beginning from a packet received on an ingress port until it is transmitted from an egress port.
-20- 3.3.2.3 Drop Untag Per Port Setting Enable - All untagged packets and priority-tagged packets are dropped. A priority-tagged packet is treated as an untagged packet in this switch. Only VLAN-tagged packets are admitted. Disable - Disable Untagged packet filtering 3.
-21- 3.3.5 VLAN Group T a ble Configuration The switch provides a ta ble of eight VLAN groups to support up to eight VLANs at the sa me ti me. Each VLAN group is associated to one unique VLAN.
-22- 3.3.8 Egre ss T agging Rules Egress T agging rules are used to make cha nge to the pa cket bef ore it is stored into egress queue of a n egress port.
-23- An 802.1X authenticator: This is the port on the switch that ha s services to off er to a n end device, provided the device supplies the proper credenti als. An 802.1X supplica nt: This is the end device; f or exa mple, a PC that connects to a switch that is requesting to use the services (port) of the device.
-24- 4. W eb Ma n age ment The switch features a n http server which ca n serve the ma nagement requests coming from a ny web browser software over TCP/IP network. W eb Br owser Compatible web browser software with JA V A scri pt support M icrosoft Internet Explorer 4.
-25- 4.3 Main M a n age ment Menu Configuration System Switch information, system and IP related settings Ports Port link status, port operation mode configuration VLAN VLAN related configuration Aggr.
-26- 4.4 Syste m.
-27- Configuration De scri ption MAC Address The MAC a ddress fa ctory configured for the switch It can not be changed in any cases. S/W V ersion The firmware version currently running H/W V ersion Th.
-28- 4.4.1 M a n age ment VLAN M a nagement VLAN settings allow a dministrator to a ccess the switch a nd perform the switch ma nage- ment over a dedicated VLAN.
-29- 4.5 Ports Configuration Function Ena ble Jumbo Fra mes Select to ena ble jumbo frame support Port The port number Link Speed a nd duplex status with gr een ba ckgr ound - port is link on Down wit.
-30- 4.5.1 SFP DDM Status DDM (Digital Di agnostic Monitoring) information a nd status are provided in some SFP tra nsceivers. Part of the information are retrieved a nd listed as f ollows: Information Function Port Port number which ha s SFP slot (Port 4, Port 5, Port 6 come with SFP .
-31- 4.6 VLANs VLAN Configuration De scri ption VLAN Disable Select to disable VLAN function All ports are allowed to communicate with each others freely with no VLAN limitation.
-32- 4.6.1 Port-ba sed VLAN Mode Configuration Description Group 1, 2 Port-based VLAN group number Member ports Select member ports for the group [Apply] Click to apply the configuration change [Refresh] Click to refresh current configuration [Back] Click to go back to upper menu Operation in this mode: 1.
-33- 4.6.2 Port-ba sed VLAN ISP Mode Configuration Description Joint port Select a port as the joint port for all 5 port-based VLAN groups [Apply] Click to apply the configuration change [Refresh] Cli.
-34- 4.6.3 Adva nced VLAN Mode Configuration Description Ingress Default T ag Click to configure per port Ingress Default T ag settings Ingress Settings Click to configure per port ingress settings Eg.
-35- 4.6.3.1 Ingre ss Default T ag Configuration De scri ption Port Port number PVID Port VID, VID for Ingress Default T ag 1 ~ 4095 - decimal 12-bit VID value CFI CFI for Ingress Default T a g 0, 1 -.
-36- 4.6.3.2 Ingre ss Settings Configuration De scri ption Port Port number T ag A ware Check tag data for every rece ived pa cket T ag-aware - set to a ctivate T ag-ba sed mode T ag-ignore - set to u.
-37- Note: 1 . Priority-tagged pa cket (VID=0) is treated a s untagged pa cket in the switch. 2 . [T ag A war e] setting affects the index used for VLAN cla ssification (VLAN ta ble lookup).
-38- Configuration De scri ption Port Port number Insert T a g Activate tagging (Insert a tag to the pa cket) Enable - set to a ctivate tagging Disa ble - set to disa ble tagging function Untagging Sp.
-39- 4.6.3.4 VLAN Groups Configuration Description Group Group number V I D VID of the VLAN to which this group is associated 1 ~ 4095 - decimal 12-bit VID value Member Ports Select the admitted egres.
-40- 4.6.4 Importa nt Note s for VLAN Configuration Some considerations should be checked in configuring VLAN settings: 1 . Switch VLAN Mode selection It is suggested to evaluate your VLAN application first and plan your VLAN configuration carefully before applying it.
-41- 4.7 Aggregation Configuration Description Group T runk group number Port # Click to select the port a s me mber port of the trunk group [Apply] Click to apply the configuration change [Refresh] C.
-42- 4.8 LACP Configuration De scri ption Port Port number Protocol Ena bled Ena ble LACP support for the port Key V alue An integer value a ssigned to the port that determines which ports are aggregated into a n LACP link aggregate. Set sa me value to the ports in sa me LACP link aggregate.
-43- 4.9 RSTP Configuration De scri ption System Priority The lower the bridge priority is the higher priority it ha s. Usually , the bridge with the highest bridge priority is the root. V alue: 0 ~ 61440 Hello T ime Hello T i me is used to determine the periodic ti me to send normal BPDU from designated ports a mong bridges.
-44- Aggregations Enabled to support port trunking in STP . It mea ns a link aggregate is treated a s a physical port in RSTP/STP operation. Port Protocol Ena bled Port is ena bled to support RSTP/STP . Port Edge An Edge Port is a port connected to a device that knows nothing a bout STP or RSTP .
-45- Configuration De scri ption Mode Disa bled - disa ble 802.1X function Enabled - ena ble 802.1X function RADIUS IP IP a ddress of the Ra dius server RADIUS UDP Port The UDP port for authentication requests to the specified Ra dius server RADIUS Secret The encryption key f or use during authentication sessions with the Ra dius server .
-46- 4.10.1 802.1X Re-authentication Para meters Configuration De scri ption Reauthentication Ena bled Check to ena ble periodical re-authentication f or all ports Reauthentication Period The period o.
-47- 4.1 1 Mirroring Configuration De scri ption M irror Port The port is forwarded all pa ckets received on the mirrored ports M irror Source Select the ports which will be mirrored all received pa ckets to the mirror port.
-48- 4.12 Quality of Service QoS Configuration D e scri ption Port Port number 802.1p 802.1p priority cla ssification Enable - set to enable this classification to the port for priority-tagged and VLAN-tagged packets Disable - 802.
-49- 4.12.1 802.1p M a pping Configuration Description Port n Port number n tag m 3-bit User priority tag value m ( ra nge : 0 ~ 7 ) Priority cla ss M a pped priority cla ss for tag m on Port n Class .
-50- 4.12.2 DSCP Ma pping Configuration Description DSCP [0-63] Seven user-defined DSCP values which are configured with a priority class 0 ~ 63 - 6-bit DSCP value in deci mal Priority The priority cl.
-51- 4.12.3 QoS Service Policy Configuration Description Port Port number Policy Service policy for egress priority a mong four egress cla ss queues Strict priority - high class queue is served first .
-52- 4.13 Storm Control Configuration De scri ption Broa dcast Rate The rate li mit of the broa dcast pa ckets tra nsmitted on a port. Broa dcast Rate The rate limit of the Multica st pa ckets tra nsmitted on a port. Flooded Unica st Rate The rate li mit of the flooded unica st pa ckets tra nsmitted on a port.
-53- 4.14 Statistics Overview Statistics De scri ption Port Port number Tx Bytes T otal of bytes tra nsmitted on the port Tx Frames T otal of pa cket fra mes tra nsmitted on the port Rx Bytes T otal o.
-54- 4.15 Detailed Statistics Button De scri ption [Port #] Click to display the detailed statistics of Port #. [Clear] Click to reset all statistic counters [Refresh] Click to refresh the displayed s.
-55- 4.16 LACP Status Status De scri ption Port The port number Normal Display the ports not LACP ena bled. Group # The LACP group Status The LACP port status presented with color a nd a number < D.
-56- Status De scri ption Port The port number Protocol Active yes - the port is link up a nd in LACP operation no - the port is link down or not in LACP operation Partner Port Number The port number .
-57- 4.17 Ping Ping De scri ption T arget IP Addres s The target IP a ddress to which the ping comma nd issues Count The number of ping comma nds generated T i me Out (in secs) The ti me out f or a re.
-58- 4.18 Reboot Syste m This menu is used to reboot the switch unit remotely with current configuration. Starting this menu will make your current http connection lost. Y ou must rebuild the connection to perf orm a ny ma nagement operation to the unit.
-59- 5. SNMP Support SNMP version support Snmp v1, v2c ma nage ment M a naged Objects MIB-II system OBJECT IDENTIFIER ::= { mib-2 1 } interfa ces OBJECT IDENTIFIER ::= { mib-2 2 } i p OBJECT IDENTIFIE.
-60- Appendix. Fa ctory Def ault Settings System Configuration DHCP Ena bled Not select (disabled) Fallba ck IP Address 192.168.0.2 Fallba ck IP Subnet mask 255.
-61- Ingress Setting - T ag A ware T ag-ignor e f or all ports Ingress Setting - Keep T ag Enable for all ports Ingress Setting - Drop Untag Disable for all ports Ingress Setting - Drop T ag Disable f.
-62- Protocol Ena bled Not select (disabled) for all ports Key V alue auto for all ports RSTP System Configuration System Priority 32768 Hello T ime 2 M ax Age 20 Forward Delay 15 Force V ersion Norma.
-63- Quality of Service Configuration 802.1p Cla ssification Disable for all ports DSCP Cla ssification Disable for all ports Port Priority Cla ss 3 for all ports QoS 802.
-64- DSCP 5 / Priority 0, Cla ss 0 DSCP 6 / Priority 0, Cla ss 0 DSCP 7 / Priority 0, Cla ss 0 All others DSCP Cla ss 0 QoS Service Policy Port 1 Strict priority Port 2 Strict priority Port 3 Strict p.
Ein wichtiger Punkt beim Kauf des Geräts KTI Networks KGS-612F (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie KTI Networks KGS-612F noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für KTI Networks KGS-612F - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von KTI Networks KGS-612F reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über KTI Networks KGS-612F erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon KTI Networks KGS-612F besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von KTI Networks KGS-612F verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit KTI Networks KGS-612F. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei KTI Networks KGS-612F gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
