Benutzeranleitung / Produktwartung KAV-300IL des Produzenten Krell Industries
Zur Seite of 28
Instructions for Use Owner ’ s Reference THE LEADER IN AUDIO ENGINEERING KA V– 300iL Remote Control Integrated Amplifier.
This product is manufactured in the United States of America. Krell ® is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents. Krell Current Mode™ and Theater Throughput™ are trademarks of Krell Industries, Inc.
Krell KA V–300iL iii Contents Page INTRODUCTION 1 DEFINITION OF TERMS 2 UNP ACKING 4 PLACEMENT 5 AC Power Guidelines 5 Power Cord 5 FRONT P ANEL DESCRIPTION 7 BACK P ANEL DESCRIPTION 10 REMOTE CONTR.
iv Krell KA V–300iL Illustrations FIGURE 1 The KA V–300iL Front Panel 6 FIGURE 2 The KA V–300iL Back Panel 9 FIGURE 3 The KA V–300iL Remote Control 12 Page.
Krell KA V–300iL 1 Introduction Thank you for your purchase of the Krell KA V–300iL Remote Control Integrated Amplifier . This fully integrated amplifier and pre- amplifier has a fully balanced signal path from input to output and employs a wide bandwidth design with low negative feedback for sonic accuracy throughout the frequency spectrum.
Definition of T erms OPERA TION Following are the definitions of key terms used in your owner ’s ref- erence manual. Theater Throughput Theater Throughput is a Krell configuration option that allows.
Definition of T erms, continued Krell Current Mode A proprietary Krell circuit topology in which the audio gain stages of a component operate in the current rather than voltage domain. This unique technology provides the component with exceptional speed and a wide bandwidth.
4 Krell KA V–300iL Unpacking After opening the box and removing the top layer of foam, the KA V–300iL and the KA V–300iL accessory kit containing the follow- ing items will be visible: 1 AC powe.
Krell KA V–300iL 5 Placement Before you install the KA V–300iL into your system, review the fol- lowing guidelines to choose the location for the KA V–300iL. This will facilitate a clean, trouble-free installation. The KA V–300iL does not require any type of special rack or cabinet for installation.
Figure 1 The KAV-300iL Front Panel 2 7 1 4 11 6 9 10 8 3 5 Mode Indicators 8 Mute Button 9 Mute LED V olume Adjustment Functions 10 Level Up and Down Buttons 1 1 Front Panel Display Power 1 Power Butt.
Krell KA V – 300iL 7 The front panel of the KA V – 300iL accesses power on and off, analog input selections, volume control, and mute. The front panel display shows the volume and balance levels, and Theater Throughput status. 1 Power Button Use this button to switch the KA V – 300iL between the stand-by and the operational modes.
8 Krell KA V – 300iL Front Panel Description continued 8 Mute Button Use this button to interrupt the signal of the input you have select- ed. T o unmute, press the mute button again. 9 Mute LED The red mute LED illuminates when you press the mute button or mute key (28) on the remote control.
Figure 2 The KAV-300iL Back Panel 50/60 Hz 19 30 18 23 12 13 14 15 16 17 12 23 22 21 MADE IN USA FUSE AGC 8 LEFT OUTPUT IN IN RC–5 12VDC OUT OUTPUTS TAPE PREAMP LEFT TAPE S – 3 S – 2 S – 1 INP.
Back Panel Description See Figure 2 on page 9 10 Krell KA V – 300iL The KA V – 300iL back panel provides connections for all inputs and outputs, power on/off, and additional remote connections. 12 Left and Right Loudspeaker Outputs The KA V – 300iL is equipped with standard binding posts for each amplifier channel.
Back Panel Description, continued Krell KA V – 300iL 11 20 12 VDC In The KA V – 300iL is equipped with an input that receives 12 VDC (12 V trigger) power on/off signals from other Krell components and other devices that incorporate a 12 V trigger .
Figure 3 The KAV-300iL Remote Control 12 Krell KA V – 300iL 24 25 27 26 28 29 30 Power 24 Power Key 25 Pre Key Analog Functions 26 Analog Input Keys 27 T ape Key Output Control Functions 29 Mute Key 29 V ol (V olume) Keys 30 Bal (Balance) Keys Note Remote control keys listed above function with the KA V -300iL.
Remote Control Description See Figure 3 on page 12 Krell KA V – 300iL 13 The KA V -300iL remote control uses one CR2025 lithium battery , which is included with the shipment. T o open the battery compartment on the back of the remote control: 1. Place the remote face down on the table.
Remote Control Functions continued 14 Krell KA V – 300iL 26 Analog Input Keys Use these keys to select a balanced source (B-1) or single-ended sources (S-1, S-2, or S-3).
Krell KA V – 300iL 15 Krell recommends using balanced interconnect cables. Balanced interconnect cables not only can minimize sonic loss but are also immune to induced noise, especially with installations using long cables. Balanced connections have 6 dB more gain than single- ended connections.
16 Krell KA V – 300iL This section provides information about operating the KA V – 300iL. The KA V – 300iL provides basic input selection and volume control operation from the front panel. The remote control includes addi- tional preamplifier functions as well as CD transport and amplifier controls.
Krell KA V – 300iL 17 3. T o turn the amplifier off, press the power button (1) or power key (24). The red stand-by LED (3) illuminates. It is now safe to turn off the rest of the system.
18 Krell KA V – 300iL T o simplify the integration of an audio/video surround sound processor into your system, set any input on the KA V – 300iL (S-1, S-2, S-3, or B-1) to operate as a unity gain stage. Krell calls this configuration Theater Throughput.
Krell KA V – 300iL 19 The KA V – 300iL is equipped with a pair of single-ended preamplifi- er outputs (17). These outputs enable the KA V – 300iL to be used as a preamplifier when it is connected to a separate amplifier . The amplifier channel outputs are always active, even when the KA V–300iL is being used only as a preamplifier .
20 Krell KA V – 300iL AC grounding becomes critical when connecting high performance audio components. When you mix and match audio components, each with its own ground potential, a low frequency hum may occur in one or both loudspeakers. This sometimes occurs when introducing a new component into a system.
Krell KA V – 300iL 21 Q. Should I leave my KA V – 300iL on at all times? A. Krell recommends leaving the amplifier in the stand-by mode, ready to play music. If you are not going to play music for a long time, you may disconnect the amplifier from AC power supply .
22 Krell KA V – 300iL This Krell product has a limited warranty of five years for parts and labor on circuitry . Should this product fail to perform at any time during the warranty , Krell will repair it at no cost to the owner , except as set forth in this warranty .
Krell KA V – 300iL 23 Return Authorization Procedure If you believe there is a problem with your component, please con- tact your dealer , distributor , or the Krell factory to discuss the problem before you return the component for repair .
FREQUENCY RESPONSE 20 Hz-20 kHz +0 dB, -0.07 dB SIGNAL TO NOISE RA TIO “A” WEIGHTED 99 dB TOT AL HARMONIC DISTORTION (THD) 1 kHz <0.04% 20 kHz <0.25% GAIN 35.8 dB INPUT SENSITIVITY 0.644 V rms INPUT IMPEDANCE 47 kOhms OUTPUT IMPEDANCE 0.17 Ohms POWER CONSUMPTION Idle 20 W Max.
Ein wichtiger Punkt beim Kauf des Geräts Krell Industries KAV-300IL (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Krell Industries KAV-300IL noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Krell Industries KAV-300IL - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Krell Industries KAV-300IL reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Krell Industries KAV-300IL erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Krell Industries KAV-300IL besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Krell Industries KAV-300IL verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Krell Industries KAV-300IL. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Krell Industries KAV-300IL gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
