Benutzeranleitung / Produktwartung Five-Channel Power Amplifier KAV-1500 des Produzenten Krell Industries
Zur Seite of 28
Leader in Audio Engineering KAV-1500 Five-Channel Power Amplifier Instructions for Use Owner’s Reference.
KAV-1500 Five-Channel Power Amplifier Instructions for Use v 00.0 Krell Industries, Inc. 45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954 FAX 203-891-2028 E-MAIL krell@krellonline.com WEBSITE http://www, krellonline.com This product complies with the EMC directive (89/336/EEC) and the low-voltage directive (73/23/EEC).
Contents INTRODUCTION DEFINITION OF TERMS UNPACKING PLACEMENT AC Power Guidelines FRONT PANEL DESCRIPTION: KAV-1500 BACK PANEL DESCRIPTION: KAV-1500 CONNECTING THE KAV-1500 AMPLIFIER TO YOUR SYSTEM In.
Illustrations FIGURE 1 FIGURE 2 FIGURE 3 FIGURE 4 The KAV-1500 Front Panel The KAV-1500 Back Panel Reconfiguring the KAV-1500 for MAT Operation Reconfiguring the KAV-1500 for Bridged Operation Page 5 .
Introduction Thank you for your purchase of.the Krell KAV-1500 Five-Channel Power Amplifier. The KAV-1500 amplifier provides substantial five-channel output power that delivers realistic music reproduction at an exceptional value.
Definition of Terms, continued Single-ended A two-wire input or output circuit, Use care when using single-ended connections, in which the ground, connection is made last and broken first. Turn the system off prior to making or breaking single-ended connections.
Unpacking Open the shipping box, which contains: 1 amplifier unit (packed in foam end-caps) 4 ribbon connection cables Fuses 2 AGC- ~ (~-amp) speaker fuse 1 slow-blow (20 amp for 100/120V or 12 amp fo.
Placement Before you integrate the KAV-1500 into your system, review the following guidelines to choose the location for the component. This will facilitate a clean, trouble-free installation.
FIGURE 1 THE KAV-1500 FRONT PANEL KAV- 1500 1 Power Button 2 Power LED.
Front Panel Description: KAV-1500 See Figure 1 on page 5 1 Power Button Use this button to switch the KAV-1500 power from off to the operational mode and also to switch the 12 VDC output (12 V trigger) on and off.
FIGURE 2 THE KAV-1500 BACK PANEL 3 8 AGC-12 20 23 19 14 9 INPUT---~ / AGC-12 5 10 / r-~ ~ INPUT ~ / 6 11 7 12 KAV-1500 Power Amplifier 21 22 OUTPUT (LIEF’I" SURROUNO) 19 15 1916 1917 AGC42 OUTP.
Back Panel Description: KAV-1500 See Figure 2 on page 7 The KAV-1500 back panel provides connections for all inputs and outputs, remote connection input and output links, and AC power supply.
Back Panel Description, continued Fuses 19 AGC-12 Fuses The AGC 12 Volt loudspeaker fuses protect the KAV-1500 against short circuits in loudspeaker output.
Connecting the KAV-1500 Amplifier to Your System INPUT AND OUTPUT CONNECTIONS Follow these steps to connect the KAV-1500 amplifier to your system. 1. Make sure all power sources and components are off before connecting inputs and outputs= 2. Neatly organize the wiring between the amplifier and all system components.
The KAV-1500 amplifier is shipped with shorting pins in the XLR inputs. These pins should remain in the XLR inputs if the amplifier is operating in the single-ended mode. When the shorting pin is insert,ed, pins 1 (lower left) and 3 (top) are shorted together.
Optional System Configurations The KAV-1500 can be reconfigured for either Multi Amp Throughput (MAT) or bridged operation. IMPORTANT Removing the cover to reconfigure for MAT or for bridged operation is the ONLY instance you are authorized to remove the cover of ANY Krell component without voiding your Warranty.
FIGURE 3 RECONFIGURING THE KAV-1500 FOR MAT OPERATI()N PC Input Board showing MAT jumper configuration Left To Slow Channel Start J1M 8oard For J For ~,~eff.
Reconfiguring the KAV-1500 for MAT See Figure 3 on page 13 Tools needed: T-15 Torx wrench and four ribbon connection cables 1. Turn the KAV-1500 off by pressing the power button (1) on the front panel. The blue power LED (2) extinguishes. Unplug the AC power cord (23) from AC power.
FIGURE 4 RECONFIGURING THE KAV-1500 FOR BRIDGED OPERATI( )N Do not attempt to bridge channels in any way other than specified below. Opt I Opt~ Opti°n 2 Right For Center For For Channel Bridging Chan.
BRIDGED OPERATION The KAV-1500 can be reconfigured to bridge four of its amplifier channels to operate as two combined amplifier channels. The bridged amplifier channels each deliver 1,100 Watts into an 8 Ohm load. The unbridged amplifier channel can be connected to a separate loudspeaker.
Connecting the Bridged KAV-1500 See Figure 2 on page 7 Connect the bridged channels as follows: Option 1 1. When the left and right channels are bridged, connect the output cable from the output device to the appropriate balanced (7) or single-ended (12) left channel input.
Multi Power Mode Connection Multi power mode is one possible connection scenario using the KAV-1500’s Multi Amp Throughput (MAT) feature. With Multi Power Mode, you can use the KAV-1500 reconfig- ured for MAT to independently power multiple pairs of stereo loudspeakers, to extend the listening environment throughout your home.
Amplifier Operation ON/OFF AND OPERATION When powering up your system, turn amplifiers on last. When powering down your system, turn amplifiers off first. The procedures for amplifier operation follow. 1. Press the power button (1) on the KAV-1500 front panel.
Questions and Answers Q. Should I leave the KAV-1500 amplifier on at all times? A. No. The amplifier does not have a stand-by mode. Leaving it on at all times would result in considerable heat output and power consumption.
Warranty This Krell product has a limited warranty =of five years for parts and labor on circuitry. Should this product fail to per- form at any time dudng the warranty, Krell will repair it at no cost to the owner, except as set forth in this warranty.
Return Authorization Procedure If you believe there is a problem with your component, please contact your dealer, dis- tributor, or the Krell factory to discuss the problem before you return the component for repair.
Specifications KAV-1500 Five-Channel Amplifier FREQUENCY RESPONSE SIGNAL TO NOISE RATIO "A" WEIGHTED TOTAL HARMONIC DISTORTION (THD) GAIN INPUT IMPEDANCE INPUT SENSITIVITY OUTPUT VOLTAGE OUTPUT POWER, EACH CHANNEL DRIVEN BRIDGED POWER CONSUMPTION INPUTS OUTPUTS DIMENSIONS WEIGHT 20 Hz to 20 kHz +0 dB, -0.
Krell Industries, Inc. 45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954 FAX 203-891-2028 E-MAIL krell@ krellonline.com WEBSITE http://www, krellonline.
Ein wichtiger Punkt beim Kauf des Geräts Krell Industries Five-Channel Power Amplifier KAV-1500 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Krell Industries Five-Channel Power Amplifier KAV-1500 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Krell Industries Five-Channel Power Amplifier KAV-1500 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Krell Industries Five-Channel Power Amplifier KAV-1500 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Krell Industries Five-Channel Power Amplifier KAV-1500 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Krell Industries Five-Channel Power Amplifier KAV-1500 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Krell Industries Five-Channel Power Amplifier KAV-1500 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Krell Industries Five-Channel Power Amplifier KAV-1500. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Krell Industries Five-Channel Power Amplifier KAV-1500 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
