Benutzeranleitung / Produktwartung KS4192 des Produzenten Koss
Zur Seite of 40
.
E 1 GB SAFETY T o ensure proper use of this product, please read this owner manual carefully and retain for future reference. Should the unit require maintenance, con- tact an authorized service location.
E 2 • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water . • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions.
E 3 GB Contents Introduction S a f e t y ................................................................................................................... E 1 Important Safety Instructions ............................................................
E 4 Player Zones Anti-copy Disc Protection Installation DVD Discs For the purpose of distribution of DVD Discs, the world has been separated into 6 zones. The zone your unit is intended for is indicated on the Zone Label. This should be the same as the label on discs available in your region.
E 5 GB Remote Control 20. MODE selects surround modes or soundfield modes. 21. TONE selects EQ modes. 22. 0 - 9 (Numeric keys) used for direct selections of title, chapter , track, tuner channel and time input. 23. mutes and unmutes sound output. 24. opens or closes the disc tray .
E 6 Front Panel 1. Standby Indicator 2. Standby On / Off 3. Opens or closes the disc loading tray 4. DVD Selects DVD/VCD/CD as the input source 5. TUNER Selects tuner as the input source. Also switches between AM and FM bands. 6. Selects A V1 as the input source 7.
E 7 GB Rear Panel 1 2 IMPORT ANT! Connect the AC cord only after the speakers, antenna and all optional equipment have been connected. Never make or change any connections with the power switched on. The rating plate is located at the rear panel of the system.
E 8 Rear Panel 7. Digital Coaxial Input For connecting external equipment that has a digital coaxial output jack. 8. Digital Coaxial Output F or connecting external equipment that has digital audio input jack, such as a CD Recorder . 9. S - Video Output F or connecting the S- VIDEO IN jack on the TV using an optional S- Video cable.
E 9 GB Setup and Installation The following setup and installation diagrams show the different video and audio connections to TV , VC R or CD Recorder . Important Make sure the AC V oltage matches your local voltage. Connect the AC cord only after the speakers, antennas, and all optional equipment have been connected.
E 10 (3) Speaker connections Before Connecting This DVD Receiver is designed to reproduce optimum sound quality when the supplied speakers are used. If you wish to connect other speakers to the system instead of the supplied speakers, they should be 4 ohms impedance with a minimum power handling of 95 watts each.
E 11 GB Connection of all speakers are the same. Notes • Do not remove excessive amount of insulation on the wire cords, to avoid the stripped portion from touching each other . The optimal length for the stripped part should be around 1/3 inch (or 1cm).
E 12 Placement of speakers play an important role in the reproduction of surround sound. P articular attention should be taken when designing the speaker layout.
E 13 GB Proper setup of the unit will let you enjoy better sound and picture quality as well as many useful features. The selections are the preferred options that will be chosen, provided they are available on the disc. NOTE: If the disc loaded does not have the preferred option then the disc’s own preference should be used.
E 14 PL A Y PL A Y MODE LOCK Play Mode No menu available without disc loaded. (See under “When DVD is stopped” or “When CD is stopped”) Play Mode Lock Player Create your password here using the numeric keys. The player is delivered without a password.
E 15 GB PA L / N T S C Press OK to select between P AL or NTSC output to match your TV or other equipment. W arning: Y ou MUST have a P AL system TV if you choose to select the P AL setting.
E 16 Progressive Scan By displaying all the lines of a picture simultaneous (instead of displaying odd and even lines alternatively such as a conventional TV), Progressive Scan greatly enhances picture resolution while minimizing distortion and flickering.
E 17 GB Front Speaker Size - Small Center Speaker Size - None, Small Subwoofer Speak er - None or Y es Surround Speaker Size - None, Small Back Surround Speaker size - None, Small Note : Absent speakers are shown with dotted outline.
E 18 Panorama Extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with side-wall imaging. Center Width Control With Pro Logic decoding, dominant center signals can come only from the center speaker .
E 19 GB Selecting the source Press one of the input selector buttons (on the front panel or remote control) to select the below input source: - A V SEL (press A V1/ A V2 or A V SEL) - TUNER - DVD/CD/V.
E 20 Display Indicators Note: For proper surround sound make sure you have followed the setup and installation procedure fully . Surround Sound & Sound Effects - Stage - H al l - Disco - L i v e Selecting Surround Output Modes The number of output modes varies according to the system setup and the input sources.
E 21 GB Dolby Digital Surround The Dolby Digital Surround system requires connections of all 5 speak ers (front left, center , front right, surround right, surround left) for the correct surround sound reproduction.
E 22 Automatic tuning 1. Press TUNER to select tuner mode. 2. After two seconds the display will change to show the current band and frequency . 3. If necessar y , press TUNER again to switch between AM and FM band. 4. Press and hold or for more than one second to activate auto tuning mode.
E 23 GB Clock & Timer ON/OFF Timer Setting the ON/OFF Timer 1 . In A V1 / A V2 or TUNER, press MENU button. 2 . Press until Timer Setup Mode is selected. 3 . Press OK, then use to choose On Time or Off Time. 4. Press OK to enter Set Time mode. Set Time (refer to “Setting the Clock”) and press OK.
E 24 5 . Press to set the function ON or OFF . 6. Press OK for confirmation. Clock / Sleep Timer Displaying the Current Time When in DVD/A V1/A V2/TUNER modes, press SLEEP on the remote control to select SHOW CLK to display the current time. The clock will stay displayed.
E 25 GB Playing DVD Discs 1 . T o play DVD disc, press to open the disc tray . 2. Load disc onto the tray with the label side facing upward. 3 . Press to close the tray . The disc will start playing automatically . There may be a short delay before playing while the player reads the menu from the disc.
E 26 When DVD Disc is stopped The following special menus will display when playing is stopped. For other menus, please refer to “Function Setup”. T o select options, use Active Navigation keys (see under “F unction Setup - Basic Operations” for detailed operations).
E 27 GB Press OK to create or edit program. Create Program - Example shows how to add Title 1, and Chapter 1 in Title 2 to the program then save and start playing.
E 28 1 . T o play music CDs, press to open the disc tray . 2. Load disc on the tray with label side facing upward. 3. Press to close the tray . The disc will start playing automatically . There may be a short delay before playing while the player reads menu from the disc.
E 29 GB Display the current playing time of the track. Press to select track you want to play . Press repeatedly to select among “Standard”, “Program”, “Random”, “Disc Repeat”, “T rack Repeat ”, “Repeat A-B”, and “Intro Scan”.
E 30 When CD Disc is stopped The following special menus will display when playing is stopped. For other menus, please refer to “Function Setup”. T o select options, use Active Navigation keys (see under “F unction Setup - Basic Operations” for detailed operations).
E 31 GB Edit Program - Example shows how to delete the last selection in the program. Press “Clear ” to delete the last selection Press to select “Done” or press to save the “Program List”.
E 32 Playing VCDs 1 . T o play VCD disc, press to open the disc tray . 2. Load disc onto the tray with label side facing upward. 3 . Press to close the tray . The disc will start playing automatically . There may be a short delay before playing while the player reads the menu from the disc.
E 33 GB Playing MP3 / WMA / JPEG Disc 1. T o play MP3/WMA/JPEG disc, press to open the disc tray . 2. Load disc onto the tray with label side facing upward.
E 34 MP3 files along with JPEG files A root menu exist, press More items available in menu, press More items available in menu, press Selections and playback logic MP3 / WMA files only: The player begins playing all the files in the currently selected folder , and then follow by all the files in the subfolders contained within its parent folder .
E 35 GB Stop and Resume Stop Press once to Resume Stop. In this mode playing can be resumed from the stop point by pressing . Press twice to stop playing completely and press will start playing from the beginning. Quick keys (ROT A TE, MENU, ZOOM) Press corresponding keys to go into respective disc menu.
E 36 Play Mode Standard Press OK to set unit playing tracks in default order . Random Press OK to set unit playing tracks in random order . Program Press OK to create or edit program. Create Program - Example shows how to add F older 1 and T rack 1 in Folder 2 to the program list then save and start playing .
E 37 GB Edit Program -Example shows how to delete the last selection from the program list Press “Clear ” to delete the last selection Press to select “Done” to save the “Program List”.
E 38 While advances have been made to ensure that your disc player is compatible with the largest number of discs possible, however it cannot be guaranteed that you will be able to play discs which might not be compliant with audio CD standards.
E 39 GB PROBLEMS If it appears that your DVD- Video player is faulty , first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself; as this will invalidate the warranty .
Ein wichtiger Punkt beim Kauf des Geräts Koss KS4192 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Koss KS4192 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Koss KS4192 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Koss KS4192 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Koss KS4192 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Koss KS4192 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Koss KS4192 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Koss KS4192. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Koss KS4192 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
