Benutzeranleitung / Produktwartung SR1750 HE des Produzenten AATA
Zur Seite of 28
Manual Stair Robot SR1750 HE AATA INTERNATIONAL B.V. Manual Stair Robot SR1750 HE.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. Stairrobot Type number : SR 1750 HE Serial number : Year of construction : 2001 Owner : Manufacturer : AATA International b.v Willem 2 straat 1e 6021 EA Budel The Netherlands Tel : 0031-(0) 495 518214 Fax : 0031-(0) 495 518515 e-mail: aata@aata.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. Preface AATA International is an innovative and dynamic al company, specialised in stair climbing equipment.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. Table of contents Preface………………………………………… ……………………………………… ………… 3 Table of contents .
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. Survey of standard We declare that the construction of the stairrobot SR1750HE is according to the provisions of EC-Directives 89/392/EWG.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 1. Technical data SR 1750 HE Description Value Units Speed 3 Metres p/minute Lifting capacity max. 1000 Kg. Maximum angle Max. 45 º Degrees Weight 175 Kg. Weight including standard accessories 232 Kg.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 2 Description main components stairrobot SR 1750 HE 2.1. Drive • Single phase low-noise AC motor with thermal cut-out 2.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 2. 4. Controls • Remote control (2 metres cable attached) manually operated 4-button switch Press a button to drive 2.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 2. 6. Descent adjuster • The descent adjuster is located at the rear end of the machine and is used to adjust the descent of the lifting platform depending on the weight of the load.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 3.2. Turntable • The turntable is a circular piece of equipment Ø 610 mm, h. 40 mm. constructed out-of two disks of block board with hard-plastic surface to eliminate friction.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 3.4. Dolly • The dolly is constructed of square steel fittings with four heavy-duty swivel wheels for easy movements. An extendable frame can be pulled out to increase stability while driving the StairRobot on the dolly.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 4. Safety 4.1. General safety precaution • • • • • It is not permitted to make alterations to the machine. Everybody who is working with the machine has to be acquainted with the safety rules and has to act upon them.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. • • • • • • • • • • • To avoid misuse by unauthorised perso ns, don’t leave the machine unattended. Within the path of the machine there may be no obstructions.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 5 OPERATORS PROCEDURE 5.1. Pre-use inspection To ensure proper working and safe operation of the SR 1750 HE StairRobot: • C.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 5.2. Loading 5.2.1 The correct position of the load • If the load is not placed in the correct position on the lifting platform, the Stair robot can get instable during the process of climbing or descending a staircase.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. • The centre of gravity of the load should be within the positive area between the tracks. 5.2.2. Loading procedure • Start the procedure by securing the area for loading. Move the dolly with the stair robot into the desired position for loading.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 5.3. Ascending Load level • Ideal load level is obtained by adjusting the platform to the gradient of the stairs or dolly • The objective is to maintain a horizontal level of the platform during operation.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. • The stair robot can be stopped at any stage by just releasing the buttons • When arriving on top of the stairway; stop the stairrobot on the stairs and place the dolly in position at the top of the stairs in front of the stairrobot .
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 5.5. Unloading • Start the procedure by securing the area for unloading. Move the dolly with the stair robot into the desired position for unloading.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 6 Trouble shooting chart The stairrobot SR 1750 HE is designed and built to function for several years with little maintenance. In case a problem occurs please make the following checks.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. Symptom Possible course Solution • Oil leaks from hydraulic ram • Ram packing worn • Plunger bent • Replace o-ring an.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 7 Track replacement • Loosen both bolts a1 and a2 • Turn bolts b1 and b2 counter clockwise until the axle is at point d • Remove track at point C • To install the new track, reverse the above procedure Drawing (1.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. • Proper track tolerance at point F is +/- 10 mm (pulled by hand) drawing (3.) • Make sure that the distances A1 ….A4 are equal on both sides of the Stairrobot (drawing 4) Drawing (3.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 8 Electrical system Page 24 of 28.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 9 Hydraulic system Page 25 of 28.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 10. Parts Page 26 of 28.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 10.1. Parts list Art.nr.: Article 175.001A Main motor 175.001B Gearbox 175.002 Hydro-motor 175.003 Hydro-pump 175.003B Oil-seal hydro pump 175.007 4-button swit ch unit 175.008 Magneto swit ch 175.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 11. CD-Rom video Content: • Stair robot general promotion video (mpeg1) • Instruction video SR 1750 HE (mpeg1) • Instru.
Ein wichtiger Punkt beim Kauf des Geräts AATA SR1750 HE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AATA SR1750 HE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AATA SR1750 HE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AATA SR1750 HE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AATA SR1750 HE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AATA SR1750 HE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AATA SR1750 HE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AATA SR1750 HE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AATA SR1750 HE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
