Benutzeranleitung / Produktwartung Di3010 des Produzenten Konica Minolta
Zur Seite of 334
Advanced Information Di2510/Di3010/Di3510 www .konicaminoltaeurope.com Konica Minolta Business Solutions Europe GmbH Minoltaring 11 D-30855 Langenhagen Phone +49 (0)5 11 74 04-0 Fax +49 (0)5 11 74 10 50 Printed in Germany *9961251000* *9961251000* Copyright 2004 KONICA MINOL T A BUSINESS TECHNOLOGIES, INC.
..
Di2510/Di3010/Di35 10 Contents 1 Introduction 1.1 We Want You to Be a Satisfied Customer .............. .............. ...... 1-1 1.2 Explanation o f Manual Convention s .... .............. .............. ........... 1-2 1.3 Explanation o f Basic Concepts an d Symbols .
Di2510/Di3010/Di3510 2.6 Installation Precauti ons ...... ................. .............. .............. .......... 2-10 Installation Site ............ .............. .............. .............. ................. .. 2-10 Power Source .. ...........
Di2510/Di3010/Di35 10 When the copier is turned off ............ .............. ................. ......... 4-13 Auto Panel Reset..................... ...... ...... .............. ...................... . 4-14 Energy Save Mode .................. .....
Di2510/Di3010/Di3510 6.5 “Edge/Frame Erase” Functio n ... .............. .............. .............. ..... 6-10 Erasing Sections of Copies .......... .............. .............. .............. .. 6-10 To make settings for th e “Edge/Frame Erase” function .
Di2510/Di3010/Di35 10 To set the “LCD Back-light Off” f unction ....................... ............ 7-17 To set the “Auto Panel Reset” function .............. .............. ......... 7-18 To set the “Plug-In Counter, ID ke y Reset” function .
Di2510/Di3010/Di3510 8.3 Administrator Settings ................ ....................... .............. ........... . 8-6 Changing the administrator access code .................... ............... 8 -6 To set the administrat or access code ..........
Di2510/Di3010/Di35 10 9.6 Loading Paper .............. .............. .............. .............. ................. ...... 9-7 Loading Paper Into the 1st/2nd/3rd/4 th Paper Drawer ............... 9-8 Loading Paper Into the Large Capaci ty Cabinet ..
Di2510/Di3010/Di3510 11 Specifying Copy Settings 11.1 Specifyi ng Finishin g Settings ..................... .............. ........... ..... 11-1 Available Finishing Settings ............ ......................... .............. .. 11-1 Notes on Using the “Sort” and “Gro up” Settings .
Di2510/Di3010/Di35 10 12.3 When the Message “Stapler empty. ” Appears .......... ............... 12-5 To replace the staple cartridge for finisher ........ .............. ......... 12-5 To replace the staple cartrid ge for the saddle kit .........
Di2510/Di3010/Di3510 14.2 Care of the Cop ier . ................. .............. .............. .............. .......... 14-9 Cleaning ........ ................. .............. .............. .............. .............. .. 14-9 Housing cover ......
Introduction 1 Di2510/Di3010/Di35 10 1-1 1 Introduction 1.1 We Want You to Be a Satisfied Customer Thank you for choosin g a Konica Minolta C opier System. To ensure the best performance and effective use of your copier, this manual will provide info rmation on the following topics: G Getting to Know Your Copier G Initial Steps .
1 Introduction 1-2 Di2510/Di3010/Di 3510 1.2 Explanation of Manual Conventions The marks and text formats used in this manual are described below. WARNING Failure to observe instructio ns highlighted in this man ner may result in fatal or critical inju ries.
Introduction 1 Di2510/Di3010/Di35 10 1-3 1.3 Explanation of Basic Concepts and Symbols The use of words and symbols in this manual are explained belo w.
1 Introduction 1-4 Di2510/Di3010/Di 3510 Paper Orientation Lengthw ise ( ) If the width (Y) of the paper is shorter than the length (X), the paper has a vertical or portrait orientation, indicated by either “L” or .
Introduction 1 Di2510/Di3010/Di35 10 1-5 Display Icons Plain paper Thick paper Overhead projector tran sparencies Envelope Paper Supply Icons The icons shown below may appear, indicating that no more paper remains.
1 Introduction 1-6 Di2510/Di3010/Di 3510 1.4 Energy Star® As an ENERGY STAR ® Partner, we have determined that this machine meets the ENERGY STAR ® Guidelines for energy efficiency.
Introduction 1 Di2510/Di3010/Di35 10 1-7 1.5 Components and Their Functions 2 1 3 4 6 5 8 7 No. Part Name Description 1 Duplexing Document Feeder AFR-19 (optional) Automatically f eeds one document sh.
1 Introduction 1-8 Di2510/Di3010/Di 3510 11 10 9 12 13 No. Part Name Description 9 Paper Feed Cabinet PF-124 (optional) Equipped with a paper drawer that can supply 500 sheets of paper, for upper pap er feed unit only. Referred to as the “paper feed cabin et” throughout the manual.
Introduction 1 Di2510/Di3010/Di35 10 1-9 * The internal options are not shown . 14 Punch Kit PK-6 (optional)* If this opt ion is attached to t he finisher, hole-pun ching is possible.
1 Introduction 1-10 Di2510/Di3010/Di 3510 How to use the Job Separator (JS-203)? Allows printed pages to be separated Pull the lever when taking out the paper.
Introduction 1 Di2510/Di3010/Di35 10 1-11 1.6 Part Names an d Their Functions Copier 9 8 6 3 1 2 4 10 5 11 7 No. Part Name Description 1 Right-side doo r Opened when cle aring paper misfeeds. 2 Right-side door release lever Used to open the right-side door.
1 Introduction 1-12 Di2510/Di3010/Di 3510 * The internal unit is not shown. 20 19 18 17 12 13 16 15 No. Part Name Description 12 Document pad Presses down on the document positioned on th e original glass. 13 Original glass When manually feedi ng the do cument, place it on the glass so the document can be scanned.
Introduction 1 Di2510/Di3010/Di35 10 1-13 21 22 23 No. Part Name Description 21 Duplexing Document Feeder connector Used for connecting the duple xing document feeder hookup cord. 22 Power switch Used to turn the copier on and off, se e page 4-12 23 Power cord socket Used for connecting the printer’ s power cord.
1 Introduction 1-14 Di2510/Di3010/Di 3510 Options Duplexing Document Fee der Paper Feed Cabinet (PF-124/PF-210 )* * PF-210: Equipped with a paper drawer that can supply 500 sheets of pap er, for upper paper feed un it only. 2 5 1 6 8 9 10 11 13 3 4 12 7 No.
Introduction 1 Di2510/Di3010/Di35 10 1-15 Built in Finisher (FN-117) Mail Bin Kit (MK-1) Precautions for using the finisher, saddle kit and mail bin kit G Do not place objects on top of the saddle kit or mail bin kit. G Do not place objects under the paper output trays of the finisher.
1 Introduction 1-16 Di2510/Di3010/Di 3510 Large Capacity Cabinet (PF-122) Additional Bin Kit (AK-1) Saddle Kit (SK-1) 15 18 14 16 17 19 No. Part Name Description 14 3rd paper dr awer (LCC) Holds up to 2,50 0 sheets of paper . 15 Lower-right door Opened when clearing paper misfe eds.
Safety Information 2 Di2510/Di3010/Di35 10 2-1 2 Safety Information This section contains detailed instructions on the operation and maintenance of this machine. To achiev e o ptimum utility of this device, all operators should carefully read an d follow the instructions in th is manual.
2 Safety Information 2-2 Di2510/Di3010/Di 3510 WARNING • Do not modify this product, as a fire , electrical shock, or brea kdown could result. If the product employs a laser, the laser beam source could cause blindness. • Do not attempt to remove the covers and panels which have been fixed to the product.
Safety Information 2 Di2510/Di3010/Di35 10 2-3 CAUTION Connect the power cord to an electrical outle t that is equipped with a grounding terminal. • Do not use flammable sprays, liquids, or gases near t his product, as a fire could result. • Do not leave a toner u nit or drum unit in a place wi thin easy rea ch of children.
2 Safety Information 2-4 Di2510/Di3010/Di 3510 2.3 Precautions for Routine Use • Do not store toner unit s, PC drum units, and other supplie s and consumables in a place subject to dire ct sunlight and high temperature and humidity, as poor image quality and malf unction could result.
Safety Information 2 Di2510/Di3010/Di35 10 2-5 2.4 User Instructions CE Marking (Decl aration of Confor mity) This product complies wi th the followin g EU directives: 89/336/EEC, 73/23/EEC, 93/68/EEC , and 199 9/5/EC directives. This declaration is valid for th e area of the Europea n Union.
2 Safety Information 2-6 Di2510/Di3010/Di 3510 2.5 Laser Safety This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided the machine is operated according to the in structions in this man ual.
Safety Information 2 Di2510/Di3010/Di35 10 2-7 CDRH Regulation This machine is certified as a Cla ss 1 Laser product under Rad iation Performance Standard according to t he Food, Drug an d Cosmetic Act of 1990.
2 Safety Information 2-8 Di2510/Di3010/Di 3510 For Finland, Sweden Users Tämä on puolijohdelaser. Laserdi odin sunrin teho on 5mW ja aallonpitu us on 770-795 nm. Det här är en halvledarlaser. Den maxi mala effekten för laserdioden är 5mW och våglängden är 770-795 nm.
Safety Information 2 Di2510/Di3010/Di35 10 2-9 Laser Safet y Label A laser safety label is attached to the outside of the mach ine as shown below. Ozone Release CAUTION Locate the Ma chine in a Well Ventilated Room § A negligible amount o f ozone is gene rated during normal operation of this machine.
2 Safety Information 2-10 Di2510/Di3010/Di 3510 2.6 Installation Precautions Installation Site To ensure utmost safety and preven t possible malfun ctions, install the copier in a location that meets the follo wing requirements. - A location away from curtains, etc.
Safety Information 2 Di2510/Di3010/Di35 10 2-11 Space Requirements To ensure easy copier operation, su pply replac ement, and maintenance, adhere to the recommended space requireme nts detailed belo w. Note Be sure to allow a clearance of 100 mm (4 in.
2 Safety Information 2-12 Di2510/Di3010/Di 3510 2.7 Operation Precautions Operating environment The environmental requirements for co rrect operati on of t he copier are as follows.
Safety Information 2 Di2510/Di3010/Di35 10 2-13 CAUTION The area around the fusing unit is extremely hot. § Be careful not to touch any parts around the fusing unit, other than those indicated in th is manual, in order to reduce the risk of burns. Be especially careful not to touch parts marked with warni ng labels, and their surrounding areas.
2 Safety Information 2-14 Di2510/Di3010/Di 3510 Transpor ting the copier If you need to transport the copier over a long distan ce, consult your technical representative . Care of copier supplie s Use the following precautions whe n handling the copier supplies (toner cartridge, paper, etc.
Safety Information 2 Di2510/Di3010/Di35 10 2-15 2.8 Legal Restrictions on Copyin g Certain type s of documents must never be copied with the pu rpose or intent to pass copies of such documents off as the originals. The following is not a complete list, but is me ant to be used as a guide to responsible copying.
2 Safety Information 2-16 Di2510/Di3010/Di 3510.
Available Features 3 Di2510/Di3010/Di35 10 3-1 3 Available Features 3.1 Useful Operations Installing the optiona l accessories expa nds the fun ctionality of th is copier. Copying a Book o r Magazine The individual pages of a book or magazine can be duplicated onto double-sided copies (one pa ge per side) in the original page order.
3 Available Features 3-2 Di2510/Di3010/Di 3510 3 For book-binding, touch [Standard Book] or [RightBound], and then touch [Separation]. Next, touch [Enter]. 4 Touch [Double-Sided], and then touch [Page Order]. 5 Touch [Book Order], and then touch [Enter].
Available Features 3 Di2510/Di3010/Di35 10 3-3 7 After the message shown at the right appears, turn the page of the book or magazine , re-position the document on the original glass, and then press the [Start] key. 8 Repeat step 7, and when the last page has been scanned, touch [Finish].
3 Available Features 3-4 Di2510/Di3010/Di 3510 Copying to Form a Bo oklet A document can be copied like a book so the pages can easily be put together to form a booklet. Note In order to perform the follo wing procedure, the optional duplexi ng document feeder must be installed .
Available Features 3 Di2510/Di3010/Di35 10 3-5 3 Touch [Booklet Creat ion], and then touch [Enter]. 4 Press the [Start] key. 5 After all copies are printed, fold the pages in half to form a booklet. Tip If the optional sad dle kit is installed, creasing or foldi ng can be set.
3 Available Features 3-6 Di2510/Di3010/Di 3510 Automatically Stapling Pages While Copying Each set of copies can easily be stapled together. Note In order to perform the follo wing procedure, the optional duplexi ng document feeder, finisher must be installed.
Available Features 3 Di2510/Di3010/Di35 10 3-7 3 Touch [Sort]. 4 Touch [2-Point Staple]. 5 Press the [Start] key..
3 Available Features 3-8 Di2510/Di3010/Di 3510 Printing Multiple Copies of Tickets Tickets for a concert or some other event can easily be made. As an example, the procedure for reduci ng a 210 mm × 74 mm document by 50% and copying it onto thick A4-size paper is described below.
Available Features 3 Di2510/Di3010/Di35 10 3-9 2 Open the multiple bypass tray and load it with paper. H A maximum of 50 sheets of thick paper can be loaded. 3 Touch [Paper]. 4 Touch the button for the multiple bypass tray, and then touch [Mode Change].
3 Available Features 3-10 Di2510/Di3010/Di 3510 6 Touch [Zoom]. 7 Touch [× 0.5]. 8 Touch [Auxiliary], and then touch [Image Repeat]. 9 Touch [Size Input].
Available Features 3 Di2510/Di3010/Di35 10 3-11 10 Touch [Custom Size]. 11 Touch [X]. Then, using the 10-Key Pad, type in the length of side X for the document. H For this example, set the length of side X to “210”. 12 Touch [Y]. Then, using the 10-Key Pad, type in the length of side Y for the document.
3 Available Features 3-12 Di2510/Di3010/Di 3510 Copying While Erasing an Area Around the Document When copying documents with unwanted marking s, headers or punch holes, the pages can be prin ted with a frame or one side of the d ocument erased.
Available Features 3 Di2510/Di3010/Di35 10 3-13 2 Touch [Auxiliary], and then touch [Edge/Frame Erase]. 3 Select the desired position of the erased area. (Example: Erasing a frame) 4 Touch the big arrow keys to specify the width of the erased area. 5 Touch [Enter].
3 Available Features 3-14 Di2510/Di3010/Di 3510 6 Press the [Start] key..
Available Features 3 Di2510/Di3010/Di35 10 3-15 Reducing Paper Us age Double-sided copying and 2in1 copying are useful in economi zing on printed pages or reducing the size of a thick document. As an example, the procedure for combining two sin gle-sided document pages into a double-sided copy is described below.
3 Available Features 3-16 Di2510/Di3010/Di 3510 2 Touch [Orig. > Copy], and then touch [4in1/Booklet]. 3 Touch [Double-2in1]. 4 Press the [Start] key.
Available Features 3 Di2510/Di3010/Di35 10 3-17 Reducing Electricity Usage The copier can be set to a l ow power mode to conserve energy. In order to perform these op erati ons, the Energy Save mode and the Sleep mode can be used to auto matically set the copier to an energy- saving mode when the copier is not used for a specified length of time.
3 Available Features 3-18 Di2510/Di3010/Di 3510 5 Press the [C] key to erase the current value, and then use the 10- Key Pad to specify the desired length of time until the copier enters Energy Save mode. 6 Touch [Enter]. 7 Touch [Sleep Mode Setting].
Available Features 3 Di2510/Di3010/Di35 10 3-19 9 Touch [Enter]..
3 Available Features 3-20 Di2510/Di3010/Di 3510.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-1 4 Before Making Copies 4.1 Names of Control Pane l Parts and Their Functions 1 23 4 5 6 7 8 9 10 11 12 17 16 15 14 13 No. Part Name Function 1 Touch panel Displays various scree ns and messages Touch items in the touch panel to select screens and specify settings.
4 Before Making Copies 4-2 Di2510/Di3010/Di 3510 10 Stop key • Press to stop a copy operation. • Press to stop the scanning of a document. 11 Start key Press to start a scanning or copy operat ion. 12 10-Key Pad Use to enter a number, such as the number of copie s.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-3 4.2 Checking the Settings The currently selected settings can be reviewed. In addition, the specified settings can be changed or stored for later use. There are four screens that al low you to check the settings.
4 Before Making Copies 4-4 Di2510/Di3010/Di 3510 To change the settings 1 Press the [Mode Check] key in the control panel. The first screen showing the current settings appears. 2 Display the screen containing the setting that you w ish to change. H To change the screens, touch [Next] and [Back].
Before Making Copies 4 Di2510/Di3010/Di35 10 4-5 4.3 User Accessibility Operations Various functions, such as the screen mode and the volume of alarms, can be specified, allowing the copier to be used more easily. 1 Press the [Accessibility] key in the control panel.
4 Before Making Copies 4-6 Di2510/Di3010/Di 3510 To change the screen display se tting (“Screen Mode” function) Select whether the screens appear in th e touch panel in black on white or in white on black. 1 Press the [Accessibility] ke y in the control panel.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-7 To change the key settin gs (“Key Speed Settings” function) If the same key is held down, charac ters and number can be repeatedly entered. 1 Press the [Accessibility] ke y in the control panel. 2 Touch [Key Speed Settings].
4 Before Making Copies 4-8 Di2510/Di3010/Di 3510 To change the auto panel reset ti me (“Confirming Screen” function) If no operation i s performed for a specif ied len gth of time, the touch panel display returns to the Basics scree n.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-9 To change the display time for the “The job is accepted.” screen (“Notification Sc reen” function) The length of time that the “The job is accepted.” screen, which requests confirmation of a reception number or job No.
4 Before Making Copies 4-10 Di2510/Di3010/Di 3510 To change the volume of touch panel beeps and alarms (“Sound Setting” function) The volumes of the be ep that is sou nde d when a touch pa nel button is touched and of the alarm that i s sounded when a malfunction occurs can be specified.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-11 4.4 Enlarging the Touch Panel Screens Press the [Enlarge Display] key to enl arge the screens that appear in the touch panel. Press the [Enlarge Displa y] key again to return the screens to the standard size.
4 Before Making Copies 4-12 Di2510/Di3010/Di 3510 4.5 Turning the Copier On and Off To turn on the copier 1 Set the power switch to “I”. 2 Make sure that the sub power switch has been pressed in. When the copier is turned on § A few seconds after the copier is turned on, the message “Now warming-up.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-13 To turn off th e copier 1 Touch [Activity List] to check that no jobs are queu ed. 2 If any printed pages rema in in the paper output tray, remove them. 3 Press the sub power switch to turn off the copier.
4 Before Making Copies 4-14 Di2510/Di3010/Di 3510 Auto Panel Reset When a specified p eriod has passed, thes e will reset to the default settings. Conditions for auto panel resetting G 1 minute, or a specified period after the copier is last used (factory default settings are 1 minute).
Before Making Copies 4 Di2510/Di3010/Di35 10 4-15 Sleep Mode In order to conserve energy, th e copi er’s heater goes off and the copie r automatically enters Sleep mode if no operation i s performed for a specified length of time. Conditions for entering Sleep mode G No copier operation is performed for 1 minute.
4 Before Making Copies 4-16 Di2510/Di3010/Di 3510 4.6 Adjusting the Angle of the Control Panel The control panel can be adjusted to any of three angles. Adjust the control panel to the an gle that allows for easy operation. § Pull the control panel release lever, and the n adjust the angle of the control panel.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-17 4.7 Using the Touch Panel Description of th e Touch Panel When the copier is turned on, the screen shown bel ow appears in the touch panel.
4 Before Making Copies 4-18 Di2510/Di3010/Di 3510 Operating the Touch Panel To activate a function or to select a setting, lightly touch th e desired function or settin g shown on the touch panel.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-19 Description of the Scre ens Settings screen 1. Screen tabs 2. Message display 3. Available functions 4. Selected settings 5. Additional message and settings display No. Item Name Description 1 Screen tabs Each screen contains various functi ons that can be specified.
4 Before Making Copies 4-20 Di2510/Di3010/Di 3510 Job List Screen The operating status of the copier and the pri nting order of queued jobs can be viewed from this screen.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-21 To check the status of a job 1 Touch [Job List]. 2 Select the j ob whose st atus you wish to check. Tip The statuses of up to four jobs are displaye d. Touch the a rrow keys to view the status of a job that is not displayed.
4 Before Making Copies 4-22 Di2510/Di3010/Di 3510 To check th e printing order 1 Touch [Job List]. 2 Touch [Print Order]. 3 Check the printing order. H Touch the arrow keys to view other parts of the list. Up to 8 items in the printing order can be displayed.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-23 To check/delete listed items from the Print screen 1 Touch [Job List]. 2 Touch [Print]. 3 Select the j ob whose st atus you wish to check. H Touch the arrow keys to view other part s of the li st. 4 After checking the necessary information, touch [Enter].
4 Before Making Copies 4-24 Di2510/Di3010/Di 3510 Memory Recall After printing of a copy job is finished, the image that was just copied can be printed again without the documen t being loaded.
Before Making Copies 4 Di2510/Di3010/Di35 10 4-25 To use the memory recall feature 1 After copying is finished, touch [Job List]. 2 Touch [Memory Recall Waiting]. The information for the job still saved in the memo ry is displayed. 3 Touch [Memory Recall] H To delete the job still saved in the memory, touch [Delete].
4 Before Making Copies 4-26 Di2510/Di3010/Di 3510.
Basic Copy Operations 5 Di2510/Di3010/Di35 10 5-1 5 Basic Copy Operations 5.1 Making Basic Copies The procedure for making basic copie s is described below. 1 Position the do cument(s) to be copie d. H For details, refer to “1 0 Original Documents”.
5 Basic Copy Operations 5-2 Di2510/Di3010/Di 3510 H To erase a margin in the copy, to i nsert interleave while cop ying onto overhead pr ojector transparencies, or to perform a ny other special operation, touch [Auxilia ry]. For details, refer to chapte r “6 Auxiliary Functions”.
Basic Copy Operations 5 Di2510/Di3010/Di35 10 5-3 5.2 Stopping Copying Follow the procedure described be low to cancel a copy job. To stop/restart/delete a cop y job 1 Press the [Stop] key while the job is being printed. Copying stops. 2 The message “Copy cycle temporarily suspended.
5 Basic Copy Operations 5-4 Di2510/Di3010 /Di3510 5.3 Interrupting a Copy Job The current copy job can be pause d so that a copy of a differ ent document can be made. This is convenient if you wish to q u ickly make copies of a short document while a large job is being printed.
Basic Copy Operations 5 Di2510/Di3010/Di35 10 5-5 5.4 Making Copies Using Accounts Using the “Copy Track Mode” Parameter The number of copies al lowed for each registered account can be restricted. The accounts can be managed by touching [Account management] on the Admin.
5 Basic Copy Operations 5-6 Di2510/Di3010 /Di3510 3 Press the [Access] key. The Basics screen appears. 4 Make copies using the desired copy settings. 5 When you are finished making copies, press the [Access] key. The access code input screen appears again.
Auxiliary Functions 6 Di2510/Di3010/Di35 10 6-1 6 Auxiliary Functions This chapter contains descriptions on making copies using th e Auxiliary functions. 6.1 “Cover Mode” Function Adding Cove r Pages When two or more sheets are being copied, cover pag es using paper other than the document paper can be added.
6 Auxiliary Functions 6-2 Di2510/Di3010 /Di3510 G Front Cover: Blank Back Cover: With Image G Front Cover: With Image Back Cover: None G Front Cover: With Image Back Cover: Blank G Front Cover: With I.
Auxiliary Functions 6 Di2510/Di3010/Di35 10 6-3 To make settings for th e “Cover Mode” func tion 1 Load the document into the duplexing document feeder. 2 Touch [Auxiliary], and then touch [Cover Mode]. 3 Select the desired Front Cover and Back Cover settings, and then touch the button below “Cover Paper”.
6 Auxiliary Functions 6-4 Di2510/Di3010 /Di3510 6.2 “Page Insertion” Function Inserting Pages (Interlea ves) Between Copies When two or more sheets are being copied, pa per (interleaves) other than the document paper can be inse rted.
Auxiliary Functions 6 Di2510/Di3010/Di35 10 6-5 To make settings for the “Page Insertion ” function 1 Load the document into the duplexing document feeder. 2 Touch [Auxiliary], and then touch [Page Insertion]. 3 Select either the [With Image] or the [Blank] Page Insertion setting, and then touch the butt on below “Insert Paper”.
6 Auxiliary Functions 6-6 Di2510/Di3010 /Di3510 6.3 “OHP Interleaving” Function Inserting Pages Between Copie s of Transparencies When copying overhead projector trans pa rencies, paper (interleaves) can be inserted between copies of the transparencies.
Auxiliary Functions 6 Di2510/Di3010/Di35 10 6-7 To make settings for the “O HP Interleaving” function 1 Load the document into the duplexing document feeder or position it on the original glass. 2 Touch [Auxiliary], and then touch [OHP Interleaving].
6 Auxiliary Functions 6-8 Di2510/Di3010 /Di3510 6.4 “File Margin” Function Making Copies With Bind ing Margins Copies can be made with binding margins an d the image shifted to the side so that the text is not hidden when the copies are bound.
Auxiliary Functions 6 Di2510/Di3010/Di35 10 6-9 To make settings for th e “File Margin” function 1 Load the document into the duplexing document feeder or position it on the original glass. 2 Touch [Auxiliary], and then touch [File Margin]. 3 Select the desired File Margin setting.
6 Auxiliary Functions 6-10 Di2510/Di3010 /Di3510 6.5 “Edge/Frame Erase” Function Erasing Sections of Copies When copying documents with pun ch holes, the pages can be printed with part of the document erased. Edge/Frame Erase settings G The left side of the document is erased.
Auxiliary Functions 6 Di2510/Di3010/Di35 10 6-11 To make settings for the “Edge/Frame Erase” function 1 Load the document into the duplexing document feeder or position it on the original glass. 2 Touch [Auxiliary], and then touch [Edge/Frame Erase].
6 Auxiliary Functions 6-12 Di2510/Di3010 /Di3510 6.6 “Image Repeat” Function Printing Multiple Copies o f the Same Document P a ge on One Sheet The “Image Repeat” function can be used as shown below.
Auxiliary Functions 6 Di2510/Di3010/Di35 10 6-13 4 Select the size of the document. H If the document has a non- standard size, touch [Custom Size], and then specify the size of the document. 5 Touch [X]. Use the 10-Key Pad to type in the length of side X for the paper that is loaded.
6 Auxiliary Functions 6-14 Di2510/Di3010 /Di3510 6.7 “Distribution #” Function Printing Distrib ution Numbers on Sets of Copies Each set of copies can be printed with a distribution number added to the background. Tip If the “Distribution #” function is used, the “Sort” Finishing setting is selected.
Auxiliary Functions 6 Di2510/Di3010/Di35 10 6-15 4 Specify the desired Distribution # settings. H Using the 10-Key Pad, type in the first distribution number to be printed. H If [First page only] is selected, the distribution number is only printed on the first page of each copy set.
6 Auxiliary Functions 6-16 Di2510/Di3010 /Di3510 6.8 “Watermark” Function Copies can be printed with a wate rmark added to the background. To make settings for the “Watermark ” function 1 Load the document into the duplexin g document feeder or position it on the original glass.
Auxiliary Functions 6 Di2510/Di3010/Di35 10 6-17 6.9 “Image Stamping” Function With this function, copies can be printed with a watermark of a scanned image added to the background. Refer to “Registering an Image Stamp” on page 7-31 for registration methods.
6 Auxiliary Functions 6-18 Di2510/Di3010 /Di3510 5 Select the desired printing position . H If [First page only] is selected, the image is only printe d on the first page. H If [All Pages] is selected, the image is printed on all pages. 6 Touch [Enter].
Auxiliary Functions 6 Di2510/Di3010/Di35 10 6-19 6.10 “Black-White Reverse” Function Reversing White- and Black-Color ed Areas of Copies Copies can be printed with the whit e- and bl ack-colored areas of the original image reversed. Tip The white and black colors of the distribution number and waterma rk will not be reversed.
6 Auxiliary Functions 6-20 Di2510/Di3010 /Di3510 6.11 “Separate Scan” Function Scanning a Document in Separate Batches When copying a document with a large number of pages, the document can be divided and sca nned in separate batch es, and then it can be printed as a single document.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-1 7 Utility Mode Operations 7.1 Utility Mode Screens This chapter contains descriptions on the vario us copy programs and settings available i n the Utility mode. Utility screen This screen appears when the [Utility] key is pressed.
7 Utility Mode Operations 7-2 Di2510/Di3010 /Di3510 Meter Count screen This screen shows the total number of copies printed since the cop ier was installed.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-3 Administrator Management screens There are two screens: Administrato r Management 1 and Administrator Management 2. The administrator ac cess cod e must be entered before these screens can be displayed.
7 Utility Mode Operations 7-4 Di2510/Di3010 /Di3510 7.2 User’s Choice Functions The functi ons availabl e on the User’s Cho ice screen are descri bed below. Changing the settings for the following fu nctions changes the default setting (the setting sele cted after the copier is turned on or the [Panel Reset] key is pressed).
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-5 5/6 Intelligent Sort ing ON , OFF Output Tray Specify the bin of the finisher (opt ion). “Small” Originals ON, OFF Scanner Dry S pecify the time for dehumidifying t he scanner.
7 Utility Mode Operations 7-6 Di2510/Di3010 /Di3510 7.3 Changing Default Settings The procedures for changing each of the User’s Choice settings are described below. To set the “Memor y Recall” function This function is used to specify whet her o r not the last image copied can be recalled and printed again.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-7 To set the “Mixed Original Detection” fun ction This function is u sed to specify whether or not the “Mixed Original Detection” function is set as the default. 1 Press the [Utility] key. 2 Touch [User’s Choice].
7 Utility Mode Operations 7-8 Di2510/Di3010 /Di3510 To set the “Language Selected for LCD” functio n This function is used to sp ecify the lang uage for the screens that a ppear in the touch panel. 1 Press the [Utility] key. 2 Touch [User’s Choice].
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-9 To set the “O riginal > Copy De fault” function The function specifies the defa ult Orig. Ö Copy setting. 1 Press the [Utility] key. 2 Touch [User’s Choice]. 3 Touch [2/6], and then touch [Original > Copy Default].
7 Utility Mode Operations 7-10 Di2510/Di3010 /Di3510 To set the “Auto Pa pe r/Auto Size” function This function is used to specify whether the “Auto Paper” Pa per setting, the “Auto Size” Zoom settin g or the “Manual” setting is set as the defaul t.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-11 To set the “Drawer Priority” function You can specify the priority of the p aper that is sel ected (paper drawer). For example, if you specify a paper drawer for paper that you use frequently, (recycled pap er, single-sided only paper, etc.
7 Utility Mode Operations 7-12 Di2510/Di3010 /Di3510 To set the “Special Paper” function This function is used to sp ecify the default pape r type for a paper dra wer when special paper, for example, recycled paper, is loaded into a particular paper drawer.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-13 H : Special paper Selecting this mode will mean that when usi ng auto paper selection, this will not be included in auto tray cha nge. When using colored paper for cover pages or interleaves, selecting this setting reduces operating errors.
7 Utility Mode Operations 7-14 Di2510/Di3010 /Di3510 To set the “Multiple-in-1 an d Booklet Co py Zoom” function This functi on is used to specify wh ether or not the preset Zoom setting appropriate for the document and p aper size is set when a 2in1 or a 4in1 Copy setting is selected.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-15 To set the “Energy Save Mode” function This function is u sed to specify when the copier automatically ente rs Energy Saver mode after no operation is performed for the set length of time. 1 Press the [Utility] key.
7 Utility Mode Operations 7-16 Di2510/Di3010 /Di3510 To set the “Sleep Mo de Setting” function This function is used to specify the perio d of time where there i s no input, after which the copier automa tically turns the printer heater off. To display [No Reset], you need to first display [No Reset] in Specifying Administrator Settings.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-17 To set the “LCD Back-light Off” function This function is u sed to specify wh en the backli ght for the touch panel automatically goes off after no opera tion is performed for the set length of time.
7 Utility Mode Operations 7-18 Di2510/Di3010 /Di3510 To set the “Auto Pa nel Reset” function This function is u sed to specify wh en the Basics screen is automatically displayed if no operation is performed while a prog ram or settings are being specified.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-19 To set the “Plug-In Counter, ID key Reset” fun ction Pressing the [Access] key when specifying administrator settings specifies whether or not to return to defa ult settings, with the exception of when the data contro ller magnetic card i s removed.
7 Utility Mode Operations 7-20 Di2510/Di3010 /Di3510 To set the “4in1 Co py Order” function This function is used to specify the page orien tation for making 4in1 copies. 1 Press the [Utility] key. 2 Touch [User’s Choice]. 3 Touch [4/6], and then touch [4in1 Copy Order].
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-21 To set the “Density Priority” func tion This specifies the default printi ng density / cop y mode sett ings. 1 Press the [Utility] key. 2 Touch [User’s Choice]. 3 Touch [4/6], and the n touch [Density Priority].
7 Utility Mode Operations 7-22 Di2510/Di3010 /Di3510 To set the “Default Copy Output Levels” fu nction This specifies the auto and manual defau lt printing density level settings. 1 Press the [Utility] key. 2 Touch [User’s Choice]. 3 Touch [4/6], and th en touch [Default Copy Output Levels].
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-23 To set the “Printing Density ” function This specifies the default printi ng density level settin gs from -2 to 2, in 5 steps. 1 Press the [Utility] key. 2 Touch [User’s Choice]. 3 Touch [4/6], and then touch [Printing Density].
7 Utility Mode Operations 7-24 Di2510/Di3010 /Di3510 To set the “Output Priority” function This specifies the default fi nishing m odes that are selected by priority. 1 Press the [Utility] key. 2 Touch [User’s Choice]. 3 Touch [4/6], and then touch [Output Priority].
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-25 To set the “Intelligent Sor ting” function This function is u sed to specify wh ether or not the “Sort” and the “Non- Sort” settings are automatically sele cted according to the number of pages in the document.
7 Utility Mode Operations 7-26 Di2510/Di3010 /Di3510 To set the “Ou tput Tray” functi on (optional ) This functi on is used to specify ho w copies and computer printouts are separated and whic h output tray they are assigned to. Tip [Output Tray] only appears if the finisher or the job separator is installed.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-27 To set the ““Small” Originals” function This function is u sed to specify whet her or not a small-sized original can be copied when the [Start] key is pressed. 1 Press the [Utility] key. 2 Touch [User’s Choice].
7 Utility Mode Operations 7-28 Di2510/Di3010 /Di3510 To set the “Scanner Dry” function The automa tic scanner d ry function ma y be set in order to pr event condensation on the scan ner resu lting from sudden temperature changes. 1 Press the [Utility] key.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-29 To set the “Crease/Center Staple” fu nction (Only when the finisher or saddle ki t are installed ) When the optional saddle kit (includi ng the finisher) is installed, this controls the offset for creases crea ted using the booklet creation mode, and for any specified center staples.
7 Utility Mode Operations 7-30 Di2510/Di3010 /Di3510 To set the “Density (A DF only)” function (O nly when the duplexing document feeder is installed) This functi on is used to adj ust the density level when the optional duplexing document feede r is used.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-31 7.4 Registering an Image Stamp Before the Auxiliary function “Im age Stamping” can be used , an image must be registered. A maximum of five images can be registered. For details on using the “Image St amping” function, refer to ““Image Stamping” Function ” on page 6-17 .
7 Utility Mode Operations 7-32 Di2510/Di3010 /Di3510 5 Select the size of the image documen t. Touch [Enter]. To continue scan ning a standard- sized image document, skip to step 9.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-33 7.5 Viewing Counters (“Meter Count” Function) With the “Meter Count” function, the following counters can be viewed. To view th e counte rs 1 Press the [Utility] key. 2 Touch [Meter Count]. 3 After checking the various counters, touch [Exit].
7 Utility Mode Operations 7-34 Di2510/Di3010 /Di3510 7.6 Using Copy Programs Up to 10 sets of copy setting s can be store d as copy programs. To store a copy program 1 Press the [Mode Check] key. 2 Touch [Job Mem Inpu t], and then touch the number where you wish to store the copy p rogram.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-35 To delete a copy pro gram Individual copy p rograms can be del eted. 1 Press the [Mode Check] key. 2 Touch [Job Mem Input]. 3 Touch the number button assigned with the copy program that you wish to delete, and then touch [Delete].
7 Utility Mode Operations 7-36 Di2510/Di3010 /Di3510 To use a copy progra m 1 Press the [Utility] key. 2 Touch [Copy Job Recall]. 3 Touch the button assigned wi th the copy program that you wish to use. H Only buttons that have been assigned a copy pro gram are displayed.
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-37 7.7 User Management Functions The following settings can be spe cified or operations can be pe rformed from the User Management screen.
7 Utility Mode Operations 7-38 Di2510/Di3010 /Di3510 To clean the touch pa nel (“Panel Cleanin g” function) By setting panel cleaning, you can clean the panel without accidental ly pressing panel butto ns. 1 Press the [Utility] key. 2 Touch [User Manage ment], and then touch [Panel Cleaning].
Utility Mode Operations 7 Di2510/Di3010/Di35 10 7-39 To dehumidify the dupl exing document feeder (“Dehumidify” function) When there are rapid ch anges in the temperature of a room, or high humidity, condensation may occur on the surface of th e p hotosensitive receptor drum or the scanner on the copier, resulting in blurred images.
7 Utility Mode Operations 7-40 Di2510/Di3010 /Di3510 To replenish the toner (“To ner Replenisher” function) This function is used when copies ar e te mporarily faint al though plenty of toner remains, such as i mmediately after the ton er bottle is replaced o r after copying a large quan tity of documen ts with l arge printed areas.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-1 8 Administrator Management Operations 8.1 Administrator Management Screens To display the Administrator Management scr eens This explains the method for di splaying the Administrator Manage ment screens.
8 Administrator Manageme nt Operations 8-2 Di2510/Di3010 /Di3510 Keep the administrator code (Admin. Password) in a safe place hidden from the general user. 4 Touch [Admin. 1] or [Admin. 2] to display the desired screen. H For details on the Administrator Management 1 screen, refer to page 8-3.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-3 8.2 Initial Settings Specify the da te and time Specify the date and time so that they will be correctly recorded in the reports.
8 Administrator Manageme nt Operations 8-4 Di2510/Di3010 /Di3510 H Enter four digits for the year. H Enter the time in the 24-hour format. 6 Continue touching [En ter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-5 Specify the time zon e Specify the time differ ence from Green wich Mean Time, which is adde d to the header of mails that are sent.
8 Administrator Manageme nt Operations 8-6 Di2510/Di3010 /Di3510 8.3 Administrator Settings Changing the administr ator access code This explains the metho d to specify or change the administrator access code.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-7 To allow access to Ad ministrator mode, turn the machine off, then on again. 5 Touch [New Code], and then use the 10-Key Pad to type in the new 8-digit administrator code (Admin. Password).
8 Administrator Manageme nt Operations 8-8 Di2510/Di3010 /Di3510 Copy Number Limits This is used to specify the maximum nu mber of copies that can be printed.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-9 Disable Sleep Mo de This parameter is used to disable the Sleep function, which automatically turns off the printer heater after no op eration is performe d for a specified length of time.
8 Administrator Manageme nt Operations 8-10 Di2510/Di3010 /Di3510 8.4 Account Management Settings Account Management Mode The number of copies and the number of prints can be managed per account. Additionally, users can be limited b y management of accoun ts.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-11 To set the Account Management Mod e You can manage the number of pages that can be copied per account. 1 Follow the pr ocedure descri bed in “To display the Administrator Management screens” on page 8-1 to display th e Administrator Management screen.
8 Administrator Manageme nt Operations 8-12 Di2510/Di3010 /Di3510 Note When setting [100 Accounts 1] or [100 Accou nts 2], please program account names, etc.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-13 Account Informa tion data When carrying out a ccount management settings, you can confirm usage for each account, or clear counter va lu es. Alternatively, when carryin g out 100 Account Management, you can change account numb ers, print maximum limits, and access codes.
8 Administrator Manageme nt Operations 8-14 Di2510/Di3010 /Di3510 Clear all counters 1 Follow the proc edure described in “To display the Administrator Management screens” on page 8-1 to display the Administrator Management screen. 2 Touch [Admin.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-15 Changing Accoun t Information 1 Follow the pr ocedure descri bed in “To display the Administrator Management screens” on page 8-1 to display th e Administrator Management screen. 2 Touch [Admin.
8 Administrator Manageme nt Operations 8-16 Di2510/Di3010 /Di3510 8.5 Setting Account Registration Account Registration Accounts can be registered for dep artments in a company or for individuals. The number of prints c an be restricted for each account, access codes specified, or un authoriz ed use of the copier restricted.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-17 5 To enter the name of the account, use the character buttons that appear in the touch panel. 6 Touch [Enter]. 7 Touch [Access Number], and enter the access code for the account. 8 Touch [Enter].
8 Administrator Manageme nt Operations 8-18 Di2510/Di3010 /Di3510 11 Touch [Max. Print Page], and enter the upper print limit u sing the 10-Key Pad. 12 Touch [Enter]. Tip Where you wish to change the programmed details, repea t from step 3, entering the correct detail s.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-19 Account Counter The number of prints made by each account can be checked. To check the number of prints mad e by each account 1 Follow the pr ocedure descri bed in “To display the Administrator Management screens” on page 8-1 to display th e Administrator Management screen.
8 Administrator Manageme nt Operations 8-20 Di2510/Di3010 /Di3510 8.6 Setting Machine Access Get Penalty The “Get Penalty” function is used to spe cify whether (“On”) or not (“Off”) access to Administrator mode, mailbox print jobs and user boxes is monitored .
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-21 8.7 Configuring Functions (Soft Switches) Soft switches for functions ca n be set according to your use.
8 Administrator Manageme nt Operations 8-22 Di2510/Di3010 /Di3510 Specifying Settings fo r Resetting Copy Mode with the Duplexing Documen t Feeder Installed (Mo de 429) Settings can be specified for the time until Copy mode is reset a fter a copy job scanned using the duplexing document feeder is finished.
Administrator Managemen t Operations 8 Di2510/Di3010/Di35 10 8-23 8.8 Removing Penalties Free Penalty If the “Get Penalty” function is set to “ON” and the optiona l printer controller is installed , the penalty must be removed in order to allow access after incorrect attempts to access mailbo x print jobs and mail boxes.
8 Administrator Manageme nt Operations 8-24 Di2510/Di3010 /Di3510.
Copy Paper 9 Di2510/Di3010/Di35 10 9-1 9 Copy Paper 9.1 Paper Specifications Use paper that meets the following specifications. Paper Types * LCC: Large capacity cabinet 2 : Available—: Not available Paper Sizes Non-standard-sized paper Paper Type Plain Paper Special Me dia Recycled Paper Paper Source, Etc.
9 Copy Pape r 9-2 Di2510/Di3010 /Di3510 * LCC: Large capacity cabin et —: Not available Standard-sized pap er * LCC: Large capacity cabin et 2 : Available—: Not available Paper Source Paper Width .
Copy Paper 9 Di2510/Di3010/Di35 10 9-3 Paper Capacity * LCC: Large capacity cabinet —: Not available Note The 3rd paper drawer (large capacit y cabinet), th e 3rd paper drawer and the 4th paper drawer are o ptional. If the optional duplex unit is used to make double-sided cop ies, only plain and recycl ed paper can be used.
9 Copy Pape r 9-4 Di2510/Di3010 /Di3510 9.2 Unsuitable Paper The following types of paper should not be used, otherwise decreased print quality, paper misfeeds or damage to the machine may occur. G Overhead projector tran sparencies that have already been fed through the machine Even if the transparency is st ill blank, do not reuse it.
Copy Paper 9 Di2510/Di3010/Di35 10 9-5 9.3 Print Area Any part of the image within the area indicated below is not copie d. G A margin 4 ± 2 mm (at full size) from the leadi ng edge of the p aper (A).
9 Copy Pape r 9-6 Di2510/Di3010 /Di3510 9.5 Automatically Selecting the Paper Source If the selected paper drawer runs out of paper while a copy job is being printed and a different paper drawer is loaded with pap er meeting the following conditions, the oth er paper drawer is automatically selected so printing can continu e.
Copy Paper 9 Di2510/Di3010/Di35 10 9-7 9.6 Loading Paper While loading paper, be sure to observe the following precautions. G If the paper is curled, flatten it before l oading it. G Do not load so much paper that the top of the stack is higher tha n the Ä mark or exceeds the specified number of sheets.
9 Copy Pape r 9-8 Di2510/Di3010 /Di3510 Loading Pa per Into th e 1st/2nd/ 3rd/4th Pap er Drawer Load paper into the 1st or 2nd paper drawer or the optional 2 way paper feed cabinet and paper feed cabinet, (3rd or 4th pape r drawer) as described below.
Copy Paper 9 Di2510/Di3010/Di35 10 9-9 Loading Paper Into the Large Capacity Cabinet Load paper into the large capacity cabinet as described belo w. 1 Press the drawer release button. Note When the power is turned off, the paper supply ca ssette can not be released, eve n by pushing the drawer release button.
9 Copy Pape r 9-10 Di2510/Di3010 /Di3510 Loading Paper Into the Multiple Bypass Tray Use the multiple bypass tray when printing o n plain paper, postcards, envelopes, overhead projecto r tr ansparencies and label sheets. Copying onto the lower side of the set paper.
Copy Paper 9 Di2510/Di3010/Di35 10 9-11 To load postcards § When loading p ostcards, load them with the shorter side as the leading edge, as shown in the illustration, and with the side to be printed on facing down. Note Do not load more than 50 postcards.
9 Copy Pape r 9-12 Di2510/Di3010 /Di3510 To load envelopes § When loading envel opes, load them with the flap facing up , as shown in the illustration.
Copy Paper 9 Di2510/Di3010/Di35 10 9-13 To load overhead pr ojector transparencies § When loading overhead proje ctor transparencies, load them in the same orientation as the document. Note Do not load more than 50 transparencies. After you have loaded the paper, set the paper type for the Multiple Bypass Tray in the touch panel.
9 Copy Pape r 9-14 Di2510/Di3010 /Di3510 To set a non-standard (custom) paper size If non-standard-sized paper is loaded, it will be necessary to enter the paper size. Two non-standard pape r sizes can be stored for easy selection. For details, refer to the next section.
Copy Paper 9 Di2510/Di3010/Di35 10 9-15 5 Touch [Y] and press the [C] key. Then, using the 10-Key Pad, type in the length of side Y for the document. 6 Touch [Enter].
9 Copy Pape r 9-16 Di2510/Di3010 /Di3510 To store a n on-standard (cu stom) paper size Two non-standard pape r sizes can be stored. Storing paper sizes th at are used often enables the paper size to be selected quickl y.
Copy Paper 9 Di2510/Di3010/Di35 10 9-17 4 Touch [X] and press the [C] key. Then, using the 10-Key Pad, type in the length of side X for the document. 5 Touch [Y] and press the [C] key. Then, using the 10-Key Pad, type in the length of side Y for the document.
9 Copy Pape r 9-18 Di2510/Di3010 /Di3510 To select a stored non-standar d (custom) paper size Copies can be made using the stored cu stom paper size. 1 Position the document(s) to be copied. 2 Touch [Paper]. 3 Touch the button for the multiple bypass tray, and then touch [Mod e Change].
Copy Paper 9 Di2510/Di3010/Di35 10 9-19 9.7 Selecting the Paper Setting The paper loaded into a pap er drawer or the multiple bypass tray can be selected for making copies. To select paper lo aded into a paper dra wer 1 Position the docu ment(s) to be copied.
9 Copy Pape r 9-20 Di2510/Di3010 /Di3510.
Original Documents 10 Di2510/Di3010/Di35 10 10-1 10 Original Documents 10.1 Feeding the Document Using the Duplexing Document Fe eder The duplexing document feeder automatically fee ds in, scans, then feeds out each page of a multi- page documen t, one page at a time.
10 Original Documents 10-2 Di2510/Di3010/Di 3510 Mixed Width Document Sizes 2 : Copying possible —: Copying not possible Maximum Document Width 297 mm 257 mm 210 mm 182 mm 148 mm 123 mm Mixed Width .
Original Documents 10 Di2510/Di3010/Di35 10 10-3 Precautions Concerning the Documents The following types of documents sho uld not be loaded into the dupl exing document feeder, otherwise paper mi sfeeds or damage to the document may occur. Instead, these types of docume nts should be positione d on the original glass.
10 Original Documents 10-4 Di2510/Di3010/Di 3510 10.2 Feeding the Docume nt Through the Duplexing Document Feeder Loading the Docu ment 1 Slide th e adjusta ble docum ent guides to fit th e size of the documen t. 2 Load the documen ts to be faxed o r copied face up.
Original Documents 10 Di2510/Di3010/Di35 10 10-5 4 Touch [Original Direction], and then select the setting appropriate for your document. Note If the orientation of the document is diff erent from that of the selected Original Direction setting, certain copy operations, such as 2 in1 or 4in1 copying, will not be printed correctly.
10 Original Documents 10-6 Di2510/Di3010/Di 3510 To load a documen t of mixed size s (“Mixed Orig Dete ction” function) With mixed width document detecti on, documents of various standard- sized pages can be scanned and copied as a set using the duplexi ng document feeder.
Original Documents 10 Di2510/Di3010/Di35 10 10-7 5 In the Basics screen, touch [Mixed Orig Detection]. 6 Select the desired copy settings, and then press the [Start] key.
10 Original Documents 10-8 Di2510/Di3010/Di 3510 10.3 Positioning Documents on the Original Glass The procedure for positioning the document differs dependin g on the type of document being copied, therefore be sure the document is positioned correctly.
Original Documents 10 Di2510/Di3010/Di35 10 10-9 To position sheet documents Follow the procedure described be low when copying plain paper or documents that cannot be fed thr ough the dupl exing document feeder.
10 Original Documents 10-10 Di2510/Di3010/Di 3510 To position transparen t or translucent documents Follow the procedure described be low when copying documents, such as overhead transparencies, tracing pape r or diazo pho tosensitive paper.
Original Documents 10 Di2510/Di3010/Di35 10 10-11 To positio n books or magazine s Follow the procedure described be low when copying bound documents, such as books and magazines. 1 In the Basics screen, touch [Orig. > Copy], and touch [Book]. Then, make other settings.
10 Original Documents 10-12 Di2510/Di3010/Di 3510 10.4 Loading Documents for Specific Applications The most appropriate document feed me thod and copy settings for specific applications are d escribed below. For details on specifying the various copy settings, refer to “11 Specifying Copy Settings”.
Original Documents 10 Di2510/Di3010/Di35 10 10-13 Single-Sided Docu ments Single-Sided Document Ö Single-Sided Copy Desired Copy Copy Setting Finishing Setting Margin Setting (Orig.
10 Original Documents 10-14 Di2510/Di3010/Di 3510 Single- 2in1 Corner Staple ——— Single- 2in1 Corner Staple ——— Single- 2in1 Hole Punch 2-Point Staple —— Single- 2in1 Hole Punch 2-Poin.
Original Documents 10 Di2510/Di3010/Di35 10 10-15 Single- 4in1 Corner Staple ——— Single- 4in1 Corner Staple ——— Single- 4in1 Hole Punch 2-Poin t Staple ——— Single- 4in1 Hole Punch 2-.
10 Original Documents 10-16 Di2510/Di3010/Di 3510 Single-Sided Document Ö Double-Sided Copy Desired Copy Copy Setting Finishing Setting Margin Setting (Orig.
Original Documents 10 Di2510/Di3010/Di35 10 10-17 Double- 2in1 Corner Staple —— Double- 2in1 Corner Staple ——— Double- 2in1 Hole Punch 2-Point Staple —— Double- 2in1 Hole Punch 2-Point S.
10 Original Documents 10-18 Di2510/Di3010/Di 3510 Double- 4in1 Corner Staple ——— Double- 4in1 Corner Staple —— Double- 4in1 Hole Punch 2-Point Staple ——— Double- 4in1 Hole Punch 2-Poin.
Original Documents 10 Di2510/Di3010/Di35 10 10-19 Left-Bound Double-Sided Doc uments Left-Bound Double-Sided Document Ö Single-Sided Copy Desired Copy Copy Setting Finis hing Setting Margin Setting (Orig.
10 Original Documents 10-20 Di2510/Di3010/Di 3510 Single- 2in1 Corner Staple ——— Single- 2in1 Corner Staple ——— Single- 2in1 Hole Punch 2-Point Staple —— Single- 2in1 Hole Punch 2-Poin.
Original Documents 10 Di2510/Di3010/Di35 10 10-21 Single- 4in1 Corner Staple ——— Single- 4in1 Corner Staple ——— Single- 4in1 Hole Punch 2-Point Staple ——— Single- 4in1 Hole Punch 2-P.
10 Original Documents 10-22 Di2510/Di3010/Di 3510 Left-Bound Double-Sided Document Ö Double-Sided Cop y Desired Copy Copy Setting Finishing Setting Margin Setting (Orig.
Original Documents 10 Di2510/Di3010/Di35 10 10-23 Double- 2in1 Corner Staple —— Double- 2in1 Corner Staple ——— Double- 2in1 Hole Punch 2-Point Staple —— Double- 2in1 Hole Punch 2-Point S.
10 Original Documents 10-24 Di2510/Di3010/Di 3510 Double- 4in1 Corner Staple ——— Double- 4in1 Corner Staple —— Double- 4in1 Hole Punch 2-Point Staple ——— Double- 4in1 Hole Punch 2-Poin.
Original Documents 10 Di2510/Di3010/Di35 10 10-25 Top-Bound Doub le-Sided Documen ts Top-Bound Double-Sided Document Ö Singl e-Sided Copy Desired Copy Copy Setting Finis hing Setting Margin Setting (Orig.
10 Original Documents 10-26 Di2510/Di3010/Di 3510 Single- 2in1 Corner Staple — Single- 2in1 Corner Staple —— Single- 2in1 Hole Punch 2-Point Staple — Single- 2in1 Hole Punch 2-Point Staple —.
Original Documents 10 Di2510/Di3010/Di35 10 10-27 Single- 4in1 Corner Staple —— Single- 4in1 Corner Staple —— Single- 4in1 Hole Punch 2-Point Staple — Single- 4in1 Hole Punch 2-Point Staple .
10 Original Documents 10-28 Di2510/Di3010/Di 3510 Top-Bound Double-Sided Document Ö Double-Side d Copy Desired Copy Copy Setting Finishing Setting Margin Setting (Orig.
Original Documents 10 Di2510/Di3010/Di35 10 10-29 Double- 2in1 Corner Staple — Double- 2in1 Corner Staple —— Double- 2in1 Hole Punch 2-Point Staple — Double- 2in1 Hole Punch 2-Point Staple —.
10 Original Documents 10-30 Di2510/Di3010/Di 3510 Double- 4in1 Corner Staple — Double- 4in1 Corner Staple —— Double- 4in1 Hole Punch 2-Point Staple — Double- 4in1 Hole Punch 2-Point Staple —.
Original Documents 10 Di2510/Di3010/Di35 10 10-31 10.5 Large Documents Precautions for A3 L/B4 L Copi es When making A3 L or B4 L copies, observe the following precautio ns concerning the orientation of the document and the positions of 2-point stapling or hole-punch ing.
10 Original Documents 10-32 Di2510/Di3010/Di 3510.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-1 11 Specifying Copy Settings 11.1 Specifying Finishing Settings Various finishing settings for sorting or grouping, sta pling or punching holes in copies are available. In the touch panel , touch [Basics], and then touch [Finishing].
11 Specifying Copy Settin gs 11-2 Di2510/Di3010/Di 3510 G Group The copies are automatically divided into stacks co ntaining copies of the same page. Only when the finisher is instal led G Corner Staple Copies printed with the “Sort” or “Group” setting are automatically stapled together in the upper-left corner.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-3 Only when the finish er is installed G Hole Punch Holes are punched in th e copies so they can be filed. This setting can be combined with the “Non-Sort”, “Sort”, “Group” or a staple setting.
11 Specifying Copy Settin gs 11-4 Di2510/Di3010/Di 3510 Notes on Using the “Sort” and “Group” Settings G If a document positioned o n the original glass is copied using the “Sort” setting, copying i s automatically performed using the “Separa te Scan” function.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-5 Shift Grouping Each page set is fed out shifted to alternating sides. Crisscross Grouping Each page set is fed out in an alternating crisscross pattern.
11 Specifying Copy Settin gs 11-6 Di2510/Di3010/Di 3510 To make copies using a stapling s etting 1 Position the document(s) to be copied. H For details, refer to “10 Original Documents”. 2 Touch [Sort], and after sele cting your desired sorting mode, touch staple mode.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-7 If “Corner Staple” was selected, the stapling position can not be specified. However, if the “Corne r St aple” setting is use d together with the “Hole Punch” setting, the stapling position can be speci fied.
11 Specifying Copy Settin gs 11-8 Di2510/Di3010/Di 3510 To make copies using the “Hole Pun ch” setting 1 Position the document(s) to be copied. H For details, refer to “10 Original Documents”. 2 Select “Non-Sort”, “Sort” or “Group”, and then touch [Hole Punch].
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-9 Creasing and Foldi ng When the option al finisher or saddle kits are installe d, you can set a crease to fold paper in two. Additional ly, you can add two staples in the middle of the paper (center stapling).
11 Specifying Copy Settin gs 11-10 Di2510/Di3010/Di 3510 Notes on the Staple Position The location that can be stapled differs depending o n the paper size and the paper orientation.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-11 When the “2-Point Staple” setti ng is selected When the finisher (FN-117) is installed Screen Icon Document Orientation Staple Posit ion Fee.
11 Specifying Copy Settin gs 11-12 Di2510/Di3010/Di 3510 Notes on the Number of Possible Stapled Sets While copying with a stapling setting , pages may become misaligned or fall. We recomme nd that no more than the number of sets li sted below be stapled.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-13 11.2 Specifying a Zoom Setting Copies of documents can be enlarged or reduced. In the touch panel , touch [Basics] , and then touch [Zoom]. A screen appears, showing the a vailable Zoom settin gs.
11 Specifying Copy Settin gs 11-14 Di2510/Di3010/Di 3510 H Touch the arrow keys to select the desired zoom rati o. Each time an arrow key is touched, the zoom ratio is incre ased or decreased by an increment of 0.001. G CustomZoom Any zoom ratio (between × 0.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-15 Specifying a “Custom Zoom” Settin g To enter a cus tom zoom ratio 1 Touch [Zoom]. A screen appears, showing the available Zoom settin gs. 2 Touch [CustomZoom]. 3 Use the 10-Key Pad to type in the desired zoom ratio (between × 0.
11 Specifying Copy Settin gs 11-16 Di2510/Di3010/Di 3510 To store Cus tom Zoom and Mi nimal zoom ratios 1 Touch [Zoom]. A screen appears, showing the available Zoom setting s. 2 Touch [CustomZoo m]. 3 Touch [Memorize Zoom]. 4 Use the 10-Key Pad to type in the desired zoom ratio (b etween × 0.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-17 To specify different vertical and horizontal scaling proportion s (“X/Y Zoom” setti ng) 1 Touch [Zoom]. A screen appears, showing the available Zoom settin gs. 2 Touch [CustomZoom]. 3 Touch [X/Y Zoom].
11 Specifying Copy Settin gs 11-18 Di2510/Di3010/Di 3510 11.3 Selecting the Orig. > Copy Settings In the touch panel, touch [Orig. > Copy]. A screen appears, showing the available document and copy settings. Orig. > Copy Settings G Single-Sided Ö Single -Sided A single-sided copy is produced from a single-sided document.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-19 G Double-Sided Ö Sing le-2in1 Only if the duplexing document feeder is installed : A single-sided copy i s produced from a double-sided d ocument.
11 Specifying Copy Settin gs 11-20 Di2510/Di3010/Di 3510 G Double-Sided Ö Double-4i n1 Only if the duplexing document feeder is installed: A double-sided copy is produced from four double-sided documents. G Book (Separation) Ö Si ngle-Sided Two single-sided cop ies are produced from a bound document.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-21 To specify Orig. > Copy settings 1 Position the docu ment(s) to be copied. H For details, refer to “1 0 Original Documents”. 2 Touch [Orig. > Copy]. 3 Select the setting for the type of document to be copied .
11 Specifying Copy Settin gs 11-22 Di2510/Di3010/Di 3510 H To select the “Double -2in1”, “Booklet Creation”, “Single-4in1” or “Double-4in1” settings, touch [4in1/Booklet]. H Select the desired type of copy, and touch [Enter]. 5 Touch [Original Dire ction].
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-23 Copying a Boun d Document The scanning position for bo und documents can be adjusted. The binding width can be seen by making copies with the “Single-Sided > Double-Sided” or th e “Double-Sided > Single-Sided” settings sel ected.
11 Specifying Copy Settin gs 11-24 Di2510/Di3010/Di 3510 5 Touch the big arrow keys to select the desired binding margin width. H The binding margin can be set between 0 mm and 20 mm, in 1 mm increments. 6 Touch [Enter]. 7 Press the [Start] key. The copies are printed.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-25 Copying a Book 1 Position the docu ment(s) to be copied. H For details, refer to “1 0 Original Documents”. 2 Touch [Orig. > Copy]. 3 Touch [Book]. 4 Select the appropriate setting for the binding position of the book (“Standard Book” o r “RightBound”).
11 Specifying Copy Settin gs 11-26 Di2510/Di3010/Di 3510 7 Select the desired Book Erase setting. Tip The pages can be copied with a blank area framing the text. The pages can be copied with a blank area along the binding. The pages can be copied with a blank area framing the text and along the bindin g.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-27 9 Touch [Enter]. 10 Select the desired copy settings. Note If you touch [Book], you can not select [Single-2in1] or [4in 1 / Booklet].
11 Specifying Copy Settin gs 11-28 Di2510/Di3010/Di 3510 Copying Book Page s onto Separate Double -Sided Pages 1 In the Basics screen, touch [Orig. > Copy], and then touch [Book]. The Book screen appears. 2 Select the appropriate setti ng for the binding position of the book (“Standard Book” or “RightBound”).
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-29 Tip Book page order Both the left and the right sides are double -sided. 7 Press the [Start] key.
11 Specifying Copy Settin gs 11-30 Di2510/Di3010/Di 3510 Quickly Se lecting Defa ult Settings The defau lt Orig. Ö Copy setting is “Single-Sided > Single-Sided”. Th e default setting can be changed to “Sing le-Sided > Double-Sided” or “Double-Sided > Double-Sided”.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-31 11.4 Specifying a Copy Density Selecting a Density Setting In the touch panel , touch [Densit y]. A scre en appears, showing the available Density settings. Select the appropriate setting for th e document to be copied (“Text”, “Photo” or “Text/Photo”).
11 Specifying Copy Settin gs 11-32 Di2510/Di3010/Di 3510 Selecting the “Photo” Setting Select the “Photo” setting when copying documents with halfton es such as photographs. 1 Position the document(s) to be cop ied. H For details, refer to “1 0 Original Documents”.
Specifying Copy Settings 11 Di2510/Di3010/Di35 10 11-33 Selecting the “Text/Photo” Setting Select the “Text/Photo” setting when copyi ng documents containing both text and photos. 1 Position the docu ment(s) to be copied. H For details, refer to “1 0 Original Documents”.
11 Specifying Copy Settin gs 11-34 Di2510/Di3010/Di 3510.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-1 12 Touch Panel Messages 12.1 When the Message “Ready to copy Please add toner.” Appears When the toner is nearly empty, the “Please add toner” message is displayed. After it is displayed, you can still print a pproximately 1000 pages, however please replace the bottl e as soon as possible.
12 Touch Panel Messages 12-2 Di2510/Di3010/Di 3510 12.2 When the Message “Please add toner.” Appears When the toner is empty, the message shown be low appears and printing can no longer be performed. Follow the procedure described be low to replace the tone r bottle.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-3 4 Carefully pull out the empty toner bottle. H Do not throw away th e empty toner bottle. Instead, keep it so that it can be collected by your service representative.
12 Touch Panel Messages 12-4 Di2510/Di3010/Di 3510 8 Flip down on the toner bottle ho lder until it locks into place. Grab the seal on the tone r bottler, and th en slowly pull it off toward you. 9 Fold down th e toner bottle holder, and then push in the toner hopper.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-5 12.3 When the Message “Stapler empty.” Appears When the staple cartridge is empt y, the message shown below appears and stapling can n o longer be performed. Follow the procedure described be low to replace the staple cartridge.
12 Touch Panel Messages 12-6 Di2510/Di3010/Di 3510 2 Pull the staple cartridge holder out toward you. 3 Press in the area marked “PUSH” to unlock the staple hold er. 4 Remove the empty staple cartridge from the staple cartridge holder. 5 Insert the new staple cartridge into the staple cartridge holder, and then carefully remove the stopper.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-7 6 Insert the refilled staple cartridge holder until it locks into place. 7 Close the front door..
12 Touch Panel Messages 12-8 Di2510/Di3010/Di 3510 To replace the staple ca rtridge for the saddle kit 1 While holding up the pap er output tray, remove the staple cartridge. 2 Press in the area marked “PUSH” to unlock the staple hold er. 3 Remove the empty staple cartridge from the staple cartridge holder.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-9 4 Insert the new staple cartridge into the staple cartridge holder. 5 Carefully remove the stopper. 6 Insert the refilled staple cartridge holder until it locks into place. CAUTION Be careful when installing the staple cartridge holder.
12 Touch Panel Messages 12-10 Di2510/Di3010/Di 3510 8 Open then shut the misfe ed- clearing door..
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-11 12.4 When a Paper Misfeed Occurs Locations of Paper Misf eeds 1 2 5 6 8 9 10 7 3 4 Message Description Message Description 1 A paper misfeed in the .
12 Touch Panel Messages 12-12 Di2510/Di3010/Di 3510 To clear a paper misfeed in the dupl exing do cument f eeder Follow the instructions that appear in the touch panel to open the document guide and remove any misfe d paper. 1 Pull up the lever for the misfeed- clearing cover, and then open the cover.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-13 5 While supportin g the document feed tray with your right h and, carefully pull out any misfed paper. 6 Return the document guide to its original positi on, and then close the misfeed-clearing cover.
12 Touch Panel Messages 12-14 Di2510/Di3010/Di 3510 To clear a paper misfeed in the fusing section CAUTION The area around the fusing unit is extremely hot. § Touching any part other those indicated may result in burns. If you get burnt, immediately cool the skin under cold water, and then seek professional medical attention.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-15 CAUTION Decreased copy quality may resu lt if the surface of the image transfer roller is touched. § Be careful not to touch the surface of the image transfer roller. 2 Carefully pull o ut any misfed paper.
12 Touch Panel Messages 12-16 Di2510/Di3010/Di 3510 4 Carefully pull out any misfed paper. 5 Open the switching guid e, and then carefully pull out any misfed paper in the switchback unit.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-17 7 Carefully pull o ut any misfed paper around the image transfer roller. 8 Carefully pull o ut any misfed paper.
12 Touch Panel Messages 12-18 Di2510/Di3010/Di 3510 To clear a paper misfe ed in the duplex un it 1 Open the duplex unit door. 2 Carefully pull out any misfed paper. 3 Close the duple x unit door. To clear a paper misfeed in the multiple b ypass tray 1 Pull out any misfed paper from the multiple bypass tray.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-19 To clear a paper mis feed in the 1st or 2nd pa per drawer 1 Open the multiple bypass tray. 2 Pull up the lower-right door release lever to open the lo wer-right door of the paper feed unit indicated in the touch panel message.
12 Touch Panel Messages 12-20 Di2510/Di3010/Di 3510 To clear a paper misfe ed in the 3rd or 4th pap er drawer 1 Pull up the lower-ri ght door release lever to open the lower-right door of the paper feed unit indicated in the touch panel message. 2 Carefully pull out any misfed paper.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-21 To clear a paper m isfeed in the large ca pacity cabinet 1 Pull up the lower-right door release lever to open the lo wer-right door of the paper feed unit indicated in the touch panel message. 2 Carefully pull o ut any misfed paper.
12 Touch Panel Messages 12-22 Di2510/Di3010/Di 3510 To clear a paper misfeed in the built in finisher 1 Open the front door. 2 Lower lever “FN1”, and then pull out any misfed paper.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-23 4 If the punch kit is installed: Pull out the punch box. 5 Lower lever “FN3”, and then pu ll out any misfed paper. 6 Return lever “FN1” and lever “FN3” to their original position. 7 If the punch kit is installed: Insert the punch box in to its original position.
12 Touch Panel Messages 12-24 Di2510/Di3010/Di 3510 To clear a paper misfe ed in the mail bin kit 1 Open the front door. 2 Turn dial “FN5” or d ial “FN6”, and then pull out any misfed paper. 3 While pressing down lever “FN7”, pull out any misfed pape r.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-25 4 Pull handle “FN8” to open the misfeed-clearing door. 5 Pull out any misfed paper in the mail bin.
12 Touch Panel Messages 12-26 Di2510/Di3010/Di 3510 To clear a paper misfe ed in the saddle kit 1 Open the front door. 2 Turn dial “FN5” or d ial “FN6”, and then pull out any misfed paper. 3 Remove all paper from the paper output tray. 4 Open the misfeed-clearing door, and then pull o ut any misfed paper.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-27 12.5 When the Message “Cannot Staple.” Appears To clear jammed staples When a finisher is installed an d th e staples are jammed, the message shown below appea rs. Follow the procedure described be low to clear the jammed staples.
12 Touch Panel Messages 12-28 Di2510/Di3010/Di 3510 2 Open the front door. 3 Lower lever “FN1”, and then pull out any misfed paper. 4 Turn dial “FN2”.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-29 6 Lower lever “FN3”, and then pu ll out any misfed paper. 7 Return lever “FN1” and lever “FN3” to their original position. 8 If the punch kit is installed: Insert the punch box in to its original position.
12 Touch Panel Messages 12-30 Di2510/Di3010/Di 3510 13 Pull the staple cartridge holder out toward you. 14 Push the staple holder guide up, and then pull out one sheet of staples. 15 Return the guide to its original position. 16 Insert the staple cartridge holder until it locks into place.
Touch Panel Messages 12 Di2510/Di3010/Di35 10 12-31 12.6 When the Message “Hole Punch collection box is full.” Appears If the punch kit is attached to the finisher, the following messa ge will appear when the punch box is full. Follow the procedure described be low to empty the punch box.
12 Touch Panel Messages 12-32 Di2510/Di3010/Di 3510 3 Empty the punch box. 4 Insert the punch box into its original position. 5 Close the front doo r..
Troubleshooting 13 Di2510/Di3010/Di35 10 13-1 13 Troubleshooting 13.1 Main Messages and Their Remedies Message Cause Remedy A malfunction was detected. Please call your te chnical representative and provide the code listed below: The copier malfunct ioned and is unable to print.
13 Troubleshooting 13-2 Di2510/Di3010/Di 3510 Properly close the section(s) indicated by the arro w (s). The door or cover indicated by the arrow is open. Make sure that all doors and covers are properly closed. The maximum number of copies allowed for this registered accou nt has been reached.
Troubleshooting 13 Di2510/Di3010/Di35 10 13-3 13.2 When Incorrect Copies Are Printed Symptom Possible Cause Remedy The printed output is too light. The “Auto” Density setting i s set too light. Adjust the “Default Copy Output Leve ls” functio n on the User's Choice screen.
13 Troubleshooting 13-4 Di2510/Di3010/Di 3510 There are dark specks or spots throughout t he printed output. There are streaks in the printed output . The original glass is dirty. Wipe the glass with a dry soft cloth. Either the document pad is dirty.
Troubleshooting 13 Di2510/Di3010/Di35 10 13-5 * If the problem is not corrected even afte r the operati ons described above are performed, contact your service representative. The edge of the printed output is dirty . The document pad is dirty. Clean the document pad with a soft cloth damp ened with a mild detergent.
13 Troubleshooting 13-6 Di2510/Di3010/Di 3510 13.3 When the Copier Is Not Operating Correctly * If the problem is not corrected eve n after the operations described are perf ormed, turn off the copier,unplug its power supply cord, and the contact your se rvice representative.
Appendix 14 Di2510/Di3010/Di35 10 14-1 14 Appendix 14.1 Specifications Copier Di2510/Di3010/Di3510 Specifi cation Type Desktop Platen Fixed platen (mirror scanning) Photo conductor OPC Copying system .
14 Appendix 14-2 Di2510/Di3010/Di 3510 First copy Di3510 Less than 4.8 seconds (for A4 C paper loaded into the 1st drawer) Di3010/Di2510 Less than 5.3 seconds (for A4 C paper loaded into the 1st drawer) Copy speed Di3510 For A4 C paper loaded into the 1st drawer: 35 sheets/min.
Appendix 14 Di2510/Di3010/Di35 10 14-3 Duplexing Docume nt Feeder AFR-19 Mixed Width Do cument Sizes 2 : Copying possible —: Copying not possible Specifi cation Document feed methods Plain pape r: S.
14 Appendix 14-4 Di2510/Di3010/Di 3510 Duplex Unit AD-16 Switchback Unit SB-1 Paper Feed Cabinet PF-124 Specification Paper type Plain paper, recycle paper (56 g/m 2 to 90 g/ m 2 ) Paper size A3 L, B4.
Appendix 14 Di2510/Di3010/Di35 10 14-5 2Way Paper Feed Cabinet PF-21 0 Large Capa city Cabine t PF-122 Specifi cation Paper type Plain paper, recycle pap er (56 g/m 2 to 90 g/m 2 ) Paper size A3 L, B4.
14 Appendix 14-6 Di2510/Di3010/Di 3510 Built in Finisher FN-117 Additional Bin Kit AK-1 Output trays 1st drawer, 2nd drawer Settings • Normal functions: “Non-sort”, “Sort ”, “Sort”/“St.
Appendix 14 Di2510/Di3010/Di35 10 14-7 Mail Bin Kit MK-1 Punch Kit PK-6 Saddle Kit SK-1 Specifi cation Number of bins 4 Bins Paper type Plain paper, recycle pap er (56 g/m 2 to 90 g/m 2 ) Paper size A.
14 Appendix 14-8 Di2510/Di3010/Di 3510 Job Separator JS-203 Specification Number of bins 1 Bin (considering the trays of the copier as 2 bins) Paper type Plain paper, recycle paper (56 g/m 2 to 90 g/ .
Appendix 14 Di2510/Di3010/Di35 10 14-9 14.2 Care of the Copier Cleaning Set the power switch of the copier to “O” before cleaning it. Housing cover § Clean the surface of the housing cover by wiping it with a soft cloth dampened with a mild household detergent.
14 Appendix 14-10 Di2510/Di3010/Di 3510 Original g lass 1 Clean the original glass by wiping it with a soft, dry cloth..
Appendix 14 Di2510/Di3010/Di35 10 14-11 14.3 Function Combination Table.
14 Appendix 14-12 Di2510/Di3010/Di 3510.
Appendix 14 Di2510/Di3010/Di35 10 14-13.
14 Appendix 14-14 Di2510/Di3010/Di 3510 Function co mbination co des Icon Descripti on The functions can be combined. — The functio ns cannot be combined. Later functions can not be set. The function set last has priority. No warning message will appear.
Appendix 14 Di2510/Di3010/Di35 10 14-15 This setting cannot be selected since the “Book” setti ng is selected. This setting cannot be selected since the “Book” setting cannot be se lected.
14 Appendix 14-16 Di2510/Di3010/Di 3510 14.4 Paper Size and Zoom Ratio Tables Paper Sizes Paper Format Metric S ize English Size A3 Wide 311 mm × 457 mm 12-1/4 in. × 18 in. A3 297 mm × 420 mm 11-3/4 in. × 16-1/2 in. A4 210 mm × 297 mm 8-1/4 in. × 11-3/4 in.
Appendix 14 Di2510/Di3010/Di35 10 14-17 Zoom Ratios Metric S izes Document Pape r Size De sired Paper Size Zoom Ratio A3 297 mm × 420 mm 11-3/4 in. × 1 6-1/2 in. A4 × 0.707 A5 × 0.500 B4 × 0.866 B5 × 0.610 A4 210 mm × 297 mm 8-1/4 in. × 11-3/4 in.
14 Appendix 14-18 Di2510/Di3010/Di 3510 B6 128 mm × 182 mm 5 in. × 7-1/4 in. A6 × 0.816 A4 × 1.640 A5 × 1.154 B4 × 2.000 B5 × 1.414 Metric Sizes Document Pape r Size Desired Paper Size Zoom Ratio English Sizes Document Pape r Size Desired Paper Size Zoom Ratio Ledger 11 in.
Appendix 14 Di2510/Di3010/Di35 10 14-19 Zoom ratio = Paper size/Document size 1 in. (inch) = 25.4 mm 1 mm = 0.0394 in. (inch) Invoice 5-1/2 in. × 8-1/2 in. 139.7 mm × 215.9 mm 11 in. × 17 in. × 2.000 11 in. × 14 in. × 1.647 Legal × 1.545 Foolsc ap × 1.
14 Appendix 14-20 Di2510/Di3010/Di 3510 14.5 Consumables In order to maintain the conditi on of this machine, the following consumables are needed. For best copy quality, we re commend that the specified supplie s be used. For information on or for purchasing suppli es, contact your nearest technical representative .
Appendix 14 Di2510/Di3010/Di35 10 14-21 Staple Cartridges MS-5D for the finisher Staples for staple binding 5,000 staples are provided in the staple cartridge. MS-2C for the saddle kit Staples for staple binding 2,000 staples are provided in the staple cartridge.
14 Appendix 14-22 Di2510/Di3010/Di 3510 14.6 Index Numerics 1st paper drawer .................. .............. .............. ......................... ........ 1-12 1st paper output tray ..................... .............. .............. ...........
Appendix 14 Di2510/Di3010/Di35 10 14-23 C Care of the copier .................. .............. ......................... ............ ......... 14-9 Checking the settings ..................... .............. .............. .............. ........... 4-3 Clearing jammed stap les .
14 Appendix 14-24 Di2510/Di3010/Di 3510 Document output tray .................... ......................... .............. ........... .. 1-14 Document pad ................. ........... .............. .............. .............. ............. 1-12 Document scales .
Appendix 14 Di2510/Di3010/Di35 10 14-25 I ID key ................... .............. .......................... .............. ....................... 7-19 Image repeat ................. .............. .............. .............. ....................
14 Appendix 14-26 Di2510/Di3010/Di 3510 Mixed original dete ction ................ .............. .............. ........... ...... 7-7 , 10-6 Mixed width document sizes .................... .............. .............. .... 10-2 , 14-3 Multiple bypass tray .
Appendix 14 Di2510/Di3010/Di35 10 14-27 mail bin kit ................... .............. ........... .............. .............. .......... 12-24 multiple bypass tray .................. ........... .............. .............. .......... 12-18 saddle kit .
14 Appendix 14-28 Di2510/Di3010/Di 3510 Selected settings .................. ......................... .............. .............. ........ 4-19 Separate scan ................... .............. .......................... .............. .......... 6-20 Shift grouping .
Appendix 14 Di2510/Di3010/Di35 10 14-29 X X/Y zoom setting ........... .............. ......................... .............. ............. 11-17 Z Zoom ratios ....................... .............. .............. ......................... ..........
14 Appendix 14-30 Di2510/Di3010/Di 3510.
Ein wichtiger Punkt beim Kauf des Geräts Konica Minolta Di3010 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Konica Minolta Di3010 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Konica Minolta Di3010 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Konica Minolta Di3010 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Konica Minolta Di3010 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Konica Minolta Di3010 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Konica Minolta Di3010 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Konica Minolta Di3010. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Konica Minolta Di3010 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
