Benutzeranleitung / Produktwartung I2360SHU des Produzenten AOC
Zur Seite of 66
(LED Backlight) 60S / 60P.
2 Safety ........................................................................................................................................................................ 4 National Conventions ..................................................
3 W E EE Declaration for India ............................................................................................................................. 59 EP A En ergy Star .........................................................................
4 Safe ty National Con v entions The following subsections describe notational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
5 Power The monitor should be operated only from the type of power source indica t ed on the label. If y ou are not sure of the type of power supplied to your home, consult your dealer or local pow er company . The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin.
6 Installation Do not place the mo nitor on an unstable cart, stand, tripod, br acket, or table. If the monitor falls, it can injure a person and cause serious damage to thi s product. Use only a cart, stand, tripod, bra cket, or table recommended by the manufacture r or sold with this product.
7 Cleaning Clean the cabinet regularly with cloth. Y ou can use soft - detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. W h en cleaning, make sure no detergent is leaked into the product. The cleaning cloth shou ld not be too rough as it will scratch the screen surface.
8 Other If the product is emitting a strange smell, sound or smoke, disconnect the pow er plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
9 S et up Contents in Box Not all signal cables (Analog , Audio, DVI,USB and HDM I cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
10 Setup Stand & Base Please setup or remove the base following the steps as below . 1>.Setup: Remove:.
11 2>.Setup: Remove:.
12 Adjusting Vie w i ng A ngle For optimal viewing it is recommended to look at the f ull face of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor w hen you change the monitor's angle.
13 2> Y ou are a bl e to adjust the monitor's angle from -5 ° to 22 ° . NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break t he LCD screen.
14 Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1. USB (Optional) 2. Power 3 HDMI (Optional) 4 .DVI (Optional) 5 . Analog (DB-15 VGA cable) 6. Line in (Optional) T o protect equipment, always turn of f the PC and LCD monitor before connecting.
15 W all Mou nt ing Preparing to Install An Option al Wall Mounting Arm. This monitor can be attached to a wall mounting arm you purchase separately . Disconnect power before this procedure. Follow these steps: 1 Remove the base. 2 Follow the manufacturer's instructions to assemble the w all mounting arm.
16 Adjusting Setting Optimal Resol ut ion Windows V ista For Windows Vista: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Personalization.
17 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to Optimal preset resolution.
18 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearance and Themes. 5 Double click DISPLA Y ..
19 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to Optimal preset resolution Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to Optimal preset resolution .
20 Hotkeys E2260P HU /E22 60S HU /E2460P WHU /E2460S WHU /E2460S HU /E2460P HU ： 1 Source/Auto/Exit 2 ECO(DCR /I -Care )/ < 3 Volume / > 4 Menu/Enter 5 Power E960S RDA / E960 P RDA /E2060S WDA.
21 E2060S W ： 1 Auto/Exit 2 ECO(DCR)/< 3 4:3 or Wide / > 4 Menu/Enter 5 Power Power Press the Power button to turn o n/ off the monitor . Eco (DCR /I -Care) / < Press the Eco key continuously to select the Eco mode of brightness and DCR /I -Care on when there is no OSD.
22 OSD Setting Basic and simple instruction on the control keys. 1) Press the MENU-button to activate the OSD window . 2) Press < or > to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it .
23 Luminance 1 Press (Menu) to display menu. 2 Press < or > to select (Luminance), and press to enter . 3 Press < or > to select submenu, and press to enter .
24 Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register. Eco mode Standard Standard Mode Text Text Mode Internet Internet Mode Game Game Mode Movie Movie Mode Sports Spo.
25 Image Setup 1 Press to display menu. 2 Press < or > to select (Image Setup), and press to enter . 3 Press < or > to select submenu, and p r ess to enter . 4 Press < or > to adju st. 5 Press to exit . Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise.
26 Color Setup 1 Press (Menu) to display menu. 2 Press < or > to select (Color Setup ), and press to enter . 3 Press < or > to select submenu, and p r ess to enter . 4 Press < or > to adjust. 5 Press to exit . Color setup. W a rm Recall Warm Color Temperature from EEPROM .
27 Picture Boost 1 Press (Menu) to display menu. 2 Press < or > to select (Picture Boost), and press to enter . 3 Press < or > to select submenu, and press to enter . 4 Press < or > to adjust. 5 Press to exit . Frame Size 14 -100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H.
28 OSD Setup 1 Press (Menu) to display menu. 2Press < or > to select (OSD Setup), and press to enter . 3 Press < or > to select submenu, and p r ess to enter . 4 Press < or > to adjust. 5 Press to exit . H.Position 0-100 Adjust the horizontal position of OSD V.
29 Extra 1 Press (Menu) to display menu. 2 Press < or > to select (Extra), and press to enter . 3 Press < or > to select submenu, and press to enter . 4 Press < or > t o adjust. 5 Press to exit . Input Select Auto / Analog / DVI / HDMI Select input s ig nal source.
30 Exit 1 Press (M enu) to display menu. 2 Press < or > to select (Exit), and press to enter . 3 Press to exit Exit Exit the main OSD.
31 LED Indicator Status LED Color Full Power Mode Green or Blue Active-off Mode Orange or red.
32 Driver Monitor Dri v er Windows 7 1. Start Windows® 7 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.
33 4.Ckick on the “ Change display settings ” button. 5. Click the “ Advanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button.
34 7. Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver ... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer" .
35 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X: Drivermo dule name (where X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button.
36 Windows V ista 1. Click "Start " and "Control Panel". T hen, double - click on "Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings.
37 4. Click "Properties" in th e "M onitor" tab. If the "Properties" button i s deactivated, it means the c onfigur ation for your monitor is completed. T he monitor can be used as is. If the message "Windows needs..
38 Windows XP 1. Start Windows® X P 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category „Appearance and T hemes‟ 4.
39 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button.
40 8. Select the 'Install from a list or specific location [advanced]' radio button and then c lick on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio butt on. Then click on the 'Nex t' button.
41 Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced.
42 i-Menu Welcome to “i - Menu” softw are by AOC. i -Menu makes it easy to adjust your monitor display setting by usi ng on screen menus instead of the OSD button on the monitor .
43 e-Saver W e lcome to use AOC e-Saver monitor power management softw are! The AOC e -Saver features Smart Shut down functions for your monitors, allow s your monitor to timely shutdow n when PC unit is at any s tatus (On, Off, Slee p or Screen Saver); the actual shutdown time depends on your preferences (see ex ample below).
44 Screen+ Welcome to "Screen+" softw are by AOC, Screen+ softw are is a desktop screen splitting tool, it splits the desktop into different panes, each pan e displays a different window . Y ou o nly need to drag the w indow to a corresponding pane, when you want to access it.
45 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the P ower Cord is properly connected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and power supply .
46 Monitor Is Stuck In Active Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly f itted in its slot. Make sure the monitor's video cable is properly connected to the computer . Inspect the monitor's video cable and make sure no pin is bent.
47 Specification General Specifi cation Panel Model name E960S RDA / E960P RDA Driving system TFT Color LCD Viewable Image Size 48. 2cm diagonal Pixel pitch 0.294mm(H)X0.294mm(V) Video R, G, B Analog lnterface & Digital Interface Separate Sync. H/V TTL Display Color 16.
48 Panel Model name E2060S WDA / E2060P WDA /E2060S W /E2060S WD Driving system TFT Color LCD Viewable Image Size 49.5cm diagonal Pixel pitch 0.27mm(H)X0.27mm(V) Video (E2060S WDA / E2060P WDA /E2060S WD ) R, G, B Analog lnterface & Digital Interface Video (E2060S W ) R, G, B Analog lnterface Separate Sync.
49 Panel Model name E2260P HU /E2260S HU /E2260P DA /E2260S DA /E2260S D Driving system TFT Color LCD Viewable Image Size 55.86 cm diagonal Pixel pitch 0.
50 Panel Model name E2460P W HU / E2460S W HU Driving system TFT Color LCD Viewable Image Size 59.8 cm diagonal Pixel pitch 0. 2715 mm(H) x 0. 2715 mm(V) Video R, G, B Analog lnterface & Digital Interface & HDMI lnterface Separate Sync H/V TTL Display Color 16.
51 Panel Model name E2460S HU / E2460P HU Driving system TFT Color LCD Viewable Image Size 61.0 cm diagonal Pixel pitch 0. 27675 mm(H) x 0. 27675 mm(V) Video R, G, B Analog lnterface & Digital Interface & HDM I lnterface Separate Sync H/V TT L Display Color 16.
52 Preset Displa y Modes 19 R ST AND A RD RESOLUTION HORIZONT A L FREQUENCY(kHZ) VERTIC A L FREQUENCY(Hz ) VGA 640× 480@ 60Hz 31.469 59.940 VGA 640× 480@ 67Hz 35.000 66.667 VGA 640× 480@ 72Hz 37.861 72.809 VGA 640× 480@ 75Hz 37.500 75.000 Dos-mode 720× 400@ 70Hz 31.
53 22w ST AND A RD RESOLUTION HORIZONT A L FREQUENCY(kHZ) VERTIC A L FREQUENCY(Hz ) VGA 640× 480@ 60Hz 31.469 59.940 VGA 640× 480@ 72Hz 37.861 72.809 VGA 640× 480@ 75Hz 37.500 75.000 SVGA 800× 600@ 56Hz 35.156 56.250 SVGA 800× 600@ 60Hz 37.879 60.
54 23.6w ST ANDARD RESOLUTION HORIZONT AL FREQUENCY(kHZ) VERTICAL FREQUENCY(Hz) VGA 640× 480 @60Hz 31.469 59.940 VGA 640× 480 @67Hz 35.000 66.667 VGA 640× 480 @72Hz 37.861 72.809 VGA 640× 480 @75Hz 37.500 75.000 Dos-mode 720× 400 @70Hz 31.469 70.
55 24w ST AND RESOLUTIO N Horizontal V ertical VGA 640× 480@ 60Hz 31.469 59.94 640× 480@ 72Hz 37.861 72.809 640× 480@ 75Hz 37.5 75 SVGA 800× 600@ 56Hz 35.156 56.25 800× 600@ 60Hz 37.879 60.317 800× 600@ 72Hz 48.077 72.188 800× 600@ 75Hz 46.875 75 XGA 1024× 768 @60Hz 48.
56 Pin A ssignments Pin Number 15 -Pin Side of the Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue s N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.
57 Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2+ 9 TMDS Data 0 17 DDC/CEC Ground 2 TMDS Data 2 Shield 10 TMDS Clock + 18 +5V Power 3 TMDS Data 2 11 TMDS Clock Shield 19 Hot Plug Detect 4 TMDS Data 1+ 12 TMDS Clock 5 TMDS Data 1Shield 13 CEC 6 TMDS Data 1 14 Reserved (N.
58 Regulation FCC Notice FCC Class B Radio Frequency Interference State m ent W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested an d found to comp ly w ith the limits for a Clas s B digital device, p ursuant to Part 15 of the FCC Rules.
59 WEEE Declaration Disposal of Was te Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disp osed of with your other ho usehold waste.
60 EP A E nergy Star ENERGY ST AR® is a U.S. registered mark. As an ENERGY ST AR® Partner , AOC Int ernational (Europe) BV and Envision Peripherals, Inc. have determined that this product meets the ENERGY ST AR® guidelin e s for energy efficiency .
61 EPE A T Decl aration EPEA T is a system to help purchasers in the public and priva te sectors e valuate, compare and select desktop computers, notebooks and monitors based on their environmental attributes.
62 Service EU W ARRANTY FOR AOC MONITORS LIMITED THREE-YEAR W ARRANTY* For AOC LCD M onitors sold within Europe, AOC Inter national (Europe) B.V . warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date o f consumer purchase.
63 MERCHANT A BILITY AND FITNESS F OR A P ARTICULAR PURPOSE) ARE LI M ITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P ART S AND LABOR FROM THE ORIGINAL DA TE OF CONSUMER PURCHASE. NO WARRANT IES (EITHER EXPRESSED OR IM PLIED) APPL Y AFTER THIS PERIO D.
64 W arranty Statement for North & South A merica (excluding Brazil) WARR ANTY ST A TEMENT for AOC Color M onitors Including those Sold within North Am erica as Specified Envision Peripherals, Inc.
65 MERCHANT A BILITY AND FITNESS F OR A P ARTICULAR PURPOSE) ARE LI M ITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P ART S AND LABOR AND ONE (1) YEAR FOR CR T T UBE OR LCD P ANEL FROM T HE ORIGINAL DA TE OF CONSUMER PURCHASE. NO WARRANT IES (EITHER EXPRESSED OR IMPLIED) APPL Y AFTER THIS PERIOD.
66 TCO DOCUMENT (FOR TCO CERTIFIED MODELS).
Ein wichtiger Punkt beim Kauf des Geräts AOC I2360SHU (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AOC I2360SHU noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AOC I2360SHU - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AOC I2360SHU reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AOC I2360SHU erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AOC I2360SHU besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AOC I2360SHU verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AOC I2360SHU. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AOC I2360SHU gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
