Benutzeranleitung / Produktwartung G2770PF des Produzenten AOC
Zur Seite of 75
E2770S D /E2770S HE /E2770P QU Q2770P QU G2770P QU M2770V/ M28 70V/M2870V HE / M2870V Q I2770V/I2770V HE (LED Backlight).
2 Safety ........................................................................................................................................................................ 4 National Conventions ..................................................
3 Regulation ............................................................................................................................................................... 65 FCC Notice ................................................................
4 Safe ty National Con ventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warn ings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold ty pe or in italic type.
5 Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local pow er company . The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin.
6 Installation Do not place the mo nitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to thi s product. Use only a cart, stand, tripod, bracket, or ta ble recommended by the manufacturer or sold with this product.
7 Cleaning Clean the cabinet regularly with cloth. Y ou can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. W hen cleani ng, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
8 Other If the product is emitting a strange smell, sound or smoke, disconnect the pow er plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
9 Setup Content of the Box Not all signal cables (Anal og , Audio , DVI , USB , DP , MHLand HDMI cables) will be prov ided for all countries and regions.
10 Setup Stand Please setup or remove the Stand following the steps as below . 70S /70V Setup Remove: 70P Setup: Remove:.
11 Adjusting Viewing Angle For optimal viewing it is recommended to look at the f ull face of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor w hen you change the monitor's angle.
12 Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1. E2770SD/M2770V/M2870V/I2770V 2. E2770SHE.
13 3 .E2770PQU 4 .Q2770PQU/G2770PQU 5. M2870VHE / I2770VHE 6. M2870VQ 1. Power 2. Analog (D-Sub 15-Pin VGA cable) 3. DVI 4. HDMI 5. Audio in 6. Earphone out 7. Display port 8. HDMI/M HL 9. USB input 10. USB 2.0x2 11. USB 3.0 12. USB 3.0+ fast charging 13.
14 3. (Optional – Requires a video card with DVI port)Connect one end of the DVI cable to the back of the monit or and connect the other end to the computer’s DVI port. 4. (Optional – Requires a video card with HDMI port) - Connect one end of the HDMI cable to the back of the monitor and connect the other end to the computer’s HDM I port.
15 W all Mounti ng Preparing to Install An Optional Wall Mounting Arm. 70S /70V 70P This monitor can be attached to a wall mounting arm you purchase separately . Disconnect power before this procedure. Follow these steps: 1. Remove the base. 2. Follow the manufacturer's instructions to assemble the wall mounting arm.
16 Adjusting Setting Optimal Resol ution Windows V ista For Windows Vista: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Personalization.
17 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to Optimal preset resolution.
18 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearance and Themes. 5 Double click DISPLA Y ..
19 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to Optimal preset resolution Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS.
20 Windows 8 For Windows 8: 1. Right click and click All apps at the bottom-right of the screen. 2. Set the “ View by ” to “ Category ”. 3. Click Appearance and Personalization.
21 4. Click DISPLAY. 5. Set the resolution SLIDE-BAR to Optimal preset resolution..
22 Hotkeys E2770SD/M2770V/M2870V/I2770V 1 Source/Auto/Exit 2 Clear Vision/- 3 4:3 or Wide/+ 4 Menu/Enter 5 Power E2770SHE/ E2770PQU/Q2770PQU/G2770PQU /M2870VQ/M2870VHE/I2770VHE 1 Source/Auto/Exit 2 Cl.
23 Clear Vision 1. W hen there is no OSD, Pre ss the “ - ” button to activate Clear Vision. 2. Use the “ - ” or “ + ” buttons to select between weak, medium, strong, or of f settings.
24 Using "MHL(Mobile Hi gh-Definit ion Link)" （ Optional ） 1."MHL" (Mobile High-Definition Link) This feature allows you to enjoy videos and photos (imported from a connected mobile dev ice that supports MHL) on the screenof the product.
25 OSD Setting Basic and simple instruction on the control key s. 1. Press the MENU-button to activate the OSD window . 2. Press - or + to navigate through the functions. Once the desir ed function is highlighted, press the MENU-button to activate. Press - or + to navigate through the sub-menu.
26 Luminance 1 Press (Menu) to display menu. 2 Press - or + to select (L uminance), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Brightness 0-100 Backlight Adjustment. Contrast 0-100 Contrast from Digital-register.
27 Image Setup 1 Press (Menu) to display menu. 2 Press - or + to select (Image Setu p), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise.
28 Color Setup 1 Press (Menu) to display menu. 2 Press - or + to select (Col or Setup), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Color Temp. W arm Recall Warm Color Temperature from EEPROM .
29 Picture Boost 1 Press (Menu) to display menu. 2 Press - or + to select (Pi cture Boost), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Frame Size 14 -100 Adjust Frame Size. Brightness 0-100 Adjust Frame Brightness.
30 OSD Setup 1 Press (Menu) to display menu. 2 Press - or + to select (OSD Setu p), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . H. Position 0-100 Adjust the horizontal position of OSD.
31 Extra 1 Press (Menu) to display menu. 2 Press - or + to select (Extra), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Input Select Auto / Analog / DVI / HDM I(MHL) /DP Select input signal source.
32 Exit 1 Press (Menu) to display menu. 2 Press - or + to select (Exit), and p ress to e nter . 3 Press to exit . Exit Exit the main OSD..
33 LED Indicator Status LED Color Full Power Mode Green or Blue Active-off Mode Orange or red.
34 Driver Monitor Dri ver Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced.
35 Windows XP 1. Start Windows® X P 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category ‘Appearance and T hemes’ 4.
36 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button.
37 8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio butt on. Then click on the 'Nex t' button.
38 Windows V ista 1. Click "Start " and "Control Panel". T hen, double -click on "Appearance and Personalizati on". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings.
39 4. Click "Properties" in the "M onitor" t ab. If the "Properties" button is deactivated, it m eans th e configuration for your monitor is completed. T he monitor can be used as is. If the message "Windows needs...
40 Windows 7 1. Start Windows® 7 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.
41 4.Ckick on the “ Change display settings ” button. 5. Click the “ Advanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button.
42 7. Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver ... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer" .
43 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X: Drivermo dule name (w here X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button.
44 Windows 8 1. Start Windows® 8 2. Right click and click All apps at the bottom-right of the screen. 3. Click on the “ Control panel ” icon 4. Set the “ V iew by ” to “Large icons” or “Small icons” . 5. Click on the “ Display ” icon.
45 6. Click on the “Change display settings” button. 7. Click the “ Advanced Settings” button . 8. Click the “Monitor” tab and then click the “Properties” button .
46 9. Click the “Driver” tab. 10. Open the “ Update Driver Software-Gene ric PnP Monitor ” window by clicking on “Update Driver ... “ and then click the "Browse m y computer for driver software" button. 11. Select "Let me pick from a list of device drivers on m y computer" .
47 12. Click the “Have Dis k” button. Click on the “Browse” button and navigate to the follow ing directory: X: Drivermo dule name (where X is the drive letter designator for the CD-ROM drive). 13. Select the "xxx.inf" file and click the “ Open” button.
48 i-Menu Welcome to “i - Menu” softw are by AOC. i -Menu makes it easy to adjust your monitor display setting by usi ng on screen menus instead of the OSD button on the monitor .
49 e-Saver W elcome to use AOC e-Saver monitor pow er management software! The AOC e -Saver features Smart Shutdown functions for your monitors, allow s your monitor to timely shu tdown w hen PC uni t is at any status (On, O ff, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see ex ample below).
50 Scr een+ Welcome to "Screen+" softw are by AOC, Screen+ softw are is a desktop screen splitting tool, it splits the desktop into different panes, each pan e displays a different w indow . Y ou only need to drag the window to a corresponding pane, when you want to access it.
51 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON a nd the Pow er Cord is pr operly connected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and power supply .
52 Monitor Is Stuck In Active Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly f itted in its slot. Make sure the monitor's video cable is properly connected to the computer . Inspect the monitor's video cable and make sure no pin is ben t.
53 Specification General Specifi cation Panel Product name E2770SD/E2770SHE/M2770V/I2770V/I2770VHE Driving system TFT Color LCD Viewable Image Size 68.6cm diagonal Pixel pitch 0.31 14mm(H)X0.31 14mm(V) Video R, G, B An alog lnterface & Digital Interface Separate Sync.
54 Panel Product name E2770PQU Driving system TFT Color LCD Viewable Image Size 68.6cm diagonal Pixel pitch 0.31 14mm(H)X0.31 14mm(V) Video R, G, B An alog lnterface & Digital Interface Separate Sync. H/V TT L Display Color 16.7M Colors Dot Clock 148.
55 Panel Model name Q2770PQU Driving system TFT Color LCD Viewable Image Size 68. 6cm diagonal Pixel pitch 0.233mm(H)X0.233mm(V) Video R, G, B An alog lnterface & Digital Interface Separate Sync.
56 Panel Model name G2770PQU Driving system TFT Color LCD Viewable Image Size 68.6cm diagonal Pixel pitch 0.311mm(H)X0.311mm(V) Video R, G, B Analog lnterface & Digital Interface Separate Sync.
57 Panel Model name M2870V/ M2870VQ/M2870VHE Driving system TFT Color LCD Viewable Image Size 71.1cm diagonal Pixel pitch 0.32mm(H)X0.32mm(V) Video R, G, B An alog lnterface & Digital Interface Separate Sync. H/V TT L Display Color 16.7M Colors Dot Clock 148.
58 Preset Displa y Modes E2770SD/E2770SHE/E2770PQU/M2770V/M2870V/ I2770V/I2770VHE/M2870VHE/M2870VQ Standard Resolution H. Frequency (kHz) V . Frequency (Hz) VGA 640 X 480@60Hz 31.469 59.94 MAC MODE 640 X 480@67Hz 35 66.667 VGA 640 X 480@72Hz 37.861 72.
59 Q2770PQU Standard Resolution H. Frequency (kHz) V . Frequency (Hz) VGA 640 X 480@60Hz 31.469 59.94 MAC MODE 640 X 480@67Hz 35 66.667 VGA 640 X 480@72Hz 37.861 72.809 VGA 640 X 480@75Hz 37.5 75 IBM MODE 720 X 400@70Hz 31.469 70.087 SVGA 800 X 600@56Hz 35.
60 G2770PQU Standard Resolution H. Frequency (kHz) V. Frequency (Hz ) VGA 640x480@60Hz 31.469 59.94 640x480@72Hz 37.861 72.809 640x480@75Hz 37.5 75 SVGA 800x600@56Hz 35.156 56.25 800x600@60Hz 37.879 60.317 800x600@72Hz 48.077 72.188 800x600@75Hz 46.875 75 800x600@100Hz 46.
61 720P 1280 X 720 HD 50Hz,60Hz 1080P 1920 X 1080 HD 30Hz,50Hz,60Hz.
62 Pin A s sign ments 15 -Pin Color Display Signal Cable Pin N o. Signal Name Pin N o. Signal Name 1 Video-Red 9 +5V 2 Video-Green 10 Ground 3 Video-Blue 11 N.
63 19 -Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2+ 9 TMDS Data 0 17 DDC/CEC Ground 2 TMDS Data 2 Shield 10 TMDS Clock + 18 +5V Power 3 TMDS Data 2 11 TMDS Clock Shield 19 Hot Plug Detect 4 TMDS Data 1+ 12 TMDS Clock 5 TMDS Data 1Shield 13 CEC 6 TMDS Data 1 14 Reserved (N.
64 Plug and Pla y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.
65 Re gulatio n FCC Notice FCC Class B Radio Frequency Interference State ment W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested an d found to co mply w ith the limits for a Cl ass B digital devi ce, pursuant to Part 15 of the FCC Rules.
66 WEEE Declaration （ Optiona l ） Disposal of Was te Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disp osed of with you r o ther household waste.
67 EPE A T Decl aration （ Optional ） EPEA T is a system to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes.
68 TCO DOCUMENT (FOR TCO CERTIFIED MODELS).
69 W arrant y Statement for Euro pe LIMITED THREE-YEAR W ARRANTY* For AOC LCD M onitors sold within Europe, AOC International (Europe) B.V . warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase.
70 cost of service, including parts, labor , shipping (if any) and applicable taxes. AOC Certified or Authorized Service Center will provide you with an estimate of service costs before receiving your authorization to perform service.
71 W arrant y Statement for Middle East and A f r ica (ME A) And The Commonwealt h of Independent St ates (CIS) LIMITED ONE to THREE YEA RS W ARRANTY* For AOC LCD M onitors sold within the Middle East and Africa (MEA) and th e Commonwealth of Independent States (CIS), AOC Internat ional (Europe) B.
72 Repair , modification, or inst allation of options or parts by anyone other than an AOC Certified or Authorized Service Center Improper environments like humidity , water dama ge and dusts .
73 AOC Pixel Policy ISO 9241 -307 Class 1.
74 W arrant y Statement for North & South A merica (excl uding Brazil) WARR ANTY ST A TEMENT for AOC Color M onitors Including those Sold within North America as Specified Envision Peripherals, Inc.
75 ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANT IES OF MERCHANT ABIL ITY AND FI TNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM T HE ORIGINAL DA TE OF CONSUMER PURCHASE.
Ein wichtiger Punkt beim Kauf des Geräts AOC G2770PF (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AOC G2770PF noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AOC G2770PF - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AOC G2770PF reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AOC G2770PF erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AOC G2770PF besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AOC G2770PF verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AOC G2770PF. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AOC G2770PF gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
