Benutzeranleitung / Produktwartung E2350SD des Produzenten AOC
Zur Seite of 65
50S (LED Backlight).
2 Safety ........................................................................................................................................................................ 4 National Conventions ..................................................
3 e2250Sda/ e2250Sd/ e2250Sh ................................................................................................................. 50 e2350Sa/ e2350Sda / e2350Sd/ e2350Sh / e2350Shk .........................................................
4 Safe ty National Con ventions The following subsections describe notational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold ty pe or in italic type.
5 Power The monitor should be operated only from the ty pe of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local pow er company . The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin.
6 Installation Do not place the mo nitor on an unstable cart, stand, tripod, br acket, or ta ble . If t he monitor falls, it can injur e a person and cause serious damage to thi s product. Use only a cart, s tand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
7 Cleaning Clean the cabinet regularly with cloth. Y ou can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. W hen c leaning, make sure no detergent is leaked into the pro duct. The cleaning cloth should not be too rough as it will scratch the screen surface.
8 Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
9 Setup Contents in Box Not all signal cables (Analog , Aud io, DVI, and HDMI cables) w ill be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
10 Setup Stand & Base Please setup or remove the base following the steps as below . Setup: Remove:.
11 Adjusting Vie w ing Angle For optimal viewing it is recommended to look at the f ull face of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor w hen you change the monitor's angle.
12 Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1. AC port 2. VGA 3. DVI (available for selected models ) 4. HDMI(available for selected models) 5. Audio(available for selected models) T o protect equipment, always turn off the PC and LCD monitor before connecting.
13 Adjusting Setting Optimal Resol ution Windows V ista For Windows Vista: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Personalization.
14 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to Optimal preset resolution ..
15 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearance and Themes. 5 Double click DISPLA Y ..
16 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to Optimal preset resolution. Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to Optimal preset resolution .
17 Hotkeys 1 ECO / DCR / V olum e - 2 4:3 / wide / V olum e + 3 Source / Auto / Exit 4 Menu / Enter 5 Power Power Press the Power button to turn on/ off the monitor . Eco (DCR)/ - Press the Eco key continuously to select the Eco mode of brightness and DCR on w hen there is no OSD.
18 OSD Setting Basic and simple instruction on the control key s. 1) Press the MENU-button to activate the OSD window. 2) Press - or + to navigate through the fu nctions. Once the desired function is highlighted, press the MENU-button to activate it .
19 Luminance 1 Press (Menu) to display menu. 2 Press o r to s elect ( Luminance), and press to enter . 3 Press o r to s elect submenu, and press to enter .
20 Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register. Eco mode Standard Standard Mode Text Text Mode Internet Internet Mode Game Game Mode Movie Movie Mode Sports Spo.
21 Image Setup 1 Press (Menu) to display menu. 2 Press o r to s elect ( Image Setup), and press to enter . 3 Press o r to s elect submenu, and press to enter . 4 Press o r to a djust. 5 Press to exit . Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise.
22 Color Setup 1 Press (Menu) to display menu. 2 Press o r to s elect ( Color Setup), and press to enter . 3 Press o r to s elect submenu, and press to enter . 4 Press o r to a djust. 5 Press to exit . Color setup. W arm Recall Warm Color Temperature from EEPROM .
23 Picture Boost 1 Press (Menu) to display menu. 2 Press o r to s elect ( Picture Boost), and press to enter . 3 Press o r to s elect submenu, and press to enter . 4 Press o r to a djust. 5 Press to exit . Frame Size 14 -100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H.
24 OSD Setup 1 Press (Menu) to display menu. 2 Press o r to s elect ( OSD Setup), and press to enter . 3 Press o r to s elect submenu, and press to enter . 4 Press o r to a djust. 5 Press to exit . H.Position 0-100 Adjust the horizontal position of OSD V.
25 Extra 1 Press (Menu) to display menu. 2 Press o r to s elect ( Extra), and press to enter . 3 Press o r to s elect submenu, and press to enter . 4 Press o r to a djust.
26 Exit 1 Press (Menu) to display menu. 2 Press o r to s elect ( Exit), and press to enter . 3 Press to exit Exit Exit the main OSD.
27 LED Indicator Status LED Color Full Power Mode Green or Blue Active-off Mode Orange or red.
28 Driver Monitor Dri ver Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced.
29 Windows XP 1. Start Windows® X P 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category ‘Appearance and Themes’ 4.
30 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' butto n.
31 8. Select the 'Install from a list or specific location [advanced]' radio button and then cl ick on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio butt on. Then click on the 'Nex t' button.
32 Windows V ista 1. Click "Start " and "Control Panel". T hen, double -click on "Appearance and Personalizatio n". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings.
33 4. Click "Properties" in th e "M onitor" tab. If the "Properties" button i s deactivated, it means the configuration for your monitor is completed. T he monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , click "Continue".
34 Windows 7 1. Start Windows® 7 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.
35 4.Ckick on the “ Change display settings ” button. 5. Click the “ Advanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button.
36 7. Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver ... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer" .
37 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X: Drivermo dule name (where X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button.
38 Windows 8 1. Start Windows® 8 2. Right click and click All apps at the bottom-right of the screen. 3. Set the “ V iew by ” to “Large icons” or “Small icons” . 4. Click on the “ Display ” icon. 5. Click on the “Change display settings” button.
39 i-Menu Welcome to “i - Menu” softw are by AOC. i -Menu makes it easy to adjust your monitor display setting by usi ng on screen menus instead of the OSD button on the monitor .
40 e-Saver W elcome to use AOC e-Saver monitor pow er management software! The AOC e -Saver features Smart Shutdown functions for your monitors, allow s your monitor to timely shutdow n when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see ex ample below).
41.
42 Scr een+ Welcome to "Screen+" softw are by AOC, Screen+ softw are is a desktop screen splitting tool, it splits the desktop into different panes, each pan e displays a different w indo w . Y ou only need to drag the window to a corresponding pane, when you want to access it.
43 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the P ower Cord is properly connected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and power supply .
44 Picture Bounces, Flickers Or W ave Pattern Appears In The Picture Move electrical devices that may cause electrical interference as far away from the monitor as possible. Use the maximum refresh rate your monitor is capable of at the resolution your are using.
45 Specification General Specifi cation N950Sw/e950Swda / e9 50Swda k/ e950Swa/ e950Sw/ e950Swn/ E950S WDAN Panel Model name N950Sw(CCFL)/e950Swda / e950Swda k/ e950Swa/ e950Sw/ e950Swn/ E950S WDAN Driving system TFT Color LCD Viewable Image Size 47 cm diagonal Pixel pitch 0.
46 Environmental Temperature: Operating 0° to 40° Non-Operating - 25° to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) e950S /e950Sn/e950Snk Panel Model name e950S /e950Sn/e950Snk Driving system TFT Color LCD Viewable Image Size 48.
47 E2050S W /E2050S WD / E2050S WDA Panel Model name E2050S W /E2050S WD /E2050S WDA Driving system TFT Color LCD Viewable Image Size 49.5cm diagonal Pixel pitch 0.27 mm(H)X0. 27 mm(V) Video R, G, B Analog lnterface （ E2050S W ） Video R, G, B Analog lnterface & Digital Interface Separate Sync.
48 e2050Sn / e2050Snk/ e2050Sa / e2050S/ e2050Sda/ e2050Sd/ e2050Sdan Panel Model name e2050Sn / e2050Sn k/ e2050Sa / e2050S/ e2050Sda/ e2050Sd/ e2050Sdan Driving system TFT Color LCD Viewable Image Size 50.
49 e2250Swn / e2250Swnk/ e2250Swdn / e2250Swdnk/ e2250Swh/ e2250Swda / e2250Swda k/ e2250Swd/ e2250Swa/ e2250Sw/ E2250SWVD Panel Model name e2250Swn / e2250Swn k/ e2250Swdn / e2250Swdn k/ e2250Swh/ e2250Swda / e2250Swda k/ e2250Swd/ e2250Swa/ e2250Sw/ E2250SWVD Driving system TFT Color LCD Viewable Image Size 54.
50 Environmental Temperature: Operating 0° to 40° Non-Operating - 25° to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) e2250Sda/ e2250Sd/ e2250Sh Panel Model name e2250Sda / e2250Sd / e2250Sh Driving system TFT Color LCD Viewable Image Size 55.
51 Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) e2350Sa/ e2350Sda / e2350Sd/ e2350Sh / e2350Shk Panel Model name e2350Sa/ e2350Sda / e2350Sd/ e2350Sh / e2350Shk Driving system TFT Color LCD Viewable Image Size 58.42cm diagonal Pixel pitch 0.
52 Environmental Operating 0° to 40° Non-Operating - 25° to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) e2450Swda / e2450Swda k/ e2450Swd/ e2450Swh / e2450Swhk Panel Model name e2450Swda / e2450Swda k/ e2450Swd/ e2450Swh / e2450Swhk Driving system TFT Color LCD Viewable Image Size 59.
53 Non-Operating - 25° to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) Preset Displa y Modes STAND RESOLUTION HORIZONTAL FREQUENC Y (KHz) VERTICAL FREQUENC Y (Hz) Panel Siz e 18.5" 19" 19.5" 20" 21.
54 Pin A s sign ments Pin Number 15 -Pin Side of the Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.
55 Pin N o. Signal Name Pin N o. Signal Name Pin N o. Signal Name 1 TMDS Data 2+ 9 TMDS Data 0 17 DDC/CEC Ground 2 TMDS Data 2 Shield 10 TMDS Clock + 18 +5V Power 3 TMDS Data 2 11 TMDS Clock Shield 19 Hot Plug Detect 4 TMDS Data 1+ 12 TMDS Clock 5 TMDS Data 1Shield 13 CEC 6 TMDS Data 1 14 Reserved (N.
56 Plug and Pla y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC ST ANDARD. It all ows the monitor to inform the host system of its identity and, depending on the level of DDC used, c ommunicate additional information about its display capabilities.
57 Regulation FCC Notice FCC Class B Radio Frequency Interference State ment W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
58 WEEE Declaration Disposal of Was te Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.
59 EP A Energ y Star ENERGY ST AR® is a U.S. registered mark. As an ENERGY ST AR® Partner , AOC International (Europe) BV and Envision Peripherals, Inc.
60 EPE A T Decl aration EPEA T is a system to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes.
61 TCO DOCUMENT （ Optional ）.
62 Service W arrant y Statement for E urope LIMITED T HREE-YEAR WARRANTY * AOC Color Monitors sold within Europe AOC International (Europe) BV warrants this product to be free from defects in material and w orkmanship for a period of Three (3) years after the original date of consumer purchase.
63 modified or altered; you bear the sole responsibility and liability for any such modification or alteration. ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING T HE WARRANT IES OF MERCH.
64 W arrant y Statement for North & South A merica (excl uding Brazil) WARR ANTY ST A TEMENT for AOC Color M onitors Including those Sold within North America as Specified Envision Peripherals, Inc.
65 ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING T HE WARRANT IES OF MERCHANT ABILITY AND FI TNESS FOR A P ARTICULAR PURPOSE) ARE LI MITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P ART S AND LABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM T HE ORIGINAL DA TE OF CONSUMER PURCHASE.
Ein wichtiger Punkt beim Kauf des Geräts AOC E2350SD (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AOC E2350SD noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AOC E2350SD - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AOC E2350SD reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AOC E2350SD erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AOC E2350SD besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AOC E2350SD verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AOC E2350SD. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AOC E2350SD gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
