Benutzeranleitung / Produktwartung KRF-V8070D des Produzenten Kenwood
Zur Seite of 48
ESP AÑOL IT ALIANO DEUTSCH FRANÇAIS ENGLISH About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components.
2 EN ENGLISH Units are designed for operation as follows. U.S.A. and Canada ........................................... AC 120 V only Australia ........................................................... AC 240 V only Europe and U.K. .................
3 EN ENGLISH Basic remote control operations for other components ....................................................... 36 Registering setup codes for other components ..................................................... 36 Searching for your code .
4 EN ENGLISH Preparing the remote control Loading the batteries 1 Remove the cover. 2 Insert the batteries. 3 Close the cover. • Insert two AA-size (R6) batteries as indicated by the polarity markings. Operation When the STANDBY indicator is lit, the power turns ON when you press the POWER RCVR key on the remote control.
5 EN ENGLISH Before applying the power Special features True home theater sound This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software.
6 EN ENGLISH L SL S SB SR CR SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs DSP MODE DTS MATRIX DISCRETE DOLBY DIGITAL PRO LOGIC STEREO LOUDNESS NEO:6 CS II AB CLIP AUTO DETECT AUTO RDS PTY MEMORY S.
7 EN ENGLISH Names and functions of parts Remote control unit This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s setup codes.
8 EN ENGLISH Make connections as shown in the following pages. When connecting the related system components, be sure to refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.
9 EN ENGLISH Setting up the system Connecting the terminals 1 Strip coating. 2 Loosen. 3 Insert. 4 Secure. 1 Strip coating. 2 Push the lever. 3 Insert the cord.
10 EN ENGLISH IN IN REC OUT PLAY IN GND CD/DVD MD/TAPE R L PHONO Connecting audio components Record player Setting up the system To AC wall outlet Cassette deck or MD recorder CD or DVD player SYSTEM CONTROL jacks ^ IN OUT OUT OUT Moving coil (MC) cartridge record player cannot be used directly from the receiver unit.
11 EN ENGLISH VIDEO 1 VIDEO 2 VIDEO 3 PLAY IN PLAY IN PLAY IN REC OUT S VIDEO S VIDEO OUT VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO DVD IN MONITOR OUT OUT VIDEO IN VIDEO IN VIDEO DVD IN.
12 EN ENGLISH COAXIAL OPTICAL OPTICAL VIDEO 3 CD/DVD DIGITAL IN DVD/ 6CH VIDEO 2 Digital connections The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals.
13 EN ENGLISH DVD IN VIDEO 3 IN MONITOR OUT CR CB Y CR CB Y CR IN CB IN Y IN CR OUT CB OUT Y OUT CR OUT CB OUT Y OUT COMPONENT VIDEO Setting up the system Connecting video components (COMPONENT VIDEO).
14 EN ENGLISH DVD/6CH INPUT FRONT SURROUND SUB WOOFER CENTER PLAY IN PLAY IN VIDEO 2 VIDEO 3 COAXIAL OPTICAL OPTICAL VIDEO 3 CD/DVD DVD/ 6CH VIDEO 2 DIGITAL IN OUT VIDEO IN VIDEO IN VIDEO DVD IN IN VI.
15 EN ENGLISH Right Front Speakers B Power amplifier Left Connecting the speakers Setting up the system Right Surround Back Powered subwoofer Left Center Speaker Right Left Front Speakers A Surround S.
16 EN ENGLISH FM 75 GND AM ANTENNA Connecting the antennas AM loop antenna The supplied loop antenna is for use indoors. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception. AM antenna terminal connections 1 Push lever.
17 EN ENGLISH Connecting the system control Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations.
18 EN ENGLISH Preparing for surround sound Speaker settings To enable you to obtain optimum enjoyment from the receiver’s listening modes, make sure to complete the speaker settings (subwoofer, front, center, and surround speakers) as described below.
19 EN ENGLISH # Press the ∧ key or # key again to accept the setting. • The subwoofer remix setting indication “SW RE-MIX” appears. $ Use the MULTI CONTROL knob or Multi ( % / fi ) keys to select the appropriate subwoofer re-mix setting. 1 SW RE-MIX ON : Subwoofer re-mix setting mode to the receiver is ON.
20 EN ENGLISH 2 Measure the distance from the listening position to each of the speakers. Jot down the distance to each of the speakers. Distance to Front left speaker (L) : ____ feet (meters) Distanc.
21 EN ENGLISH Preparing for playback Some preparatory steps are needed before starting playback. INPUT MODE MD/TAPE A SPEAKERS B ON/STANDBY POWER ON/OFF Turning on the receiver 1 Turn on the power to the related components. 2 Turn on the power to this receiver by pressing the POWER ON/OFF and ON/STANDBY key.
22 EN ENGLISH Normal playback Adjusting the sound Loudness Tone Bass Boost TONE VOLUME CONTROL MUTE A SPEAKERS B SPEAKER EQ ACTIVE EQ PHONES LOUDNESS MULTI CONTROL VOL / POWER RCVR Speaker EQ Active EQ Mute (Multi % / fi ) TUNER Adjusting the TONE You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode.
23 EN ENGLISH Normal playback Make sure the SPEAKERS indicators are turned off. SPEAKER EQ mode SPEAKER EQ function is to adjust the receiver’s audio output characteristics with the speakers’ characteristics which differs depending on the size of the speakers.
24 EN ENGLISH Recording audio (analog sources) MD/TAPE Recording a music source 1 Use the Input Selector keys to select the source (other than “MD/ TAPE”) you want to record. 2 Set the MD or TAPE recorder to record. 3 Start playback, then start recording.
25 EN ENGLISH Using RDS (Radio Data System) RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal.
26 EN ENGLISH Presetting radio stations manually The RDS auto memory function assigns preset numbers to RDS stations starting from preset number “1”. Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations.
27 EN ENGLISH Listening to radio broadcasts Using the RDS DISP (Display) key TUNER RDS Disp. Pressing the RDS Disp. key changes the contents of the display.
28 EN ENGLISH 3 Press the PTY key to start searching. EXAMPLE : Searching for a Pop Music broadcast. Display while searching. Blinks L SL S SB SR C R SW LFE SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ.
29 EN ENGLISH Ambience effects This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.
30 EN ENGLISH Ambience effects Dolby Digital The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from Dolby Digital program sources (such as Laserdisc or DVD software marked ).
31 EN ENGLISH Ambience effects DSP mode The DSP mode lets you add the atmosphere of a live concert or hall to almost any type of program source. These modes are particularly effective when used with stereo program sources, like CD, television, and FM radio.
32 EN ENGLISH Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC can be used when playing video, DVD, or LD software bearing the mark.
33 EN ENGLISH Ambience effects DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. Connecting a DVD player which can decode the surround signal itself is also acceptable.
34 EN ENGLISH Ambience effects Midnight mode (Dolby Digital mode only) When watching movies at night , you might not be able to raise the volume as loud as normal.
35 EN ENGLISH Ambience effects CS II Gain adjustment mode (CS II mode only) CS II GAIN allows user to adjust the input gain for the Circle Surround II processing. 1 Press the SOUND key, then press the ∧ / ∨ keys or @ / # keys until “CS II GAIN” appears on the display.
36 EN ENGLISH The remote control supplied with this receiver is also capable of controlling components from a variety of manufacturers once you register the appropriate setup codes into the remote control unit. Registering setup codes for other components 1 Find the setup code of the component to be registered.
37 EN ENGLISH Basic remote control operations for other components Operating other components This operation lets you operate the registered components. KENWOOD audio components with system control turn on and off automatically with the receiver via the system control connections.
38 EN ENGLISH Basic remote control operations for other components Setup code chart Maker Setup codes AGB 0516 ASA 0104, 0802 Acura 0009 Admiral 0163 Adyson 0217 Aiwa 0701, 0800 Akai 0208, 0516, 0602,.
39 EN ENGLISH Maker Setup codes Marantz 0037, 0556 Mark 0037 Matsui 0037, 0009, 0217, 0036, 0208, 0011, 0035, 0072, 0177, 0211, 0235, 0272, 0294, 0355, 0371, 0487, 0516 McMichael 0043 Mediator 0037, 0.
40 EN ENGLISH Maker Setup codes ABsat 0832, 0123 AST 0321, 0351 Akai 0515 Alba 0455, 0421, 0515, 0613 Aldes 0288 Amstrad 0847, 0252, 0345, 0501, 0675, 0689, 1113 Ankaro 0713, 0288, 0369 Anttron 0421 A.
41 EN ENGLISH Maker Setup codes Asa 0081 Aiwa 0348, 0352 Akai 0041, 0106, 0315 Alba 0315, 0352 Baird 0104, 0041 Blaupunkt 0195, 0226, 0162, 0034 Brandt 0320, 0321 Brandt Electronic 0041 Bush 0352 Comb.
42 EN ENGLISH Basic remote control operations for other components Setup code chart Maker Setup codes Afreey 0698 Aiwa 0641 Akai 0611 Alba 0717 Amoisonic 0764 Amstrad 0713 Apex Digital 0672 Bush 0516,.
43 EN ENGLISH Basic remote control operations for other components CASSETTE deck, CD player & MD recorder operations You can perform these basic operations using the keys described below when connected to KENWOOD cassette deck, CD player or MD recorder equipped with system control operations.
44 EN ENGLISH Basic remote control operations for other components Other components’ operations Refer to the following for the type of remote control operations available for each component. • When pressing keys in succession, press each key firmly and be sure to wait at least 1 second before pressing the next key.
45 EN ENGLISH Basic remote control operations for other components Satellite operation keys Cable operation keys DVD player operation keys Notes 1. Certain codes may only operate some of the function available on a given model. 2. The above show the typical type functions available for each component.
46 EN ENGLISH In case of difficulty Tuner Cause • No antenna is connected. • The broadcast band is not set properly. • The frequency of the desired station is not tuned. • Noise due to ignition noise from an automobile. • Noise due to interference from an electric appliance.
47 EN ENGLISH Remote control unit Cause • No setup codes registered for the respective input(s). • The remote control is set to a different operation mode. • Batteries are exhausted. • The remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle between the receiver and the remote.
48 EN ENGLISH Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Ein wichtiger Punkt beim Kauf des Geräts Kenwood KRF-V8070D (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood KRF-V8070D noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood KRF-V8070D - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood KRF-V8070D reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood KRF-V8070D erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood KRF-V8070D besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood KRF-V8070D verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood KRF-V8070D. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood KRF-V8070D gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
