Benutzeranleitung / Produktwartung KRC-677R des Produzenten Kenwood
Zur Seite of 40
KRC-677R KRC-577R © B64-1284-00 (EF) CASSETTE RECEIVER INSTR UCTION MANU AL.
— 2 — English Contents Before use Safety precautions ........................................................................3 Basic operations Power ............................................................................................5 Switching Modes .
— 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground cables, make sure to use automotive- grade cables or other cables with an area of 0.
— 4 — English • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer.
Switching Modes: Each time you press the SRC button, the mode switches as follows: • The mode switches to the next mode from any mode which cannot be used.
MENU button to enter the menu mode and then display the function to make the setting. Details on each setting are explained separately in the corresponding function page. Hold down the MENU button for one second or more. "MENU" is displayed when the menu mode is entered.
T uner f eatur es Memory Entry* 3 (A-Memory (start)) ➞ AF Function* 4 (AF ON / OFF) ➞ Region Restrict Function* 4 (REG ON / OFF) ➞ Auto TP Seek* 4 (ATPS ON / OFF) ➞ Monaural Reception* 5 (MONO.
With the local seek function turned on, auto seek tuning skips stations with relatively poor reception. Turning Local Seek Function On/Off: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button. Select the band/ station that you want to have stored. Hold down the button (#1-6) that you want to use for the station, for two seconds or more.
You can search for the preset station with Programme Service name. Press the DNPP button on the remote control. “SNP PLAY/SNPP” will be displayed once the seek mode is entered. The names of the stations preset in the band currently listened to are displayed for 5 seconds each.
When an emergency transmission (announcing disasters, etc.) is sent, all current functions are interrupted to allow the warning to be received. Alarm Stations that offer EON also transmit information about other RDS stations that have traffic information.
You can listen to traffic information. If you are listening to tapes or discs, they will continue playing until a traffic bulletin is broadcast. Turning TI function On/Off: Press the TI button to turn the function on and off. When the function is on, the TI indicator is turned on.
Switching settings Press either the AM button or FM button. The display and setting will change. If the traffic information station you are tuned to experiences poor reception, this function automatically seeks another TP station. Press the MENU button to end the menu mode.
( Speech .....1~9,16~23, 29, Music .....10~15, 24~28) News NEWS 1.News AFFAIRS 2.Current Affairs KRC-577R Programme type KRC-677R INFO 3.Information SPORT 4.Sport Sport EDUCATE 5.Education Educate DRAMA 6.Drama Drama CULTURE 7.Culture Culture SCIENCE 8.
To scroll manually: Press the DISP button to display the Radio Text. Holding down the DISP button for one second or more results in one scrolling display of the text. Manual/Automatic scroll switching: Hold down the MENU button for one second or more.
function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "NEWS OFF" or "NEWS ##M" in the display, indicating that the function is on or off, respectively.
Casset te pla yer f eat ur es Preset the volume level to be used for traffic information and news broadcasts. Tune into the station for which you want to set the volume. Adjust the volume to the desired level. Hold down the TI VOL ADJ button for two seconds or more.
Function of the KRC-677R Listen to tapes recorded using the Dolby B NR system. Turning Dolby NR On/Off: Press the B NR button to switch Dolby B NR on and off. The B NR indicator lights up when Dolby B NR is turned on. Using Dolby B Noise Reduction Fast Forwarding Tapes: Press the FM button.
Rewinds to the beginning of the current track (or fast forwards to the beginning of the next track), continuing tape playback. Rewinding tape to the beginning of current track: Press the 4 button, and the tape will rewind to the beginning of the current track and automatically start playing again.
Exter nal disc contr ol f eatur es Repeatedly plays the current track. Turning Music Repeat Function On/Off: Press the REP button to switch the music repeat function on and off. "REP ON" is displayed when music repeat is turned on. Cancelling Music Repeat Function: Press either the REP or PROG button.
Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 button. Release your finger to play the disc at the point. You cannot use reverse play between tracks depending on the model being connected.
Successively play the beginning of each track on a disc until you find the track that you want to listen to. Starting the Track Scan : Press the SCAN button. "T-SCN ON" is displayed and the first 10 seconds of each track are played, and the tracks are played in order.
The display of the track number changes continuously as the next track is being selected. When the track has been selected, play starts. The selected track number blinks in the display as it is being played.
The cursor blinks in the position where character input can be made. Press either the 4 or ¢ button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the ¢ button to the right. You can also move the cursor left or right by pressing the TRACK + or TRACK – buttons, respectively, on the remote control.
made by the unit that is playing. • Discs in the disc changer that have never been played before will appear as "NO ACCES" when the disc names are displayed.
Switch the display that appears whilst discs are playing. Switching Display for Discs: Each time you press the DISP button, the display during disc play switches as follows. • You can give names to discs through the presetting disc name function (see p.
Adjust various parameters of sound quality. Press the AUD button to enter the control mode. Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change as follows: Pressing the FM button advances the display, and pressing the AM button reverses it.
Function of the KRC-677R You can dim the display. The dimmer function is not available for units if the dimmer cable is not connected. Turning Dimmer On/Off: NOTE Dimmer Function of the KRC-677R You can change the display in each mode.
You can switch the colour of the button illumination between green and amber. Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Press the ¢ button repeatedly until the Selectable Illumination function appears in the display.
With automatic time adjustment, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). You can also set the time manually if the automatic time adjustment function is turned off.
A red indicator blinks on the unit after the faceplate is removed, warning potential thieves. The factory default for this function is "ON". Turning Disabled System Indicator On/Off: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
£ F M A M Shaft Depression The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing Faceplate: Press the release button and drop open the faceplate. In its dropped condition, whilst drawing the faceplate to one side, pull it to the front and remove it.
— 33 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 2 CAUTION Accessories ..........................................1 ........
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 P.CONT TEL MUTE ANT.CONT Rear right output (Red) Rear left output (White) Front left output (White) Front right output (Red) KENWOOD disc changer / DAB control input Ba.
— 35 — Installation Connecting the ISO Connector (see p.34) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below.
English — 36 — Removing the hard rubber frame ■ When the lower level is removed, remove the upper two locations. 2 The frame can be removed from the top side in the same manner. NOTE Catch Lock Engage the catch pins on the removal tool and remove the two locks on the lower level.
— 37 — What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. SOLUTION POSSIBLE CAUSE PROBLEM The tape head is dirty.
English — 38 — External disc control mode SOLUTION POSSIBLE CAUSE PROBLEM The disc control mode cannot be selected. No cable has been connected to the disc changer input terminal on the unit. Connect the cable to the disc changer input terminal on the unit.
— 39 — The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. Nothing has been recorded on the MD. ] The next MD is automatically played back BLANK No disc magazine has been loaded in the changer.
English — 40 — Specifications FM tuner section Frequency Range (50 kHz Space) ................87.5 MHz-108.0 MHz Usable Sensitivity (S/N: 26dB) ....................................0.7 µV/75 Ω Quieting Sensitivity (S/N: 46dB) ...................
Ein wichtiger Punkt beim Kauf des Geräts Kenwood KRC-677R (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood KRC-677R noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood KRC-677R - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood KRC-677R reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood KRC-677R erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood KRC-677R besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood KRC-677R verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood KRC-677R. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood KRC-677R gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
