Benutzeranleitung / Produktwartung KDC-X889 des Produzenten Kenwood
Zur Seite of 64
CD-RECEIVER KDC-X889 KDC-MP828 KDC-MP7028 KDC-MP728 KDC-X789 KDC-MP628 INSTR UCTION MANU AL © B64-2962-00/00 (KW) T ake the time to r ead through this instruction manual. F amiliarity with installation and operation proc edures will help you obtain the best performance from your new CD-receiv er .
2 | English Con tents Safety precautions 4 Notes 5 About CDs 7 About AA C, MP3 and WMA 8 Notes on Multi-function Key Sy stem 9 General featur es 10 Pow er Selecting the Source Volume Attenuator Audio .
English | 3 Menu system 41 Menu System Security Code T ouch Sensor T one Manual Clock Adjustment Date Adjustment Date Mode Synchronize Clock DSI (Disabled System Indicator) Selectable Illumination Dim.
4 | English Safety precautions About CD play ers/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players.
English | 5 Notes • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. • P ress the reset button if the disc auto changer fails to operate correctly .
6 | English 2 CAUTION Use of controls or adjustments or performance of procedures other than those specified her ein may result in hazardous radiation exposur e. In compliance with Federal Regulations, f ollowing are repr oductions of labels on, or inside the product relating to laser product saf ety.
English | 7 Handling CDs • Don ’t touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
8 | English About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is out of the specification, may not able to be played normally , or the file and folder names may not be display ed correctly.
English | 9 Notes on Multi-function Key S ystem Multi-function Key System ser ves to control various functions with the [1] — [6] buttons. The basic operation of the Multi-function Key System is described below .
10 | English General fea tures Powe r T urning ON the P ower Press the [SRC] button. T urning OFF the P ower Press the [SRC] button for at least 1 sec ond.
English | 11 1 Select the source for adjustment Press the [SRC] button. 2 Enter A udio Control mode Press the [VOL] knob. 3 Select the Basic Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below .
12 | English General fea tures F unction of the KDC-X889/KDC-MP828 Audio C ontrol 1 Select the source for adjustment Press the [SRC] button. 2 Enter A udio Control mode Press the [VOL] knob. 3 Select the Audio item for adjustment Press the [VOL] knob.
English | 13 F unction of the KDC-X889/KDC-MP828 Audio Setup Setting the Sound system, such as Volume offset and Dual Zone. 1 Select the source for adjustment Press the [SRC] button. 2 Enter A udio Setup mode Press the [VOL] knob for at least 1 second.
14 | English General fea tures F unction of the KDC-X889/KDC-MP828 Sound Field C ontrol 1 Select the source for adjustment Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "S.F .
English | 15 F unction of the KDC-X889/KDC-MP828 Sound Management system 1 Select the source for adjustment Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "S.M.S" is displayed above the [2] button.
16 | English General fea tures Equalizer C ontrol 1 Select the source for adjustment Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "EQ"/"SYS.Q" is displayed above the [3] (KDC- X889/MP828)/[1] (KDC-MP7028/MP728/X789/MP628) button.
English | 17 F unction of the KDC-X889/KDC-MP828 WOW Control 1 Select the source for adjustment Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "WOW " is displayed above the [4] button.
18 | English General fea tures F unction of the KDC-X889/KDC-MP828 Memory mode The values of F ield Control can be stored in memory. 1 Adjust the item y ou wish to put in memory By referring to <So.
English | 19 7 Select the characters Push the Contr ol knob to [FM] or [AM]. • Characters can be entered by using a remote with a numbers buttons. Example: If "DANCE" is entered.
20 | English General fea tures Display Mode S witching Switching the display mode . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [6] (KDC- X889/MP828)/[2] (KDC-MP7028/MP728/X789/MP628) button.
English | 21 5 Selec t the graphic/ spectrum analyzer display Press the [3] ("Gr aph") button. 6 Select the graphic/ spectrum analyzer display part display Push the Contr ol knob to [ 4 ] or [ ¢ ]. Each time the button is pressed, the g raphic display/ spectrum analyzer display switches as shown below .
22 | English General fea tures Display T ype B T ext Display Switching Switching the text display . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [6] (KDC- X889/MP828)/[2] (KDC-MP7028/MP728/X789/MP628) button.
English | 23 • * 1 If the contents of the information cannot be displayed, Pla y time or Frequency is displayed. • * 2 F unction of the KDC-X889/MP828/X789 • Auxiliary input name is displayed for the Auxiliary input source. • If the text for the Sirius tuner source, including Channel name, etc.
24 | English General fea tures The text display in the Upper te xt display part In T uner source Information Display Station name, P rogram Service name* 1 or Fr equency "BAND+ch+SNPS" Radio.
English | 25 The text display in the Middle te xt display part (Display T ype C) In T uner source Information Display Spectrum Analyzer & Clock "Speana/Clock" Date "Date" Blank.
26 | English General fea tures The text display in the L ower te xt display par t In T uner source Information Display Indicator "Indicat or" Spectrum Analyzer & Clock "Speana/Clock.
English | 27 Selec t the F ont Color Push the Contr ol knob to [ 4 ] or [ ¢ ]. 7 Exit display c ontrol mode Press the [6] ("RTN") button. F unction of the KDC-X889/KDC-MP828/KDC- MP7028/KDC.
28 | English T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, F M2, and FM3 bands.
English | 29 Example: Desired frequency Press butt on 92.1 MHz (FM) [0], [9], [2], [1] 810 kHz (A M) [0], [8], [1], [0] Canceling Dir ec t Ac cess T uning Press the [DIRECT ] button on the remote . Station Pr eset Memor y Putting the station in the memory.
30 | English RDS featur es F unction of the KDC-X889/KDC-MP828/KDC-X789 Radio T ext Scroll Scrolling the displayed radio text. Hold down on [FM] of the C ontrol knob for at least 1 second. PTY (Program T ype) Selecting the Program T ype and searching for a station.
English | 31 23. Personality "P ersonality" 24. Public "Public" 25. College "College " 26. W eather "W eather" • Speech and Music include the Program type below . Music: No.7 — 19, 21 Speech: No.3 — 6, 20, 22 — 26 • The Program Type can be put in the [1] — [6] button memory and called up quick ly.
32 | English CD/Audio file/External disc contr ol features Playing CD & A udio file When there is no disc inserted 1 Open the panel. Press the [ 0 ] button. 2 Insert a disc. • When the faceplate has been slid open, it might interfere with the shift lever or something else.
English | 33 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD Changer" CD changer "MD Changer" MD changer Pause and play Press the C ontrol knob.
34 | English CD/Audio file/External disc contr ol features T rack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or Audio file folder f older you’ re listening to. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "REP" is displayed above the [4] button.
English | 35 F unction of the KDC-X889/KDC-MP828/KDC-X789 F unction of Audio file Disc Random Play Playing randomly from all of the Audio files recorded in the disc . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "RDM" is displayed above the [3] button.
36 | English CD/Audio file/External disc contr ol features F unction of the KDC-X889/KDC-MP828/KDC-X789 F unction of ACDrive disc Switching the Pla y mode Arrange the playing orders of the songs by categories. 1 Selec t the key function section Press the [NEXT] button.
English | 37 SIRIUS tuner contr ol features Selec t SIRIUS Satellite Radio Mode Selecting the SIRIUS Satellite Radio T uner (optional accessory) connected to this unit. Selecting SIRIUS Mode Press the [SRC] button. Select the "SIRIUS" display.
38 | English SIRIUS tuner contr ol features Cat egor y and Channel Search Selecting the channel and categor y you want to receive . 1 Enter Ca tegor y and Channel Search mode Press the C ontrol knob. 2 Select the Category Push the Contr ol knob to [FM] or [AM].
English | 39 Channel Scan Every receivable Channel is checked for 10 seconds. 1 Star t Channel Scan Press the [ AUT O] button for a t least 2 seconds. The channel number display blinks. 2 Release it when the song you want to listen to is receiv ed Push the Contr ol knob to [ 4 ] or [ ¢ ].
40 | English HD Radio control f eatures T uning Selecting the station. 1 Select HD Radio source Press the [SRC] button. Select the "HD Radio" display. 2 Select the HD FM band Push the Contr ol knob to [FM]. Each time the knob is pushed to [FM], it switches between the HF1, HF2, and HF3 bands.
English | 41 Menu system Menu Sy stem Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
42 | English Menu system In Standby mode Secur ity C ode Because authorization by the Security Code is required when it’ s removed from the vehicle , personalizing this unit is by using the Security Code is a help in preventing theft. • The setup Security Code can be done when the <Demonstration mode Setting> (page 50) is set as OFF .
English | 43 2 Enter Date A djust mode Press the C ontrol knob for at least 1 second. The date display blinks. 3 Selecting the item (day , month, or year) to adjust Push the Contr ol knob to [ 4 ] or [ ¢ ]. The items that are blinking are items that can be adjusted.
44 | English Menu system In Standby mode Built-in Amp Setting Built-in amplifier is controlled. T urning OFF this control enhances the preout quality. Display Setting " AMP : ON" The built-in amplifier activat es. " AMP : OFF" The built-in amplifier deactivat es.
English | 45 • Do not use G-Analyzer stop watch on the Public r oads. 1 Select G-Analyzer Stop Wa tch mode Push the Contr ol knob to [FM] or [AM]. Select the "Stop W atch" display . 2 Enter G-Analyzer Stop Watch mode Press the C ontrol knob for at least 1 second.
46 | English Menu system F unction of the KDC-X889/KDC-X789 When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 Select AMP Control mode Push the Contr ol knob to [FM] or [AM]. Select the " AMS Control" display .
English | 47 4 Exit Receiv e mode Press the [MENU] button. • Even if the " Auto" setting, and analog broadcast will be received during the reception of a ball game mode (non-delayed broadcast program).
48 | English Menu system In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input func tion. Display Setting "Built in AUX : OFF" When selecting the source there ’ s no Auxiliar y Input. "Built in AUX : ON" When selecting the source there ’ s Auxiliar y Input.
English | 49 F unction of the KDC-X889/KDC-MP828/KDC-X789 F unction of ACDrive disc V oice Inde x Setting the announcement during the play of AC Drive disc. Display Setting "V oice Index : ON" Guide is announc ed. "V oice Index : OFF" Not be announced .
50 | English Menu system F unction of the KDC-MP7028/KDC-MP728/KDC- X789/KDC-MP628 Other than Standby mode Audio Pr eset Call Recalling the sound setup register ed by <Audio Preset Memory> (page 49). 1 Select the source Press the [SRC] button. 2 Enter Menu mode Press the [MENU] button f or at least 1 second.
English | 51 Basic Operations of r emote Loading and Replacing the battery Use two " AA "-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case .
52 | English Basic Operations of r emote Audio C ontrol [A UD] button Select the Audio item for adjustment. [VOL] buttons Adjust the Audio item. • Refer to <Audio C ontrol> (page 10/12) for the operation method, such as the procedures of A udio control and others.
English | 53 In SIRIUS tuner source [FM] button Select the preset band. [ 4 ]/ [ ¢ ] buttons Search up or down channel. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset channels. [DIRECT ] button Enters and cancels the <Direct Access T uning> (page 38) mode.
54 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Proc edure 1. T o prevent a shor t circuit, remov e the key from the ignition and disconnect the - battery.
English | 55 Connecting W ires to T erminals ANT. CONT MUTE P.CONT FRONT • L FRONT • R REAR • L REAR • R – + FRONT AUX IN FM/AM antenna input T o KENWOOD disc changer/ External optional acce.
56 | English Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars Japanese cars 1 Refer to the section <Removing the hard rubber frame> (page 58) and then remove the hard rubber frame.
English | 57 S I u 1 2 3 4 5 • Screwing the F acepla te on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off , screw in the provided screw s in the holes shown below . Accessory 5 Bottom panel • Never insert the screw in any other screw hole than the one specified.
58 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed, remove the lower two locations.
English | 59 T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON.
60 | English T uner source ? Radio reception is poor . ✔ The car ant enna is not extended. ☞ Pull the antenna out all the way . ✔ The ant enna control wire is not connected. ☞ Connect the wire correctly, r eferring to the section on <Connecting Wir es to T erminals>.
English | 61 Audio file sourc e ? Cannot play an A udio file. ✔ The media is scrat ched or dir ty. ☞ Clean the media, referring to the CD cleaning of the section on <About CDs> (page 7). ? The sound skips when an Audio file is being played .
62 | English Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ Cool down the unit by opening the windows or turning on the air conditioner .
English | 63 FM tuner section Fr equency range (200 kH z space) : 87.9 MHz – 107.9 MH z Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 µV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.
B64-2962-00_K_r4_English.Indd 64 B64-2962-00_K_r4_English.Indd 64 04.11.11 11:30:59 AM 04.11.11 11:30:59 AM.
Ein wichtiger Punkt beim Kauf des Geräts Kenwood KDC-X889 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood KDC-X889 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood KDC-X889 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood KDC-X889 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood KDC-X889 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood KDC-X889 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood KDC-X889 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood KDC-X889. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood KDC-X889 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
