Benutzeranleitung / Produktwartung KDC-X7006 des Produzenten Kenwood
Zur Seite of 40
CD-RECEIVER KDC-X7006U KDC-X7006 INSTR UCTION MANU AL © B64-3627-00/00 (MW) B64-3627-00_00.Indd 1 B64-3627-00_00.Indd 1 07.1.10 3:50:06 PM 07.1.10 3:50:06 PM.
2 | English Con tents Safety precautions 3 Notes 4 General featur es 6 Pow er Selecting the Source Volume Attenuator Audio Control Adjusting the detail of Audio Contr ol Audio Setup Speaker Setting Su.
English | 3 Safety precautions 2 W ARNING T o prev ent injury or fire, take the follo wing precautions: • T o prevent a short circuit, never put or leave an y metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your ey es on the unit ’ s display when you are driving for an y extended period.
4 | English • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters conforming to ISO 8859-1 character set can be displayed.
English | 5 An online manual about audio files is put on the site, ww w .kenw ood.com/audiofile/ . On this online manual, detailed information and notes which ar e not written in this manual are provided . Mak e sure to read through the online manual as well.
6 | English General fea tures Powe r T urning ON the P ower Press the [SRC] button. ⁄ • When the power is ON, the <Security Code> (page 25) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond.
English | 7 V olume Increasing V olume T urn the [ VOL] knob clockwise. Decreasing V olume T urn the [ VOL] knob counterclockwise. Attenua tor T urning the volume down quickly . Press the [ A T T ] button. Each time you press the button, the Attenuat or turns ON and OFF .
8 | English General fea tures Adjusting the detail of A udio Contr ol Among the Basic Audio items, y ou can adjust the Bass level, Middle level, and Treble lev el in detail.
English | 9 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standb y Press the [SRC] button. Select the "ST ANDBY " display . Refer to <Selecting the Source> (page 6). 2 Enter Speaker Setting mode Press the [VOL] knob.
10 | English General fea tures F unc tion Con trol mode T o set up various func tions of this unit, select tree- structured function items. 1 Enter Function Con trol mode Press the [FNC] button. 2 Select your desired setup item Select a setup item using the Control knob.
English | 11 Display T ype A/ Display T ype B Status Setting Determine whether the On and Off statuses of various functions are to be displayed on the Display T ype A/B. 1 Enter Status Setting mode Using the Contr ol knob, select "DISP" > "ST A TUS" .
12 | English General fea tures T ext Display Selection — Display T ype C&D— Changing the text display . 1 Enter T ext Display Selection mode Using the Contr ol knob, select "DISP" > "TEXT " . F or the operation method, refer to <F unc tion Control mode> (page 10).
English | 13 The te x t display In T uner source Information Display Condition Station name "SNPS" 34 Fr equency "Fr equency" 34 Spectrum Analyzer & Clock * 1 "Speana/Cloc.
14 | English General fea tures Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD . 1 Receive/pla y the station/disc you want to attach a title to ⁄ • A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Using the Contr ol knob, select "MENU" .
English | 15 Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 Press the Release button. Drop open the faceplate. 2 Drawing the facepla te to left side pull it to forward and remov e it.
16 | English T uner/T V control f eatures T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . Refer to <Selecting the Source> (page 6). 2 Select the band Push the Contr ol knob towards [FM] or [ AM].
English | 17 Station Pr eset Memor y Putting a station in the memory. 1 Select the band Push the Contr ol knob towards [FM] or [ AM]. 2 Select the frequenc y to put in the memory Push the Contr ol knob towards [ 4 ] or [ ¢ ]. 3 Enter Preset Memory mode Using the Contr ol knob, select "P .
18 | English T uner/T V control f eatures F unction of LX BUS T elevision TV T uning Selecting the TV channel of a connected LX BUS T elevision (optional accessor y). The action depends on the setting of the connected LX BUS T elevision. Refer to the user instruction of the LX BUS T elevision for details.
English | 19 CD/USB device/A udio file/External disc control f eatures SRC FNC SRC S.MODE SCAN REP RDM/ A.RDM M.RDM E Control knob IN indicator Play time Release button Function icon File number Folder number Playing CD & A udio file When there is no disc inserted 1 Drop open the faceplate Press the Release button.
20 | English CD/USB device/A udio file/External disc control f eatures F unction of KDC-X7006U Playing USB (iP od) device When the USB devic e is not connected C onnect the USB device Playback of the file contained in the USB device starts. When the USB devic e is connected Select USB source Press the [SRC] button.
English | 21 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want.
22 | English CD/USB device/A udio file/External disc control f eatures Play function of CD and Audio file Setting up the Repeat Play and Scan Play 1 Set up the play function Using the Contr ol knob, set your desired setup item to On/Off . F or the operation method, refer to <F unc tion Control mode> (page 10).
English | 23 T ext/Title Scroll Scrolling the displayed CD text, A udio file text, or MD title. Push the Contr ol knob toward up for at least 2 seconds. ⁄ • When the <Display Illumination Control> (page 27) is set to OFF , the display may black out while scrolling.
24 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Using the Contr ol knob, select "MENU" .
English | 25 In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle.
26 | English Menu system In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode T urn the Control knob . Select the "Clock Adjust" display . 2 Enter Clock Adjust mode Press the C ontrol knob for at least 1 second. The clock display blinks.
English | 27 In Standby mode DSI (Disabled Sy stem Indicator) A red indicator will blink on the unit after the faceplate is remov ed, warning potential thieves.
28 | English Menu system When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 Select AMP Control mode T urn the Control knob . Select the " AMP Contr ol" display. 2 Enter AMP Contr ol mode Press the C ontrol knob for at least 1 second.
English | 29 Auxiliary Input Display Setting & Station/Disc Naming Selecting the display when changing to Auxiliary input source. F or the Station/Disc Naming ref er to the <Station/Disc Naming (SNPS/DNPS)> (page 14). 1 Select Auxiliar y input source Press the [SRC] button.
30 | English Menu system Other than Standby mode Audio Pr eset Recall Recalling the sound setup register ed by <Audio Preset Memory> (page 30). 1 Select the source Press the [SRC] button. Refer to <Selecting the Source> (page 6). 2 Enter Menu mode Using the Contr ol knob, select "MENU" .
English | 31 Basic Operations of r emote contr ol Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case .
32 | English Basic Operations of r emote contr ol Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. ⁄ • Refer to <Audio C ontrol> (page 7) for the operation method, such as the procedures f or Audio control and others operations.
English | 33 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........2 6 ..........1 7 ..........1 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery.
34 | English Connecting W ires to T erminals P .CONT ILLUMI ANT . CONT MUTE EXT . CONT FRONT L FRONT R REAR L REAR R – + SUB WOOFER REAR FRONT REMO.CONT FM/AM antenna input Fr ont left output ( Whit.
English | 35 Installation non-Japanese cars Fir ewall or metal suppor t Screw (M4X8) (commercially available) Self-tapping screw (commercially available) Metal mounting strap (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
36 | English Installation Removing the hard rubber fr ame 1 Engage the catch pins on the removal t ool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. Catch Lock Accessory 2 Removal tool 2 When the upper level is remov ed, remove the lower two locations.
T roubleshooting Guide English | 37 Some functions of this unit may be disabled by some settings made on this unit. ! Cannot switch to A ux source. ▲ • AUX is not turned on. ☞ <Built-in Auxiliary input Setting> (page 29) • A UX cannot be used when the KCA-iP200 is connected.
T roubleshooting Guide 38 | English The messages shown belo w display your systems condition. Eject: • No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. • No CD in the unit. No Disc: No disc has been loaded in the disc magazine.
English | 39 No Device: The USB device is selec ted as a source although no USB device is connected. ➪ Change the source to any sour ce other than USB. Connect an USB device, and change the source to USB again. N/A Device: An unsupported USB device is connected.
40 | English Specifications FM tuner section Fr equency range (50 kH z space) : 87.5 MH z – 108.0 MHz Fr equency range (200 kH z space) : 87.9 MH z – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 V/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.
Ein wichtiger Punkt beim Kauf des Geräts Kenwood KDC-X7006 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood KDC-X7006 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood KDC-X7006 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood KDC-X7006 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood KDC-X7006 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood KDC-X7006 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood KDC-X7006 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood KDC-X7006. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood KDC-X7006 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
