Benutzeranleitung / Produktwartung KDC-W707Y des Produzenten Kenwood
Zur Seite of 48
CD-RECEIVER KDC-W808 KDC-W707 INSTR UCTION MANU AL © B64-3142-00/00 (EW) B64-3142-00_E_English.indd 1 B64-3142-00_E_English.indd 1 05.5.9 2:36:47 PM 05.
2 | English Con tents Safety precautions 4 Notes 5 About CDs 7 About AA C, MP3 and WMA 8 General featur es 9 Pow er Hiding the Control P anel Selecting the Source Volume Attenuator System Q Speaker Se.
English | 3 The " AAC" logo is trademark of Dolby Laboratories. Audio Pr eset Call Selecting Russian Characters Demonstration mode Setting Acc essories/ Installation Proc edure 40 Connecting W ires to T erminals 41 Installation 43 Removing the Unit 44 T roubleshooting Guide 45 Specifications 48 B64-3142-00_E_English.
4 | English Safety precautions About CD play ers/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players.
English | 5 Notes • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. • P ress the reset button if the disc auto changer fails to operate correctly .
6 | English About "Media Manager" of PC application attached to KDC- W808 • "Media Manager" is recor ded in the CD-R OM attached to this unit. • Ref er to the attached installation manual for the installation method of "Media Manager" .
English | 7 Handling CDs • Do not touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it.
8 | English About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not comforming to the specification, may not play normally , or the file and folder names may not display correctly .
English | 9 General fea tures Powe r T urning ON the P ower T urn the vehicle ignition ON. The control panel appears. T uring OFF the P ower T urn the vehicle ignition OFF or press the [SRC] button for at least 1 second. The control panel is hidden. • Do not apply force to the contr ol panel during this operation.
10 | English General fea tures Selecting the S ource Press the [SRC] button. Source required Display T uner "TUNER" CD "Compact Disc" External disc (Optional accessory) "CD Ch.
English | 11 Audio C ontrol 1 Select the source to adjust Press the [SRC] button. 2 Enter A udio Control mode Press the [VOL] knob. 3 Select the Basic Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below .
12 | English General fea tures Audio Setup Setting the Sound system, such as Cross over Network. 1 Select the source to adjust Press the [SRC] button. 2 Enter A udio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob.
English | 13 Display Setting Changing the display mode. 1 Enter display C ontrol mode Press the C ontrol knob for at least 1 second. "Display Control" is display ed. 2 Select the Display mode Press the C ontrol knob. Each time you press the knob, the display alternates between the display modes shown in the table below .
14 | English General fea tures Display T ype B T ext Selec tion for Display Selecting the text display. 1 Enter display c ontrol mode Press the C ontrol knob for at least 1 second. "Display Control" is display ed. 2 Select the display T ype Press the C ontrol knob.
English | 15 Display T ype C T ext Display Switching Changing the text display . 1 Enter display c ontrol mode Press the C ontrol knob for at least 1 second. "Display Control" is display ed. 2 Select the display T ype Press the C ontrol knob.
16 | English General fea tures The text display in the Upper te xt display part In T uner source Information Display Progr am Ser vice name (FM) "BAND+ch+PS"* Radio text (FM) "Radio T e.
English | 17 • * If the contents of the information cannot be displayed, Kenwood L ogo is displayed. B64-3142-00_E_English.indd 17 B64-3142-00_E_English.
18 | English General fea tures The text display in the L ower text display part In T uner source Information Display Indicator "Indicator" Spectrum Analyzer & Clock "Speana/Clock&qu.
English | 19 Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 T urn the ignition OFF or press the [SRC] button for at least 1 sec ond. The power turns OFF and the faceplate slides open.
20 | English T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
English | 21 Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Contr ol knob towards [FM] or [ AM]. 2 Open Auto Memory Entry Press the [ AME] button for at least 2 seconds.
22 | English RDS featur es T raffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio . Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF .
English | 23 PTY (Progr am T ype) Selecting the Program T ype and searching for a station. 1 Enter PTY mode Press the C ontrol knob. "PT Y Select" is displayed. • This function cannot be used during a traffic bulletin or AM reception. 2 Select the Program T ype Push the Contr ol knob towards [FM] or [ AM].
24 | English RDS featur es Changing Language for PTY Function Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 23). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Contr ol knob towards [FM] or [ AM].
English | 25 CD/Audio file/External disc contr ol features Playing CD & A udio file When there is no disc inserted 1 Open the panel Press the [ 0 ] button. 2 Insert a disc. • When the faceplate slides open, it might interfere with the shift lever or other vehicle function.
26 | English CD/Audio file/External disc contr ol features Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
English | 27 Scan Play Playing the first part of each song on the disc or Audio file folder y ou are listening to and searching for the song y ou want to hear . 1 Start Scan Play Press the [SCAN] button. "Scan ON" is displayed. 2 Release the button when the song you w ant to hear is played Press the [SCAN] button.
28 | English CD/Audio file/External disc contr ol features F unction of Audio file Folder Select Quickly selecting the folder you want to hear . 1 Enter F older Select mode Press the [F .SEL] button. "Select Mode" is displayed. During Select mode the folder information is displayed as shown below .
English | 29 2 Start the Letter Seek Push the Contr ol knob towards [ 4 ] or [ ¢ ]. The initial of Genre name, Artist name, or Album name is displayed and announced in order . • The announcement of the initial can be canceled by <Voice Index> (page37).
30 | English CD/Audio file/External disc contr ol features T ext/Title Scroll Scrolling the displayed CD text, Audio file t ext, or MD title. Push the Contr ol knob toward [FM] for a t least 1 second. B64-3142-00_E_English.indd 30 B64-3142-00_E_English.
English | 31 Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
32 | English Menu system In Standby mode Secur ity C ode Because authorization by the Security Code is required when the audio unit is remo ved from the vehicle, personalizing this unit by using the Security Code is helpful in preventing theft. • Setup Security Code when the <Demonstration mode Setting> (page 39) is set as OFF .
English | 33 4 Exit Clock adjustment mode Press the [MENU] button. In Standby mode Date A djustment 1 Select Date Adjust mode Push the knob towards [F M] or [AM]. Select the "Date Adjust" display . 2 Enter Date A djust mode Press the C ontrol knob for at least 1 second.
34 | English Menu system In Standby mode Built-in Amp Setting Controlling the built-in amplifier . T urning OFF this control enhances the preout quality. Display Setting " AMP:ON" The built-in amplifier activat es. " AMP:OFF" T he built-in amplifier deactivates.
English | 35 When you set "News:00min" — "News:90min" , the News Bulletin Interrupt function is ON. When the News Bulletin is ON, the "News " indicator is ON. When the news bulletin starts, "News " is displayed, and the tuner changes to the news bulletin.
36 | English Menu system In FM reception Monaural Rec eption Y ou can reduce the noise when stereo broadcasts are receiv ed as monaural. Display Setting "MONO:OFF" The monaur al reception is OFF . "MONO:ON" The monaural r eception is ON.
English | 37 In Standby mode Po wer OFF Timer Setting the timer to turn this unit’ s power OFF automatically when Standby mode continues. Using this setting can save the v ehicle’ s battery power . Display Setting "Pow er OFF :– – –" P ower OFF Timer function is OFF .
38 | English Menu system Audio Pr eset Memory Registering the value setup by Sound Contr ol. The memory cannot be erased by the Reset button. 1 Setup Sound Contr ol Refer to the f ollowing operations to setup the Sound Control.
English | 39 In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Contr ol knob towards [FM] or [ AM]. Select the "DEMO Mode" display. 2 Set the Demonstration mode Press the C ontrol knob for at least 2 seconds.
40 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........1 4 ..........1 5 ..........1 Installation Proc edure 1. T o prevent shor t circuits, r emove the key from the ignition and disconnect the - terminal of the battery.
English | 41 Connecting W ires to T erminals £ Ó Î { x È Ç n £ Ó Î { x È Ç n 1/ * °" / / °" / 8/ °" / Battery wire ( Y ellow) Ignition wire (Red) FM/A.
42 | English Connector F unc tion Guide Pin Numbers for ISO Connectors Cable Colour F unctions External Power Connector A-4 Y ellow Batter y A-5 Blue/White Power Control A-6 Orange/White Dimmer A-7 Re.
English | 43 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
44 | English Removing the Unit Removing the hard rubber fr ame I nsert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. Removing the Unit 1 Refer to the section <Removing the hard rubber frame> (page 44) and then remove the hard rubber frame.
English | 45 T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The power does not turn ON.
46 | English T uner source ? Radio reception is poor . ✔ The car antenna is not extended. ☞ Pull the antenna out all the way . ✔ The antenna control wir e is not connected. ☞ Connect the wire correctly, r eferring to the section on <Connecting Wir es to T erminals>.
English | 47 The messages shown belo w display your systems condition. Eject: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ Load the disc magazine pr operly. No CD in the unit. ➪ Inser t the CD. No Disc: No disc has been loaded in the disc magazine.
48 | English Specifications subject to change without notice. FM tuner section Fr equency range (50 kH z space) : 87.5 MHz – 108.0 MH z Usable sensitivity (S/N = 26dB) : 0.7 μV/75 Ω Quieting Sensitivity (S/N = 46dB) : 2.5 μV/75 Ω Fr equency response (±3.
Ein wichtiger Punkt beim Kauf des Geräts Kenwood KDC-W707Y (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood KDC-W707Y noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood KDC-W707Y - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood KDC-W707Y reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood KDC-W707Y erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood KDC-W707Y besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood KDC-W707Y verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood KDC-W707Y. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood KDC-W707Y gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
