Benutzeranleitung / Produktwartung KDC-W6537UY des Produzenten Kenwood
Zur Seite of 40
CD-RECEIVER KDC-W6537U KDC-W6537UY INSTR UCTION MANU AL © B64-3620-00/00 (EW/E2W) B64-3620-00_00_English.indd 1 B64-3620-00_00_English.indd 1 06.12.19 11:31:36 AM 06.
2 | English Con tents Safety precautions 3 Notes 4 General featur es 7 Pow er Selecting the Source Volume Attenuator Audio Control Audio Setup Speaker Setting Switching Display Subwoofer Output Theft .
English | 3 Safety precautions 2 W ARNING T o prev ent injury or fire, take the follo wing precautions: • T o prevent a short circuit, never put or leave an y metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your ey es on the unit ’ s display when you are driving for an y extended period.
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters which can be displayed by this unit are A-Z 0-9 @ " ‘ ` % & * + – = , .
English | 5 About Audio file • Playable Audio file AAC-L C (.m4a), MP3 (.mp3), WMA (.wma), W AV (.wav) • Playable disc media CD-R/R W/ROM • Playable disc file forma t ISO 9660 Level 1/2, Joliet, Romeo, L ong file name.
6 | English Notes Handling CDs • Do not touch the recor ding sur face of the CD. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the cent er of the disc and move outward.
English | 7 General fea tures Powe r T urning ON the P ower Press the [SRC] button. ⁄ • When the power is ON, the <Security Code> (page 23) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond.
8 | English General fea tures Attenua tor T urning the volume down quickly . Press the [ A T T ] button. Each time you press the button, the Attenuat or turns ON and OFF . When the Attenuator is ON, the " A T T" indicator blinks. Audio C ontrol 1 Select the source to adjust Press the [SRC] button.
English | 9 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standb y Press the [SRC] button. Select the "ST ANDBY " display . 2 Enter Speak er Setting mode Press the [VOL] knob. 3 Select the Speaker type T urn the [ VOL] knob.
10 | English General fea tures Subw oofer Output T urning the Subwoofer output ON or OFF . Push the Contr ol knob toward down for at least 2 seconds. Each time you push the knob, Subwoofer output switches ON and OFF . When it is ON, "SW ON" is displayed.
English | 11 T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
12 | English T uner features F unction of remote control Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] or [AM] button. 2 Enter Direct Ac cess T uning mode Press the [DIRECT ] button on the remote control. "– – – –" is displayed.
English | 13 RDS featur es T raffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio . Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF .
14 | English RDS featur es PTY (Progr am T ype) Selecting the Program T ype and searching for a station. 1 Enter PTY mode Press the C ontrol knob. During PT Y mode the "PT Y" indicator is ON. ⁄ • This function cannot be used during a traffic bulletin or AM reception.
English | 15 Changing Language for PTY F unc tion Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 14). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Contr ol knob towards up or down.
16 | English CD/USB device/A udio file/External disc control f eatures Playing CD & A udio file When there is no disc inserted 1 Drop open the fac eplate Press the Release button. 2 Insert a disc. 3 Push the fac eplate on the left side, and return it to its former position.
English | 17 ⁄ • Y ou can eject the disc for 10 minutes after switching off the engine. Drive Search Selecting the device inser ted in the Multi Card Reader . 1 Put the playback to pause Press the [S.MODE] button. 2 S elect a device Push the Contr ol knob towards up or down.
18 | English CD/USB device/A udio file/External disc control f eatures Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
English | 19 T rack/File/Disc/F older Repeat Replaying the music, disc in the Disc changer or Audio file folder y ou are listening to . Press the [REP] button. Each time you press the button, the Repeat P lay alternates between the modes shown in the tables below .
20 | English CD/USB device/A udio file/External disc control f eatures F unction of iPod, "Music Editor" file File select Selecting the music you want to listen to from the device or media being played now . 1 Enter File Select mode Press the [F .
English | 21 F unction of non-iPod and non-"Music Editor" file File Select 2 mode Select the target folder within the folders containing audio files. The folder which c ontains playable audio files is only displayed . 1 Enter Folder Select 2 mode Press the [F .
22 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button.
English | 23 In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle.
24 | English Menu system In Standby mode Synchr onize Clock Synchronizing the RDS station time data and this unit’ s clock. Display Setting "SYNC ON" Synchronizes the time . "SYNC OFF" Adjust the time manually . ⁄ • It takes 3 to 4 minutes to synchronize the clock.
English | 25 In Standby mode Switching preout Alternating the preout between the rear and subwoofer . ( With the subwoofer the sound outputs without being effected by fader control .) Display Setting "SWPRE R" Rear preout . "SWPRE SW" Subwoofer pr eout.
26 | English Menu system AF (A lternative F requency) When the reception is poor , automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. Display Setting " AF ON" The AF function is ON.
English | 27 F unction of KDC-W6537UY In Standby mode Selec ting Russian Characters Setting up the display of Russian characters and undistinguishable English characters. Display Setting "RUS ON" Displays te x ts using Russian characters. "RUS OFF" Displays te x ts using Eur opean characters.
28 | English Menu system Other than Standby mode Audio Pr eset Memor y Registering the value setup by Sound Contr ol. The memory cannot be erased by the Reset button. 1 S etup Sound Control Refer to the f ollowing operations to setup the Sound Control.
English | 29 Other than Standby mode Audio Pr eset Recall Recalling the sound setup register ed by <Audio Preset Memory> (page 28). 1 S elect the source Press the [SRC] button. 2 Enter Menu mode Press the [MENU] button. "MENU" is displayed .
30 | English Basic Operations of r emote contr ol Accessory of the KDC-W6537UY Loading and Replacing the battery Use two " AA "/ "R6"-size batteries.
English | 31 Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. ⁄ • Refer to <Audio C ontrol> (page 8) for the operation method, such as the procedures f or Audio control and others operations.
32 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........1 4 ..........2 5 ..........1 6 ..........1 Installation Proc edure 1. T o prevent shor t circuits, r emove the key from the ignition and disconnect the - terminal of the battery.
English | 33 Connecting W ires to T erminals MUTE P .CONT ANT .CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 REMO.CONT AUX IN Battery wire ( Y ellow) Ignition wire (Red) FM/AM antenna input Antenna Cord (ISO) Antenna Conversion A daptor (ISO–JASO) (Accessory 3 ) T o connect the Kenwood navigation system, consult your navigation manual.
34 | English Connecting W ires to T erminals Connector F unc tion Guide Pin Numbers for ISO Connectors Cable Colour F unctions External Power Connector A-4 Yellow Batt er y A-5 Blue/White Pow er Contr.
English | 35 Installation Fir ewall or metal suppor t Screw (M4X8) (commercially available) Self-tapping screw (commercially available) Metal mounting strap (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
36 | English Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. Catch Lock Accessory 2 Removal tool 2 When the upper level is removed, r emove the lower two locations.
English | 37 T roubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! Cannot switch to A ux source. ▲ • AUX is not turned on. ☞ <Built-in Auxiliary input Setting> (page 28) • AUX cannot be used when the K CA-iP200 is connected.
38 | English The messages shown belo w display your systems condition. EJEC T: • No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. • No CD in the unit. NO DISC: No disc has been loaded in the disc magazine.
English | 39 FM tuner section Fr equency range (50 kH z space) : 87.5 MH z – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV /75 Ω Quieting Sensitivity (S/N = 46dB) : 1.
B64-3620-00_00_English.indd 40 B64-3620-00_00_English.indd 40 06.12.19 11:31:52 AM 06.12.19 11:31:52 AM.
Ein wichtiger Punkt beim Kauf des Geräts Kenwood KDC-W6537UY (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood KDC-W6537UY noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood KDC-W6537UY - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood KDC-W6537UY reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood KDC-W6537UY erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood KDC-W6537UY besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood KDC-W6537UY verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood KDC-W6537UY. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood KDC-W6537UY gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
