Benutzeranleitung / Produktwartung KDC-W6527SE des Produzenten Kenwood
Zur Seite of 44
KDC-W6527SE KDC-W6527 KDC-W657 CD-RECEIVER INSTR UCTION MANU AL © B64-2879-00/00 (EW/E2W) KDC-W6527SE_EE2_U.S.Indd 1 04.4.7, 4:08:00 PM.
2 | English Con t ents Sa fe ty precautions 3 Notes 5 Notes on playing MP3/WMA 6 A bout CDs 8 G eneral fea tures 9 Pow er Selecting the Source Volume Attenuator System Q A udio Control Speaker Setting.
English | 3 Sa fe ty precautions 2 CA UTION To pr event damage to the machine , take the following precautions: • Make sure to gr ound the unit to a negative 12V DC power supply . • Do not open the top or bottom cov ers of the unit. • Do not install the unit in a spot exposed to dir ect sunlight or excessive heat or humidity .
4 | English Sa fe ty precautions NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly , wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
6 | English Notes on playing MP3/WMA KDC-W6527SE/ W6527/ W657 can play MP3 (MPEG1, 2 Audio Layer 3)/WM A. Note, however , that the MP3/WMA recor ding media and formats acceptable are limited. When writing MP3/WMA, pay attention to the f ollowing restrictions.
English | 7 MP3/WMA playing order When selected for play , F older Search, File Sear ch, or for F older Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they ar e expected to be played may not match the or der in which they are actually played.
8 | English Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after r eading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 9 G eneral f eatures Powe r Tu rning ON the Pow er Pr ess the [SRC] button. Tu rning OFF the Pow er Pr ess the [SRC] button for at least 1 second.
10 | English G eneral f eatures Syst em Q Y ou can recall the best sound setting preset for different types of music. 1 S elect the source to set Pr ess the [SRC] button. 2 S elect the Sound type Pr ess the [Q] butt on. Each time the button is pressed the sound setting switches.
English | 11 Each time the button is pressed the setting switches as shown below . S peaker type Display OFF "Speaker OFF" F or 5 & 4 in. speak er "Speak er 5/4inch. " F or 6 & 6x9 in. speak er "Speaker 6*9/6inch" F or the OEM speak er "Speaker O .
12 | English G eneral f eatures Upper text display part select Y ou can select the information displayed in the upper part in Display mode "Display Type A " or "Display T ype B" . 1 Enter display con trol mode Pr ess the [DISP] button.
English | 13 • Y ou cannot display the same information as the one in the Upper text display. • When you select " Display T ype B" fo r the Display mode, y ou can select only on and off of the clock display .
14 | English G eneral f eatures A uxiliary Input Display Setting S electing the display when this device is switched to A uxiliary input source. 1 S elect Auxiliary input source Pr ess the [SRC] button. Select the " AUX"/ " AUX EXT" display.
English | 15 TEL Mute T he audio system automatically mutes when a call comes in. W hen a call comes in "CALL " is displayed. The audio system pauses. Listening to the audio during a call Pr ess the [SRC] button. The "CALL " display disappears and the audio system comes back ON.
16 | English F unction of remote Direct Acc ess T uning Entering the frequency and tuning. 1 S elect the band Pr ess the [FM] or [AM] butt on. 2 Enter Direct Acc ess T uning mode Pr ess the [DIRECT ] button on the remote. "– – – –" is displayed.
English | 17 Pr eset T uning C alling up the stations in the memory. 1 S elect the band Pr ess the [FM] or [AM] butt on. 2 C all up the station Pr ess the desired [1] — [6] button. Au to Memor y Entry P utting a station with good reception in the memory automatically.
18 | English RDS featur es Tr affic Information S witching to traffic inf ormation automatically when a traffic bulletin starts even when you aren ’t listening to the radio . Pr ess the [ TI] button. Each time the button is pressed the Traffic In for mation func tion turns ON or OFF .
English | 19 2 S elect the Program T ype Pr ess the [FM] or [AM] butt on. Each time the button is pressed the P rogram T ype switches as shown below. No. Program Type Display 1. Speech " All Speech" 2. Music " All Music" 3. News "News" 4.
20 | English RDS featur es Changing Language for PTY Function S electing the Program Type display language . 1 Enter PTY mode Refer to 'PTY (Program Type)' (page 18). 2 Enter Changing Language mode Pr ess the [DISP] button. 3 S elect the language Pr ess the [FM] or [AM] butt on.
English | 21 CD/MP3/WMA/External disc control f eatures Playing CD & MP3/WMA W hen there is no disc inserted 1 Open the panel to insert disc Pr ess the [ 0 ] button. 2 I nsert a disc. • When the faceplate has been slid open, it might interfere with the shift lever or something else.
22 | English CD/MP3/WMA/External disc control f eatures Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
English | 23 Sc an Play Playing the first part of each song on the disc or MP3/WMA folder y ou are listening to and searching for the song y ou want to listen to. 1 S tart Scan Play Pr ess the [SCAN] button. "Scan ON"/ "Track Scan ON" is display ed.
24 | English CD/MP3/WMA/External disc control f eatures Disc Naming (DNPS) A ttaching a title to a CD . 1 Play the disc you w ant to attach a name to • Refer to the 'Upper text display part select' (page 12) and select the "DNPS" display.
English | 25 Menu system Menu Sy stem S etting during operation beep sound etc. functions. T he Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
26 | English Menu system In Standby mode S ecurity Code Because authorization by the Security Code is r equired when it’ s removed from the v ehicle, personalizing this unit is by using the Security C ode is a help in preventing theft. • When the Security Code function is activated it can’t be released.
English | 27 S ynchr onize Clock S ynchronizing the RDS station time data and this unit’ s clock. Display Setting "SYNC ON" Synchronizes the time . "SYNC OFF" Adjust the time manually . • It takes 3 to 4 minutes to synchronize the clock.
28 | English Menu system F unction of the KDC-W6527SE/ KDC-W6527 In External disc, or Auxiliary input source D ual Zone S ystem M akes the sound different f or the front channel and rear channel. Display Setting "Zone 2 OFF" The fr ont and rear ar e the same source sound .
English | 29 In T uner mode Loc al S eek Only stations whose reception is good are searched for in auto seek tuning . Display Setting "Local .S OFF" The local seek function is OFF . "Local .S ON" The local seek function is ON. In T uner mode T uning Mode S ets the tuning mode.
30 | English Menu system External Display Con trol S witch the display of the External Display c onnected to this unit. Display "DISP Out Select" Each time the [ 4 ] or [ ¢ ] button is pressed the display switches. Te x t Scr oll S etting the displayed text scroll.
English | 31 When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 S elect AMP Control mode Pr ess the [FM] or [AM] butt on. Select the " AMP Control" display . 2 Enter AMP Contr ol mode Pr ess the [ 4 ] or [ ¢ ] button for at least 1 second.
32 | English A cc essory of the KDC-W6527SE/ KDC-W6527 Basic Operations of r emote L oading and Replacing the battery U se one lithium battery (CR2025). I nsert the batteries with the + and – poles aligned properly , following the illustration inside the case .
English | 33 In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations .
34 | English A cc essories/ Installa tion Procedur e A cc essories 1 ..........1 2 ..........2 3 ..........1 4 ..........1 Installation Proc edure 1. T o prevent short circuits, remove the key from the ignition and disconnect the - ter minal of the battery.
English | 35 TEL MUTE EXT. CONT P.CONT ANT.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 AUX IN C onnecting W ires to T erminals If no connections are made, do not let the wire come out from the tab . C onnect either to the power control ter minal when using the optional power amplifier , or to the antenna control terminal in the vehicle.
36 | English C onnector F unc tion Guide P in Numbers for ISO Connectors C able Colour F unctions External Power Connector A-4 Y ellow Batter y A-5 Blue/White Power Contr ol A-6 Orange/White Dimmer A-.
English | 37 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
38 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and r emove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
English | 39 Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice , first check the f ollowing table f or possible problems. G eneral ? T he pow er does not turn ON.
40 | English ? It isn’ t the set T raffic information sound volume . ✔ The set sound volume is less than the tuner sound v olume. ☞ If the tuner sound volume is louder than the set sound volume,the tuner sound volume is used. Disc source ? "A UX EXT" is displayed without achieving External disc control mode.
English | 41 Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ C ool down the unit by opening the windows or turning on the air conditioner .
42 | English FM tuner section Fr equenc y range (50 kHz space) : 87.5 MHz – 108.0 MH z Usable sensitivity (S/N = 26dB) : 0.7 µV /75 Ω Quieting Sensitivity (S/N = 46dB) : 1.
KDC-W6527SE_EE2_U.S.Indd 43 04.4.7, 4:09:15 PM.
KDC-W6527SE_EE2_U.S.Indd 44 04.4.7, 4:09:15 PM.
Ein wichtiger Punkt beim Kauf des Geräts Kenwood KDC-W6527SE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood KDC-W6527SE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood KDC-W6527SE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood KDC-W6527SE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood KDC-W6527SE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood KDC-W6527SE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood KDC-W6527SE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood KDC-W6527SE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood KDC-W6527SE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
