Benutzeranleitung / Produktwartung KDC-M9021 des Produzenten Kenwood
Zur Seite of 52
KDC-PSW9521 KDC-M907 KDC-M9021 KDC-8021 © B64-2834-00/00 (EW) COMPACT DIGITAL AUDIO INSTR UCTION MANU AL CD-RECEIVER KDC-M907 Cover 04.2.4 5:40 PM Page 1.
— 2 — English Contents Safety precautions ......................3 About RDS ..................................5 Notes on playing MP3/WMA.......6 About CDs .
— 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.
— 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. After you press the reset button, the Mask Key will be needed to restart the unit.
— 5 — About RDS The marking of products using lasers (Except for some areas) The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class.
— 6 — English Notes on playing MP3/WMA(KDC-PSW9521)/ MP3(KDC-M907/KDC-M9021) This unit can play MP3(MPEG1, 2 Audio Layer 3)/WMA. Note, however , that the MP3/WMA recording media and formats acceptable are limited. When writing MP3/WMA, pay attention to the following restrictions.
— 7 — MP3/WMA playing order When selected for play , Album Search, T rack Search, or for Album Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
— 8 — English About CDs Handling CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc.
Increasing V olume Tu rn the [VOL] knob clockwise. Decreasing V olume Tu rn the [VOL] knob counterclockwise. V olume Tu rning ON the Power Tu rn the vehicle ignition ON. The faceplate reverses and control panel is displayed. Tu rning OFF the Power Tu rn the vehicle ignition OFF .
1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below .
Press the [ANG] button for at least 1 second. Do not apply excessive force to the faceplate. It can cause damage. Faceplate Angle Adjustment Function of the KDC-PSW9521/KDC-M907/KDC-M9021 Tu rning the Non-fading output ON or OFF . Press the [NF] button for at least 1 second.
Function of the KDC-8021 Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display . 2 Enter Speaker Setting mode Press the [Q] button. "Speaker Setting" is displayed.
Switching the information displayed in Standby . 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display . 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Display Control mode Press the [FM] or [AM] button.
In CD/ External disc source Upper Part Display Information Display T rack T ime "P-T ime" Disc name "DNPS" Disc title "DISC-TITLE" T rack title "TRACK-TITLE" In.
Lower Part Display Information Display Spectrum Analyzer (KDC-PSW9521) "S/ANA" Spectrum Analyzer & Graphic "S/ANA+GRAPHIC" (KDC-M907/ M9021) Spectrum Analyzer & Clock ".
The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON.
Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display . 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 T une up or down band Press the [ 4 ] or [ ¢ ] button.
Putting a station with good reception in the memory automatically . 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select the Auto Memory Entry mode Press the [FM] or [AM] button.
Displaying the program service name and selecting the station. 1 Enter SNPP mode Press the [DNPP] button on the remote. When "SNPP" is displayed, the program service name displays the FM1, FM2, FM3 and AM band in order . For stations without a program service name the frequency is displayed instead.
Scrolling the displayed radio text. Press the [SCRL] button for at least 1 second. Radio T ext Scroll Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Press the [TI] button.
21. Social Affairs "Social Affairs" 22. Religion "Religion" 23. Phone In "Phone In" 24. T ravel "T ravel & T ouring" 25. Leisure "Leisure & Hobby" 26. Jazz Music "Jazz Music" 27. Country Music "Country Music" 28.
Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program T ype)> (page 21). 2 Enter Changing Language mode Press the [TI] button. "PTY LANG Select" is displayed. 3 Select the language Press the [FM] or [AM] button.
CD/MP3/WMA/External disc control features — 23 — IN P/S A TT ST LOUD RDS TI ¢ 4 FM AM SRC RDM/ M.RDM/ F.SEL SCRL MENU SCN/ #1 REP/ D.REP 0 KDC-PSW9521 KDC-M907/ KDC-M9021/ KDC-8021 T rack number .
Fast Forwarding Hold down on the [ ¢ ] button. Release your finger to play the disc at that point. Reversing Hold down on the [ 4 ] button. Release your finger to play the disc at that point. Fast Forwarding and Reversing Playing discs set in the optional accessory disc player connected to this unit.
Doing Disc Search by entering the disc number . 1 Enter the disc number Press the number buttons on the remote. 2 Do Album Search Press the [FM] or [AM] button. Canceling Direct Album Search Press the [ 38 ] button. Direct Album Search (Function of disc changers with remote) Doing T rack Search by entering the track number .
Play the songs on all the discs in the disc changer in random order . Press the [M.RDM] button for at least 1 second. Each time the button is pressed the Magazine Random Play turns ON or OFF . When it's ON, "M.Random ON" is displayed. When the [ ¢ ] button is pressed, the next song select starts.
Selecting the CD displayed in the DNPS of the CDs set in the Disc changer . 1 Enter DNPP mode Press the [DNPP] button on the remote. When "DNPP" is displayed the DNPS display in order . Forward / Reverse display Press the [DISC–] or [DISC+] button.
Scrolling the displayed CD text, MP3/WMA text, or MD title. Press the [SCRL] button for at least 1 second. T ext/T itle Scroll Characters can be entered by using a remote with number buttons.
Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second.
This adjustment can be done when the <Synchronize Clock> (page 31) is set as OFF . 1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "Clock Adjust" display . Manual Clock Adjustment Setting the operation check sound (beep sound) ON/OFF .
Selecting the button illumination color as green or red. Display Setting "Button Color Green"/ "Button Green" The illumination color is green. "Button Color Red"/ "Button Red" The illumination color is red. Selectable Illumination Synchronizing the RDS station time data and this unit's clock.
Function of the KDC-PSW9521 Selecting the display font. 1 Select Font T ype Select Mode Press the [FM] or [AM] button. Select the "Font Select" display . 2 Select the font Press the [ 4 ] or [ ¢ ] button. Font T ype Select Function of the KDC-PSW9521 This function permits switching of the Icon/Spectrum analyzer display .
T oggles ON or OFF the mute control on the built-in amplifier . Tu rning ON this control enhances the preout quality . Display Setting "Builtin AMP Mute OFF"/ "AMP Mute OFF" The built-in amplifier activates. "Builtin AMP Mute ON"/ "AMP Mute ON" The built-in amplifier deactivates.
It switches automatically when a news bulletin starts even if the radio isn't being listened to. Also, the time interval when interrupt is prohibited can be set.
When poor reception is experienced, automatically switch to another frequency broadcasting the same program in the same RDS network with better reception. Display Setting "AF ON" The AF function is ON. "AF OFF" The AF function is OFF .
For selecting the display when switched to Auxiliary input source. For the Disc Naming refer to the <Disc Naming> (page 28). 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display . 2 Enter Menu mode Press the [MENU] button for at least 1 second.
Setting the timer to turn this unit's power OFF automatically when Standby mode continues. Using this setting can save the vehicle's battery power . Display Setting "OFF – – – –" Power OFF T imer function is OFF . "OFF 20min" T urns the power OFF after 20 minutes.
[VOL.] buttons Adjusting the volume. [SRC] button Each time the button is pressed the source switches. For the source switching order refer to <Selecting the Source> (page 10). [A TT] button Tu rning the volume down quickly . When it is pressed again it returns to the previous level.
[#0] — [#9] buttons When in <Direct T rack Search> (page 25) and <Direct Album Search> (page 25), enter the track/disc number . [ 4 ]/ [ ¢ ] buttons Doing track forward and backward. [DISC+]/ [DISC–] buttons Doing album forward and backward.
English — 40 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. .........1 1 .........1 3 .........1 4 1. T o prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery.
— 41 — TEL MUTE EXT.CONT P.CONT ANT.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 FRONT NON FADING REAR Front left output (White) 14 Front right output (Red) 13 Non-fading right output (Red) (KDC-PSW9521/ .
English — 42 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
— 43 — 1 Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. Accessory 4 Removal tool Screw (M4X8) (commercially available) 4 Push upward the removal tool toward the top, and pull out the unit halfway while pressing towards the inside.
English — 44 — — 44 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON.
— 45 — — 45 — T roubleshooting Guide ? Non-fading output, Non-fading Low Pass Filter and Non-fading setting can’ t be done. 28 ✔ The <Non-fading output> (page 11) is OFF . 29 ☞ Tu r n it ON. ✔ The <Dual zone system> (page 34) is ON.
MP3/WMA source ? Cannot play an MP3/WMA. 67 ✔ Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo. ☞ Use a medium conforming to ISO 9660 Level 1/2, Joliet, and Romeo. ✔ The MP3/WMA has no or invalid track name extension. 68 ☞ Add the ".
— 47 — — 47 — ? Can’ t enter Album Select mode. 101 ✔ There’ s no folder recorded in the MP3/WMA media. ☞ Use a media with levels. ? The songs in the selected folder aren’ t played in Album Select mode. 102 ✔ There are no MP3/WMA in the selected folder .
•••••••• IN (Blink): The CD player section is not operating properly . E59 ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center .
— 49 — — 49 — FM tuner section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ................................. 0.7 µV/75 Ω Quieting Sensitivity (S/N = 46dB) .............................
KDC-M907 _U.S 04.2.4 4:17 PM Page 50.
KDC-M907 _U.S 04.2.4 4:17 PM Page 51.
KDC-M907 _U.S 04.2.4 4:17 PM Page 52.
Ein wichtiger Punkt beim Kauf des Geräts Kenwood KDC-M9021 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood KDC-M9021 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood KDC-M9021 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood KDC-M9021 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood KDC-M9021 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood KDC-M9021 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood KDC-M9021 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood KDC-M9021. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood KDC-M9021 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
