Benutzeranleitung / Produktwartung KDC-BT848U des Produzenten Kenwood
Zur Seite of 71
Before reading this manual, click the button below to check the latest edition and the modified pages. IM327_Ref_K_en_00 © 2010 Kenwood Corporation All Rights Reser ved . KDC- X895 KDC-B T848U KDC- X595 KDC-448U CD-RECEIVER INSTRUCTION MANU AL T ak e the time to read through this instruc tion manual.
2 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Co nten ts Before use 4 Component names 6 F unction setting 6 F unction setting operation Audio adjustments 7 Audio control Audio preset Memor y Audio pre.
English | 3 HD R adio™ tuner control 54 Basic Operation Station preset memory Pr eset tuning Auto memor y Seek mode setting iT unes tagging Direct access tuning HD R adio setting Satellite radio tun.
4 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Before use Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to <Exit Demonstration Mode> (page 4) of Quick star t guide.
English | 5.
6 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U F unc tion setting Function setting operation Pref erences of this unit can be set in the Function setting mode. For detailed setting procedure and items, refer to the explanation for each source function.
English | 7 Aud io ad justments ⁄ • Y ou can set Bass, Middle, and T reble for each source. About Supreme T echnology to extrapolate and supplement with proprietar y algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128K bps, Sampling frequency is 44.
8 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Aud io ad justments Audio preset recall Recalling the sound setup registered by <Audio preset Memor y> (page 8) . Select the source Press the [SRC] button. Enter Audio control mode Press the Control knob.
English | 9 Music search Searching for the song you want to play . Enter Music search mode Press the [ ] button. “MUSICSEARCH” is displayed. Search for music Operation type Opera tion Movement between items T urn the Con trol knob . Move to the Alphabet search mode Press the [ ] button for at least 1 second.
10 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U iPod c ontrol operati on Related search Browsing for music of the same ar tist or genre as the one being played.
English | 11 Skip search The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected. Enter Music search mode Press the [ ] button. “MUSICSEARCH” is displayed. Enter Search selec t mo de Press the [ ] button.
12 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U iPod c ontrol operati on Registering a song in the playlist Y ou can register your favorite songs to make a playlist. Y ou can register up to ten songs in the playlist. Play the song you want to register Push the Control k nob towards up, down, right, and lef t.
English | 13 Playing the playlist Enter Search selec t mo de Press the [ ] button for at least 1 second. Select Recall playlist mode T urn the Control k nob to select “R ecall My Playlist” , and then press the Control knob.
14 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Music dis c/ Audio file ( CD or US B ) O perati on Music search Selecting the music you want to listen to from the device or media being played now . Enter Music search mode Press the [ ] button. “MUSICSEARCH” is displayed.
English | 15 Play mode Y ou can select a Play Mode, such as R andom play and Repeat play . Select CD/ USB source Press the [SRC ] button. Select the “CD” or “USB” display. Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.
16 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Music dis c/ Audio file Opera tion F unction of disc changers Basic operation of Disc changer ( Optional) Selecting CD changer source Press the [SRC ] button. Select the “CD CH” display. Music search Push the Control k nob towards right or left.
English | 17.
18 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U T uner Operation Auto memory Memorizes 18 (FM)/ 6 (AM) stations with good reception automatically . Select T uner source Press the [SRC ] button. Select the “ TUNER ” display . Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.
English | 19 F unction of remote control Direct access tuning Entering the frequency and tuning. Enter Direct access tuning mode Press the [DIREC T ] button on the remote control . “– – – –” is displayed. Enter the frequenc y Press the number buttons on the remote control .
20 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U T uner Operation PTY (Program T yp e) Selecting the Program T ype below and searching for a station; Program T ype Display Speech “Speech” Music “M.
English | 21.
22 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Log memory Log memor y item lock Locks Log memor y items to avoid them being deleted. Display the Log memory list Press the [LOG] button. Lock the Log memor y item T urn the Control k nob to select item, and then press the Control knob for at least 1 second.
English | 23 Deleting a Log memory item Deletes Log memor y items. Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd. Select the Log delete mode The item can be selected and determined as follows . “Settings” > “Log” > “Log Delete” T o select the item, turn the Control knob.
24 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Log memory T uner Log memory time setting Y ou can set the timing to log the station by the reception time. Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd. Select the T uner log time set mode The item can be selected and determined as follows .
English | 25.
26 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Displa y settings Selecting text display Changes displayed information on each of the following sources: In T uner source Information Display Fr equency .
English | 27 In Audio file/ iPod source Information Display Song T itle* “Song T itle“ Album name* “ Album Name” Artist name* “ Artist Name” Title & Ar tist name** “Title/Artist” A.
28 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Displa y settings Information display setting Sets side and graphic par ts of the display. Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd. Select the D isplay select mode The item can be selected and determined as follows .
English | 29 Display & Illumination setting Sets the display and illumination. Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd. Select Display & Illumination setting mode The item can be selected and determined as follows .
30 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U General oper ation Adjusting the Clock Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd. Select the Clock Adjust mode The item can be selected and determined as follows .
English | 31 Dual clock display Sets time for two different cities. Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd. Select the City Selec t mode The item can be selected and determined as follows . “Settings” > “Clock&Date ” > “City Select ” T o select the item, turn the Control knob.
32 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U General oper ation Auxiliary input display setting Sets the display when switched to AUX source. Select the AUX source Press the [SRC ] button. Select the “ AUX” display. Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.
English | 33 Initial setting Configures initial settings of this unit. Select Standby Press the [SRC ] button. Select the “ST ANDBY” display. Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.
34 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U General oper ation Demonstration mode S etting T urning the demonstration mode ON/OFF . Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd. Select the Demonstration mo de T urn the Control k nob to select “DEMO Mode” , and then press the Control knob.
English | 35.
36 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Operatio n of hands- free phon ing Before use KDC-X895/ KDC-BT848U • I f your cell-phone is not yet registered, register (pair) it by referring to <R egistering cell-phone> (page 8) in the Quick Star t Guide or <Registering cell-phone> (page 36) in this document.
English | 37 Receiving a call Answering a phone call KDC-X895 KDC-BT848U Press the [ ] button. KDC-X595 KDC-448U Press the Control knob. ⁄ • The following operations disconnec t the line: - I nsering a CD. - Connecting a USB device. • The name of the calling par ty is displayed if it has already been registered in the Phone Book .
38 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Calling a number in the call log Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button. KDC-X595 KDC-448U Press the [LOG] button for at least 1 second.
English | 39 Speed dialing (Preset dial) Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button. KDC-X595 KDC-448U Press the [LOG] button for at least 1 second. “BT MODE” is displayed. Select the Preset dial mode T urn the Control k nob to select “Preset Call” , and then press the Control knob.
40 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U During a call Disconnecting a Call Press the [SRC ] button. Switching to the Privat e mode Push the Control k nob towards right or left. Switches between Private talk (“PRIV A TE”) and Hands-free talk each time this button is pressed.
English | 41 Making a voice dialing call Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button. KDC-X595 KDC-448U Press the [LOG] button for at least 1 second. “BT MODE” is displayed. Enter voice recognize mode T urn the Control k nob to select “ Voic e Recognize ” , and then press the Control knob.
42 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Display s of phone number type (category) The category items in the Phone Book are displayed as follows: Display Information “ General” / General “.
English | 43.
44 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Bluetooth a udio oper ation Before Use • Y ou need to register your Bluetooth audio player before using it with this unit. For more details, see <Registering Bluetooth device> (page 46) . • Y ou need to selec t the Bluetooth audio player you wish to connect.
English | 45.
46 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Bluetooth setup Registering Bluetooth device T o make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). Y ou can register up to five Bluetooth devices to this unit.
English | 47 Registering Special bluetooth device Allow registration of a special device that cannot be register ed normally (pairing). Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button. KDC-X595 KDC-448U Press the [LOG] button for at least 1 second.
48 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Downloading the Phone b ook Download the phone book data from the cell- phone to this unit so that you can use the Phone Book of this unit. Downloading automatically If the cell-phone suppor ts a phone book synchronization function, the phone book is downloaded automatically after Bluetooth connection.
English | 49 Deleting a registered Bluetooth device Y ou can delete a registered Bluetooth device. Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button. KDC-X595 KDC-448U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.
50 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Adding a voice dialing command Add a voice tag to the phonebook for voice dialing. Y ou can register up to 35 voice tags. Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button. KDC-X595 KDC-448U Press the [LOG] button for at least 1 second.
English | 51 Setting a voice command for category Add a voice tag to the phone number category (type) for voice calling. Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button. KDC-X595 KDC-448U Press the [LOG] button for at least 1 second.
52 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Bluetooth setup F unction of KDC-X895, KDC-BT848U, KCA-BT300/B T200 (Optional Accessory) Bluetooth detail setting Configures initial settings of this unit. Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button.
English | 53 SMS ( Short Message Service ) F unction of KDC-X895, KDC-BT848U, KCA-BT300/B T200 (Optional Accessory) Displaying the SMS The SMS received by at the cell-phone is displayed on the receiver . A newly received message is displayed. ¤ • T o prevent car accidents, the driver should not read the SMS while driving.
54 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U HD Radio ™ tuner c ontrol F unction of K TC-HR300, KTC-HR200, K TC-HR100 (Optional Accessory) Basic Op eration Selecting HD Radio source Press the [SRC ] button. Select the “HD RADIO ” display . Selecting the band Push the Control k nob towards down.
English | 55 Preset tuning Recalling the stations in the memory. Enter Preset memory mode Press the [PR ESE T ] button. “Pr eset List ” is displayed. Select the numb er you want to recall from the memory T urn the Control k nob to select recall number (“1” – “6”), and then press the Control knob.
56 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U F unction of K TC-HR300 iT unes tagging By using an iT unes T agging enabled HD Radio you can tag your music. When you hear a song you enjoy on your local HD R adio station, you only have to press the Control knob.
English | 57 F unction of K TC-HR300 with remote control Direct access tuning Entering the frequency and tuning. Enter Direct access tuning mode Press the [DIREC T ] button on the remote control . “– – – –” is displayed. Select T uning item Press the [DIREC T ] button on the remote control .
58 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Satell ite ra dio tuner ( Optional a cce ssory) c ontrol Basic operation Selecting Satellite Radio source Press the [SRC ] button. Select the “SIRIUS” or “XM” display . ⁄ • Y ou need to register to the ser vice provider to receive the service by Satellite Radio.
English | 59 Channel preset memory Putting the channel in the memor y. Select the channel to put in the memor y Push the Control k nob towards right or left.
60 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Channel scan Every receivable Channel is checked for 10 seconds. Start Channel Scan Press the [ ] button f or at l eas t 1 se cond . Release it when the channel you want to listen to is receiv ed Press the [ ] button f or at l eas t 1 se cond .
English | 61 Seek mode setting Selects the tuning mode of the radio. Select T uner source Press the [SRC ] button. Select the “SIRIUS” or “XM” display . Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd. Select the Seek mode The item can be selected and determined as follows .
62 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Basic oper ations of remote c ontrol A T T 0 — 9 SRC VOL FM AM EXIT 5 / ∞ AUD ENT DIRECT General control • V o lum e contr ol: [ VOL] • Source s el ec tio n: [SRC] • V o lum e red uc tio n: [ATT] When the button is pressed again, the volume returns to the previous level.
English | 63 In S atellite radio tuner source • Band se le c tion: [FM] • Channe l sel ec ti on: [ 4 ]/ [ ¢ ] • Reca ll pre set c hann els : [1 ] — [6 ] Hands-free phone control Making a call.
64 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U Appendix About Audio file • Playable Audio file AAC-L C (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/R W/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
English | 65 About “KENWOOD Music Editor” • This unit suppor ts the PC application “KENWOOD Music Editor Light ver1.1” or later . • When you use the audio file with database information added by the “KENWOOD Music Editor Light ver1.1” , you can search a file by title, album or artist name using the <Music search> (page 14) .
66 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U T roubleshooting guid e Some func tions of this unit may be disabled by some settings made on this unit.
English | 67 No Music Data/Error 15: • The connected USB device contains no playable audio file. • Media was played that does not have data recorded that the unit can play. USB ERROR: Some trouble may have occur red to the connected USB device. Remove the USB device, then cycle the power switch to ON.
68 | KDC-X895/ KDC-BT848U/ KDC- X595/ KDC-448U FM tuner sec tion Fr equenc y range (200 kHz step) : 87.9 MH z – 107.9 MHz Usable sensitivit y (S/N = 26dB) : 11.
English | 69 Auxiliary input Fr equenc y response (±3 dB) : 20 H z – 20 kH z Input Maximum Voltage : 1200 mV Input Impedance : 10 kΩ General Operating voltage KDC-X895/ KDC-BT848U : 14.
.
2 CAUTION Use of controls or adjustments or per formance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety .
Ein wichtiger Punkt beim Kauf des Geräts Kenwood KDC-BT848U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood KDC-BT848U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood KDC-BT848U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood KDC-BT848U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood KDC-BT848U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood KDC-BT848U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood KDC-BT848U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood KDC-BT848U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood KDC-BT848U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
