Benutzeranleitung / Produktwartung DPX-MP4100 des Produzenten Kenwood
Zur Seite of 32
DU AL DIN SIZED CD/CASSETTE RECEIVER DPX-MP4100 INSTR UCTION MANU AL © B64-3609-00/00 (MW) B64-3609-00_English_r5.indd Sec1:1 B64-3609-00_English_r5.indd Sec1:1 06.
2 | English Con tents Safety precautions 3 Notes 4 General featur es 6 Pow er Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail of Audio Contr ol Audio Setup Speaker S.
English | 3 Safety precautions 2 W ARNING T o prev ent injur y or fire, tak e the following precautions: • T o prevent a short circuit, never put or leav e any metallic objects (such as coins or metal tools) inside the unit. • Mounting and wiring this product requires skills and experience.
4 | English • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters in the L CD may become difficult to read in temperatures below 5 ˚C (41 ˚F).
English | 5 About Audio file • Playable Audio file AAC (.m4a), MP3 (.mp3), WM A (.wma) • Playable disc media CD-R/R W/ROM • Playable disc file forma t ISO 9660 Level 1/2, Joliet, Romeo, L ong file name.
6 | English General fea tures Powe r T urning ON the Pow er Press the [SRC] button. T urning OFF the Pow er Press the [SRC] button for at least 1 sec ond.
English | 7 When the Attenuator is ON, the " A T T" indicator blinks. Sy stem Q Selecting the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [ Q] button.
8 | English General fea tures 4 Adjust the Detail Audio item T urn the [ VOL] knob. Bass level Adjustment Item Display Range Bass Cent er Frequency "BasF" 40/50/60/70/80/100/ 120/150 Hz Bass Q F actor "BasQ" 1.
English | 9 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standb y Press the [SRC] button. Select the "ST ANDBY" display. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Speaker type T urn the [ VOL] knob.
10 | English General fea tures Subw oofer Output T urning the Subwoofer output ON or OFF . Push the Contr ol knob toward down for at least 2 seconds. Each time you push the knob, Subwoofer output switches ON and OFF . When it is ON, "SubW ON" is displayed.
English | 11 Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD . 1 Receive/pla y the station/disc you want to attach a title to ⁄ • A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Press the [MENU] button f or at least 1 second.
12 | English T uner fea tures T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
English | 13 Station Pr eset Memory Putting a station in the memory. 1 Select the band Push the Contr ol knob towards [FM] or [ AM]. 2 Select the frequency to put in the memor y Push the Contr ol knob towards [ 4 ] or [ ¢ ]. 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds.
14 | English Cassette pla yer fea tures Playing C assette T apes When the Cassette T ape is inser ted Press the [SRC] button. Select the " T APE" display . ⁄ • When there is a Cassette Tape inserted, the indicator is ON. When you w ant to listen to the reverse side Press the C ontrol knob.
English | 15 Selecting the T ape type Press the [M TL] button. Each time you press the button, the T ape t ype alternates between the tape types shown in the table below .
16 | English CD/Audio file/External disc contr ol featur es Playing CD & A udio file When a disc is inserted Press the [SRC] button. Select the "CD" display. ⁄ • When a CD is inserted, the indicator is ON. Pause and play Press the C ontrol knob.
English | 17 F ast Forwarding and Reversing F ast Forwarding Hold down towar d [ ¢ ] with the Control knob . Release to resume the playback. Reversing Hold down towar d [ 4 ] with the Control knob . Release to resume the playback. ⁄ • There is no sound while the Audio file is being searched.
18 | English CD/Audio file/External disc contr ol featur es Scan Play Playing the first part of each music on the disc or Audio file folder y ou are listening to and searching for the music you want to hear . 1 Start Sc an Play Press the [SCAN] button.
English | 19 T ext/Title Scroll Scrolling the displayed CD text, A udio file text, or MD title. Push the Contr ol knob toward up for at least 2 seconds.
20 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
English | 21 ⁄ • Y ou can set the Secur ity Code with a 4 digit number of your choice. • The Security Code cannot be displayed or refer enced. Make a note of the Security Code and treasure it up. 1 Enter Standb y Press the [SRC] button. Select the "ST ANDBY" display.
22 | English Menu system In Standby mode Con trast Adjustmen t Adjusting the display contrast. Display and Setting "CONT 1" … "CONT 6" ( Original setting) … "CONT 11" In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Contr ol knob towards up or down.
English | 23 In Standby mode DSI (Disabled Sy stem Indicator) A red indicator will blink on the unit after the AC C is set to OFF , warning potential thieves.
24 | English Auxiliary Input Display Setting & Station/Disc Naming Selecting the display when changing to Auxiliary input source. F or the Station/Disc Naming refer to the <Station/Disc Naming (SNPS/DNPS)> (page 11). 1 Select Auxiliary input source Press the [SRC] button.
English | 25 Basic Operations of r emote contr ol Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case.
26 | English Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. ⁄ • Refer to <Audio C ontrol> (page 7) for the operation method, such as the procedures f or Audio control and others operations.
English | 27 Ac cessories 1 ..........1 2 ..........1 3 ..........6 4 ..........6 Installation Proc edure 1. T o prevent a shor t circuit, r emove the key from the ignition and disconnect the - battery. 2. Mak e the proper input and output wir e connections for each unit.
28 | English Connecting W ires to T erminals – + P .CONT MUTE ANT . CONT ILLUMI EXT .CONT . FRONT L FRONT R REAR L REAR R FM/AM antenna input Fr ont left output ( White) Fr ont right output (Red) F .
English | 29 Installation Install onto the car bracket using the supplied screws (M5 × 7 mm, M5 × 6 mm). The holes of the car bracket to use will differ depending on the car model. Accessory 2 (Only for NISSAN car) Car Bracket Accessory 3 (M5 × 7 mm) or Accessory 4 (M5 × 6 mm) B64-3609-00_English_r5.
30 | English Some functions of this unit may be disabled by some settings made on this unit. ! Cannot switch to A ux source. ▲ AUX is not turned on. ☞ <Built-in Auxiliary input Setting> (page 22) ! • Cannot set up the subw oofer . • No output from the subwoofer .
English | 31 Cassette tape sourc e ? The sound quality is poor or distorted. ✔ The tape head is dirty. ☞ Clean the tape head. ? The DPSS, T ape Advance and Music Repea t don’t operate c orrectly. ✔ The space between the songs on the tape can ’t be recognized because it’ s too shor t.
32 | English Specifications Specifications subject to change without notice. FM tuner section Fr equency range 50 kHz space: 87.5 MHz – 108.0 MHz 200 kHz space: 87.9 MHz – 107.9 MHz Channel Space Selection : 50 k/200 kHz Usable sensitivity (S/N = 30dB) : 9.
Ein wichtiger Punkt beim Kauf des Geräts Kenwood DPX-MP4100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood DPX-MP4100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood DPX-MP4100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood DPX-MP4100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood DPX-MP4100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood DPX-MP4100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood DPX-MP4100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood DPX-MP4100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood DPX-MP4100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
