Benutzeranleitung / Produktwartung 116.30912 des Produzenten Kenmore
Zur Seite of 20
116.30912 116.31912 116.31913 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com C01ZBAZ30U_0-8175058.
Before Using Your New Vacuum ........ 2 Kenmore Vacuum Cleaner Warranty ,, • 2 Important Safety Instructions ............ 3 Upright Vacuum Cleaner Parts and Features ................................ 4 Assembly Instructions ................. 5-6 Operating Instructions .
WARNING Your safety is important to us, To reduce the risk of fire, electrical shock, injury to persons or damage when using your vacuum cleaner, follow basic safety pre= cautions including the following; Read this manual before assembling or using your vacuum cleaner.
It is important to know your vacuum cleaner's parts and features to assure its proper and safe use° Review these before using your cleaner. Item Part No.
WARNING Electrical Shock Hazard Do not plug Into the electrical sup- ply until the assembly is complete,, Failure to do so could result in elec- trical shock or injury° i i ii iNil,,,ll ii Before assembling vacuum, check the PACKING LIST on the cover of the separate Repair Parts List.
Using a screwdriver, tighten the screw. Do not overtighten. Overtightening could strip the screw holes. Do not operate the cleaner without the screw in place, CORD ASSEMBLY Make sure the quick release upper cord hook is in the upright position,, Remove the wire tie from the power cord.
Release the handle by pressing down on the handle release pedal with your foot and pulling back and down on the handle with your hand. Note: The agitator will not rotate if the vacu- um cleaner is in the upright position.
OFF Position: Step on the back half of the pedal to turn off the agitator for use on bare floors.. In the OFF position, the agitator does not rotate_This setting should be used for cleaning hardwood and tile floors Note: The light will remain on when vacu- uming with the agitator in the OFF Position, provided the vacuum is not fully upright.
The attached hose swivels to make cleaning swivel- easier in every direction. Remove the Hose hose from the clip hose clip by pulling straight out, TELESCOPING WAND WITH SUCTION CONTROL SLIDE SOME MOD.
TO STORE ATTACHMENTS Remove dusting brush or combination brush, Snap into appropriate storage loca- tion, Remove crevice tool from the wand by twist- ing.
CLEANING AREA ATTACHMENT DUSTING BRUSH CREVICE TOOL S CC IINATION BRUSH Hanc -Mate ® Jr. Furniture* Between Cushions* Drapes* x X x x X x X x Stairs *Always clean attachments before using on fabrics Walls X Pivoting Brushes Carpet edges Guide either side or the front of the noz- zle along a base- board.
MOTOR PROTECTION SYSTEM Motor Protector This vacuum has a motor protector by-pass valve which automatically opens to provide cooling air to the suction motor when a clog prevents the normal flow of air to the motor.
DIRT SENSOR SOME MODELS The electronic dirt sensor is a feature which will detect particles as they pass through the vacuum cleaner. The dirt sensor indicators and sensor sensitivity switch are located on the front of the switch cover A red light indicates dirt is being picked up by the cleaner.
Always follow all safety precautions when cieaning and servicing the vacuum cleaner. WARNING Electrical Shock And Personal injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting.
TO REMOVE DUST BAG TO REPLACE DUST BAG Pull out on the bag cover release located near the top of the bag cover, Grasp the dust bag collar and pull gently, carefully removing the dust bag° Throw away the used dust bag. Do not reuse. Pull the bag cover forward and lift up.
Check motor safety filter frequently and change when dirty WARNING Electrical Shock Hazard Unplug power cord from electrical outlet. Do not operate the cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure and/or electrical shock.
WARNING Electrical Shock Or Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the uniL Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting. ii ii ii iiiii i TO REMOVE LIGHT BULB Disconnect power cord from electrical out- let.
Always follow all safety precautions when cleaning and servicing the vacuum cleaner_, ! WARNING .............. Electrical Shock Or Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting.
Review this chart to find do.it-yourself solutions for minor performance problems, Any serv}ce needed, other than those described in this owner's manual, should be performed by an autho- rized service representative, .............................
For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME ® Anytime, day or night (1-800-469-4663) (USA° and Canada) www.sears.com www.sears.ca For repair of carry-in products like vacuums, lawn equipment, and electronics, call for the nearest Sears Parts and Repair Center.
Ein wichtiger Punkt beim Kauf des Geräts Kenmore 116.30912 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenmore 116.30912 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenmore 116.30912 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenmore 116.30912 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenmore 116.30912 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenmore 116.30912 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenmore 116.30912 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenmore 116.30912. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenmore 116.30912 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
