Benutzeranleitung / Produktwartung 116.23637C des Produzenten Kenmore
Zur Seite of 21
Owner's Manual Manuel De L'utilisateur Vacuum Cleaner Aspirateur Model, Mod_.le 116.23637C CAUTION: Read and follow all safety and operating instructions before first use of this product. AVERTISSEMENT: Lisez et suivez.toutes les instructions de s_curit_ et d'op_ration avant de vous servir de ce produit.
Before Using Your New Vacuum ........ 2 Kenmore Vacuum Cleaner Warranty .... 2 Important Safety Instructions ........... 3 Parts and Features ................. 4-5 Assembly Instructions ............... 6-7 USe ................................ 8 How to Start .
Your safety is important to us. To reduce the risk of fire, electrical shock, injury to per- sons or damage when using your vacuum cleaner, follow basic safety precautions Including the following: Read this manual before assembling or using your vacuum cleaner.
It is important to knowyour vacuum cleaner's parts and features to assure its proper and safe use. Review these before using your cleaner. Item PartNo. PartNo. In U.S. In Canada Headlight Bulb 20-5240 596181 Belt 20-5201 20-40979 Cord and _ i Cord I Holder_ U.
HOSE 3-Way On/Off Switch Off/Floor/Carpet Crevice Tool Combination Brush Floor Brush A'I-I'ACHMENTS Power-Mate Jr. = (Some Models) Handi-Mate Jr.
WARNIN G I I Electrical Shock Hazard I DO NOT plug Into electrical supply I until assembly is complete. Failure to I do so could result in electrical shock or I mjury. Before assembling your vacuum cleaner, be sure you have all parts shown in PARTS AND FEATURES.
HOSE 1. Line up the hose latch tab with notch in canister and insert hose into canister until it snaps in place. To remove: Press hose latch tab and pull hose out, Hose Latch Tab Notch Handle ---_ Handle II_ Release_ 2. Insert handle into wand until lock button snaps in place.
HOW TO START ! WARNING Personal Injury and Product Damage Hazard • DO NOT plug in if switch is in ON position. Personal Injury or damage could result. • The cord moves rapidly when rewinding. Press cord rewind with foot only. Keep children away - and provide a clear path when rewinding the cord to prevent personal injury.
Suggested sweeping pattern. For best cleaning action, the Power-Mate ® should be pushed straight away from you and pulled straight back. At the end of each pull stroke, the direction of the Power-Mate ® should be changed to point into the next section to be cleaned.
, A'I-I'ACHMENTS ON WANDS CAUTION ATTACHMENTS ON HANDLE NOTE: If the Power-Mate ® is attached, turn cleaner off before removing handle from wands. I Upper Wand 1. Press lock button, then pull to remove han- dle from wand. If your model has the optional feature of a handle release, press it in similarly.
EDGE CLEANER Active brush edge cleaners are on both sides of the Power-Mate ® . Guide either side of the Power-Mate ® along base-boards or next to furniture to help remove dirt trapped at carpet edges. OVERLOAD PROTECTOR The Power-Mate ® has built-in protection against motor and belt damage should the brush jam.
The vacuum cleaner creates suction that picks up dirt. Rapidly moving air carries the dirt to the dust bin through the /'r L_'_-_ airflow passages, The dust bin lets ,//z,,."_-"-_4 the air pass through, while it traps J//" the dirt.
Always empty the dust bin when dirt level reaches the "MAX FILL" line. TO REMOVE DUST BIN: Press down on the dust bin release tab locat- ed above the handle of the dust bin. dust bin is removed, rotate cleaning knob on top of dust bin at least two complete revolutions to clean filter and maintain cleaning perfor- mance.
! WARNING Electrical Shock Hazard Unplug power cord from electrical out- leL Do not operate the cleaner without the primary or exhaust filters. Be sure the filters are properly installed to pre- vent motor failure and/or electrical shock. PRIMARY FILTER Check primary filter frequently and clean when dirty.
SECONDARY FILTER FOAM Electrical Shock Hazard Do not operate the cleaner without the motor safety filter. Be sure the tilter is properly Installed to prevent motor fail- ura and/or electrical shock.
Always follow all safety precautions when cleaning and servicing the Power-Mate _, ! WARNING Electrical Shock Or Personal Injury Hazard Disconnect alectrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner sud- denly starting.
TO CLEAN AGITATOR NOTE: In order to keep cleaning efficiency high and to prevent damage to your vacu- um, the agitator must be cleaned every time the belt is chart eqe#_d.
1. Remove Power-Mate ® cover as shown in BELT CHANGING AND AGITATOR CLEAN- ING section. _Push In 3. Push in and turn And Turn bulb clockwise, to replace. Bulb must not be higher than 15 Watts(130 Volts). Push In And Turn i_.._ 2. Push in and turn bulb counterclock- wise, then pull out to remove.
• _ _ _ i_! !lm Review this table to find do-it-yourself solutions for minor performance problems. Any service needed, other than those described in this owner's manual, should be performed by an autho- rized Sears Service Center. Cleaner won't start.
2O.
Your Home iiiiii!;iii!iii!_i_ _ For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
Ein wichtiger Punkt beim Kauf des Geräts Kenmore 116.23637C (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenmore 116.23637C noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenmore 116.23637C - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenmore 116.23637C reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenmore 116.23637C erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenmore 116.23637C besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenmore 116.23637C verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenmore 116.23637C. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenmore 116.23637C gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
