Benutzeranleitung / Produktwartung UFC 662sw des Produzenten Kathrein
Zur Seite of 60
Operating manual DVB cable receiver UFC 662sw.
2 PREF ACE Dear customer , this Operating Manual is intended to help you make the fullest use of the extensive range of functions offered by your new cable receiver . We have tried to make the operating instructions as easy as possible to understand, and to keep them as concise as possible.
3 IMPORT ANT INFORMA TION The channels available on the cable network are subject to continual change. When such changes occur it is necessary to reset the channels. The information for these settings can be found on the Internet or in relevant magazines.
4 CONTENTS PREF ACE .............................................................................................................................. ... 2 IMPORT ANT INFORMA TION ..........................................................................
5 CONTENTS ST ART BLOCKSELECTION (HIGHLIGHTING SEVERAL CHANNELS) .............................................. 37 EDIT TV -CHANNELLIST ......................................................................................................... 38 REMOVE FROM F A VOURITES LIST .
6 SAFETY INSTRUCTIONS - IMPORT ANT INFORMA TION Mains cable Make sure that the mains cable (power supply cable) is not damaged. Units with a damaged mains cable must be disconnected from the mains (unplug it at the socket) and repaired by an electrical specialist before setup.
7 Periods of extended absence, thunderstorms, mains socket accessibility In order to disconnect the unit from the mains completely , the mains plug must be unplugged from the wall socket! Therefore in.
8 RECEIVER FEA TURES/SCOPE OF SUPPL Y The UFC 662sw receiver is suitable for the reception of digital cable TV and radio channels. The HDMI interface offers the optimum capability for connecting the receiver to a fl at-screen TV set. The built-in up-scaler processes the picture optimally for fl at-screen TV sets.
9 FEA TURES FEA TURES Reception of digital cable TV and radio channels HDMI output for good picture quality on your fl at-screen TV set Up-scaler for upscaling the Pal signal (576i) to 57.
10 CONTROLS, DISPLA YS AND CONNECTIONS This section provides a brief description of all the controls, displays and connections. Front Panel Controls and Displays 1. On/Off switch 1) 2. Channel select buttons ( ▼▲ ) 3. Display Rear Panel Controls and Displays 1.
11 CONNECTION AND SETUP The following section is intended speci fi cally for specialist dealers. Y ou need not refer to this section unless you are carrying out the installation yourself. The “Connection examples” section provides a sample con fi guration.
12 Scart Scart Digitalton AC 3 elektrisch Infrarot-Empfänger (optional) CONNECTION EXAMPLE CONNECTION AND SETUP Dolby Digital system Infra-red receiver (optional) Digital audio AC 3 electrical HiFi s.
13 CONNECTION AND SETUP If you want to play the sound on your hi- fi system, connect the audio cinch sockets to the input sockets on the hi- fi system, using an appropriate cable (see “Connection example”). The electric digital output is intended for the connection of a Dolby Digital system (see “Connection example”).
14 REMOTE CONTROL " Sound on/off ... Numeric input for channels, timers etc. Open the main menu, leave the menu and return to the TV picture # F A V (red) Call up favourites selection.
15 FIRST INST ALLA TION Before using your receiver for the fi rst time, read the “Safety Instructions” and “Connection and Setup” sections. The “Connection examples” section provides a sample con fi guration. Do not connect the receiver to the power supply until all installation work has been properly carried out.
16 Use the @ buttons here to select the settings for your TV set. When doing this, refer to the operating instructions for your TV set! TV aspect ratio Here you can select the TV picture format.
17 FIRST INST ALLA TION Picture format Here you can select the type of screen display , depending on the setting of your TV format: - TV format “4:3”: Pan & Scan or Letterbox - TV format “16:9”: “automatically” or “always 16:9” TV -SCART -Output Select the type of video signal at the TV Scart socket here.
18 Local time offset Use the buttons to set the local time offset from UTC (formerly GMT) (e.g. for Great Britain +0 hours). Use the buttons to switch to the “Automatic clock change” fi eld. Use the buttons to select whether the receiver should automatically change over to and from summer and winter time.
19 OPERA TING INSTRUCTIONS The structure of the menu concept is based on logical operating sequences. The programme showing on the current selected channel always appears in the top right-hand corner of the screen.
20 MENU OVERVIEW OPERA TING INSTRUCTIONS Mainmenu Open the menu by pressing the button.
21 OPERA TING INSTRUCTIONS The language for the on-screen display is set as follows: → → Language setting → → → English → Available options: German, English, Italian, French, Dutch, Spanish, Czech and Turkish. After you have performed the settings, press the or button to exit the main menu.
22 ON-SCREEN DISPLA YS (OSD) Channel information is shown for a few seconds each time the channel is changed (this can be changed under “Settings”, “Suit screen menu”).
23 Press the % (yellow) button once to view further soundtrack selection options, if these are transmitted by the channel provider . Use the buttons to scroll through the available selection options. Press the % (yellow) button again, or press the button to exit this display again.
24 Underneath you can see the channel list with the sort order you selected. The channel list can display channels sorted by various selection and sorting criteria. Selection and sorting options: - Press the # (red) button to open the favourites list selection.
25 EPG - ELECTRONIC PROGRAMME GUIDE CALLING UP THE EPG The EPG is opened by pressing the button. Each time the EPG is opened, you will automatically be shown the “Preview” view , irrespective of which view you were shown the last time you left the EPG.
26 EPG - ELECTRONIC PROGRAMME GUIDE Selection options: - # (red) button Open the T imer list (display of all pre-programmed recordings) - % (yellow) button Calling up the “Preview” view - $ (green.
27 “PREVIEW” VIEW (PROGRAMME LISTINGS) The “Preview” view (programme listings) can be called up at any time in EPG by pressing the % (yellow) button. EPG - ELECTRONIC PROGRAMME GUIDE In the “Preview” view you will see all the programmes that will be shown in the previous “Current” list of selected channels.
28 EPG - ELECTRONIC PROGRAMME GUIDE ADDITIONAL INFORMA TION (i BUTTON) The additional information can always be called up by pressing the ! button whenever the “i symbol” appears in front of the programme name (see screenshot on the right). First however the channel must be selected.
29 RECORDING (TIMER) The (red dot) button allows you to set up a programme at any time for recording on an external recorder . The programme to be recorded can be selected in any of the EPG views, provided the (red dot) button appears at the bottom of the screen display .
30 EPG - ELECTRONIC PROGRAMME GUIDE ONCE-ONL Y RECORDING Use the buttons to select the recording mode “once” (see screenshot “Recording (timer)” section). Use the buttons to switch to the “Date” fi eld and use the buttons to select the desired recording day .
31 RECORD WEEKL Y Use the buttons to select the recording mode “weekly” (see screenshot below). Then use the buttons to switch to the selection fi eld “Start” and use the buttons or the number keys to select the desired recording start time.
32 EPG - ELECTRONIC PROGRAMME GUIDE TIMER LIST VIEW The T imer list view can be called up at any time in EPG by pressing the # (red) button. The T imer list view shows you all the recordings that are scheduled. The buttons allow the recordings to be sorted into “once” or “repeated” recordings.
33 VIDEOTEXT (TELETEXT) This symbol in the channel information shows you whether T eletext is available for the selected channel. When you press the button, the receiver processes the Videotext/T eletext service data for your TV set to display , even when the signal is encrypted.
34 EDIT TV -CHANNELLIST Select the “Edit TV -Channellist” menu using the button, the buttons on the main menu and . When the menu is opened, the standard setting is for the receiver to show the channel list with all channels available (overall list).
35 EDITING LISTS/CHANNELS When you have selected the channel or channel list to be edited, press the (red dot) button to open the edit menu. Y ou have the following edit options: - Move: Channel c.
36 DELETE CHANNELS Use the buttons to select the channel to be deleted from the channel list you have selected. Press the button to open the edit menu and use the buttons to select the “Delete” function. Con fi rm the command by pressing the button.
37 LOCK CHANNELS Use the buttons to select the channel to be locked from the channel list you have selected. Press the button to open the edit menu and use the buttons to select the “Lock” function. Con fi rm the command by pressing the button.
38 EDIT TV -CHANNELLIST EDIT F A VOURITES LISTS When you have selected the favourites list to be edited (called up using the # (red) button and selected using the buttons), press the (red dot) button to open the edit menu.
39 LOCK CHANNELS Use the buttons to select the channel to be blocked in the favourites list you have selected. Press the button to open the edit menu and use the buttons to select the “Lock” function. Con fi rm the command by pressing the button.
40 SEARCH CHANNELS (CHANNEL SEARCH) Select the “Search Channels” menu using the button, the buttons in the main menu and . Y ou have three options for a channel search.
41 The buttons allow you to select different sets of parameters for the search. Channel Search Mode Use the buttons to select whether you wish to search “free and scrambled” or “only free” channels. Use the buttons to select “Start Search” and press the button to start searching.
42 MANUAL (CHANNEL) SEARCH SEARCH CHANNELS (CHANNEL SEARCH) The buttons allow you to select different sets of parameters for the search. Start frequency Use the buttons to select the start frequency for the search. Stop frequency Use the buttons to select the end frequency for the search.
43 SEARCH CHANNELS (CHANNEL SEARCH) Press the button. Y ou will be asked whether you wish to save the changes or not. Selection is performed using the buttons and is con fi rmed by pressing the button. If you select “Y es, save changes”, the newly found channels will be added to the end of the channel list.
44 SEARCH CHANNELS (CHANNEL SEARCH) After completion of the search, you will see the following message (example): Press the button. Y ou will be asked whether you wish to save the changes or not. Selection is performed using the buttons and is con fi rmed by pressing the button.
45 P ARENT AL CONTROL Select the “Parental Control” menu using the menu button , the buttons on the main menu and . Y ou are now prompted to enter the PIN code (factory default setting: 0000). Select the parameters to be changed using the buttons.
46 SETTINGS The selected menus, sub-menus and items, as well as the parameters to be set, are each marked in colour . The menus are largely self-explanatory . Note the bar at the bottom of the on-screen display . These provide information on what to do next.
47 FIRST INST ALLA TION See “First Installation” section. REGION SETTINGS Use the buttons here to select whether you wish to use the factory pre-programmed channel listing for the selected country . This function is however active only if you select the setting “On” for “Logical Channel Number” in the next line.
48 Here you can use the buttons to select the type of video signal at the TV Scart socket. Select the signal that your TV set can process. When doing this, refer to the operating instructions f.
49 SETTINGS SUIT SCREEN MENU Here you can con fi gure the functional scope of your receiver . Y ou can choose between “Complete”, “Simple” and “Medium”. The following table shows which functions are available at each con fi guration step.
50 SETTINGS DA TE AND TIME COMMON INTERF ACE Local time offset Use the buttons to set the time zone variation from UTC (formerly GMT) (e.g. for Great Britain + 0 hours). Use the buttons to switch to the “Automatic clock change” fi eld.
51 SETTINGS Inserting the CA module into the CI The Common Interface (CI) of the UFC 662sw is suitable for insertion of a CA (Conditional Access) module and is located at the rear of the receiver .
52 SETTINGS Information for Conax, SECA, Viaccess and CryptoW orks users: Note that with monthly activation intervals, the channel providers have different procedures for activating pay TV cards. Activation may therefore be a few days before or after the beginning of a new month.
53 SER VICE MENU Select the “Service” menu using the button, the buttons in the main menu and . The following display appears: Current software version Last update run Hardware version Date of the channel list F ACTOR Y RESET Select the “Service” menu using the button, the buttons in the main menu and .
54 CONNECTING UP THE VIDEO/PVR For details of how to connect an external recorder to the PVR, refer to the connection diagram in the “Connection and Setup” section in this manual, and to the instructions for the external recorder .
55 USING THE FRONT P ANEL/SERVICE If you have misplaced your remote control, or if the batteries are fl at, you can still operate your receiver from the front panel. BACKUP OPERA TION There are three buttons on the front of the receiver: Power switch 1) (On/Off): The power switch allows you to switch the receiver on (operation) and off again.
56 TECHNICAL APPENDIX T ype UFC 662sw Part no. 20210150 Colour Black RF properties Input frequency range MHz 47-862 Input level range dBµV 46-86 Demodulation QAM 16, 32, 64, 128, 256 TV system, video.
57 Signal Pin no. TV VCR/AUX Right audio output 1 X X Right audio input 2 X Left audio output 3 X X Audio earth 4 X X Blue earth 5 X X Audio left input 6 X Blue signal 7 X X Switching voltage 8 X X Gr.
58 SHORT TECHNICAL GUIDE AC 3 Output for Dolby Digital signal A V programme pos. Preferred programme slot on TV set for external connections such as Scart and HDMI CAM – Conditional Access Module Decryption decoder , which uses a smart card to decrypt the encrypted radio and TV signals.
59 SHORT TECHNICAL GUIDE Scart cable 21-pin connecting cable (e.g. receiver/TV) Smart card Card from Pay TV provider to decrypt its channels Stand-by Standby mode Symbol Rate The symbol rate describes the quantity of data that is transmitted per second.
TROUBLESHOOTING Internet: http://www .kathrein.de KA THREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 P .O. Box 100 444 • 83004 Rosenheim GERMANY 936.3 7 19/-/01 10/ZWT - T echnical data subject to change. In the event of a malfunction, fi rst check all the cable connections and operating states: 1.
Ein wichtiger Punkt beim Kauf des Geräts Kathrein UFC 662sw (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kathrein UFC 662sw noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kathrein UFC 662sw - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kathrein UFC 662sw reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kathrein UFC 662sw erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kathrein UFC 662sw besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kathrein UFC 662sw verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kathrein UFC 662sw. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kathrein UFC 662sw gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
