Benutzeranleitung / Produktwartung VN-C11 des Produzenten JVC
Zur Seite of 32
READ ME FIRST V .NETW ORKS L WT0105-001A VN-C11 For Customer Use: Enter below the Serial No . which is located on the body . Retain this information f or future reference . Model No . VN-C11 Serial No . This READ ME FIRST is made from 100 % recycled paper .
2 PORTABLE CART WARNING (symbol provided by RETAC) S3125A IMPORT ANT SAFEGU ARDS 1. Read all of these instructions. 2. Sav e these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet bef ore cleaning.
3 Safety Pr ecautions CA UTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NO T REMOVE CO VER (OR BACK). NO USER-SER VICEABLE P ARTS INSIDE.REFER SER VICING T O QU ALIFIED SER VICE PERSONNEL.
4 Contents ................................................................................................. 4 F eatures ................................................................................................. 5 Items Included ...............
5 CD-ROM (The PDF instruction manual inside) Read Me First W arranty Card Service Information Card Features Introduction • VN-C11 uses a 1/3-inch CCD with 380,000 pix els, enabling monitoring of high quality images . •F or the compression method, in addition to the standard JPEG, VN-C11 supports MPEG4 for a wide range of bit rates .
6 Required Operating Envir onment Upgrading the Application F or inf ormation on upgrading the application, visit the f ollowing website . http://www .
7 Operating Precautions ● VN-C11 designed f or indoor use. For outdoor use, prepare a proper housing to co ver and protect the camera. ● The product should not be installed or used in the f ollowing locations. • Locations subject to rain or w ater .
8 Controls, Connectors and Indicators (Front, top and side vie ws) 1 Lens mount The mount f or attaching a lens. Either a C- mount or a CS-mount lens can be used. 2 Back-f ocus adjustment ring The ring for adjusting bac k-f ocus and chang- ing the mount method.
9 (Side and rear views) Controls, Connectors and Indicators (continued) 9 V entilation opening F or the inter nal cooling fan. Install the cam- era in a w ay that does not co ver the opening. 0 [RESET] b utton Press this button to reset VN-C11. If this but- ton is held down f or 2 seconds or longer , the v alues set with [V .
10 Connection Examples Network Connection P eer -to-P eer Connection VN-C11 VN-C11 LAN INTERNET PC PC Images are automatically updated at a regular interval.
11 Set the camera in the follo wing procedure. Preparation Pr ocedure ❈ If multiple PCs are in use, first turn on the power f or one PC and proceed to Other Settings with V .Networks Setup T ool. Only then, turn on the power to a second PC and go on to Other Settings with V .
12 RESET IRIS (a) (b) F 3 4 2 1 3. 2. 1 3 2 4 Attaching a Lens Attach a lens in the f ollowing procedure. 1. Bef ore attaching a lens, chec k the mount method of the lens.
13 CLASS 2 ONL Y For USA ISOLA TED POWER ONL Y For EUROPE POWER MONITOR OUT 10BASE-T/100BASE-TX For USA DO NOT CONNECT TO THE TELEPHONE NETWORK G 2 2 1 1 OUT COM ALARM DC12V AC24V OUTPUT INPUT PUSH Power indicator lamp To Power Connect the camera to DC 12 V or A C 24 V .
14 Connecting a LAN Cable Connect the camera to a hub or a PC b y using a LAN cable. Note F or 100 BASE-TX, use a CA T -5 cable. 2 1 CLASS 2 ONL Y For USA ISOLA TED POWER ONL Y For EUROPE POWER MONITO.
15 Installing the Camera [Fall Pre vention] W ARNING • Special care is required if the camera is installed on a w all or ceiling. Y ou should not attempt to install it by y ourself as it ma y cause injury or an accident. This installation work should be carried out only by qualified and e xperienced personnel.
16 Installing the Software Installing V .Netw orks Controller 1. Select [Setup.e x e] found in the [JVC] f older . 2. Proceed by f ollowing the instructions sho wn on the screen. 3. If the installation is successfully ex ecuted, the [V .Networks] icon is created in [Programs] of the Windows [Start] menu.
17 Setting the PC’ s IP Address for Windows XP After attaching the camera, proceed to set the IP ad dress of the PC b y which the camera is operated. With Windows XP , f ollow the pr ocedure below to set the IP ad dress. (For Windows 2000, ☞ P age 19) Ensure that [Client f or Microsoft Networks] is selected .
18 Setting the PC’ s IP Addr ess for Windows XP (continued) 3. Select [Internet Pr otocol (TCP/IP)] and click [Pr operties]. 4. Select [Use the f ollowing IP address] to set [IP Ad dress] and [Subnet Mask] and then clic k . Select [Internet Protocol (TCP/IP)].
19 Setting the PC’ s IP Address for Windows 2000 After attaching the camera, pr oceed to set the IP address of the PC b y which the camera is operated. With Windows 2000, follo w the procedure belo w to set the IP address. 1. Click . Select [Settings] and click [Control P anel].
20 Setting the PC’ s IP Addr ess for Windows 2000 (continued) Select [Use the follo wing IP Address]. 4. Clic k [IP Address] in [TCP/IP properties]. 5. Click . Set the IP address to “192.168.0.3. ” Set [Subnet mask] to an appropriate value according to the operating en vironment.
21 Setting the IP Address for VN-C11 with V .Networks Setup T ool Set the IP address for VN-C11 b y using the installed [V .Networks Setup T ool]. (With this [V .Networks Setup tool] only VN-C11, not other models, can be connected.) Note Click [Search] to see the IP address of the connected camer a.
22 Setting the IP Address for VN-C11 with V .Networks Setup T ool (continued) Note In a system where more than one VN-C11 are used, turn on the power f or a VN-C11 first and proceed the setting to Other Settings with V .Networks Setup T ool. Only then turn on the power f or a second one and go on to Other Settings with V .
23 Note F or connecting VN-C11 with the f actor y settings, either one of the environments described below is required. •E n vironment where no DHCP ser ver e xists. •E n vironment where a DHCP ser ver , which clearly defines the IP address and MA C address allotted to VN-C11, e xists.
24 Back-focus Adjustment <For a fixed-f ocus lens> If f ocus cannot be attained using the f ocus r ing of the lens, adjust the bac k-f ocus as follo ws. 1. Loosen the back-f ocus lock scre w b y tur ning it counterclockwise with a Phillips scre wdriver .
25 Starting Up V .Networks Controller Operations (Step 4 Setting with V .Networks Contr oller) With the installed Controller , camera images can be monitored. The settings for recording, repla y and frame rate etc. can also be perf ormed. 1. Select [Start], [Programs], [V .
26 12 3 4 1 File New : Creates a new file if the camera is con- nected f or the first time. Delete : Deletes a file. Motion Detect Standby : F or selecting the camera f or which motion detection is enabled. Exit : Exits “Controller . ” 2 View Image Size : Sets the image dis- play siz e.
27 1 6 23 4 5 [V .Networks Controller] can be used to select the camera, recor d and pla yback the camera images etc. (The Controller screens are identical with those f or other V .Networks models. Certain functions are not av ailable for VN-C11.) Operations with V .
28 The follo wing environment is required f or vie wing and operating VN-C11 with a W eb browser . It is necessary for the PC to satisfy the tec hnical requirements described in this instruction manual ( ☞ Pag e 6).
29 Access Authorization The structure of URLs within the VN-C11 is as shown belo w . Security level <Operator> <User> <Administrator> Top page (index-e.html) Still image page (still-e.html) Moving image page (java-e.html) Still image URL (still.
30 Start up the web browser . Specify the factory-set web pa ge address of VN-C11. (With the factory-set IP address entered, the web br owser displa ys the VN-C11 top page .) Starting Up the Web Browser Note If a pro xy ser ver is set f or accessing the Internet, there are cases in which the IP address cannot be directly specified.
31 Specifications MAC address BF LOCK U1-32 138 148 41 1/4 – 20UNC 71 70 35 55 42 64.5 LAN standard IEEE802.3, IEEE802.3u Communication protocol TCP/IP , UDP , HTTP , FTP , ICMP , ARP , R TP , R TSP , DHCP , NTP Monitor output Composite video x 1 (75 Ω , 1 Vp-p) Image pickup de vice 1/3 type IT CCD Av ailable pix els Appro x.
32 VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan L WT0105-001A ® is a registered trademark owned b y VICTOR COMP ANY OF J AP AN, L TD . ® is a registered trademark in Japan, the U .S.A., the U .K. and man y other countries. © 2003 VICTOR COMP ANY OF JAP AN, LIMITED VN-C11 V .
Ein wichtiger Punkt beim Kauf des Geräts JVC VN-C11 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC VN-C11 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC VN-C11 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC VN-C11 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC VN-C11 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC VN-C11 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC VN-C11 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC VN-C11. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC VN-C11 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
