Benutzeranleitung / Produktwartung TK-C215VP4E des Produzenten JVC
Zur Seite of 40
DOME CAMERA TK-C215VP4U/E TK-C215VP12U/E INSTRUCTIONS For Customer Use: Enter below the Seri al No. which is located on the body . Retain this information fo r futur e reference. Model No . TK-C215VP4U/E,TK-C215 VP12U/E Ser ial No. LST0519-001A TK-C215VP4_JP.
2 Intr oduction These are general IMPORT ANT SAFEGU ARDS and certain items may not appl y to all appliance s. 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to.
3 Safe ty Pre cautions This Class B digital apparatus complies with Canadian ICES-003. Due to design modifications, data given in this instruction book are subject to possible change without prior notice. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
4 Intr oduction 䢇 The unit is to be powered by a DC 12 V or an AC 24 V power supply . 䢇 The unit is to b e powered b y a UL Listed DC 12 V or an AC 24 V power supply . ( F or U type) 䢇 T he A C 24 V and 12 V DC power supply shall conform to the f ollowing: Class 2 only (F or USA), Isolated power supply only (For Europe).
5 Thank you f or purchas ing this product. (These instr uctions are for : TK-C215VP4 U/TK- C215VP4E/TK-C 215VP12U/TK-C215VP12E. ) Before beginning to operate this unit, please read the instr uction manual carefully in o rder to make sure that the best possible perf ormance is obtained.
6 Intr oduction Intr oduction Saf e ty P recauti ons ......... .... .... .... ..... ...... .... 3 Charact eristics .... .... ..... ...... .......... ........... .. 5 T abl e of Conten ts ......... .... .... ...... ........... .... 6 Precautions f or proper u se of this product .
7 Storage and L ocation o f Use 䢇 Do not install this unit at the f ollowing locations. ● Places that are e x posed to vapor or oil, such as kitchens. ● Places that e xceed the ambient temperature range ( - 10 I to 50 I ). ● Places at which corrosiv e gases are emitted.
8 Intr oduction Main tena nce 䢇 T ur n off the power before performing maintenance. 䢇 Clean the dome cover using a lens cleaning cloth (or soft cloth).
9 Camera A Mo untin g hol e ⳯ 2 Use these when mounting the camera to the ceiling, wall or electrical bo x. ( A Pg. 21)( A Pg. 31) Note: ● T o mount the camera using the electrical bo x, consult the dealer from which this product is purchase d or any nearb y JVC dealer .
10 Intr oduction Camera (conti nued) G Base Mount the base to the ceiling, w all or electrical box bef ore mounting the camera. ( A Pg. 21)( A Pg. 31) H Fastening Screw for Dome Cover This is a f ast ening screw f or the dome cov er . Use a supplied wrench to f asten/ unf as ten the screw .
11 Camera (Interior) M Rota tion Knob ( TK- C215VP4U/E on ly) Rotate the lens unit t o adjust the inclination of the image. ( A Pg. 25) N Rotation Center Mar k ( A Pg. 25) O Fall P reve ntion Wi re Use this to c onnect the base G to the dome cover D .
12 Intr oduction Set the video setting s witches on the camer a unit bef ore mounting it. T o set the switches, use a fine-tipped screwdriver . A [RESET /SPOT] RESET/ SPOT b utton When swit ch #8 is set to [RESET] position and this button is pressed, the value of the white balance or phase adjusted manually is reset t o the default v alue.
13 3. [SYNC] Synchr onization system selection swit ch. This swi tch sets the synchronizi ng system for the camera. INT: This is set f or internal synchronization LL (Line Lock): The camera’ s vertical synchronization is lo ck ed to the AC 24 V 60 Hz or 50 Hz power line frequency .
14 Intr oduction Set the video setting s witches on the camer a unit bef ore mounting it. T o set the switches, use a fine-tipped screwdri v er . A [IRIS LEVEL] Iris level adjustment For adjusting the le v el of the automatic aper ture control lens. This adjustment only needs to be made when required.
15 G Function s electio n swi tche s 1. [ A GC] A uto-gai n cont ro l sw itch. Sett ing th is swit ch to A ON B automatically increases the sensitivity ev en w hen the brightness of the subject is insufficient. (Default setting: ON) 2. [SELECT] WHT .BAL.
16 Installation and Connection ● T ur n off the power of de vices to be used before connecting the cables. ● R ead through the “Instruction Manual” of the de vices to be used carefully before connecting.
17 The maximum connection distance varies with the type of cable used. Please refer carefully to the table f or each cable dur ing connection. * Be s ure to tur n off the power of de vices before connecting cables.
18 Installation and Connection Electrical Spe cifications o f Alarm Input Te r m i n a l s (TK-C215VP12U/E only) ● T o pre v ent penetration of noise i n the internal circuitry , apply a no n-v oltage contact signal to the ALARM input terminal. Ne ver apply a voltage .
19 Foll ow the procedures below t o connect/set this unit. T urn off the power of devices to be used be f ore connecting the cables . K K K K K K The right sequence to connect and se t the camera 䢇 .
20 Installation and Connection Remov e the dome c ov er, f ollowed by setting the video image s witches. 1. Removing the dom e cover Remov e the dome cov er by unf astening the 3 fast ening screws using the wr ench supplied. Memo: ● The dome cover and base are connected with fall pre vention wire.
21 Remov e the camera unit from t he base and mount the base to the ceiling or wall. When mounting to a wall, f ollow t he procedures by replacing areas indicated as [ceiling] by [wall] accordingly . 1. Removing the camera unit from the base A Unfasten the 2 fastening screws from the camera unit us ing a screwdriver .
22 Installation and Connection 1. Connecting t he coaxial cable ( A Pg. 17) Lower the protection cover and connect the connectors. Upon connecting, cov er the connectors using the pr otection cov er.
23 Fill the piping hole and m ounting hole with a sealing mater ial, mount the camera un it to the base, and inser t the s ilica gel. 1. Fill the hole with sealing material Fill the pipi ng hole as well as the 2 mounting holes mounted with screws using a sealing material.
24 Installation and Connection 4. Inserti ng the silica g el supplied T ake out the silica gel from the aluminum package, i nser t it into the silica gel insertion space of the camera unit and fasten using the lug plate.
25 Upon mounting the c amera, adjust the images while checking the actual image. Mounting th e test mo nitor Connect the [MONIT OR] terminal of this unit t o the test monitor to adjust the c amera’ s shoo ting direction, angle of vie w and f ocus. Memo: ● Before setting, ensure to t urn on the power of the system.
26 Installation and Connection Adjusting the ang le of vie w, f ocus and brightness Upon determining the imaging direction, adjust the angle of vie w , f ocus and brightness accordingly . Note: ● When adjusting t he f ocus, mak e sur e to co v er the dome cover o v er the lens .
27 Adjusting the brightn ess Usually , adjustment of the br ightness is not required. When t his is necessar y , adjust the iris lev el accordingly . T o darken : Anti-clockwise direction (L side) T o.
28 Installation and Connection 䡵 TK-C215VP12U/E ● 2 types of angle of vie w may be selected f or TK-C215VP12U/ E. In general, set in a way such that the home position shoots a wide range and the alarm position a narrow range. ● U se the alarm input mode selection switch to set the act ions when there is an alar m input.
29 䢇 R egistering alarm position For registering the angle of view during monitoring when there is an alarm input. 1. Check that the [ALARM POSITION] indicat or ligh t is turned on. Registration of alarm position is enabled. ● Press the [POSITION SELECT ] button if the [ALAR M POS ITI ON ] indic ator ligh t is off.
30 Installation and Connection After setting is complete, mount the inner dome to the camera. 1. Mountin g the inner dome Mount the inner dome to the 3 clips. Note: ● Mount the inner dome suc h that it does not cov er the lens. ● When mounting the inner do me, make sure not to move the position of the lens.
31 Note: ● Make sure that the dome cover is firmly fastened. Otherwise, the humidity le v el may rise, which may result in fogging and e ven f alling of the cov er . ● Ensur e that t he f all pre vent ion wire of the dome cov er is not caught in t he space between the dome cov er and bas e.
32 Installation and Connection Use the piping hole to mount the camer a. Mounting th e came ra using th e piping hole at the bottom su rface of the base 1. Setting th e s witches ( A Pg. 20) 2. Removing the camera unit from the base. ( A Pg. 21 , step 1) 3.
33 Mounting th e came ra using th e piping hole at the side su rface of the base If the camera cannot be mounted directly to the ceiling, mount it t o the pipe using the piping hole at the side sur f ace of the base. 1. Setting th e s witches ( A Pg. 20) 2.
34 Installation and Connection As a general characte ristic unique to CCDs, white-spots may appear on the screen with age. In order to red uce this phenomeno n, this unit is equipped with a white-spot correction feature. Switch on the camera power supply and w ait f or at least 30 minutes.
35 TK-C215VP4_JP.book Pag e 35 Thursday, N ovember 2, 2006 10:51 AM.
36 Other s 䡵 Came ra Signal system: U type : Based on NTSC standard E type : Bas ed on P AL standard Scanni ng freque ncies U type : 15. 734 kHz (Horizontal), 59.
37 䡵 Lens Focal l ength TK-C215VP4 U/E : 2.8 mm to 10 mm (variable) TK-C215VP1 2U/E : 3.8 mm to 45.6 mm (variable) Zoom rat io TK-C215VP4 U/E : Approx. 3.6 TK-C215VP1 2U/E : Approx. 12 Maximum aper ture TK-C215VP4 U/E : F1.3 (f = 2.8 mm) to F3.0 (f = 10 m m) TK-C215VP1 2U/E : F1.
38 Other s 䡵 Dimensional Outl ine Dra wing [Unit: mm (inc h)] * Specifications and appearance of this unit a nd related products are subject to chang e for product improvement wit hout prior notice. Specifications (continued) 9 (3/8) Ǿ 160(6-1/4) 121(4-3/4) 113(4-1/2) Ǿ 160(6-1 /4 5(1/4) 42(1-5/8) 125(4-7/8) SR5 3.
39 F o cus char t TK-C215VP4_JP.book Pag e 39 Thursday, N ovember 2, 2006 10:51 AM.
© 2006 Victor Company of Japan, Limited LST0 519-001A TK-C215VP4U/E TK-C215VP12U/E DOME CAMERA TK-C215VP4_JP.book Pag e 40 Thursday, N ovember 2, 2006 10:51 AM.
Ein wichtiger Punkt beim Kauf des Geräts JVC TK-C215VP4E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC TK-C215VP4E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC TK-C215VP4E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC TK-C215VP4E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC TK-C215VP4E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC TK-C215VP4E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC TK-C215VP4E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC TK-C215VP4E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC TK-C215VP4E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
