Benutzeranleitung / Produktwartung LST0728-001C des Produzenten JVC
Zur Seite of 168
VR-N1600U VR-N1600E VR-N900U LST0728-001C OPERA TE REC CONTROL LIVE/BROW S E S ELECT PTZ/PRE S ET S ERIAL 㧝 㧞 㧟 㧠 㧡 㧢*1/' 㧣 㧥 㧤 .
IMPORTANT SAFEGUARDS I.
SAFETY PRECAUTIONS (for USA) II Please use this unit in an appropriate power source. (VR-N900U) V euillez employer cette unité dans une sour ce d'énergie appropriée.
SAFETY PRECAUTIONS III PRECAUTIONS WHEN MOUNTING RACK CAUTION ● Do not install the VR-N1600U/E/VR-N900U to the rack in places where ambient temperature becomes 40˚C or more. ● When rack mounting, keep the internal temperature of rack assembly 40˚C or less.
IV WARNING (FOR EUROPE): This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. INFORMA T ION (FOR CANADA) RENSEIGNEMENT (POUR CANADA) This Class A digital apparatus complies with Canadian ICES-003.
SICHERHEITSVORKEHRUNG EN (for Germany) V Benutzen Sie bitte diese Maßeinheit in einer passenden Energiequelle..
VI.
SICHERHEITSVORKEHRUNG EN (for Germany) VII.
VIII E/VR-N900U 1600E/VR-N900U E/VR-N900U . 1600E/VR-N900U E/VR-N900U E/VR-N900U.
2 Getting Started A utomatic detection of network cameras Significantly reduces the hassle of comple x camera regi stration procedu res. Built-in large-ca pacity hard disk (500 GB) (VR-N1600U/E) Built.
3 o End-User License Agreement for Milestone's Software embed ded in JVC's NVR products This license agreement is a legally binding agreement among y ou (Y ou, either an individual or a s.
4 Getting Started VR-N1600U/VR-N1600E/VR-N900U (hereinafter referred to as “this de vice”) is installed with W indows 姞 XP Embedded Runtime (hereinafter referred to as “the softw are”), a licensed software fr om Microsoft Corporation.
5 Y ou may use remote access technologies in the softw are such as Remote Desktop to access the software remotely from another de vice. Y ou are responsible f or obtaining any license s required f or use of these protocols to access other software . ● Remote Boot Feature.
6 Getting Started Micr osoft Software License T erms f or: (continued) 4 Window s Update A g ent (al s o kno wn a s S oftware Update S ervice s ). The s oftw a re on the de vice incl u de s Window s U.
7 12 Liability Limitations. Y ou can recov er from Microsoft and its affiliates only direct damages up to two hundr ed fifty U .S. Dollars (U .S. $250.00). Y ou cannot recov er any other damages, includin g consequential, lo st profits, special, indirect or incidental damages.
8 Getting Started Getting Started F eatures ................. ................... ....................... ................. 2 Contents ..... ....................... ...................... .................... ...... 8 Precautions f or Proper Use of this Product .
9 Applications Main Menu List ......... ....................... ...................... .......... 68 List of Menu Screens ............. ....................... ............... 68 Unit Setting 1 ......................... ....................... .......
10 Getting Started Locations of Storage and Use 䢇 Do not place this product at the following locations. Doing so may cause this product to malfunction or break down .
11 Precautions when Moving this Unit 䢇 Remov e all connected cords before moving T ur n off the power and remov e the power plug bef ore moving this unit.
12 Getting Started Fr ont A [OPERA TE] Button/Indicator Switches operation on or off . Pr ess the b utton to tur n operation A ON B and hold down the button to turn operation A OFF B . The indicator blinks while the recorder is starting up or shutting down.
13 M em o : ● The manual reco rding mode e xecute s recording from all cameras regardless of the se ttings in the [Camera Recor d Setting]. Recording is carried out in accordanc e with the frame ra te selected in [Camera Record Se tting]. ( A P age 83) L [ST OP(PB)] Button Stops pla yback when y ou press this b utton in the play back mode.
14 Getting Started Rear P anel U [PO WER] sw itch Switches the power on or off . M em o : ● Be sure to press and hold down the [OPERA TE] button on the front panel to shut down the system bef ore switching off the power supply .
15 Rear I/O T erminals 䡵 Input ports e [ALARM IN 1 to 8] alarm input terminals 1 to 8 Alarm recording is activ ated when signals are input to these terminals. f [EMERGENCY] emergency input terminal Recording is activated in all cameras when a signal is input to this terminal.
16 Getting Started Fr ont Panel A [OPERA TE] Button /Indicator Switches operation on or off . Pr ess the b utton to tur n operation A ON B and hold down the button to turn operation A OFF B . The indicator blinks while the recorder is starting up or shutting down.
17 J [SEARCH] Button Displays the date and time search screen when in the playbac k mode. ( A P age 40) K [KEY] Button When [KEY] button is pressed while pressing [FUNCTION] button, ke y operation on front panel will be disab led. (K ey loc ked mode) T o disab le, perf or m same procedure again.
18 Getting Started Rear P anel W [PO WER] sw itch Switches the power on or off . M em o : ● Be sure to press and hold down the [OPERA TE] button on the front panel to shut down the system bef ore switching off the power supply . X [A C IN 120V H 240VH 50Hz/60 Hz] power input terminal Connect to an A C outlet using the power cab le supplied.
19 Rear I/O T erminals 䡵 Input ports j [ALARM IN 1 to 4] alarm input terminals 1 to 4 Alarm recording is activ ated when signals are input to these terminals. k [EMERGENCY] emergency input terminal Recording is activated in all cameras when a signal is input to this terminal.
20 Getting Started Rear I/O T erminals Rear P anel T erminals T erminal Remarks [ALARM IN ] M em o : ● Set the impedance at t he output end to 10 k K or lower . Make Contact Input [EMERGENCY] [ALARM RES ET] M em o : ● Set the impedance at t he output end to 10 k K or lower .
21 Camera Contr ol T erminal (VR- N900U) Use connection cables according to the table belo w . Also make sure that you read through the instruction manual of the equipment to be connected. (D-sub 9 pin, male) The name of control b uttons and operating methods ma y v ar y between VR-N1600U/E and VR-N900U .
22 Getting Started VR-N1600U/VR-N1600E/VR-N900U is equipped with an operation lock f eature to pre vent the system from being tur ned off accidentally as well as unauthorized recording operations . Setting Operation Lock 1 Press and hold the [FUNCTION] button, and press th e [KEY] button at the same time ● Operation is lock ed.
23 Selecting a Language The [Language Setting] screen appears when you star t up this unit for the first time . Select the language to use using the steps below . 1 Select a langua g e ● Use the [2/ D ] or [10/0/ E ](8/ E ) button to select a language.
24 Getting Started A utomatic Registration of Cameras (continued) 6 Use the [SKI P] button to sel ect [OK], fol lowed by pressing the [1 6/ENTER](ZOOM IN/ENTER) but to n ` ● The [Configure Device] screen appears. 7 Enter the pass wor d for the net work camera ● Press the [KEY] button to displa y the software k eyboard.
25 C Use the [7/ B ](5/ B ) button to displa y the list of cameras ` D Use the [10/0/ E ]( 8/ E ) button to select a camera ` E Use the [SKIP] b utton to select [Set tings...], f ollow ed by pressing the [16/ENTER] (ZOOM IN /ENTER) button ` ● The [Camera Settings] screen appears.
26 Preparation The f ollowing operation s are possible with this system. ● Sur v eillance of up to 16 cameras ( VR -N1600U/E)/9 ca meras (VR-N900U) (live image , recording and pla yback) ● Checkin.
27 N o t e : ● Do not connect LAN1 to the inter net. If the internet is busy or the rela y equipment f ails, you ma y not be able to sav e impor tant camera images . T o maintain full recording capacity , it is recommended that a dedicated network be used.
28 Preparation Y ou can input characters and move the mouse pointers in two diff erent wa ys. ● Operate using the buttons on the front panel. ● Operate b y connecting a m ouse (sold separately). M em o : ● Connecting a mouse eases the specif ication of comple x settings as well as input of characters.
29 Y ou can switch the resolution of the V GA output using the f ollowing procedures. ● Press and hold the [FUNCTION] button, a nd press the [14/ ZOOM OUT](ZOOM OUT/CANCEL) button at the same time . ` B Pressing the button each time incre ases the resolution v alue.
30 Basic Operation Switching the P ower On 1 Connect the po wer cable ● Connect using the power cable supplied to an A C100V (50 Hz/60 Hz) outlet. 2 Tu r n A ON B the power s witch at the rear panel . ● A system check will r un when the power is tur ned on.
31 If [Auto Logon] is set to A off B , the [Login] screen appears after operation has been turned on. (D ef ault setting: A on B ) M em o : ● Y ou can specify the [on]/[off] se tting of [A uto Logon] in [Unit Setting 1] of the main menu.
32 Basic Operation The f ollowing are procedures to open the main menu, which is used for spe cifying various settings. N o t e : ● The input por ts do not oper ate when the main menu is displa yed. Inputs such as alar ms will also be ignored when the main menu is display ed.
33 ● Y ou can view liv e and recorded images using the NVR Viewer . ● NVR View er can also be used f or remote sur veillance of this unit from a PC. ( A P age 126) ● Some of the NVR Vie wer features ma y vary dur ing remote surveillance from a PC .
34 Basic Operation This section describes the procedures f or viewing liv e images by using the front panel of this unit. M em o : ● T o oper ate by connecting a mouse (sold separately), ref er to [Viewing Liv e Images via Mouse Control] ( A P age 36).
35 A Event indicator (Left: yellow) Lights up when ev ents specified in the [Camera Record Setting] occur . The indicator appears black if ev ent indication has not bee n specified for the camera in question, or if no specified ev ent has occurre d. B Motion indicator (Center: red) Lights up when moti on is detected.
36 Basic Operation This section describes the procedures f or viewing liv e images by controlling the mouse. Displaying the [Live] Screen 1 Select [Li ve] from the main men u ● The NVR Viewer starts up and the [Live] screen appears. ● When the [Browse] or [Screen Setup] screen of the NVR View er is displa yed, click the [Liv e] tab .
37 M em o : ● When you ha ve selected a camer a, the blue bar at the top of each liv e image changes to a lighter blue tone. This bar comes with a tri-color square indicator , which indicates the f ollowing features , as well as characters t hat indicate the oper ating status of the camera.
38 Basic Operation Viewing Ima ges Usi ng the PTZ Features (continued) 䡵 Digital Zoom By selecting the [Digital Zoom] check bo x in the [PTZ Control] section, you are ab le to use digital zoom on images from any camera displa yed in the vie w . When digital zoom is enab led, you will see a small ov er view frame at the bottom right corner .
39 M em o : ● If you ha ve selected a camera f or which an audio source has been set on the [Camera Settings] screen of [Camera Record Setting], the preset audio sound is being output.
40 Basic Operation This section describes the proc edures f or viewing recorded images using the front panel of this unit. Displaying the [B r owse] Screen 1 Press the [LIVE/BRO WSE] button wh en the wallpaper or main menu screen is di splay ed ● The NVR Viewer starts up and the [Live] screen appears.
41 Playing, Skipping and Stopping Recor ded Images Control using the [PLA Y], [SKIP], and [ST OP(PB)] buttons. 䡵 Contr ol using the [PLA Y], [SKIP], and [ST OP(PB)] b uttons on the fro nt panel 䢇 P lay in g Ba ck 1 Press the [ PLA Y] b utton ● Pla yback star ts from the date/time indicated on the [Master Time] of [Time Navigation].
42 Basic Operation This section describes the proc edures f or viewing recorded images by controlling the mouse. Displaying the [B r owse] Screen 1 Select [Li ve] from the main men u ● The NVR Viewer starts up and the [Live] screen appears. 2 Double -clic k the [Bro wse] tab on the NVR Vie wer .
43 Select a View For details on the vie w settings, ref er to [Screen Setup] ( A P age 60). 1 Select a view from the [Views] section, or from the view list at the uppe r end of the window N o t e : ● Do not switch the view frequently within a short time inter val.
44 Basic Operation Searc hing Recorded Ima g e Using the Timeline Browser Y ou can search recorded images using the Timeline Browser to the right of the [Browse] screen. The vertically extended timeline sh o ws the recording status and the number of cameras that can be displa yed in the NVR Viewer .
45 Searc hing Recorded Ima g e from the Alert List A list of recorded images is display ed f or each [Alar t], such as when motion is detected ( A P age 105). 1 Double -clic k the [Alerts] bar on the [Br owse] screen 2 Click [ ] on the [Ale rts] list a nd select an event from the list ● Y ou can select a specific e vent, camera or [ Ser ver].
46 Basic Operation Playing, Skipping and Stopping Recor ded Images Use the [Time Navigation] of the NVR Viewer to perf orm pla yback, stop , and skip operations . The buttons and slide rs hav e the f ollowing functions. 䢇 Br owse Butto n N o t e : ● The browse b uttons are only enabled when a camera has been selected.
47 Listening to A udio Sound T o listen to recorded audio sound, select the required audio source from the [A udio Source] list of the [A udio] section. T o te mporar ily mute the liv e audio sound, select the [Mute] check bo x. N o t e : ● The sound ma y become distor ted when audio is pla yed bac k with multiple surveillance computers .
48 Basic Operation Burning a CD/D VD (continued) 5 Select the e xpor t f ormat if you ha ve selected [A VI/JPEG Export...] ● Select either [A VI] (movie clip) or [JPEG] (still image).
49 10 Specify the expor t dest ination T o write data to a CD/D VD , select [CD]. 11 Clic k [Export] ● Expor t begins to prepare for writing data to the CD/D V D . 12 When e xpor t is complete, connect the CD/DVD drive to this unit 13 Press and hold the [FUNC TION] key in fr ont, and press [4 ] on the ke ypad ● The Burn CD/D VD screen appears.
50 Basic Operation Deleting T emporary Files (Operation on the Unit) 1 Select the tempora ry files you want to delete from t he data list. 2 Click the [Erase Sel Data] button A [YES] or [NO] message asking y ou whether to delete the selected data appears.
51 Operation fr om a Sur veillance Computer Follo w the same procedures for [Burning a CD/D VD] from Steps 1 to 9. ( A P age 47) 1 Specify the e xport destination 2 Click [Export] ● Expor t begins. Y ou can print out playbac k images that are displa yed on the screen.
52 Basic Operation Recording Modes 䡵 R ec o rdi n g C on t ro l M od e ( A Pag e 53 ) This mode perf or ms recording according to the [Camer a Record Setting]. The [REC CONTR OL] indicator lights up. Y ou can s witch the recording control mode on or off b y pressing and holding the [REC CONTROL] button.
53 Selecting the Recording Contr ol Mode In order to r ecord in the reco rding control mode, y ou need to specify the scheduler settin gs ( A P age 53), image recording settings ( A P age 55), and pictu re quality settings ( A P age 58) i n the main menu [Camera Record Setting].
54 Basic Operation Scheduler Setting (contin ued) 4 Select [Set ] from [Mode] ● The mouse pointer tur ns into a A pencil B . ● Moving the mouse pointer to the day-of-w eek band in the calendar section enables y ou to zoom in/z oom out on the calendar .
55 䡵 Camera/Alert Scheduler Screen 䢇 Display Bar The displa y bar indicates the active period f or each option ([Online], [E-mail] and [P atrolling]) in diff erent colors. ● Online Bar ● E-mail Bar Activ e periods are indicated in b lue. ● P atrolling Bar Active periods are indicate d in gra y .
56 Basic Operation Settings ( R : Factory settings) Recor ding Camera Images (continued) Item Preset V alues Description A Speedup Settings Frame Rate ^ Enables y ou to specify the frame rate to acqui re from the camera. This is the frame rate during speedup recording.
57 Item Preset V alues Description E Recor ding Setting s (continued) Enable speedup On motion On ev ent Enables y ou to specify whether to ex ecute recording with a higher maximum frame rate when motion is detected or when an e vent o ccurs.
58 Basic Operation Settings (continued) N o t e : ● When the recording progr am (recording ser ver) is operating, the [P TZ Preset P ositions...] button is disabled. T o stop the recor ding server temporarily , press t he [Serv ice Manager ...] button on the [Camera Re cord Setting] screen, follow ed by clicking the [Pause] b utt on.
59 Specifying A udio Recordin g Settings 1 Select [Camera Recor d Setting] from the main menu ● The [Camera Record ing Administator] screen appears. M em o : ● Y ou can also specify audio settings using the follo wing operation. A Click the [+] mark beside the device with an audio source B Select the audio source and ri ght-clic k on it.
60 Basic Operation Renaming Cameras and Assigning Camera Numbers 1 Select a camera name and right -clic k on it, followed by c licking [Edi t] ● The Camera Name and Number edi ting screen appears. N o t e : ● Do not assign a camer a number that is used by other camer as.
61 Creating Groups and Vie ws 䡵 Creating a Gr oup 1 Select [Scr een Setup] from the main menu ● If the [Live] or [Bro wse] scr een is display ed, you can also click on the [Setup] tab using the mouse.
62 Basic Operation Creating Groups and Vie ws (continued) 3 Enter a name for the ne w view ● Ne xt, a dd cameras to the view . ( A P age 63 [Adding Cameras to a Vie w]) 䡵 Renaming a Gr oup/View 1 Select the gr oup or view that y ou want to rename in the Vie ws section.
63 Adding Cameras to a Vie w 1 Select a vie w ● The lay out of the selected view appears. 2 Click the [+] mark to the left of [Server] und er [System O verview] ● A list of a vailable cameras appears .
64 Basic Operation Adjusting Camera Settings (continued) N o t e : ● Set this unit such that the total distr ibu tion frame rate to all sur v eillance computers does not exceed 80 ips ( VR -N1600U/E), 160 ips (VR-N1600U/E(A)), or 30 ips (VR-N900U). ● The recording frame rate ma y deteriorate if you change the picture quality .
65 2 Click and drag the [Caro usel] icon in the [System Overvi ew] section to the position that you want to set in the view 3 Release the mouse but ton at the position 4 Select the pres et carousel po sition and specify its pr oper ties in the [Pr operties] section ● Begin by selecting the cameras to include in the carousel.
66 Basic Operation Adding Hot Spots (Enlar g ed Images) The selected camera within the view is displa yed in the hot spot designated position. Setting the hot spot in a larger position, such as in [1] of the [1+7] view , displays an enlarged image when the hot spot is selected.
67 Using the [Html Page] 1 Click [Html Pa g e] under [System Overview] 2 Drag and dr op at the required position using th e mouse. The [Open URL] screen appears.
68 Applications List of Menu Screens Main Menu List ( A P age 111) ( A P age 116) ( A P age 115) ( A P age 117) ( A P age 69) ( A P age 72) ( A P age 76) ( A P age 80) ( A P age 83) ( A P age 60) ( A .
69 Unit Setting 1 Unit Setting 1 enables y ou to specify settings related to thi s unit, including account configurat ion, error reco very , and seria l por t configuration. I J A B C E F G H D Item Preset V alues Description Reference P age A Pass word Enabl es you to specify the login passw ord for this unit.
70 Applications Unit Setting 1 (continued) Main Menu List (contin ued) Item Preset V alues Description Reference Pag e C Erro r Repor t Enables y ou to select how y ou want to be notified when an error is detected in the system. ^ Dialog ● Select check box Do not select check bo x Select [Dialog] to displa y a war ning dialog on the screen.
71 Item Preset V alues Description Reference Pag e G Serial(VR-N900U) Lets you specify the settings f or the ser ial por ts controlling the cameras. Please ref er to the [Instruction Manual] of the camera in use to configure the parameter s correct ly f or all set tings.
72 Applications Unit Setting 2 Main Menu List (contin ued) C D A B Item Preset V alues Description Re ference Pag e A HDD meter Display at startup Select check bo x ● Do not select check bo x Select this check bo x to display the HDD meter when the system star ts up .
73 OS Setting Enables y ou to specify settings related to the OS, including network, time, and v olume settings. Y ou may need to reboot your computer dependi ng on the settings. 䡵 Network Adapter This section enables y ou to spec ify setti ngs such as the IP address of this uni t.
74 Applications OS Setting (continued) 䢇 When specifying LAN2 (Intranet) settings 䢇 When specifying analog camera network settings (VR-N 900U only) N o t e : ● In VR-N900U , analog input circuitr y is considered as a netwo rk encoder (IP video ser ver) and the IP address is set to A 192.
75 䢇 Other Settings Item Preset V alues Description B Day and Time Pr oper ties T o synchronize the time with the Internet time ser v er or to specify the date and time manually , clic k [Update Now].
76 Applications Image Server Setting This section enab les you to specify settings f or connecting this unit to a computer , and f or displa ying the [Live] and [Br owse] screens. The distribution settings are also ap plied to operation on the [Live ], [Browse], and [Screen Setup] screens of this unit.
77 Item Preset V alues Description A Server Configuration Enables y ou to specify the ser v er name, por t number , and details on e xter nal access to the server . Name ● Server For specifying the ser ver name . Po r t ● 80 For specifying the por t number to use f or the ser v er .
78 Applications Image Server Setting (continued) Main Menu List (contin ued) Item Preset V alues Description B User Administra tion (continued) User Setup... (continued) Add Windows User ... ^ Do not select this option. F or details , consult y our system administrator .
79 M em o : ● The settings f or [Days to log] under [Image Ser v er Setting] - [Log Files] (Item C ) as well as [Days to log] under [A udit Log] (Item D ) are disabled. ● [Camera Record Setting] - [General Settings] - [Logfile Settings]( A P age 106) is enabled.
80 Applications A uto D etect Setting This section enab les you to assign an IP address to eac h camera and configure various auto detect settings. For procedures on using the A uto Detect feat ure, ref er to [A uto Detect Settings] ( A P age 113).
81 B IP Lease Parameter ^ Start Address ● 192.168.0.100 For specifying the first IP address to be assigned to the cameras. Unit ● 20Units 1Unit to 99Units F or selecting the number of IP addresses to be assign ed to the cameras. The selected number of IP addresses will be assigned star ting from the first IP address.
82 Applications N o t e : ● When the A Do not detect in the future. B chec k box on the [Detect Device] screen is selected during automatic detection, the [Detect Device] screen of the said camer a will not appear dur ing subsequent automatic detection operations.
83 Camera Record Setting A C D J E B F H G K L M N O P Q I M em o : ● If you are configuring the [PTZ Preset P ositions...] settings from the [Settings .
84 Applications Main Menu List (contin ued) Item Description Reference Pag e A Service Manager ... Pressing the [Service Manager .. .] button opens a small [Service Manager] screen, which enables y ou to pause/resume the A Recording Server A recording progr am.
85 Optional Installation This section enab les you to install camera driv ers and additional softwares . A B C Item Description A Information on additional softwares Inser t the flash memor y de vice with the additional software sa ved in the root f older and select Optional Installation.
86 Applications T o specify settings on camera c onnection, you first need to add the required de vices, such as network cameras or netw or k encoders (IP video ser v ers), to the system. Devices hav e their own IP addresses and host names. The syst em identifies the de vices based on their IP address or host name.
87 This section describe the procedures to edit the settings of added de vices. 1 Select [Came ra Record Setting] fr om the main men u ● The [Camera Recording Administator] screen appears. 2 Select a de vice in the [De vice Manager] section, and cli ck the [Edit Device.
88 Applications The [Camera Settings] screen enab les yo u to s pecify of the inf or mation on camer as. The number of configur able parameters av aila ble on the [Camera Settings] screen ma y be lim ited if the camera does not come with the PTZ f eatures or if the device connected to the net work encoder (IP video ser v er) is not a camera.
89 [CAMERA CONTR OL] T erminal at the Rear of VR-N900U (VR-N900U) The analog camera acts as a network encoder (IP video ser ver) in the VR-N900U system, and the devi ce name assigned to it is [N900]. The [CAMERA CONTROL] terminal at the rear is assigned as A COM1 B on the Camera Settings screen.
90 Applications Stopping the Recording Server Stop the recording ser v er before defining the PTZ camera settings. 1 Select [Came ra Record Setting] fr om the main men u 2 Click the [Service Manage r .
91 3 Click the [PTZ Preset P ositions ...] button ● The [PTZ Preset P ositions f or Device Name] wi ndow appears. N o t e : ● When using VN-C625U/VN-C655U , the preset pos ition cannot be registered if electronic zoom f eature of camera is functioning.
92 Applications Defining a Preset P osition 1 Displa y the [PTZ Preset P ositions fo r Device Name] window ( A P age 90) 2 Mov e the camera and determine the position using the [PTZ View] 3 Select an item in the [Preset P ositions] list to register the preset posit ion to.
93 A uto P TZ P atrolling PTZ patrolling is a f eature that enab les automatic mov ement of a PTZ camera between se ver al preset positions. 1 Displa y the [PTZ Preset P ositions fo r Device Name] window ( A P age 90) 2 Click the [Setup...] button of [P atrolling] ● The [Setup PTZ Patrolling] screen appears.
94 Applications A uto P TZ P atrol ling (continued) 䡵 Specifying P atrol Timing 1 Select the patr ol scheme tha t you want to define from the [P atrol scheme] list 2 Specify the dura tion (seconds) .
95 The input/output por t is the input/ output ter minal that is f ound on each de vice registered with this unit. Y ou can register the input por t as [Input e vents] , and the output por t as [Outputs...]. A registered input/output por t can be link ed to an ev ent as described below .
96 Applications I/O Settings (continued) 䡵 Specifying an Input Event 1 Select the camera f or spec ifying the event from the [Defined e vents] list on the [ I/O Setup] screen 2 Click the [Add new event...] b utt on ● The [Multiple Input Events] s creen appears.
97 Input/Output T erminal on Rear P anel ● The audio input acts as a network device in the VR-N 1600U/E system, and the de vice name assigned to it is A NVR B . The input/ output ter minals on the rear panel hav e been assigned to the A NVR B de vice by defaul t.
98 Applications Specifying an Output 1 Select the camera f or spec ifying the event from the [Defined e vents] list on the [ I/O Setup] screen 2 Click the [Add ne w output event .
99 N o t e : ● Do not alter these settings unless under special circumstances . Altering the setting unnecessarily may cause the system to malfunction.
100 Applications Specifying Generic Events What is a generic e vent? This is a function that uses TCP or UDP protocol communication as an input ev ent for this unit. When character strings in the communication data receiv ed by the unit matches the predetermined conditions, the correspondi ng generic ev ent is triggered.
101 B Notificati on settings C Event rules stri ng M em o : ● T o specify the timer settin gs fo r a generic ev ent, select the e vent added in Step 2 , and clic k the [Add new e ve nt...] button. Item Description Send e-mail if this e vent occurs Select this check bo x to send an e-mail alert when an e vent occurs.
102 Applications Event Notification Settings When a specific ev ent occurs, th is can be indicated using yellow color in the title bar area at the top of the live image display screen.
103 Camera Output Settings Y ou can assign e xter nal outputs speci fied on the [I/O Setup] screen to a camera, such as sounding of a siren or switching on of lights. ● The assigned outputs can be tr iggered automatically when motion is detected, or manually by pressing the output b uttons.
104 Applications N o t e : ● Before configuring the motion detection settings, it is recommended that y ou complete the settings related to image resolution, compression, and motion detection e xclusion areas.
105 Specifying Motion Detection Motion detection enables y ou to specify the timing to transfer images from the camera, genera te aler ts, and trigger external outputs (lights or sirens). N o t e : ● This f eature is essential to the system’ s operation.
106 Applications Use [Camera Record Setting] - [General Settings] to specify general settings related to the system, such as e-mails. N o t e : ● Do not use the [Enable Protection]/[Chenge P assword.
107 E-mail Settings M em o : ● Y ou can send a test e-mail by clic ki ng the [T est] button. If the e- mail address of the sender is not registered with the mail ser ver of the recipient, t he [The mail address of the sender is not valid. ...] message ma y appear .
108 Applications With the archiving f eature, you can store recorded images up to the maximum av ailable capacity of the hard disk. By defa ult, recorded images receiv ed from cameras are stored in the database f or each camera, and data is automati cally archived when the database is full.
109 䡵 Setting Items and Butt ons M em o : ● NAS is a dedicated file ser ver t hat is connected to the network. In the case of this unit, you can specify NAS as a drive f or archiving data. ● For details on the NAS driv e setti ngs, refer to the [Details] item under [HDD Utility].
110 Applications This section enab les you to specify the database settings. Select a camera from [Main Menu] - [Camera Record Setting] - [De vice Manager], and select - [Settings...]. M em o : ● Recorded image data is referred to as the database in this manual.
111 Y ou can sav e set values to flash memory devices or retriev e data from them. 1 Select [Flash Memory Utility] from the main men u ● The [Flash Memor y Utility] screen appears. 䡵 Save Setting Date The follo wing are procedures to sav e the preset data in the flash memor y de vice.
112 Applications 䡵 Reading Preset Da ta This section describes procedures fo r reading the p reset data from the flash memor y . 1 Inser t the flas h memory d evice into the [SERIAL] terminal on the.
113 This section enab les you to assign an IP address to each camer a and configure various auto detect settings. Specifying IP Lease For configuring the function to as sign IP addresses to each network camera.
114 Applications Using the A uto Detect Feature The A uto Detect feature enab les automatic detection of network cameras . M em o : ● When multicast pac kets are conf igured such that the y do not pass through the network equipment, such as a switching hub , the A uto Detect of the camera ma y not function properly .
115 This option enables y ou to specif y the language y ou want to use. M em o : ● The functions and GUI (graphical user interf ace) are the same as the [Selecting a Language] ( A P age 23) screen that is displa yed when this unit is first switched on.
116 Applications This feature enab les you to chec k the status of the hard disk, and format (initialize), or defr agment (eliminate fragmented space) it. The [Progress indicator] sho ws the progress of f ormatting and defragmentation. 1 Select [HDD Utility ] from the main menu ● The [HDD Utility] screen appears.
117 M em o : ● NAS is a dedicated file ser ver t hat is connected to the network. For th is unit, you can specify t he NAS as a dr ive f or archiving data.
118 Applications User Administration This section describes procedures to configure user accounts and rights. 䡵 User Settings After the [User Administration] screen appears, y ou are able to define individual users and their passw ords. There are two wa ys to add new users .
119 3 Select the us er for which user right is to be specified from the [User] list 4 Select the user’ s glob al rights (not res tricted by cameras) in the [G lobal User Rights] list 5 Select the ca.
120 Applications Master/Slave Settings This section enables you to add/delete NVR u nits as the slav e ser ver . T o use an NVR unit as the mast er ser ver , you need to select the [Designate as Maste r Ser v er] ch eck bo x and register slav e ser vers using the steps below .
121 The follo wing operations are possible when y ou connect this unit to a computer . ● Viewing liv e images on the computer ● Controlling network cameras on the computer ● Viewing recorded images on the computer N o t e : ● Connect the computer to the LAN2 terminal network.
122 Applications 3 Select the n etwork to whic h NVR is connected 4 Right-c lick and se lect [Properties] 5 Chec k to ensure that both the [ Cliant for Microsoft Networks] a nd [Intern et Protocol(TCP.
123 Install the NVR View er on the Computer N o t e : ● Before installing, check to ensure that Microsoft. NET F ramework 2.0, DirectX 9.0 or later versions , and Microsoft Inter net Explorer 6.0 or later v ersions are already installed on the computer .
124 Applications 5 Installa tion complete ● Installation ends and a shor tcut to the A NVR Viewer B is created on the desktop . Login to the NVR Viewer 1 Double-c lick the NVR Vie wer shortcut on the desktop ● When using Windows Vista, right-clic k the icon and select A Run as administrator B to activate NVR View er .
125 Login to NVR Vi ewer (Continued) 2 Specify yo ur login inf ormat ion in the follo wing fields 3 Click the [C onnect] button ● The NVR View er screen appears after a shor t while.
126 Applications Uses of the NVR Viewer For uses of the NVR View er , refer to the f ollowing pages. 䢇 [Viewing Liv e Images via Mo use Control] ( A P age 36) 䢇 [Playing Ba ck Recorded Ima ges via.
127 A udio sound input (such as from a microphone) to the [A UDIO IN 1] terminal is sent to a camera that suppor ts bidirectional audio , and output to the speakers connected to the camera.
128 Applications 5 Press the [ Disconnect] b utton to disconnect t he camera M em o : ● Cameras that are not re gistered in [Camera Record Setting] of the main menu cannot be selected. ● If the audio setting of the camera is set to the half duple x mode, you will not be able to hear audio sound from the camera when in the A Connect B status.
129 This feature pla ys back a specific audio file from the designated destination on the camera or this unit when a generic ev ent registered with this unit is triggered or when alarm signals are input to the rear terminal.
130 Applications A udio Copying This feature enab les you to cop y (register with this unit), delete, perform test pla y , and record audio files used on the [Event A udio Setting] screen. F or mat suppor ted is G711 μ -law monaur al sound. Pla yback time up to 300 seconds is suppor ted.
131 Setting Copy This f eature copies the settings of e vent audio associated with an e vent (audio file name, destination of transmitted audio file, number of deliveries) to another e vent.
132 Applications Comm unication Settings T o mak e use of the ev ent audio feature , you need to receive the communication data f or triggering the generic ev ent issued by an e xter nal device using the e vent audi o prog ram, and transfer it to the aler t por t of this unit.
133 Y ou can display the free space and usage rate of the specified hard disk d rive on the screen. Displaying the HDD Meter 1 Press and hold the [FUNCTION] b utton, and press the [8] ke ypad butt on .
134 Applications When SNMP is enabled, the status of this unit can be monitored from the SNMP manager of the sur v e illance computer . The MIB extension information (JVCNVRMIB.
135 䡵 List of Status that can be Obtained fr om this Unit iso(1) - org(3) - dod(6) - internet(1) - pr ivate(4) - enterprises(1) - jvc(718) - nvr(916) - n vrObjects(1) 䡵 List of TRAP Supported by t.
136 Others Make sure that peripheral de vices are used in accordance with their operating environment. Compatible Netw ork Cameras M em o : ● When VN-V685 and VN-V686B are register ed to NVR, do not enable the audi o device although it is displayed.
137 4 Switch on the po wer of this unit ● If recording is in progress, a [Ne w HDD was found. Are you OK to stop recording and format new HDD?] confir mation message appears. ● Upon clicking [OK], a multipar tition confir mation sc reen appears. (Only when the V R-D ser ies is used) ● Clic k [OK] to star t multipar ti tion.
138 Others Combining a Button with the [FUNCTION] Button 䡵 [FUNCTION] + [REC C ONTR OL] Displa ys the main menu. ( A P age 32 [Opening the Main Menu]) 䡵 [FUNCTION] + [LIVE/BRO WSE](VR-N1600U/E) [FUNCTION] + [ALA RM CLEAR] + [SELECT](VR-N900U) Reboots the NVR Viewer internal distr ibution server .
139 Y ou can record images bef ore and after the occurrence of an ev ent or motion when recording in the recording control mode ( A P age 53). 1 Go to [Set tings] ( A Page 56), and select A Conditiona.
140 Others 䡵 Pa n/Tilt 䡵 Zoom 䡵 Iris 䡵 Focus 䡵 Speed For setting the mov ement speed of the PTZ action to eight different le vels. (1 represents the slow est speed) 䡵 Preset 䡵 Scene 䡵 Night Mode 䡵 Menu 䡵 Exit Exits PTZ camera control M em o : ● Y ou can use the [SKIP] b uttons to change the item to control.
141 This section describes procedures for displa ying various information. 1 Press and hold the [ FUNCTION] button, and press the [6/HOM E](5/HOME) keypad button at the same time ` ● The [Maintenance Information] screen appears.
142 Others Y ou can vie w data exported to a USB memor y de vice, CD-R/R W , or D VD /R-R W on the computer . Star ting the Export Viewer 1 Inser t the USB memor y device containin g the exported data into the USB port of the computer ● The USB memory device is automatically recogniz ed by the computer as a remov able disk.
143 Viewing Exported Data 䡵 Viewing Data on a Specific Date/Time Using Date/Time Sele ction 1 Click the [ K ] button for date selectio n ● A calendar appears.
144 Others 1 Click the [ K ] b utton at the top right corner of the screen 2 Select [Joystick Setup] from the menu that appears 3 Select a joystick from the selected joystick list 4 Specify the set ti.
145 1 Click [HDD Utility] under [Main Menu] ( A P age 116) ● The [HDD Utilit y] screen appears. 2 Clic k [Details] 3 Enter the [ User name] and [P ass word] that are configured on the NAS de vice f .
146 Others The actual recording time varies according to the camera settings, input im age content, and condition of the hard disk. Use the tables belo w as a guide to the recording time . N o t e : ● Recording time ma y be shor tened by appro ximately 10 % according to the condition of the hard disk and the images recorded.
147 N o t e : ● Recording time may be shortened by appro ximately 10 % according to the conditi on of the hard disk and the images recorded. ● Recording time may be shortened due to aging of the hard disk.
148 Others The actual recording time varies according to the camera settings, input im age content, and condition of the hard disk. Use the tables belo w as a guide to the recording time . N o t e : ● Recording ti me may be shor tened b y appro ximately 10 % according to the conditio n of the hard dis k and the images recorded.
149 N o t e : ● Recording time ma y be shor tened by appro ximately 10 % according to the condition of the hard disk and the images recorded. ● Recording time ma y be shor tened due to aging of the hard disk.
150 Others Default V alue List Scheduler [Sc heduler Setting] ( A Pag e 5 3 ) [ ] : F actor y Settings Online [Alwa ys Online] Enable sp eedup [Alwa ys Offline] E-mail [Alwa ys Offline] P atrolling [Alwa ys Offline] Camera Settings [Edit De vice .
151 Motion Detection [Specify ing Motion Detection] ( A P age 105) Sensitivity [40] Motion Sensitivity [640] General Settings [Gen eral Settings] ( A Page 106) Milestone XProtect Central Settings Enable Milestone XProte ct Cent ral Connections [Not Selected] P atrolling Settings Resume P atrol after M anual or Ev ent PTZ(sec.
152 Others Default V alue List (continued) Unit Settings 1 [U nit Setting 1] ( A Pa g e 6 9) Pa s s wo rd [N one] A uto Logon [Selected] Live Live vie wing Auto Start [Selected] Error Repor t Dialog [.
153 OS Settings [OS Setting] ( A Pa g e 7 3 ) Network Adapter Interf ace Name Intel 姞 82566DM Gigabit Network: LAN 1 (Camera Network) (VR-N1600U/E) Realtek R TL8168C(P)/8111C(P) PCI-E Gigabit Ethern.
154 Others Default V alue List (continued) A uto Detect Settings [Auto Det ect Settings] ( A Page 113) IP Lease [Enable] /Disab le IP Lease P arameter Star t Address [192.168.0.100] Unit 1 Unit to/[20Units]/ to 99 Units Subnet Mask [255.255.255.0] Gate way [192.
155 User Administration (Distribution Settings A P age 118) VR-N1600U/E User P assword T ype vr-n1600 [vr-n1600] Basic user Administrator [None] [Windows or Acti ve Directory user] VR-N900U User P ass.
156 Others 䡵 Actions when W arning Indicator Lights Up T r oubleshooting Symptom Action P ower cannot be tur ned on. Check to ensure that the power cab le has been plugged in correctly . Check to ensure that the power s wit ch on the rear panel is switched on.
157 VR-N1600U/E 䡵 General Allowab le Operating T emperature :5 I to 40 I Allowab le Storage T emperature :- 2 0 I to 60 I Allowab le Operating Humidity : 30 % to 80 % P ower Supply VR-1600U : A C 120 V , 50 Hz/60 Hz VR-1600E : AC 220 - 240 V , 50 Hz/60 Hz P ower Consumption VR-1600U : 1.
158 VR-N900U 䡵 General Allowab le Operating T emperature :5 I to 40 I Allowab le Storage T emperature :- 2 0 I to 60 I Allowab le Operating Humidity : 30 % to 80 % P ower Supply : AC 120 H 240 V , 50 Hz/60 Hz P ower Consumption : 1.7 A Mass : Approx.
159.
LST0728-001C NETWORK VIDEO RECORDER VR-N1600U/VR-N1600E/VR-N900U.
Ein wichtiger Punkt beim Kauf des Geräts JVC LST0728-001C (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC LST0728-001C noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC LST0728-001C - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC LST0728-001C reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC LST0728-001C erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC LST0728-001C besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC LST0728-001C verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC LST0728-001C. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC LST0728-001C gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
