Benutzeranleitung / Produktwartung KY-F560 des Produzenten JVC
Zur Seite of 48
KY-F560 KY-F560 COLOUR VIDEO CAMERA INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI *Illustration with optional lens attachment. *Illustration mit montiertem optionalem Objektiv.
E-2 Supplement This equipment is in conf ormity with the provisions and protection requirements of the corresponding European Directiv es. This equipment is designed for prof essional video ap- plianc.
E-3 English WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This unit should be used with 12 V DC only. CAUTION: To prevent electric shocks and fire hazards, do NOT use any other power source. CAUTION To prevent electric shock, do not open the cabinet.
E-4 1. Getting Started Features ............................................................................................................................................... 6 Points to Note During Use ...............................................
E-5 English 5. Setting Via the Menu Screen Flow of Menu Screens ........................................................................................................... ............. 28 Setting Procedures ...........................................
E-6 Features ● Supersensitive and high-performance camera that realizes a horizontal resolution of 850 lines and F13/ 2000 lx via three and a half inch CCD and 12-bit DSP processing.
E-7 English Points to Note During Use • For important shootings, perform trials in advance to ensure that they are properly recorded. • We will not compensate for contents lost due to the malfunction of this unit.
E-8 3 Fastening Screws for Camera Mounting Bracket (M2.6 x 6 mm, 3 pcs) Caution Make sure to use screws that are supplied with this unit. Use of screws that are 6 mm or longer in length may give rise to malfunction of the unit. 4 Camera Mounting Screw Holes (1/4-20UNC) Use when mounting this unit to fixer or swivel bases.
E-9 English 5 [MENU] Menu Button Press this button for 1-2 seconds. Menu screen will be output from the [VIDEO OUT] terminal. Press the button for 1-2 seconds again to clear the menu screen.
E-10 9 [REMOTE] Remote Terminal (Mini DIN 6 Pin, Female) Terminal for connection to remote control unit (RM-LP55 or RM-LP57, both sold separately). ☞ Page 11 ‘Description of Terminals’ ☞ Page 44 ‘Connecting the Remote Control Unit’ 0 [LENS] Lens Connection Terminal Connect the lens cable.
E-11 English Description of Terminals Power Input Terminal (Mini DIN 8 Pin, Female) Remote Terminal (Mini DIN 6 Pin, Female) Lens Connection Terminal (Metal 12 Pin, Female) Notes • Please consult your JVC-authorized dealer on connection of remote terminals.
E-12 ECE-R22 8P 8P MACRO MACRO VC-P893 PC MENU AW BARS SET LENS REMOTE GENLOCK IN VIDEO OUT POWER DC IN SEE INSTRUCTION MANUAL AC ADAPTER AA-P700 ON OFF POWER AC 120 V (FUJINON) RMD-10 RMD-20 (CANON) TCR-101F 2.
E-13 English Applied System The diagram below illustrates connection of an applied system. When connecting • Perform this when the unit is off. • Read the instruction manual of the unit before performing it. • Consult your JVC-authorized dealer on details of the equipment in use of cables with the mark.
E-14 2. Preparation Before Shooting (continued) 1. Loosen by turning the lens lock lever in the anti-clockwise direction. 2. Mount upon ensuring that the pin and mounting hole of the lens are aligned. 3. Fasten by turning the lens lock lever in the clockwise direction.
E-15 English Connecting the Power Supply Connect the [DC IN] terminal at the back of this unit to the [TO CAMERA] terminal of the AC adaptor (AA- P700) using the power cable supplied (2 m). Caution Ensure to make use of AA-P700 for the power supply. When connecting, ensure that power switch of AA-P700 is turned OFF.
E-16 Camera Mounting Bracket is mounted to the bottom surface of the camera when supplied. To mount it to the top surface, do so by removing the 3 fastening screws of the camera mounting bracket. Caution Make sure to use screws supplied with this unit.
E-17 English Precautions to Prevent Camera From Falling ● Special attention is required when mounting to the wall or ceiling. Get a contractor to perform the work and avoid doing it on your own. Unit may fall off and cause injuries or accidents. ● Mount the unit to a secure place using safety cable to prevent it from fall- ing.
E-18 Display the built-in colour bars signal at the camera on the monitor to perform colour/contrast/brightness adjustment. 3. Setting and Adjustment During Shooting External Monitor Adjustment 1. Connect the colour video monitor to the [VIDEO OUT] of this unit.
E-19 English Back Focus Adjustment Zoom Lens 1. Set iris mode switch of lens to M (manual). 2. Set zoom mode switch to M (manual). 3. Turn to open the iris ring. Adjust illumination to obtain the proper image level. 4. Turn the zoom lever to adjust lens to the greatest telephoto position.
E-20 MENU AW BARS SET LENS REMOTE GENLOCK IN VIDEO OUT White balance adjustment includes Auto White, Full-time Auto White (FAW), manual and preset. Setting procedures for Auto White (“AUTO1”,“AUTO2”) 1. Press the [MENU] button for 1-2 seconds.
E-21 English White Balance Adjustment (continued) Error Display When auto white adjustment is not correctly ended, the following message will be displayed for about 3 seconds. ● “NG:OBJECT” (Object Error) Displayed when there is little white colour in the object or when colour temperature is not appropriate.
E-22 MENU AW BARS SET LENS REMOTE GENLOCK IN VIDEO OUT There are cases when white balance is achieved for the center of the screen but not for the upper and lower ends, hence causing other colours to appear with green or magenta. This is brought about by the lens characteristics.
E-23 English 5. Use the [ / ] buttons to select items for “LEVEL(R)”, “LEVEL(G)” and “LEVEL(B)”, then press the [SET] button. The set value starts blinking and adjustment is possible. 6. Refer to the monitor to adjust values for “LEVEL(R)”, “LEVEL(G)” and “LEVEL(B)” using the [ / ] buttons.
E-24 When shooting images of computer monitors or displays, horizontal bands will appear on the screen. To eliminate the bands, it will be necessary to align the shutter speed with the scanning frequency of the monitor. 4. Various Modes of Shooting Shooting the Computer Monitor “EXPOSURE” Screen Computer Monitor 3.
E-25 English It is possible to convert video signals output from the [VIDEO OUT] terminal of this unit into negative images. Output of Negative Image “SYSTEM” Screen “SYSTEM” Screen 2.
E-26 Preparation White Spot Correction As a peculiar common characteristic of CCD, white spots may appear on the screen when operated under high temperature.
E-27 English Notes • The white spot correction feature of this unit does not correct all white spots. Detection and correction of white spots by this unit is performed under the following conditions. White spot correction will not be performed under conditions beyond those stated.
E-28 --- M E N U --- EXP O SU R E . . WH I T E B ALA N C E . . FIL E M .. PR O CES S . . SYST E M . . EX I T AN AGE --- ALC L I MI T EE I M I LI T AE E LE V L AE A ARE AE DETEC ADVA N CED T E .. BAC K PA G E --- --- EXP O SU R E IRIS M O DE AUTO ST E P STEP MA L A U N NO L A M R LE V E L GA I N E LE V L SHUT T ER LE V EL ADVANCED EXPO SURE .
E-29 English • Press the [MENU] button for 1-2 seconds. The normal screen will be displayed. • When the remote control is connected, items that can be operated via the remote control will be dis- played as “REMOTE” on the menu screen. Op- eration of these items via the camera unit will be disabled.
E-30 5. Setting Via the Menu Screen (continued) Setting Procedures 1. Press the [MENU] button for 1-2 seconds. The “MENU” screen will be displayed. 2. Use the [ / ] buttons to select an item, followed by pressing the [SET] button. The submenu screen will be displayed.
E-31 English Item “IRIS MODE” “MANUAL LEVEL” “GAIN” “LEVEL” “EXPOSURE” Screen Function/Variable Values Switch according to the lens in use. “AUTO” : When using auto iris lens “MANUAL” : When using manual iris lens For setting the iris level when “IRIS MODE” is set to “MANUAL”.
E-32 Item “SHUTTER” “LEVEL” “ADVANCED EXPOSURE” “PAGE BACK” Function/Variable Values For switching the shutter mode. “STEP” : Shutter speed can be altered using the “LEVEL” item. “V.SCAN” : Align scan speed of monitor to eliminate horizontal lines that appear when shooting the computer monitor.
E-33 English Function/Variable Values For setting the maximum “ALC” value that triggers automatic switching of gain boost level according to the brightness. {Variable Values: +9,+12,+15, +18dB } For setting the maximum shutter speed when shutter mode is set to “EEI”.
E-34 Function/Variable Values For setting the white balance mode. “AUTO 1” : Set to this to enable automatic adjustment of white balance. “AUTO 2” AUTO 2 Equipped with 2 modes (“AUTO 1” and “AUTO 2”).
E-35 English Item “SHADING” “LEVEL(R)” “LEVEL(G)” “LEVEL(B)” “PAGE BACK” “WHITE BALANCE” Screen (continued) Function/Variable Values For setting whether to perform white shading adjustment. “PRESET” : White shading adjustment disabled.
E-36 Item “MASTER BLACK” “DETAIL” “LEVEL” “V/H BALANCE” “FREQUENCY” “V.RESOLUTION” 5. Setting Via the Menu Screen (continued) “PROCESS (1/2)” Screen Function/Variable Values For adjusting the pedestal level (master black), which is based on the black colour when the lens cap is being put on.
E-37 English Function/Variable Values For setting a white clipping point for video signals of a high luminance level. “108%” : Enable white clipping at point where luminance level is 108%. “100%” : Enable white clipping at point where luminance level is 100%.
E-38 Item “CINEMA” “COLOR MATRIX” “ADJUST..” “GAMMA” “LEVEL” Function/Variable Values “OFF” : Disabled. “ON” : Switches to a gamma curve that is similar to the screen characteristics of movies. Colour matrix switches to the “CINEMA” mode.
E-39 English Item “BLACK” “FLARE” “MASTER” “FLARE(R)” “FLARE(B)” “PAGE BACK” Function/Variable Values For switching gain of the dark portions.
E-40 5. Setting Via the Menu Screen (continued) “MATRIX ADJUST” Screen Settings in bold are factory settings Item “R GAIN” “R ROTATION” “G GAIN” “G ROTATION” “B GAIN” “B ROTATION” “PAGE BACK” Function/Variable Values For manually adjusting the shading of the R axis of the colour matrix (red and cyan).
E-41 English Function/Variable Values For setting the screen size for recorded video signals. “4:3” : Image output at aspect ratio of 4:3. “16:9” : Image output at aspect ratio of 16:9. The vertical resolution deteriorates as compared to the images of 4:3.
E-42 5. Setting Via the Menu Screen (continued) “FILE MANAGE” Screen The following can be performed on the “FILE MANAGE” screen. • Saving menu settings in 3 types of files (A, B and C). • Retrieving stored files (A, B and C). • Resetting menu settings to factory settings.
E-43 English Retrieve file. 1. Use the [ / ] buttons to select “LOAD FILE”, then press the [SET] button. The set value displayed will start to blink. 2. Use the [ / ] buttons to select “A”,“B” and “C”, then press the [SET] button. 3.
E-44 MENU AW BARS SET LENS REMOTE GENLOCK IN VIDEO OUT POWER DC IN SEE INSTRUCTION MANUAL RM-LP55 REMOTE CONTROL UNIT FUNC 1 FUNC 2 W.PA INT GAIN SHUTTER IRIS MANU OPERATE MENU FUNC 1 FUNC 2 ENTER /SET FILE W.
E-45 English List of Remote Control Unit Functions ... Function available ... Function not available Function MODE NEGA CONTOUR GAMMA MASTER BLACK IRIS IRIS DETECT WHITE BALANCE WHITE PAINT GAIN SHUTTER TITLE DISPLAY POSITION TITLE SETTING DATA FILE D-SUB OUT H.
E-46 MENU AW BARS SET LENS REMOTE GENLOCK IN VIDEO OUT POWER DC IN SEE INSTRUCTION MANUAL Å ı ı Installation of Option Card 1. Remove the 2 ı screws for mounting the slot cover Å to remove the slot cover. 2. Insert the option card into the unit.
English E-47 English Specifications Image Pickup Device : 1/2" IT CCD x 3 Scan Mode : Interlace Effective Pixel Nos. : 440,000 Pixels (752 (H) x 582 (V)) Lens Mount : 1/2" Bayonet Mount Colour Separation System : F1.4 3-colour Separation Prism Aspect Ratio : 4:3 Horizontal Resolution : Y: 850 lines and above Registration : 0.
E-48 Dimensional Drawing (Unit: mm) Specifications and appearance of this unit are subject to change for further improvement without prior notice. Specifications (continued) 1/4-inch Screw COLOR VIDEO CAMERA KY-F560 48 14 47 88 80 70 12.4 1 142.8 166.
Ein wichtiger Punkt beim Kauf des Geräts JVC KY-F560 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC KY-F560 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC KY-F560 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC KY-F560 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC KY-F560 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC KY-F560 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC KY-F560 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC KY-F560. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC KY-F560 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
