Benutzeranleitung / Produktwartung NXB-KNX des Produzenten AMX
Zur Seite of 28
Operation/Reference Guide Control System Accessories NXB-KNX NetLinx KNX Interface Initial Release: 5/15/2008.
AMX Limited Warranty and Disclaimer This Limited W arranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partn er which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity .
Table of Contents i NXB-KNX NetLinx KNX Interface Table of Contents Overview ...................... ...................................................................... ................ 1 Product Specifications ......................................
ii NXB-KNX NetLinx KNX Inte rface Table of Contents.
Overview 1 NXB-KNX NetLinx KNX Interf ace Overview The NetLinx NXB-KNX interface (FG2031-01) allo ws AM X NetLinx Integrated Con trollers the ability to control, integrate and communicate with homes and building s that utilize the KNX communication protocol.
Overview 2 NXB-KNX NetLinx KNX Interface NXB-KNX Specifications (Cont.) Operating Environment: • Operating T emperature: 32°F - 104°F (0°C - 40°C) • Relative Humidity: 5% to 85% non-condensing.
Installation 3 NXB-KNX NetLinx KNX Interf ace Installation Wiring and Connections The NXB-KNX is installed be tween the NetLinx Ma ster and the KNX control bus, and passes NetLinx control commands to the KNX control b us via 2-wire twisted pair cabli ng, as indicated in FIG.
Installation 4 NXB-KNX NetLinx KNX Interface PoE (Power Ov er Ethernet) The NXB-KNX uses CA T5/CA T6 wire vi a the Ethernet port for PoE po wer . Use the PS-POE-AF Power ov er Ethernet Injector (FG423-80) to simplify wiring and installation by eliminating t he need for a n A C out let at each point of installation.
Configuration 5 NXB-KNX NetLinx KNX Interf ace Configuration Overview NXB-KNX units hav e a built-in W ebConsole that allows you to make v arious configur ation settings via a web browser on any PC that has access to the NXB-KNX d evice .
Configuration 6 NXB-KNX NetLinx KNX Interface Accessing the WebConsole From any PC that has access to the LAN that the NXB-KNX resides on: 1. Open a web browser and type the IP Address of the target NXB-KNX unit in the Address Ba r . 2. Press Enter to access t he W ebConsole for the specif ied NXB-KNX unit.
Configuration 7 NXB-KNX NetLinx KNX Interf ace Security Settings Select Security Settings from the Admin drop-down menu to open the Security Settings page (FIG. 4). Use the options on the page to specify security opti ons and login information for this NXB-K NX unit.
Configuration 8 NXB-KNX NetLinx KNX Interface Click Accept to sa ve your changes. Note that change s on this page tak e effect immediately . Click Cancel to cancel an y changes. Logging Into the Confi guration Manager (With Se curity Enabled) Login is only required if th e We b and/or Admin security options hav e been enabled on the unit.
Configuration 9 NXB-KNX NetLinx KNX Interf ace Port Settings Select P ort Settings from the Admin drop-do wn menu to open the P ort Settings page (FIG.
Configuration 10 NXB-KNX NetLinx KNX Interface Clock Manager Hov er the cursor over the Clock Manager option in the Admin menu to op en the Clock Manager sub-menu (FIG. 8). Each of the options listed in the s ubmenu are also ac cessible via options on the Clo ck Manager page (FIG.
Configuration 11 NXB-KNX NetLinx KNX Interf ace Click Accept to sav e your changes. Note that change s on this page take ef fect immediately . Click Cancel to cancel an y changes.
Configuration 12 NXB-KNX NetLinx KNX Interface Click Accept to sa ve your changes. Note that change s on this page tak e effect immediately . Click Cancel to cancel an y changes.
Configuration 13 NXB-KNX NetLinx KNX Interf ace Application Upgrade Select Application Upgrade from the Admin drop-do wn menu to open the Application Upgrade page (FIG. 13). This page allows you view informati on on the application file currently lo aded on this unit, and to upload an application .
Configuration 14 NXB-KNX NetLinx KNX Interface Firmware Upgrade Select Firmware Upgrade from the Admin drop-do wn menu to open the F irmwar e Upgrade Manager page (FIG.
Programming - Telnet Comma nds 15 NXB-KNX NetLinx KNX Interf ace Programming - Telnet Commands Overview The NXB-KNX supports T elnet communications. This ty pe of terminal communi cation can be accessed remotely , vi a TCP/IP .
Programming - Telnet Comm ands 16 NXB-KNX NetLinx KNX Interface Terminal Commands The T erminal comman ds listed in the following table can be sent directly to the NXB-KNX via T e lnet terminal session.
Programming - Telnet Comma nds 17 NXB-KNX NetLinx KNX Interf ace Terminal Commands (Cont.) Command Description MEM Displays the largest free block of the NXB-KNX’s memory . Example: >MEM The largest free block of memory is 1 1442776 bytes. MSG ON|OFF Enables/Disables ext ended diagnostic messages.
Programming - Telnet Comm ands 18 NXB-KNX NetLinx KNX Interface Terminal Commands (Cont.) Command Description SET DNS Sets up the DNS configuration. This command prompts you to enter a Domain Name, DNS IP #1, DNS IP #2, and DNS IP #3. Then, enter Y (yes) to approve/store the information in t he NXB-KNX.
Programming - Telnet Comma nds 19 NXB-KNX NetLinx KNX Interf ace Terminal Commands (Cont.) Command Description SET HTTPS PORT Sets the NXB-KNX’ s IP port listened to for HTTPS conne ctions. Note : The NXB-KNX must be rebooted to enable new settings.
Programming - Telnet Comm ands 20 NXB-KNX NetLinx KNX Interface Terminal Commands (Cont.) Command Description SET TELNET PORT Sets the NXB-KNX’s IP port listened to for T elnet connections. Note : The NXB-KNX must be rebooted to enable new settings.
Programming - Telnet Comma nds 21 NXB-KNX NetLinx KNX Interf ace Terminal Commands (Cont.) Command Description SHOW HEAP Displays heap usage statistics. SHOW MEM Displays the memory usage for all memory types. TIME Displays the current time on the NXB-KNX.
Programming - Telnet Comm ands 22 NXB-KNX NetLinx KNX Interface.
Programming - Telnet Comm ands 23 NXB-KNX NetLinx KNX Interf ace.
5/08 © 2008 AMX. All rights reserved. AMX and the AM X logo are register ed trademarks of AMX. AMX reserves the right to alter specifica tions without notice at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.
Ein wichtiger Punkt beim Kauf des Geräts AMX NXB-KNX (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AMX NXB-KNX noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AMX NXB-KNX - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AMX NXB-KNX reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AMX NXB-KNX erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AMX NXB-KNX besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AMX NXB-KNX verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AMX NXB-KNX. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AMX NXB-KNX gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
