Benutzeranleitung / Produktwartung GY-HD101 des Produzenten JVC
Zur Seite of 48
GY -HD100/GY -HD101 HD CAMERA RECORDER INTRODUCTION CONTROLS, INDICA TORS AND CONNECTORS PREP ARATIONS PREP ARATIONS FOR OPERA TION SETTING AND ADJUSTMENTS BEFORE SHOOTING SHOOTING OPERA TION PLA YBAC.
I Impor tant Saf ety Instr uctions 1. Read all of these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ven tilation openings.
II Impor tant Saf ety Instr uctions FOR USA AND CANAD A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2 Thank you for purchasing the JVC GY -HD100U, GY -HD100E a nd GY -HD101E HD CAMERA RECORDER. These instructions are for the GY -HD100U, GY -HD100E and GY -HD101E. The text mainly deals with the GY -HD100U and GY -HD101E. Explanations concerning unique GY -HD100U and GY - HD 101E functions are set off by the (GY -HD100U/GY - HD 101E only) notice.
4 CONTENTS ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INTRODUCTION Precautions for Proper Use . . . . . . . . . . . . . . . . . . . . .
6 INTRODUCTION Precautions for Proper Use •S u p p l y voltage Make sure that the power is between 6.5 V and 7.9 V DC. If the power voltage is too low, abnormal color and increased noise may occur. Do not exceed 7.9 V DC in any case, or the unit could be damaged.
8 INTRODUCTION Battery Pack to be Used The GY -HD100 can use any of the following batteries. •B N -V428, BN-V438 Vi deocassette to be Used •U s e JVC’ s videocassette tapes marked with the A sym- bol. •M ini DV videocassette : M-DV63HD M-DV63PROHD * Do not use M-DV80.
10 CONTROLS, INDICA T ORS AND CONNECT ORS ZOOM Lens (Optional) Th 16 x 5.5BRMU 1 FOCUS ring Manual focus ring. 2 ZOOM lever/ring This is the manual zoom ring equipped with a zoom lever. To a d j u s t t h e zoom manually, turn the zoom mode knob b to position “M”.
12 CONTROLS, INDICA TORS AND CONNECT ORS Rear Section 1 Back tally lamp This lamp lights up when the GY -HD100 enters the record mode. It blinks during the transition to the record mode. When the tape has run out, or the VTR enters the warning mode, it blinks quickly .
14 CONTROLS, INDICA TORS AND CONNECT ORS Right Side Section 1 Monitoring speaker (Ear pad) •I n th e Camera mode, the input sound can be EE moni- tored. In the VTR mode, the speaker outputs the VTR playb ack sound. The sound to be output is selected with the MONITOR SELECT switch e on page 18.
16 CONTROLS, INDICA TORS AND CONNECT ORS Lef t Side Section 1 [DC INPUT] DC connector Power input for 7.2 V DC accepts the supplied AC adapter . X See “AC Oper ati on” on page 31. 2 [LINE OUTPUT] Line output connector ( ) 3.5mm) Output connector for audio signals.
18 CONTROLS, INDICA TORS AND CONNECT ORS To p Section (Cont’d) e [MONITOR SELECT] Au dio monitor selector switch This switch is used to select the mo nitor sound output and playback sound output from the monitoring speaker 1 on page 14 or the PHONES jack 2 on page 12.
20 CONTROLS, INDICA TORS AND CONNECT ORS Indications on the LCD Monitor and in the Viewfinder (Cont’d) St atus Screens in the Camera Mode •S T A T U S 0 1 Event Indication When the Gain or Shutter Speed is changed manually , the setting condition is displayed for about 3 seconds at the time the change is made.
22 CONTROLS, INDICA TORS AND CONNECT ORS Indications on the LCD Monitor and in the Viewfinder (Cont’d) •S T A T U S 1 In addition to the information on the ST ATUS 0 screen, this screen displays the following items. ST AT US 1 Screen 12 3 4 5 6 8 9 0 7 No.
24 CONTROLS, INDICA TORS AND CONNECT ORS Indications on the LCD Monitor and in the Viewfinder (Cont’d) •S T A T U S 2 This screen displays the camera setup statuses.
26 CONTROLS, INDICA TORS AND CONNECT ORS Indications on the LCD Monitor and in the Viewfinder (Cont’d) Auto White Balance Indication (Camera mode only) The AUTO WHITE indication and the result of the operation are displayed during the auto white balance adjustmen t oper- ation.
28 PREP ARA TIONS Basic System *1 An HZ -FM13 cannot be used with a Th16×5.5BRMU or S14×7.3B12 /U zoom lens. Use a FUJINON focus manual unit (FMM-8, CFH-3, CFC-12-990).
30 PREP ARA TIONS Inserting an SD Memory Card By using an SD memory card, you can save and call up menu settings and camera settings for this camcorder. X See “FILE MANAGE Menu Screen” on page 79. Check that the POWER switch is OFF . Inserting an SD Memory Card 1.
32 PREP ARA TIONS Battery Operation Charging the Battery Pack Before use the battery pack should be charged using the pro- vided AC Adapter. *B e s u re to pull the DC cable out of the AC adapter when you charge the battery . 1. Plug the AC cable of the AC Adapter into an AC outlet.
34 PREP ARA TIONS FOR OPERA TION Tu r n i ng the Power ON Tu r ning the Power ON 1. Set the POWER switch to ON. The unit turns on in Camera mode. The operation differs according to whether the unit is in the Camera mode or in the VTR mode. The mode switches each time you press the CAM/VTR button.
36 PREP ARA TIONS FOR OPERA TION Setting and Displaying the Date and Time The date and time of the built-in clock should be set. Powered by the built-in backup battery the set date and time data con- tinue to count even when the power is switched off.
38 PREP ARA TIONS FOR OPERA TION Displaying Time Code The GY -HD100 records SMPTE-standard (NTSC) or EBU- standard (P AL) time codes and user ’s bits. In the play mode or the record mode, the reproduced time codes or user ’s bits are shown on the LCD monitor or in the viewfinder.
40 PREP ARA TIONS FOR OPERA TION Presetting and Recording of Time Code (Cont’d) Presetting time cord data The time code and user’s bit data are preset on the TC/UB/ CL OCK menu screen. 1. Display the TC/UB/CLOCK menu screen. Select the TC/UB/CLOCK item on the TOP MENU screen.
42 PREP ARA TIONS FOR OPERA TION Back Focus Adjustment It is only necessary to perform this when the lens is attached for the first time or when focusing is not correct in both the telephoto and wide-angle positions. •I t i s e a s i er to adjust back focus when the subject is more than 3 meters from the camera.
44 SETTING AND ADJUSTMENTS BEFORE SHOO TING Setting the Video Format Set the video format using the FRAME RATE item and the REC item on the VIDEO FORMA T menu screen. Setting the FRAME RA TE Item 1. Press the ST A TUS button for at least 1 second.
46 SETTING AND ADJUSTMENTS BEFORE SHOOTING Audio Input Signal Selection The GY -HD100 is provided with the INPUT1 connector and the INPUT2 connector for audio input. Select the audio from the INPUT1 connector or the INPUT2 connector using the CH-2 INPUT switch for the au dio to be reco rded in CH-2.
48 SHOO TING OPERA TION Basic Recording Operation 1. Set the POWER switch to ON. •T h e unit turns on in camera mode. 2. Sta r t r e cording. Press the REC/VTR trigger button on the GY -HD100 to start recording. Once recording has started, the FRONT T ALLY lamp and BACK T ALL Y lamp light red.
50 SHOOTING OPERA TION HEADER REC Function When the REC/VTR trigger button is pressed while the STOP button is pressed, this function first records the color bar video an d the test tone (1 kHz sine-wave) of the built-in signal generator at the beginning of the tape.
52 PLA YBA CK MODE Playback Procedure Reco rded pictures can be viewed in the viewfind er , or o n the L CD monitor , or on the monitor connected to the video ou tput connector .
54 USING EXTERNAL COMPONENTS Connecting the Video Signal Cables Connecting the IEEE1394 Cable To r educe the emission of unwanted rad io waves, be sure to attach the provided clamp filter as shown in the figure on the left. •A t t a c h the clamp filter as close to the camcorder as possi- ble, as shown in the figure.
56 USING EXTERNAL COMPONENTS HDV/DV Dubbing CAUTION •S et the IEEE1394 switch on both devices to e ither HDV or DV . •S t a r t reco rding after making sure that both devices are proper ly connected.
58 USING EXTERNAL COMPONENTS Backup Recording CAUTION •S et the IEEE1394 switch on both devices to e ither HDV or DV . •S t a r t reco rding after making sure that both devices are proper ly connected.
60 MENU SCREENS Setting Menu Screens Make the settings while observi ng the LCD monitor or the viewfinder screen. If the OUTPUT CHAR. item on th e OTHERS [1/2] screen is set to ON, the menu screen can also be viewe d on a monitor connected to the video signal output connector.
62 MENU SCREENS VIDEO FORMA T Menu Screen *T h i s i s n o t displayed in VTR mode. Item Function/Setting (bold characters ind icate initial settings) FR AME RATE Sets the fra me rate for shooting. U model 60/30 :S hoots at 480/60i, 480/60p, 720/30p. 50/25 : Shoots at 576/50p, 720/25p.
64 MENU SCREENS CAMERA OPERA TION Menu Screen The CAMERA OPERA TION menu screen is only displayed in the Camera mode. Item Function/Setting (bold characters ind icate initial settings) AE LEVEL Fo r adjusting the image level when using auto iris, “ALC” or “EEI”.
66 MENU SCREENS CAMERA PROCESS [2/2] Menu Screen Item Function/Setting (bold characters ind icate initial settings) WHITE CLIP Sets the white clipping point on input vide o signals with a high luminance level. 108% :T he white clipping point is set at a luminance level of 108%.
68 MENU SCREENS COLOR MA TRIX ADJUST Menu Screen SKIN COLOR ADJUST Menu Screen Wh en you enter the SKIN COLOR ADJUST screen, the areas whe re the skin detail function is applied are displayed in color, and other areas are displayed in black and white.
70 MENU SCREENS AUDIO/MIC Menu Screen In VTR mode, the screen changes to the AUDIO menu screen. *T h i s i s n o t displayed in VTR mode. Item Function/Setting (bold characters ind icate initial settings) T EST TONE Sets whether to output a test audio signal (1kHz, –20dBFS or –12dBFS) during color bar output.
72 MENU SCREENS LCD/VF [2/3] Menu Screen [1/2] screen is displayed in the VTR mode. Item Function/Setting (bold characters ind icate initial settings) VIDEO FORMAT Selects whether to display the video format in the status display on the LCD monitor or the viewfinder.
74 MENU SCREENS TC/UB/CLOCK Menu Screen Ti me codes (TC) and user’s bits (UB) can be set on this screen. Date and time is set on the TIME/DA TE screen that can be reached from this screen. *1 This can be displayed and selected when 60/30 is set for the FRAME RA TE item on the VIDEO FORMA T menu screen.
76 MENU SCREENS TIME/DA TE Menu Screen Item Function/Setting (bold characters ind icate initial settings) DI SPLAY Sets whether the date and time are shown in the status display on the LCD monitor or in the viewfinder. OFF :N o t d i splayed. ON : Displayed.
78 MENU SCREENS OTHERS [2/2] Menu Screen *T h i s i s n o t displayed in VTR mode. Item Function/Setting (bold characters ind icate initial settings) 1 394 REC TRIGGER* Sets how to control the REC trigger command output from the IEEE1394 connector.
80 MENU SCREENS FILE MANAGE Menu Screen (Cont’d) Saving settings Select the STORE FILE.. item on the FILE MANAGE menu screen. 1. Tur n t he SHUTTER dial, bring the cursor ( K ) to SELECT and press the SHUTTER dial. •T he file na me setting area flashes.
82 FEA TURES OF THE CAMERA SECTION How to Use Skin Det ail This function suppresses edge sharpening in the skin color areas of the video signal, enabling velvety, smooth skin tones. Setting the skin detail function color and range 1. Display the ADV ANCED PROCESS menu screen.
84 FEA TURES OF THE CAMERA SECTION Outputting color bars This camcorder can output thre e types of color bars, depend- ing on the camera settings. To output color bars, make the followin g settings. 1. Tu rn the FULL AUTO switch to “OFF”. 2. Set the BARS item on the CAMERA OPERA TION menu screen to “ON”.
86 OTH ERS Wa rnings and Responses (Cont’d) •W a r ning Indications fo r VTR Abnormalities Should malfunctions occur during VTR operation, the unit self-diagnoses the cause and shows the diagnose together with an error code on the LCD monitor or in the viewfinder.
88 OTH ERS Tr o u bleshooting Symptoms Remedy Power cannot be switched ON. • Is po wer supply connected correctly? •I s battery pack recharged? •W as the power turned ON immediately after being turned OFF? Wait at least 5 seconds before turning the power ON again once it h as been turned OFF.
90 OTH ERS Sp ecifications [General] [Camera section] [VTR section] [Connectors] Power requirements : DC 7.2 V , W 2.3 A Power consumption : Approx. 16.5 W (in the Record mode) Dim ensions : 235 (W) × 232 (H) × 341 (D) mm Mass : 3.3 d (7.3 lbs.) (including lens (Th16×5.
Ein wichtiger Punkt beim Kauf des Geräts JVC GY-HD101 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC GY-HD101 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC GY-HD101 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC GY-HD101 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC GY-HD101 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC GY-HD101 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC GY-HD101 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC GY-HD101. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC GY-HD101 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
