Benutzeranleitung / Produktwartung GR-SXM50 des Produzenten JVC
Zur Seite of 28
1 INSTR UCTIONS ENGLISH L YT1201-001A AUTOMA TIC DEMONSTRA TION Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset). • Available when the Power Switch @ is set to “ ” or “ ” while pressing down the Lock Button ! located on the switch.
2 PROVIDED ACCESSORIES • Battery Pack BN-V10U • Cable Adapter • Shoulder Strap • Lens Cap • Power Cord • A/V (A udio/Video) Cable • S-Video Cable (GR-SXM50/SX26 only) NOTE: In order to maintain optimum performance of the camcorder , provided cables may be equipped with one or more core filter .
3 SAFETY PRECAUTIONS PRECAUTIONS W ARNING: T O PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. CAUTIONS • T o prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel.
4 When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper , or cloth etc.
5 INDEX A AC Adapter ................................................................. pg. 6 Animation Recording ................................................ pg. 21 Auto Date Record .................................................... pg. 21 Auto Focus .
6 Battery pack BN-V10U BN-V12U (optional) BN-V20U (optional) BN-V400U (optional) Charging time approx. 1 hr . 30 min. approx. 1 hr . 40 min. approx. 2 hrs.
7 • The following steps have the same function as “ REFRESH ” ( pg. 6). 1. Attach the battery to the camcorder with no cassette inserted. 2. Set the Power Switch @ to “ ” or “ ” while pressing down the Lock Button ! located on the switch.
8 ( u u ( Grip Adjustment 1) Separate the V elcro strip. 2) Pass your right hand through the loop and grasp the grip. 3) Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button 0 and Power Zoom Lever 3 . Refasten the V elcro strip.
9 1 R 4 2 B 2 E 4 5 5 R 0 C 4 M . I M I C 1 G I S N O 2 H N P N . T S G 0 – R 3 – L V P A A I H A T – G S U U – H S L – S T R E A – – E T – E C I 1 – T O 1 – N : 6 1 S 4 – T + M .
10 1 • MENU Wheel [ – , +] ................................ pg. 18 • BRIGHT Wheel [ – , +]* 1 ........................... pg. 1 1 • Speaker V olume Control [VOL.]* 1 ........... pg. 1 1 • TRACKING Wheel [ – , +] .............
11 RECORDING Set REC MODE, S-VHS (S-VHS ET)**, T APE LENGTH and DA TE/TIME in SYSTEM MENU. ( pg. 18 – 22, “ MENU SETTINGS ” ) 1 Remove the lens cap. Set the Power Switch @ to “ ” or “ ” while pressing down the Lock Button ! located on the switch.
12 BASIC FEA TURES Snapshot (GR-SXM50/SX26 only) Y ou can record still images that look like photographs onto a tape. 1) Perform step 1) of “ RECORDING ” ( pg. 1 1). 2) Press SNAPSHOT 2 . • There is a momentary camera shutter-type blackout together with the sound effect of a shutter closing.
13 Video Light (GR-SXM50/FXM4 04 /SX2 6 only) T o brighten the scene when natural lighting is too dim. Pressing LIGHT # changes the V ideo Light mode sequentially as shown below . OFF : T urns of f the light. AU TO : Automatically turns on the light when the camcorder senses insufficient lighting on the subject.
14 T racking Eliminates noise bars that appear on-screen during playback. T o activate Manual T racking: 1) Press the TRACKING Wheel 1 for approx. 2 seconds. “ MT ” z appears. 2) Rotate the TRACKING Wheel 1 so that the noise bars disappear . • T o return to Auto Tracking, press the TRACKING Wheel 1 for approx.
15 Connections T o A TV/VCR 1) Make sure all units are turned off. 2) Connect the camcorder to a TV or VCR. If using both TV and VCR, connect the VCR output to the TV input. 3) T urn on all units. Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
16 Using The Cassette Adapter (optional) Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a S-VHS/ VHS VCR. 1) Slide the battery cover up to remove it, install one “ AA (R6) ” size battery , then reattach the cover .
17 INSTRUCTIONS 1 R 4 2 B 2 E 4 5 5 R 0 C 4 M . I M I C 1 G I S N O 2 H N P N . T S G 0 – R 3 – L V P A A I H A T – G S U U – H S L – S T R E A – – E T – E C I 1 – T O 1 – N : 6 1 .
18 MENU SETTINGS 1 Set the Power Switch @ to “ ” while pressing down the Lock Button ! located on the switch. 2 Press the MENU Wheel 1 in. The Menu Screen appears. Rotate the MENU Wheel 1 to select the desired function. • T o go from CAMERA MENU to SYSTEM MENU, rotate the MENU Wheel 1 to select “ 4 TO SYSTEM MENU ” and press it.
19 M.W .B. If the white balance is correct, all other colours will be accurately reproduced. AU TO : White balance is adjusted automatically . FINE : Outdoors on a sunny day . CLOUD : Outdoors on a cloudy day . HALOGEN : A video light or similar type of lighting is used.
20 SYSTEM MENU This Menu Screen cannot be accessed while recording. REC MODE Allows you to set the recording mode. “ LP ” (Long Play) is more economical, providing twice the recording time. • If the recording mode is switched during recording, the playback picture will be blurred at the switching point.
21 T APE LENGTH Allows you to set the tape length depending on the tape used: T30=30 minutes, T45=45 minutes, T50=50 minutes, T60=60 minutes. • T ape remaining time W is correct only if the correct tape length has been selected. DISPLA Y FULL: Makes all of the indications appear on the LCD monitor*/viewfinder during playback or recording.
22 LCD BRIGHT (Applicable models only) T o adjust the brightness of the LCD monitor, perform the following steps quickly (within approx. 1 second by each interval): 1) Select “ LCD BRIGHT ” in SYSTEM MENU. The “ BRIGHT ON ” message appears. 2) Press the BRIGHT Wheel 1 in to return to normal screen.
23 ADV ANCED FEA TURES Night-Scope (GR-SXM50/SX26 only) Makes dark subjects or areas even brighter than they would be under good natural lighting. 1) Set the Power Switch @ to “ ” or “ ” while pressing down the Lock Button ! located on the switch.
24 Programme AE With Special Ef fects 1) Set the Power Switch @ to “ ” while pressing down the Lock Button ! located on the switch. 2) Press P .AE ^ repeatedly until the desired mode appears. • T o cancel the effect, press P .AE ^ repeatedly until “ OFF ” appears.
25 TROUBLESHOOTING Before consulting your JVC dealer , please check the following to see if you can correct the problem yourself. V ertical white lines appear when shooting a very bright object. • This sometimes occurs when the contrast between the back-ground and the object is great.
26 2. T o prevent damage and prolong service life . . . .... do not subject to unnecessary shock. .... avoid repeated charging without fully discharging. .... charge in an environment where temperatures are within the tolerances shown in the chart below .
27 For Y our Maintenance 1. After Use 1 Set the P ower Switch to “ OFF ” to turn of f the camcorder . 2 Open the LCD monitor* to an angle of over 60 degrees. Slide EJECT to open the cassette holder , then remove the cassette. 3 Close and lock the cassette holder by pressing the Close button.
28 SPECIFICA TIONS Camcorder General Format : S-VHS (GR-SXM50/SX26 only)/ VHS P AL standard Power source : DC 1 1 V (Using AC Adapter) DC 6 V (Using battery pack) Power consumption Viewfinder on : 3.7 W (GR-SXM50/FXM404/ FXM40 only) 3.5 W (GR-SX26/FX16 only) LCD monitor * on : 4.
Ein wichtiger Punkt beim Kauf des Geräts JVC GR-SXM50 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC GR-SXM50 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC GR-SXM50 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC GR-SXM50 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC GR-SXM50 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC GR-SXM50 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC GR-SXM50 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC GR-SXM50. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC GR-SXM50 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
