Benutzeranleitung / Produktwartung GR-SX210A des Produzenten JVC
Zur Seite of 60
LYT0529-001A EN COMPACT VHS CAMCORDER INSTRUCTIONS G R-SXM460A G R-SXM260A G R-SX210A G R-SXM46EA G R-SXM26EA G R-SX21EA VHS PA L 625 ENGLISH CONTENTS SAFETY PRECAUTIONS 2 – 3 MAJOR FEA TURES 4 PROVIDED ACCESSORIES 5 GETTING ST ARTED 6 – 15 RECORDING 16 – 32 Basic Recording .
2 EN Using This Instruction Manual • All major sections and subsections are listed in the T able Of Contents on the cover . • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference.
EN 3 When the equipment is installed in a cabinet or on a shelf, make sure that i t has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper , or cloth etc.
4 EN MAJOR FEA TURES Integrated Auto Light (GR-SXM460A/SXM260A/ SXM46EA/SXM26EA only) ( 墌 pg. 20) Programme AE with Special Effects ( 墌 pg. 23) 䡲 Electronic Fog Filter 䡲 ND Ef fect 䡲 Sepia 䡲 T wilight 䡲 Sports 䡲 Nega/Posi 䡲 1/2000 sec.
EN 5 • R6 (AA) Battery (for Cassetter Adapter) • AC Power Adapter/ Charger AA-V16A or AA-V16AS (GR-SXM460A/ SXM260A/SX210A), AA-V16EA (GR-SXM46EA/ SXM26EA/SX21EA) • Shoulder Strap • DC Cord .
6 EN GETTING ST ARTED Power This camcorder ’ s 3-way power supply system lets you choose the most appropriate source of power . Do not use provided power supply units with other equipment. CHARGING THE BA TTERY P ACK 1 Make sure you unplug the camcorder ’ s DC cord from the AC Power Adapter/Charger .
EN 7 A B A TTENTION: Before detaching the power source, make sure that the camcorder ’ s power is turned off. Failure to do so can result in a camcorder malfunction. USING THE BA TTERY P ACK Hook its end to the camcorder and push the battery pack in until it locks in place .
8 EN Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. 1 Switch off the unit ’ s power and remove the power supply unit (battery pack, AC Power Adapter/Battery Charger , etc.).
EN 9 4 R I T D J D 4 B E N I A L E R A C T T T I M E C . L E P O T K T E / U I T T I M R M I L I D O N E M A M D E N E N E G O . . O O E 0 O F F N 6 F F F G F LIS H Y M D T E E O A I X A N Y M I R T E T H DA T E / T I ME 2 2 0 0 : 0 2 2 0 6 8 0 4 R I T D J D 4 B E N I A L E R A C T T T I M E C .
10 EN GETTING ST ARTED (cont.) SP T30 T T 4 E A R L P E E E TU M L R A E N C N R G O TH O T F 3 F 0 T T T T E 3 4 5 6 X 0 5 0 0 IT TAPE LEN GTH T T 4 E A R L P E E E TU M L R A E N C N R G O TH O T F .
EN 11 Loading/Unloading A Cassette 1 Open the LCD monitor fully (GR-SXM460A/ SXM260A/SXM46EA/SXM26EA only). 2 Slide EJECT until the cassette holder opens. Do not use force to open. 3 Insert or remove a cassette. When inserting, make sure the label is facing outward.
12 EN 4 D T S T 4 N . E – A R E Z L V P E X O E H E T T O S U M M L R A E E N C T N R G O TH O O O T N F F 3 F F 0 O O E N F X F IT S – VHS E T T T 4 E A R L P E E E TU M L R A E N C N R G O TH O T F 3 F 0 Normal Screen Select Wheel MENU Button Power Switch Menu Screen Setting Menu Display: when a VHS cassette is loaded.
EN 13 Recording Playback NOTES about S-VHS and S-VHS ET 䡲 JVC EHG (Extra High Grade) tapes are recommended for superior results. Use S-VHS tape for storing recordings for an extended period or for recording important scenes, as it enables higher-quality recording and playback.
14 EN 1 3 3 2 2 180 ° 180 ° PAUSE GETTING ST ARTED (cont.) Power Zoom Lever Recording Start/Stop Button Set to “ CAMERA ” ( “ AUTO ” or “ PRO. ” ). Grip Adjustment 1 Separate the V elcro strip. 2 Pass your right hand through the loop and grasp the grip.
EN 15 Shoulder Strap Attachment 1 Following the illustration, thread the strap through the eyelet 1 , then fold it back and thread it through the buckle 2 . Repeat the procedure to attach the other end of the strap to the other eyelet 3 , making sure the strap is not twisted.
16 EN 180 ° 90 ° BR I G H T – ––––– 6 ––––– + 25 MI N 120MIN 3MIN 2MIN MIN 119MIN 1MIN 0MIN NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( 墌 pg. 6) ● Recording Mode Setting ( 墌 pg.
EN 17 NOTES: ● When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power (GR-SXM460A/ SXM260A/SXM46EA/SXM26EA only).
18 EN 1X Zoom in (T : T elephoto) Zoom out (W: Wide angle) Power Zoom Lever Zoom indicator bar FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitry extends the maximum magnification offered by optical zoom.
EN 19 5S PAUSE FEA TURE: Quick Review PURPOSE: T o check the end of the last recording. OPERA TION: 1) Set the Power Switch to “ CAMERA ” ( “ AUT O ” or “ PRO. ” ). 2) Press 2 and release quickly during the Record – Standby mode. 䡲 T ape is rewound for approx.
20 EN DANGER 䡲 The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result. 䡲 Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time.
EN 21 Snapshot (GR-SXM460A/SXM46EA only) Use your camcorder like a regular camera and take a snapshot, or several of them in succession. 1 Set the Power Switch to “ AUT O ” or “ PRO. ” . 2 Press SNAPSHOT . If you press during Record-Standby . .
22 EN Fade/Wipe Effects These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end. 1 Set the Power Switch to “ PRO. ” . 2 Press EFFECT repeatedly until the desired mode ’ s name and indication appear .
EN 23 Programme AE With Special Effects 1 Set the Power Switch to “ PRO. ” . 2 Press P .AE repeatedly until the desired mode ’ s name and indication appear . They are displayed for approx. 2 seconds, then the name disappears so that only the indication remains.
24 EN Using Menus For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. 1 Set the Power Switch to “ PRO. ” . 2 Menu access depends on the function you select.
EN 25 Menu Screen A vailable Using The Select W heel CONTINUED ON NEXT P AGE Menu Screen A vailable Using The MENU Button This Menu Screen cannot be accessed while recording. MENU SCREEN EXPLANA TIONS Refer to “ Focusing ” ( 墌 pg. 31). Refer to “ Exposure Control ” ( 墌 pg.
26 EN RECORDING Advanced Features (cont.) Menu Screen A vailable Using The MENU Button (cont.) : Factory-preset ON Records in S-VHS on a VHS or S-VHS cassette ( 墌 pg. 12). OFF Records in VHS on a VHS or S-VHS cassette ( 墌 pg. 12). Allows you to set the tape length depending on the tape used ( 墌 pg.
EN 27 25. 12. 99 25. 12. 99 22 : 25 : 00 22 : 25 : 00 25. 12. 99 (DATE) (TIME) (DATE&TIME) AUTO DATE 1 Set the Power Switch to “ PRO. ” . 2 Press the Select Wheel to display the Menu Screen. 3 Rotate the Select Wheel to move the highlight bar to “ DA TE/TIME DISP .
28 EN RECORDING Advanced Features (cont.) Animation Y ou can give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time. NOTES: Before performing the following steps, make sure that: ● The Power Switch is set to “ PRO.
EN 29 O 1 1 1 5 E F / / X F 4 2 S S IT S S REC T I ME O 1 3 1 5 E F 5 0 X F M M I S S I I T N N IN T . T IM E 1 1 5 S S Select Wheel Recording Start/Stop Button REC TIME Menu Display Recording time indicator Interval time indicator INT . TIME Menu MENU Button INT .
30 EN Exposure Control This feature automatically adjusts the iris for the best available picture quality , but you can override it and make the adjustment manually . Manual exposure adjustment is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright.
EN 31 Focus detection zone Focusing AUTO FOCUS The camcorder ’ s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
32 EN Power Switch White Balance Adjustment A term that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically .
EN 33 1 Load a tape ( pg. 1 1). 2 Set the Power Switch to “ PLA Y ” . T o start playback, press 4 / 6 . • T o stop playback, press 5 . • Press 2 to rewind, or 3 to fast-forward the tape during Stop mode. NOTES: ● The camcorder shuts off automatically after about 5 minutes in Stop mode.
34 EN Set to “PLA Y”. P .AE Button EFFECT Button P .STABILIZER Button PLA YBACK Features COUNTER R/M Button Rewind ( 2 ) Button Fast-Forward ( 3 ) Button Play/Pause ( 4 / 6 ) Button Stop ( 5 ) Button (GR-SXM460A/SXM46EA only) CLASSIC FILM Gives recorded scenes a strobe effect.
EN 35 PLA YBACK Using The Cassette Adapter Compact video cassette VCR Reels Compartment door Recording safety hole Sliding latch Cassette Adapter Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a VHS VCR. It is fully compatible with any S-VHS/VHS video cassette recorder .
36 EN PLA YBACK Connections These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. A/V cable (provided) Y ellow to Video Output TV VCR Connector cover* T o TV or VCR Y ellow to VIDEO A.
EN 37 Basic Connections 1 Make sure all units are turned off. 2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 36). If using a VCR . . . go to step 3 . If not . . . go to step 4 . 3 Connect the VCR output to the TV input, referring to your VCR ’ s instruction manual.
38 EN USING THE REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR.
EN 39 Buttons 1 P AUSE IN Connector 2 MBR SET Button 3 INT . TIME Button SELF TIMER Button* 4 REC TIME Button ANIM. Button 5 FF Button 6 REW Button 7 P AUSE Button 8 PLA Y Button 9 Infrared beam transmitting window 0 ST ART/STOP Button ! VISS Button* @ ZOOM (T/W) Buttons # VCR CTL Button $ A.
40 EN A B 1 1 2 3 1 2 3 1 + – + – 1 2 3 USING THE REMOTE CONTROL UNIT (cont.) Installing The Battery (RM-V700U, optional) The remote control uses one lithium battery (CR2025). 1 : Pull out the battery holder while sliding the lock hole. : Pinch the release tab and pull out the battery holder .
EN 41 Press T Normal playback Remote sensor Playback Zoom (GR-SXM460A/SXM46EA only) T o magnify the recorded image up to 10X at any time during playback. NOTES: ● Use the RM-V716U remote control unit to perform this procedure. ● Make sure that the TBC mode is activated ( pg.
42 EN USING THE REMOTE CONTROL UNIT (cont.) w M – 0 : 12 : 34 REW PLAY INSERT START/STOP PAUSE STOP Insert editing indicator Display COUNTER R/M Button T ape Counter RM-V700U (optional) Remote senso.
EN 43 M – 0 : 05 : e 2 4 0 REW PLAY A.DUB PAUSE STOP Audio Dubbing Y ou can record a new soundtrack on a prerecorded tape. The existing original sound is erased and replaced by the sound from the built-in microphone. Perform steps 1, 2 and 3 of the Insert Editing procedure ( pg.
44 EN VCR CODE LIST 6 2 6 4 7 7 MITSUBISHI 6 7 6 8 NEC 3 7 3 8 GRUNDIG 1 4 3 4 HITACHI 6 6 6 3 PANASONIC 1 3 1 7 1 1 9 4 1 8 JVC 9 1 9 6 9 3 BLAUPUNKT AKAI 9 7 9.
EN 45 MAKE CONNECTIONS 1 JVC VCR EQUIPPED WITH REMOTE P AUSE TERMINAL Connect the editing cable to the Remote P AUSE terminal. JVC VCR NOT EQUIPPED WITH REMOTE P AUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR Connect the editing cable to the R.A.
46 EN SELECT SCENES 4 Point the remote control at the camcorder ’ s remote sensor . Press PLA Y ( 4 ), then press R.A.EDIT ON/OFF (RM-V716U) /ON/OFF (RM-V700U) on the remote control.
EN 47 AUTOMA TIC EDITING TO VCR 9 Rewind the tape in the camcorder to the beginning of the scene you want to edit and press P AUSE ( 6 ). 10 Point the remote control towards the VCR ’ s infrared sensor and press VCR REC STBY ( q6 ), or manually engage the VCR ’ s Record-Pause mode.
48 EN USING THE REMOTE CONTROL UNIT (cont.) 1 1 M / I 2 N S START/STOP INT. TIME REC TIME FEA TURE: Animation and Time-Lapse PURPOSE: The remote control lets you set/release Interval T ime and Recording T ime without using the Menu Screen. OPERA TION: Animation 1) Set Instead of performing steps 1 and 2 on pg.
EN 49 Video Light DANGER: • The video light becomes extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result. • Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time.
50 EN Cassettes T o properly use and store your cassettes, be sure to read the following cautions: 1. During use . . . ... make sure the cassette bears the S-VHS-C or VHS-C mark. ... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals.
EN 51 For Y our Maintenance 1. After Use 1 Set the Power Switch to “ OFF ” to turn off the camcorder . 2 Open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder , then remove the cassette. 3 Close and lock the cassette holder by pressing the Close button.
52 EN TROUBLESHOOTING If, after following the steps in the chart below , the problem still exists, please consult your JVC dealer . The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from functioning properly .
EN 53 SYMPTOM POSSIBLE CAUSE(S) OTHER During recording, the indications do not appear . The tape will not eject. Some functions are not available. V ertical white lines appear when shooting a very bright object. Bright, crystal-shaped spots appear in the LCD monitor and the viewfinder .
54 EN INDEX Controls, Connectors And Indicators U I 3 4 5 6 & ( * y E R Y T t 7 8 0 @ $ % 9 ! # ^ ) ) 1 i o q u p e r w 2 Q W.
EN 55 Controls 1 Dioptre Adjustment Control ................. pg. 14 2 Lens Cover Open/Close Ring ................ pg. 16 3 V ideo Light Switch [LIGHT OFF/AUT O/ON] (GR-SXM460A/SXM260A/ SXM46EA/SXM26EA only) ................... pg. 20 4 • Snapshot Button [SNAPSHOT] (GR-SXM460A/SXM46EA only) .
56 EN INDEX Indications 1 R 4 B 2 2 E 4 5 1 R 5 0 C 4 M / I . M I 2 G C 1 I L N S H O 2 N P T T N . W S G 9 I – – R 9 L V P A I H A – T G S U – U H S – L S T R E – A – E – T E C 6 I 1 T . – O 1 – N : – S 4 T + M – 5 4 0 W – : 0 2 B 1 + 8 1X 7 8 9 0 ! # $ @ * & ^ % 5 3 4 1 2 ( 6 a b 1 T ape Remaining Time .
EN 57 W arning Indications Indications Function Displays the battery remaining power . Remaining power level: high. It does not necessarily mean that the battery pack is fully charged. Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks (battery power warning).
58 EN SPECIFICA TIONS Camcorder General Format : S-VHS/VHS P AL standard Power source : DC 6.0 V Power consumption LCD monitor* off, viewfinder on : 4.2 W (GR-SXM460A/SXM260A/SXM46EA/SXM26EA) 3.7 W (GR-SX210A/SX21EA) LCD monitor* on, viewfinder off : 4.
EN 59 Connectors JLIP : ø 3.5 mm, 4-pole, mini-head jack (compatible with RC-5325 plug) V ideo : 1 V (p-p), 75 Ω unbalanced, analogue output (via V ideo output connector) Audio : 300 mV (rms), 1 k Ω analogue output (via Audio output connector) S-Video : Y : 1 V (p-p), 75 Ω , analogue output C : 0.
® Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. COPYRIGHT© 2000 VICTOR COMPANY OF JAPAN, LTD. A/EA Printed in Japan 0200MKV * UN * SN VICTOR COMP ANY OF JAPAN, LIMITED EN G R-SXM460A G.
Ein wichtiger Punkt beim Kauf des Geräts JVC GR-SX210A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC GR-SX210A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC GR-SX210A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC GR-SX210A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC GR-SX210A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC GR-SX210A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC GR-SX210A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC GR-SX210A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC GR-SX210A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
